tool=${tool%/*}
. "$tool"/lib/rule.sh
. "$tool"/etc/vm.sh
+export TRACE=1
rule_help () { # SYNTAX: [--hidden]
local hidden; [ ${1:+set} ] || hidden=set
git config --replace branch.master.merge refs/remotes/master
local tool
tool=$(cd "$tool"; cd -)
- sudo ln -fns "$tool"/vm_hosted /usr/local/sbin/
- sudo ln -fns "$tool"/vm_hosted /usr/local/sbin/vm
+ install -m 770 /dev/stdin .git/hooks/post-update <<-EOF
+ #!/bin/sh -efux
+ case \$1 in
+ (refs/remotes/master)
+ cd ..
+ git --git-dir=\$PWD/.git checkout -f -B master remotes/master
+ git --git-dir=\$PWD/.git clean -f -d -x
+ ;;
+ esac
+ EOF
)
}
rule_git_reset () {
)
}
+rule_adduser () {
+ local user="$1"; shift
+ getent passwd "$user" >/dev/null ||
+ sudo adduser "$@" "$user"
+ }
rule_apt_get_install () { # SYNTAX: $package
- sudo DEBIAN_FRONTEND=noninteractive apt-get install "$@"
+ sudo \
+ DEBIAN_FRONTEND=noninteractive \
+ DEBIAN_PRIORITY=low \
+ apt-get install --yes "$@"
}
rule_dpkg_reconfigure () { # SYNTAX: $package
- sudo DEBIAN_FRONTEND=noninteractive dpkg-reconfigure "$@"
+ sudo \
+ DEBIAN_FRONTEND=noninteractive \
+ DEBIAN_PRIORITY=low \
+ dpkg-reconfigure "$@"
}
rule__chrooted_configure () { # NOTE: est-ce bien utile à un moment ?
. /etc/profile
}
-rule_apache2_configure () {
+rule_apache2_configure () { # XXX: cette règle n'est pas testée/mise-à-jour
local -; set +f
rule apt_get_install \
apache2-mpm-itk \
# cependant l'usage de suexec impose des forks il semble..
# et mod_proxy_fcgi n'apparaît que dans apache 2.4 ;
# donc pour l'instant : apache2-mpm-itk
- rule www_configure
+ sudo rm -rf \
+ /etc/apache2/site.d
+ sudo install -d -m 770 -o www -g www \
+ /etc/apache2 \
+ /etc/apache2/site.d \
+ /etc/apache2/x509.d
cat /dev/stdin "$tool"/etc/apache2/apache2.conf <<-EOF |
ServerName "$vm_fqdn"
EOF
/home/www/etc/apache2
for conf in "$tool"/etc/apache2/site.d/*/VirtualHost.conf
do conf=${conf#"$tool"/etc/apache2/site.d/}
- local port site
- IFS=. read -r port domain <<-EOF
- ${conf%\/VirtualHost\.conf}
- EOF
- assert 'test "${port:+set}"'
- assert 'test "${domain:+set}"'
- local site="$port.$domain"
- case $port in
- (443)
+ local site=${conf%/VirtualHost.conf}
+ case $site in
+ (*-tls)
local hint="run vm_remote apache2_key_send before"
assert "sudo test -f /etc/apache2/site.d/\"$site\"/x509/key.pem" hint
- sudo install -d -m 770 -o www."$site" -g www."$site" \
+ sudo install -d -m 770 -o www-"$site" -g www-"$site" \
/etc/apache2 \
/etc/apache2/site.d/"$site" \
- /etc/apache2/site.d/"$site"/x509 \
- /etc/apache2/site.d/"$site"/x509/ca \
- /etc/apache2/site.d/"$site"/x509/empty \
- /etc/apache2/site.d/"$site"/x509/rvk \
- /etc/apache2/site.d/"$site"/x509/usr
+ /etc/apache2/x509.d/"$site" \
+ /etc/apache2/x509.d/"$site"/ca \
+ /etc/apache2/x509.d/"$site"/empty \
+ /etc/apache2/x509.d/"$site"/rvk \
+ /etc/apache2/x509.d/"$site"/usr
sudo install -m 664 -o www -g www \
- "$tool"/var/pub/x509/"$site"/crt.self-signed.pem \
- /etc/apache2/site.d/"$site"/x509/crt.self-signed.pem
- #sudo install -m 664 -o www."$site" -g www."$site" \
+ "$tool"/var/pub/x509/"$site"/crt.self-signed.pem \
+ /etc/apache2/x509.d/"$site"/crt.self-signed.pem
+ #sudo install -m 664 -o www-"$site" -g www-"$site" \
# "$tool"/var/pub/x509/"$site"/rvk.pem \
- # /etc/apache2/site.d/"$site"/x509/rvk.pem
+ # /etc/apache2/x509.d/"$site"/rvk.pem
sudo install -m 664 -o www -g www \
"$tool"/var/pub/x509/"$site"/ca/crt.self-signed.pem \
- /etc/apache2/site.d/"$site"/x509/ca/crt.pem
+ /etc/apache2/x509.d/"$site"/ca/crt.pem
sudo install -m 664 -o www -g www \
- "$tool"/var/pub/x509/"$site"/crt.pem \
- /etc/apache2/site.d/"$site"/x509/crt.pem
+ "$tool"/var/pub/x509/"$site"/crt.pem \
+ /etc/apache2/x509.d/"$site"/crt.pem
;;
esac
- case $port in
- (80)
- cat <<-EOF
- <VirtualHost *:$port>
- AssignUserID www.$site www.$site
- CustomLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/access/%Y-%m-%d.log 86400 60" Combined
- #CustomLog "/dev/null" Combined
- DocumentRoot /home/www/pub/$site
- ErrorLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/error/%Y-%m-%d.log 86400 60"
- #ErrorLog "/dev/null"
- ServerName $domain
- LogLevel Warn
- $(cat "$tool"/etc/apache2/site.d/"$site"/VirtualHost.conf)
- </VirtualHost>
- EOF
- ;;
- (443)
+ case $site in
+ (*-tls)
cat <<-EOF
<IfModule mod_ssl.c>
<VirtualHost *:$port>
- AssignUserID www.$site www.$site
+ AssignUserID www-$site www-$site
BrowserMatch "MSIE [2-6]" ssl-unclean-shutdown nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
CustomLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/access/%Y-%m-%d.log 86400 60" Combined
ErrorLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/error/%Y-%m-%d.log 86400 60"
#ErrorLog "/dev/null"
LogLevel Warn
- ServerName $domain
- SSLCACertificateFile /etc/apache2/site.d/$site/x509/crt.self-signed.pem
- SSLCACertificatePath /etc/apache2/site.d/$site/x509/usr/
- #SSLCARevocationFile /etc/apache2/site.d/$site/x509/rvk.pem
- SSLCADNRequestFile /etc/apache2/site.d/$site/x509/crt.self-signed.pem
- SSLCADNRequestPath /etc/apache2/site.d/$site/x509/empty/
+ SSLCACertificateFile /etc/apache2/x509.d/$site/crt.self-signed.pem
+ SSLCACertificatePath /etc/apache2/x509.d/$site/usr/
+ #SSLCARevocationFile /etc/apache2/x509.d/$site/rvk.pem
+ SSLCADNRequestFile /etc/apache2/x509.d/$site/crt.self-signed.pem
+ SSLCADNRequestPath /etc/apache2/x509.d/$site/empty/
# NOTE: ne publie pas les certificats d’utilisateur-ice-s acceptés
- SSLCARevocationPath /etc/apache2/site.d/$site/x509/rvk/
- SSLCertificateChainFile /etc/apache2/site.d/$site/x509/ca/crt.pem
- SSLCertificateFile /etc/apache2/site.d/$site/x509/crt.pem
- SSLCertificateKeyFile /etc/apache2/site.d/$site/x509/key.pem
+ SSLCARevocationPath /etc/apache2/x509.d/$site/rvk/
+ SSLCertificateChainFile /etc/apache2/x509.d/$site/ca/crt.pem
+ SSLCertificateFile /etc/apache2/x509.d/$site/crt.pem
+ SSLCertificateKeyFile /etc/apache2/x509.d/$site/key.pem
SSLCipherSuite AES+RSA+SHA256
SSLEngine On
SSLInsecureRenegotiation Off
</IfModule>
EOF
;;
+ (*)
+ cat <<-EOF
+ <VirtualHost *:$port>
+ AssignUserID www-$site www-$site
+ CustomLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/access/%Y-%m-%d.log 86400 60" Combined
+ #CustomLog "/dev/null" Combined
+ DocumentRoot /home/www/pub/$site
+ ErrorLog "|/usr/sbin/rotatelogs /home/www/log/$site/apache2/error/%Y-%m-%d.log 86400 60"
+ #ErrorLog "/dev/null"
+ LogLevel Warn
+ $(cat "$tool"/etc/apache2/site.d/"$site"/VirtualHost.conf)
+ </VirtualHost>
+ EOF
+ ;;
esac |
sudo install -m 660 -o root -g root /dev/stdin \
/etc/apache2/site.d/"$site"/VirtualHost.conf
sudo ln -fns \
../site.d/"$site"/VirtualHost.conf \
/etc/apache2/sites-available/"$site"
- sudo install -d -m 770 -o www."$site" -g www."$site" \
+ sudo install -d -m 770 -o www-"$site" -g www-"$site" \
/home/www/log/"$site" \
/home/www/log/"$site"/apache2
sudo ln -fns \
/etc/apache2/site.d/"$site" \
/home/www/etc/apache2/"$site"
test -e /home/www/pub/"$site" ||
- sudo install -d -m 770 -o www."$site" -g www."$site" \
+ sudo install -d -m 2770 -o www-"$site" -g www-"$site" \
/home/www/pub/"$site"
- getent passwd www."$site" >/dev/null ||
- sudo adduser \
+ rule adduser www-"$site"
--disabled-password \
--group \
--no-create-home \
--home /home/www/pub/"$site" \
--shell /bin/false \
- --system \
- www."$site"
- #sudo setfacl -m u:"www.$site":--x \
+ --system
+ #sudo setfacl -m u:"www-$site":--x \
# /home/www/ \
# /home/www/pub/ \
# /home/www/pub/"$site"/
- #sudo setfacl -m d:u:"www.$site":rwx \
+ #sudo setfacl -m d:u:"www-$site":rwx \
# "$home"/pub/www/"$site"/
test ! -r "$tool"/etc/apache2/site.d/"$site"/configure.sh ||
. "$tool"/etc/apache2/site.d/"$site"/configure.sh
sudo service apache2 restart
}
rule_apt_configure () {
- sudo install -m 660 -o root -g root /dev/stdin /etc/apt/sources.list <<-EOF
- deb http://ftp.fr.debian.org/debian $vm_lsb_name main contrib non-free
+ sudo install -m 664 -o root -g root /dev/stdin /etc/apt/sources.list <<-EOF
+ deb http://ftp.rezopole.net/debian $vm_lsb_name main
+ EOF
+ sudo install -m 664 -o root -g root /dev/stdin /etc/apt/sources.list.d/$vm_lsb_name-backports.list <<-EOF
+ deb http://ftp.rezopole.net/debian $vm_lsb_name-backports main
EOF
- sudo install -m 660 -o root -g root /dev/stdin /etc/apt/$vm_lsb_name-backports.list <<-EOF
- #deb http://backports.debian.org/debian-backports $vm_lsb_name-backports main contrib non-free
+ sudo install -m 664 -o root -g root /dev/stdin /etc/apt/sources.list.d/openerp.list <<-EOF
+ deb http://nightly.openerp.com/7.0/nightly/deb/ ./
EOF
- sudo install -m 660 -o root -g root /dev/stdin /etc/apt/preferences <<-EOF
+ sudo install -m 664 -o root -g root /dev/stdin /etc/apt/preferences <<-EOF
Package: *
Pin: release a=$vm_lsb_name
- Pin-Priority: 170
+ Pin-Priority: 200
Package: *
Pin: release a=$vm_lsb_name-backports
- Pin-Priority: 200
+ Pin-Priority: 170
EOF
sudo apt-get update
rule apt_get_install apticron
- sudo install -m 644 -o root -g root /dev/stdin /etc/apticron/apticron.conf <<-EOF
- EMAIL="admin@$vm_domainname"
- # DIFF_ONLY="1"
- # LISTCHANGES_PROFILE="apticron"
- # ALL_FQDNS="1"
- # SYSTEM="foobar.example.com"
- # IPADDRESSNUM="1"
- # IPADDRESSES="192.0.2.1 2001:db8:1:2:3::1"
- # NOTIFY_HOLDS="0"
- # NOTIFY_NEW="0"
- # NOTIFY_NO_UPDATES="0"
- # CUSTOM_SUBJECT=""
- # CUSTOM_NO_UPDATES_SUBJECT=""
- # CUSTOM_FROM="root@$vm_fqdn"
- EOF
+ m4 \
+ --define=VM_DOMAINNAME=$vm_domainname \
+ <"$tool"/etc/apticron/apticron.conf.m4 |
+ sudo install -m 644 -o root -g root /dev/stdin \
+ /etc/apticron/apticron.conf
}
rule_boot_configure () {
#warn "lors de l'installation Debian, surtout n'installer GRUB sur AUCUN disque proposé !"
# et davantage sécurisant.
EOF
}
-rule_dovecot_configure () {
- rule apt_get_install dovecot-imapd dovecot-managesieved dovecot-sieve
- local hint="run vm_remote dovecot_key_send before"
- assert "sudo test -f /etc/dovecot/\"$vm_domainname\"/imap/x509/key.pem" hint
- sudo install -m 400 -o root -g root \
- "$tool"/var/pub/x509/$vm_domainname/imap/crt+crl.self-signed.pem \
- /etc/dovecot/$vm_domainname/imap/x509/crt+crl.self-signed.pem
- sudo install -d -m 770 -o root -g root \
- /etc/skel/etc/mail \
- /etc/skel/etc/sieve
- sudo install -d -m 1777 -o root -g root \
- /var/lib/dovecot-control \
- /var/lib/dovecot-index
- sudo install -m 664 -o root -g root /dev/stdin /etc/dovecot/local.conf <<-EOF
- auth_ssl_username_from_cert = yes
- listen = *
- log_timestamp = "%Y-%m-%d %H:%M:%S "
- mail_debug = yes
- mail_location = maildir:~/var/mail:INDEX=/var/lib/dovecot-index/%u:CONTROL=/var/lib/dovecot-control/%u
- # NOTE: INDEX et CONTROL sont sur une partition sans quota comme le demande la doc
- # VOIR: http://wiki2.dovecot.org/Quota/FS
- mail_plugins = \$mail_plugins quota
- mail_privileged_group = mail
- passdb {
- args = /home/%u/etc/dovecot/passwd
- driver = passwd-file
- }
- plugin {
- quota = fs:user
- recipient_delimiter = +
- sieve = ~/etc/mail/filter.sieve
- sieve_dir = ~/etc/mail/sieve
- sieve_global_dir = /var/lib/dovecot/sieve/global/
- sieve_max_script_size = 1M
- sieve_quota_max_scripts = 0
- sieve_quota_max_storage = 10M
- sieve_user_log = ~/var/log/mail/sieve.log
- }
- protocol imap {
- mail_plugins = \$mail_plugins imap_quota
- }
- protocol lda {
- auth_socket_path = /var/run/dovecot/auth-master
- hostname = $vm_domainname
- info_log_path =
- log_path =
- mail_plugins = \$mail_plugins sieve
- postmaster_address = contact+dovecot+lda@$vm_domainname
- syslog_facility = mail
- }
- protocols = imap sieve
- service auth {
- user = root
- unix_listener /var/spool/postfix/private/auth {
- mode = 0660
- user = postfix
- group = postfix
- }
- }
- ssl_ca = </etc/dovecot/$vm_domainname/imap/x509/crt+crl.self-signed.pem
- ssl_cert = </etc/dovecot/$vm_domainname/imap/x509/crt+crl.self-signed.pem
- ssl_cipher_list = AES256-SHA
- ssl_key = </etc/dovecot/$vm_domainname/imap/x509/key.pem
- ssl_verify_client_cert = yes
- userdb {
- driver = passwd
- }
- verbose_ssl = no
- EOF
- sudo install -m 755 -o root -g root /dev/stdin /usr/local/bin/dovecot-passwd <<-EOF
- #!/bin/sh -efux
- # DESCRIPTION: permet à un-e utilisateurice d'initialiser ellui-même son mot-de-passe dovecot.
- install -d -m 770 ~/etc/dovecot
- install -m 640 /dev/stdin ~/etc/dovecot/passwd <<_EOF
- \$USER:\$(/usr/bin/doveadm pw -s SHA512-CRYPT):::::::
- _EOF
- EOF
- sudo install -m 664 -o root -g root /dev/stdin /etc/postgrey/whitelist_recipients.local <<-EOF
- EOF
- sudo service dovecot restart
+rule_duplicity_configure () {
+ rule apt_get_install duplicity
+ home="/home/backup"
+ rule adduser backup \
+ --disabled-password \
+ --group \
+ --home "$home" \
+ --shell /bin/bash \
+ --system
+ sudo usermod --home "$home" backup
+ sudo install -d -m 750 -o backup -g backup \
+ "$home" \
+ "$home"/etc \
+ "$home"/etc/gpg \
+ "$home"/etc/ssh
+ sudo install -d -m 770 -o backup -g backup \
+ "$home"/mysql \
+ "$home"/postgres
+ getent group sudo backup |
+ while IFS=: read -r group x x users
+ do while test -n "$users" && IFS=, read -r user users <<-EOF
+ $users
+ EOF
+ do eval local home\; home="~$user"
+ sudo cat "$home"/etc/ssh/authorized_keys
+ done
+ done |
+ sudo install -m 640 -o backup -g backup /dev/stdin \
+ "$home"/etc/ssh/authorized_keys
+ sudo ln -fns etc/gpg "$home"/.gnupg
+ #sudo adduser backup mysql-data
+ #sudo adduser backup postgres-data
}
rule_etckeeper_configure () {
sudo install -m 644 -o root -g root /dev/stdin /etc/etckeeper/etckeeper.conf <<-EOF
rule apt_get_install etckeeper
}
rule_filesystem_configure () {
- sudo install -m 644 -o root -g root /dev/stdin /etc/fstab <<-EOF
- # <file system> <mount point> <type> <options> <dump> <pass>
- LABEL=${vm_lvm_lv}_boot /boot ext2 defaults 0 0
- proc /proc proc defaults 0 0
- sysfs /sys sysfs defaults 0 0
- /dev/mapper/${vm_lvm_lv}_root_deciphered / ext4 defaults,errors=remount-ro,acl,barrier=1,noatime 0 1
- /dev/mapper/${vm_lvm_lv}_var_deciphered /var ext4 defaults,errors=remount-ro,acl,barrier=1,noatime 0 1
- /dev/mapper/${vm_lvm_lv}_home_deciphered /home ext4 defaults,errors=remount-ro,acl,barrier=1,noatime,usrquota,grpquota 0 0
- # NOTE: barrier=1 réduit drastiquement les performances d'écriture, mais garantit la cohérence du système de fichiers.
- /dev/mapper/${vm_lvm_lv}_swap_deciphered swap swap sw 0 0
- EOF
- sudo install -m 644 -o root -g root /dev/stdin /etc/crypttab <<-EOF
- # <target name> <source device> <key file> <options>
- ${vm_lvm_lv}_root_deciphered /dev/$vm_lvm_vg/${vm_lvm_lv}_root none luks,lvm=$vm_lvm_vg
- ${vm_lvm_lv}_var_deciphered /dev/$vm_lvm_vg/${vm_lvm_lv}_var ${vm_lvm_lv}_root_deciphered luks,lvm=$vm_lvm_vg,keyscript=/lib/cryptsetup/scripts/decrypt_derived
- ${vm_lvm_lv}_home_deciphered /dev/$vm_lvm_vg/${vm_lvm_lv}_home ${vm_lvm_lv}_root_deciphered luks,lvm=$vm_lvm_vg,keyscript=/lib/cryptsetup/scripts/decrypt_derived
- ${vm_lvm_lv}_swap_deciphered /dev/$vm_lvm_vg/${vm_lvm_lv}_swap ${vm_lvm_lv}_root_deciphered luks,lvm=$vm_lvm_vg,keyscript=/lib/cryptsetup/scripts/decrypt_derived
- EOF
+ m4 \
+ --define=VM_LVM_LV=$vm_lvm_lv \
+ --define=VM_LVM_VG=$vm_lvm_vg \
+ <"$tool"/etc/fstab.m4 |
+ sudo install -m 644 -o root -g root /dev/stdin \
+ /etc/fstab
+ m4 \
+ --define=VM_LVM_LV=$vm_lvm_lv \
+ --define=VM_LVM_VG=$vm_lvm_vg \
+ <"$tool"/etc/crypttab.m4 |
+ sudo install -m 644 -o root -g root /dev/stdin \
+ /etc/crypttab
rule tmpfs_configure
}
rule_initramfs_configure () {
$users
EOF
do eval local home\; home="~$user"
- cat "$home"/etc/ssh/authorized_keys
+ sudo cat "$home"/etc/ssh/authorized_keys
done
done |
- sudo install -m 644 -o root -g root /dev/stdin /etc/initramfs-tools/root/.ssh/authorized_keys
+ sudo install -m 644 -o root -g root /dev/stdin \
+ /etc/initramfs-tools/root/.ssh/authorized_keys
sudo rm -f \
/etc/initramfs-tools/root/.ssh/id_rsa.dropbear \
/etc/initramfs-tools/root/.ssh/id_rsa.pub \
# NOTE: clefs générées par Debian
sudo update-initramfs -u
}
+rule_insserv_remove () { # SYNTAX: $sv
+ local sv="$1"
+ #sudo chmod u+x /etc/init.d/"$sv"
+ sudo insserv --force --remove "$sv"
+ sudo test ! -x /etc/init.d/"$sv" ||
+ sudo /etc/init.d/"$sv" stop
+ sudo chmod ugo-x /etc/init.d/"$sv"
+ }
rule_gitolite_configure () {
- local user=git
sudo debconf-set-selections <<-EOF
- gitolite gitolite/gituser string $user
+ gitolite gitolite/gituser string git
gitolite gitolite/adminkey string
- gitolite gitolite/gitdir string /home/$user
+ gitolite gitolite/gitdir string /home/git
EOF
rule apt_get_install gitolite
- getent passwd "$user" >/dev/null ||
- sudo adduser \
+ rule adduser git \
--disabled-password \
--group \
+ --home /home/git \
--shell /bin/bash \
- --system \
- "$user"
- sudo chfn --full-name "$user" "$user"
- eval local home\; home="~$user"
- sudo install -d -m 770 -o "$user" -g "$user" \
+ --system
+ sudo chfn --full-name git git
+ rule adduser log-git \
+ --disabled-login \
+ --disabled-password \
+ --group \
+ --home /home/git/log \
+ --shell /bin/false \
+ --system
+ rule adduser git-data \
+ --disabled-login \
+ --disabled-password \
+ --group \
+ --home /home/git/pub \
+ --shell /bin/false \
+ --system
+ sudo adduser git git-data
+ sudo install -d -m 750 -o git -g git \
/etc/gitolite \
- "$home"/etc \
- "$home"/etc/ssh \
- "$home"/pub \
- "$home"/log \
- "$home"/log/gitolite \
- "$home"/log/gitolite/perf
- sudo ln -fns /etc/gitolite "$home"/etc/gitolite
- sudo ln -fns etc/gitolite/gitolite.rc "$home"/.gitolite.rc
- sudo ln -fns etc/ssh "$home"/.ssh
- sudo install -m 770 -o "$user" -g "$user" /dev/stdin \
- "$home"/etc/gitolite/gitolite.rc <<-EOF
+ /home/git/etc \
+ /home/git/etc/ssh
+ sudo install -d -m 751 -o git -g git \
+ /home/git
+ sudo install -d -m 2770 -o git-data -g git-data \
+ /home/git/pub
+ sudo install -d -m 1771 -o git -g git \
+ /home/git/log
+ sudo install -d -m 2770 -o git -g log-git \
+ /home/git/log/gitolite \
+ /home/git/log/gitolite/perf
+ sudo install -d -m 3771 -o git -g git \
+ /home/git/hooks
+ sudo ln -fns /etc/gitolite /home/git/etc/gitolite
+ sudo ln -fns /etc/gitweb /home/git/etc/gitweb
+ sudo ln -fns etc/gitolite/gitolite.rc /home/git/.gitolite.rc
+ sudo ln -fns etc/ssh /home/git/.ssh
+ sudo install -m 770 -o git -g git /dev/stdin \
+ /home/git/etc/gitolite/gitolite.rc <<-EOF
#\$ADMIN_POST_UPDATE_CHAINS_TO = "hooks/post-update.secondary";
#\$BIG_INFO_CAP = 20;
#\$ENV{GL_SLAVES} = 'gitolite@server2 gitolite@server3';
\$GL_CONF = "\$GL_ADMINDIR/conf/gitolite.conf";
\$GL_CONF_COMPILED = "\$GL_ADMINDIR/conf/gitolite.conf.pm";
#\$GL_GET_MEMBERSHIPS_PGM = "/usr/local/bin/expand-ldap-user-to-groups"
- \$GL_GITCONFIG_KEYS = "hooks\\..* repo\\..*";
+ \$GL_GITCONFIG_KEYS = "gitweb\\..* hooks\\..*";
#\$GL_HOSTNAME = "git.$vm_domainname";
# NOTE: read doc/mirroring.mkd COMPLETELY before setting this.
#\$GL_HTTP_ANON_USER = "mob";
#\$GL_WILDREPOS_DEFPERMS = 'R @all';
\$GL_WILDREPOS_PERM_CATS = "READERS WRITERS";
\$HTPASSWD_FILE = "";
- \$PROJECTS_LIST = \$ENV{HOME} . "/projects.list";
+ \$PROJECTS_LIST = \$ENV{HOME} . "/etc/gitweb/projects.list";
\$REPO_BASE = "pub";
\$REPO_UMASK = 0007;
\$RSYNC_BASE = "";
\$SVNSERVE = "";
#\$UPDATE_CHAINS_TO = "hooks/update.secondary";
- #\$WEB_INTERFACE = "gitweb";
+ \$WEB_INTERFACE = "gitweb";
1;
EOF
- sudo install -m 770 -o "$user" -g "$user" /dev/stdin \
- "$home"/etc/gitweb/gitweb.conf <<-EOF
- \$commit_oneline_message_width = 70;
- \$default_projects_order = 'age';
- \$default_text_plain_charset = 'UTF-8';
- @diff_opts = ();
- \$favicon = "img/git-favicon.png";
- \$git_temp = "/run/shm/gitweb";
- \$home_footer = "/etc/gitweb/cgi/home-footer.cgi.inc";
- \$home_header = "/etc/gitweb/cgi/home-header.cgi.inc";
- \$home_link = "/";
- \$home_link_str = 'dépôts';
- \$home_th_age = 'activité';
- \$home_th_descr = 'description';
- \$home_th_owner = 'contact';
- \$home_th_project = 'dépôt';
- \$javascript = "js/gitweb.js";
- \$logo = "img/git-logo.png";
- \$my_uri = "";
- \$projectroot = "../git";
- \$projects_list = "/etc/gitolite/projects.list";
- \$projects_list_description_width = 42;
- \$projects_list_owner_width = 15;
- \$search_str = "Filtre :";
- \$site_footer = "/home/fai/pub/www/git.autogeree.net/cgi/site-footer.bin";
- \$site_header = undef;
- \$site_name = "git.$vm_domainname";
- \$space_to_nbsp = 0;
- @stylesheets = ("css/gitweb.css");#
- \$untabify_tabstop = 2;
- EOF
- sudo install -m 600 -o "$user" -g "$user" \
- "$tool"/var/pub/ssh/"$user".key \
- "$home"/etc/ssh/"$user".pub
- sudo -u "$user" \
- GL_RC="$home"/etc/gitolite/gitolite.rc \
- GIT_AUTHOR_NAME="$user" \
- gl-setup -q "$home"/etc/ssh/"$user".pub "$user"
+ sudo install -m 600 -o git -g git \
+ "$tool"/var/pub/ssh/git.key \
+ /home/git/etc/ssh/git.pub
+ sudo -u git \
+ GL_RC=/home/git/etc/gitolite/gitolite.rc \
+ GIT_AUTHOR_NAME=git \
+ gl-setup -q /home/git/etc/ssh/git.pub git
local d
for d in doc logs src
- do test ! -d "$home"/etc/gitolite/"$d" ||
- rmdir "$home"/etc/gitolite/"$d"
+ do test ! -d /home/git/etc/gitolite/"$d" ||
+ rmdir /home/git/etc/gitolite/"$d"
done
- rule apt_get_install gitweb highlight
- #sudo sv restart spawn-fcgi.git.80.git.heureux-cyclage.org
- #sudo sv restart git-daemon.git.9418
}
rule_locales_configure () {
sudo debconf-set-selections <<-EOF
rule dpkg_reconfigure locales
}
rule_login_configure () {
- sudo install -m 644 -o root -g root /dev/stdin /etc/inittab <<-EOF
- # /etc/inittab: init(8) configuration.
-
- # The default runlevel.
- id:2:initdefault:
-
- # Boot-time system configuration/initialization script.
- # This is run first except when booting in emergency (-b) mode.
- si::sysinit:/etc/init.d/rcS
-
- # What to do in single-user mode.
- ~~:S:wait:/sbin/sulogin
-
- # /etc/init.d executes the S and K scripts upon change
- # of runlevel.
- #
- # Runlevel 0 is halt.
- # Runlevel 1 is single-user.
- # Runlevels 2-5 are multi-user.
- # Runlevel 6 is reboot.
-
- l0:0:wait:/etc/init.d/rc 0
- l1:1:wait:/etc/init.d/rc 1
- l2:2:wait:/etc/init.d/rc 2
- l3:3:wait:/etc/init.d/rc 3
- l4:4:wait:/etc/init.d/rc 4
- l5:5:wait:/etc/init.d/rc 5
- l6:6:wait:/etc/init.d/rc 6
- # Normally not reached, but fallthrough in case of emergency.
- z6:6:respawn:/sbin/sulogin
-
- # What to do when CTRL-ALT-DEL is pressed.
- ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
-
- # What to do when the power fails/returns.
- pf::powerwait:/etc/init.d/powerfail start
- pn::powerfailnow:/etc/init.d/powerfail now
- po::powerokwait:/etc/init.d/powerfail stop
-
- # Xen hypervisor console
- hvc:2345:respawn:/sbin/getty 38400 hvc0
- #xvc:2345:respawn:/sbin/getty 38400 xvc0
-
- #-- runit begin
- SV:123456:respawn:/usr/sbin/runsvdir-start
- #-- runit end
- EOF
- sudo install -m 644 -o root -g root /dev/stdin /etc/login.defs <<-EOF
- MAIL_DIR /var/mail
- FAILLOG_ENAB yes
- LOG_UNKFAIL_ENAB no
- LOG_OK_LOGINS no
- SYSLOG_SU_ENAB yes
- SYSLOG_SG_ENAB yes
- FTMP_FILE /var/log/btmp
- SU_NAME su
- HUSHLOGIN_FILE .hushlogin
- ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
- ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
- # NOTE: met les sbin/ dans ENV_PATH ;
- # - ça n'apporte aucune protection de ne pas les mettre ;
- # - ça frustre de ne pas les trouver.
- TTYGROUP tty
- TTYPERM 0600
- ERASECHAR 0177
- KILLCHAR 025
- UMASK 007
- # NOTE: rwxrwx--- ;
- # - donne une même confiance au groupe propriétaire qu'au propriétaire ;
- # - facilite l'utilisation des ACL, qui sont dépendantes des droits du groupe propriétaire.
- PASS_MAX_DAYS 99999
- PASS_MIN_DAYS 0
- PASS_WARN_AGE 7
- UID_MIN 1000
- UID_MAX 60000
- GID_MIN 1000
- GID_MAX 60000
- LOGIN_RETRIES 3
- LOGIN_TIMEOUT 60
- CHFN_RESTRICT rwh
- DEFAULT_HOME yes
- USERGROUPS_ENAB yes
- ENCRYPT_METHOD SHA512
- EOF
+ sudo install -m 644 -o root -g root \
+ "$tool"/etc/inittab \
+ /etc/inittab
+ sudo install -m 644 -o root -g root \
+ "$tool"/etc/login.defs \
+ /etc/login.defs
grep -q '^session optional pam_umask.so\>' /etc/pam.d/common-session ||
sudo install -m 644 -o root -g root /dev/stdin /etc/pam.d/common-session <<-EOF
$(cat /etc/pam.d/common-session)
xvc0
EOF
}
-rule_mail_configure () {
- rule postfix_configure
- rule postgrey_configure
- rule procmail_configure
- rule dovecot_configure
- }
-rule_mysql_configure () {
- rule apt_get_install mysql-server-5.5
- sudo service mysql restart
- }
rule_network_configure () {
sudo install -m 644 -o root -g root /dev/stdin /etc/hostname <<-EOF
$vm
$(cat /etc/hosts)
127.0.0.1 $vm_fqdn $vm
EOF
- sudo install -m 644 -o root -g root /dev/stdin /etc/network/interfaces <<-EOF
- auto lo
- iface lo inet loopback
-
- auto eth0=grenode
- iface grenode inet static
- address $vm_ipv4
- gateway $vm_ipv4 # NOTE: proxy_arp sur la passerelle permet d'utiliser la même adresse
- network $vm_ipv4
- broadcast $vm_ipv4
- netmask 255.255.255.255
- mtu 1300
- # NOTE: il y a besoin de ça en l'état actuel du réseau de Grenode
- # car la MTU des tunnels GRE/IPsec entre les routeurs de Grenode l'impose.
- #
- # root@ateliers:~# ping -M do -c 1 -s \$((1500-20-8-200)) soupirail.grenode.net
- # PING soupirail.grenode.net (91.216.110.1) 1272(1300) bytes of data.
- # 1280 bytes from soupirail.grenode.net (91.216.110.1): icmp_req=1 ttl=63 time=18.0 ms
- #
- # --- soupirail.grenode.net ping statistics ---
- # 1 packets transmitted, 1 received, 0% packet loss, time 0ms
- # rtt min/avg/max/mdev = 18.027/18.027/18.027/0.000 ms
- # root@ateliers:~# ping -M do -c 1 -s \$((1500-20-8-200+1)) soupirail.grenode.net
- # PING soupirail.grenode.net (91.216.110.1) 1273(1301) bytes of data.
- # From estran.grenode.net (91.216.110.6) icmp_seq=1 Frag needed and DF set (mtu = 1300)
- #
- # --- soupirail.grenode.net ping statistics ---
- # 0 packets transmitted, 0 received, +1 errors
- post-up ip address add $vm_ipv4/32 dev \$IFACE
- pre-down ip address delete $vm_ipv4/32 dev \$IFACE
+ sudo install -m 644 -o root -g root /dev/stdin /etc/resolv.conf <<-EOF
+ search ${vm_host#*.}
+ nameserver ${vm_host_nameserver}
EOF
+ m4 \
+ --define=VM_IPV4=$vm_ipv4 \
+ <"$tool"/etc/network/interfaces.m4 |
+ sudo install -m 640 -o root -g root /dev/stdin \
+ /etc/network/interfaces
}
-rule_www_configure () {
- getent passwd www >/dev/null ||
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --home /home/www \
- --shell /bin/false \
- --system \
- www
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --home ~www/log \
- --shell /bin/false \
- --system \
- log.www
- #sudo adduser www www-data
- sudo adduser www log.www
- #sudo adduser log log.www
- usermod --home /home/www/pub www-data
- sudo install -d -m 751 -o www -g www \
- /home/www
- sudo install -d -m 750 -o www -g www \
- /home/www/etc
- sudo install -d -m 1771 -o www-data -g www-data \
- /home/www/pub \
- sudo install -d -m 1771 -o log.www -g log.www \
- /home/www/log
+rule_runit_configure () { # SYNTAX: $sv [...] -- $configure_options
+ rule apt_get_install runit
+ if test $# = 0
+ then
+ set +x
+ sudo sv status \
+ $(sudo find /etc/sv \
+ -mindepth 1 -maxdepth 1 -type d \
+ -printf '%p\n' | sort)
+ else
+ local services=
+ while [ $# -gt 0 ]
+ do case $1 in
+ (--) shift; break;;
+ (*) services="$services $1"; shift;;
+ esac
+ done
+ #for sv in $(sudo find /etc/sv \
+ # -mindepth 1 -maxdepth 1 -type d \
+ # -false $(printf -- '-or -name %s\n' $services) \
+ # -printf '%f\n')
+ # do
+ # case $(sudo sv stop "$sv" | tee /dev/stderr) in
+ # (*": runsv not running") true;;
+ # (*": unable to open supervise/ok: file does not exist") true;;
+ # ("ok: down:"*) true;;
+ # (*) false;;
+ # esac
+ # done
+ for sv in $(find "$tool"/etc/sv \
+ -mindepth 1 -maxdepth 1 -type d \
+ -false $(printf -- '-or -name %s\n' $services) \
+ -printf '%f\n')
+ do
+ rule _runit_sv_configure "$sv" "$@"
+ rule _runit_sv_start "$sv"
+ done
+ #sleep 3
+ #sudo find -L /etc/service -type l -delete
+ fi
}
-rule_nginx_configure () {
- local -; set +f
- rule apt_get_install nginx
- rule www_configure
- sudo rm -rf \
- /etc/nginx/conf.d \
- /etc/nginx/site.d
- sudo install -d -m 770 -o www -g www \
- /etc/nginx \
- /etc/nginx/conf.d \
- /etc/nginx/site.d
+rule__runit_sv_configure () { # SYNTAX: $sv $configure_options
+ local sv="$1"; shift
+ sudo install -d -m 770 -o root -g root \
+ /etc/sv/"$sv"
+ sudo install -m 770 -o root -g root \
+ "$tool"/etc/sv/"$sv"/run \
+ /etc/sv/"$sv"/run
+ if test -e "$tool"/etc/sv/"$sv"/log/run
+ then
+ sudo install -d -m 770 -o root -g root \
+ /etc/sv/"$sv"/log
+ sudo install -m 770 -o root -g root \
+ "$tool"/etc/sv/"$sv"/log/run \
+ /etc/sv/"$sv"/log/run
+ fi
+ (
+ test ! -r "$tool"/etc/sv/"$sv"/configure.sh ||
+ . "$tool"/etc/sv/"$sv"/configure.sh || return 1
+ )
+ (
+ test ! -r "$tool"/etc/sv/"$sv"/log/configure.sh ||
+ . "$tool"/etc/sv/"$sv"/log/configure.sh || return 1
+ )
sudo ln -fns \
- /etc/nginx \
- /home/www/etc/nginx
- sudo install -m 660 -o www -g www \
- "$tool"/etc/nginx/nginx.conf \
- /etc/nginx/nginx.conf
- local conf
- for conf in "$tool"/etc/nginx/conf.d/*.conf
- do conf=${conf#"$tool"/etc/nginx/conf.d/}
- sudo install -m 660 -o www -g www \
- "$tool"/etc/nginx/conf.d/"$conf" \
- /etc/nginx/conf.d/"$conf"
+ ../sv/"$sv" \
+ /etc/service/"$sv"
+ }
+rule__runit_sv_restart () { # SYNTAX: $sv
+ local sv="$1"
+ while true
+ do case $(sudo sv restart "$sv" | tee /dev/stderr) in
+ (*": runsv not running") sleep 1;;
+ (*": unable to open supervise/ok: file does not exist") sleep 1;;
+ (*) break;;
+ esac
done
- for conf in "$tool"/etc/nginx/site.d/*/server.conf
- do conf=${conf#"$tool"/etc/nginx/site.d/}
- local port domain
- IFS=. read -r port domain <<-EOF
- ${conf%\/server\.conf}
- EOF
- assert 'test "${port:+set}"'
- assert 'test "${domain:+set}"'
- local site="$port.$domain"
- getent passwd www."$site" >/dev/null ||
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --home ~www-data/"$site" \
- --shell /bin/false \
- --system \
- www."$site"
- getent passwd log."$site" >/dev/null ||
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --shell /bin/false \
- --system \
- log."$site"
- sudo usermod --home ~www/log/"$site"/nginx log."$site"
- sudo install -d -m 770 -o www -g www \
- /etc/nginx/site.d/"$site"
- case $port in
- (443)
- local hint="run vm_remote nginx_key_send before"
- assert "sudo test -f /etc/nginx/\"$site\"/x509/key.pem" hint
- sudo install -m 664 -o www -g www \
- "$tool"/var/pub/x509/"$site"/crt+ca.pem \
- /etc/nginx/site.d/"$site"/x509/crt.pem
- ;;
+ }
+rule__runit_sv_start () { # SYNTAX: $sv
+ local sv="$1"
+ while true
+ do case $(sudo sv start "$sv" | tee /dev/stderr) in
+ (*": runsv not running") sleep 1;;
+ (*": unable to open supervise/ok: file does not exist") sleep 1;;
+ (*) break;;
esac
- case $port in
- (80)
- cat <<-EOF
- server {
- listen $port;
- access_log /home/www/log/$site/nginx/access.log main;
- error_log /home/www/log/$site/nginx/error.log warn;
- root /home/www/pub/$site;
- server_name $domain;
- $(cat "$tool"/etc/nginx/site.d/"$site"/server.conf)
- }
- EOF
- ;;
- (443)
- cat <<-EOF
- server {
- listen $port;
- access_log /home/www/log/$site/nginx/access.log main;
- error_log /home/www/log/$site/nginx/error.log warn;
- keepalive_timeout 70;
- root /home/www/pub/$site;
- server_name $domain;
- # DOC: http://wiki.nginx.org/HttpSslModule
- ssl on;
- ssl_certificate /home/www/etc/nginx/site.d/$site/x509/crt.pem;
- ssl_certificate_key /home/www/etc/nginx/site.d/$site/x509/key.pem;
- ssl_ciphers HIGH:!ADH:!MD5;
- ssl_prefer_server_ciphers on;
- ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
- ssl_session_cache shared:SSL:10m;
- $(cat "$tool"/etc/nginx/site.d/"$site"/server.conf)
- }
- EOF
- ;;
- esac |
- sudo install -m 660 -o www -g www /dev/stdin \
- /etc/nginx/site.d/"$site"/server.conf
- adduser www-data www."$site"
- test -e /home/www/pub/"$site" ||
- sudo install -d -m 3770 -o www."$site" -g www."$site" \
- /home/www/pub/"$site"
- sudo install -d -m 3770 -o log."$site" -g log."$site" \
- /home/www/log/"$site"/nginx
- test ! -r "$tool"/etc/nginx/site.d/"$site"/configure.sh ||
- . "$tool"/etc/nginx/site.d/"$site"/configure.sh
done
- rule apt_get_install spawn-fcgi fcgiwrap
- sudo insserv --remove fcgiwrap
- rule tmpfs_configure
- sudo service nginx restart
}
-rule_php5_fpm_configure () {
+rule_shorewall_configure () {
+ # DOC: http://shorewall.net/Introduction.html
local -; set +f
- rule apt_get_install \
- php5-fpm \
- php-apc
- getent passwd php5 >/dev/null ||
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --shell /bin/false \
- --system \
- php5
+ rule apt_get_install shorewall
+ sudo install -m 644 -o root -g root /dev/stdin \
+ /etc/default/shorewall <<-EOF
+ INITLOG=/dev/null
+ OPTIONS=""
+ RESTARTOPTIONS=""
+ SAFESTOP=0
+ STARTOPTIONS=""
+ startup=1
+ EOF
local conf
- sudo ln -fns \
- /etc/php5-fpm \
- /home/www/etc/php5
- sudo rm -f /etc/php5/fpm/pool.d/*
- for conf in "$tool"/etc/php5/fpm/pool.d/*.conf
- do conf=${conf#"$tool"/etc/php5/fpm/pool.d/}
- local port domain
- IFS=. read -r port domain <<-EOF
- ${conf%\.conf}
- EOF
- assert 'test "${port:+set}"'
- assert 'test "${domain:+set}"'
- local site="$port.$domain"
- getent passwd php5."$site" >/dev/null ||
- sudo adduser \
- --disabled-login \
- --disabled-password \
- --group \
- --no-create-home \
- --home ~www/pub/"$site" \
- --shell /bin/false \
- --system \
- php5."$site"
- sudo install -d -m 770 -o php5 -g php5 \
- /home/www/log/php5 \
- /home/www/log/php5/fpm
- sudo install -d -m 770 -o log."$site" -g log."$site" \
- /home/www/log/"$site"
- sudo adduser php5."$site" www."$site"
- sudo install -m 660 -o root -g root /dev/stdin \
- /etc/php5/fpm/pool.d/"$conf" <<-EOF
- [php5.$site]
- access.log = /home/www/log/$site/php5/fpm/access.log
- catch_workers_output = yes
- chdir = /
- env[HOSTNAME] = \$HOSTNAME
- env[TEMP] = /tmp
- env[TMPDIR] = /tmp
- env[TMP] = /tmp
- group = www-data
- listen = /run/nginx/fastcgi/php5.$site
- #listen = 127.0.0.1:9000
- #listen.allowed_clients = 127.0.0.1
- listen.backlog = -1
- pm = dynamic
- pm.max_children = 5
- pm.max_requests = 200
- pm.max_spare_servers = 4
- pm.min_spare_servers = 2
- pm.start_servers = 3
- pm.status_path = /status
- request_slowlog_timeout = 5s
- request_terminate_timeout = 120s
- rlimit_core = unlimited
- rlimit_files = 131072
- slowlog = /home/www/log/$site/php5/fpm/slow.log
- user = $php5_user
- $(cat "$tool"/etc/php5/fpm/pool.d/"$conf")
- EOF
- sudo install -m 664 -o root -g root \
- "$tool"/etc/php5/fpm/php.ini \
- /etc/php5/fpm/php.ini
+ for conf in "$tool"/etc/shorewall/*
+ do conf=${conf#"$tool"/etc/shorewall/}
+ sudo test ! -f "$tool"/etc/shorewall/"$conf" ||
+ sudo install -m 640 -o root -g root \
+ "$tool"/etc/shorewall/"$conf" \
+ /etc/shorewall/"$conf"
done
- rule tmpfs_configure
- sudo service php5-fpm restart
- }
-rule_postfix_configure () {
- local hint="run vm_remote postfix_key_send before"
- assert "test -f /etc/postfix/$vm_domainname/smtpd/x509/key.pem" hint
- #warn "lors de l'installation Debian, ne sélectionner aucune configuration pour postfix"
- sudo debconf-set-selections <<-EOF
- postfix postfix/main_mailer_type select No configuration
- EOF
- rule apt_get_install postfix
- sudo install -m 640 -o root -g root /dev/stdin /etc/postfix/.gitignore <<-EOF
- *.db
- EOF
- sudo install -d -m 771 -o root -g root \
- /etc/postfix/ \
- /etc/postfix/$vm_domainname/ \
- /etc/postfix/$vm_domainname/smtp \
- /etc/postfix/$vm_domainname/smtp/x509 \
- /etc/postfix/$vm_domainname/smtp/x509/ca \
- /etc/postfix/$vm_domainname/smtpd \
- /etc/postfix/$vm_domainname/smtpd/x509 \
- /etc/postfix/$vm_domainname/smtpd/x509/ca
- sudo ln -fns \
- ../crt+crl.self-signed.pem \
- /etc/postfix/$vm_domainname/smtpd/x509/ca/crt.pem
- sudo install -m 400 -o root -g root \
- "$tool"/var/pub/x509/smptd.$vm_domainname/crt+crl.self-signed.pem \
- /etc/postfix/$vm_domainname/smtpd/x509/crt+crl.self-signed.pem
- sudo install -m 400 -o root -g root \
- "$tool"/var/pub/x509/smptd.$vm_domainname/crt.pem \
- /etc/postfix/$vm_domainname/smtpd/x509/crt.pem
- sudo install -m 400 -o root -g root \
- "$tool"/var/pub/x509/smptd.$vm_domainname/crt+ca.pem \
- /etc/postfix/$vm_domainname/smtpd/x509/crt+ca.pem
- sudo install -m 400 -o root -g root \
- "$tool"/var/pub/x509/smptd.$vm_domainname/crt+crl.self-signed.pem \
- /etc/postfix/$vm_domainname/smtpd/x509/crt+crl.self-signed.pem
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/header_checks \
- /etc/postfix/$vm_domainname/header_checks
- sudo install -m 664 -o root -g root /dev/stdin \
- /etc/postfix/aliases <<-EOF
- # See man 5 aliases for format
- abuse: root
- admin: root
- contact: root
- postmaster: root
- root: $(getent group sudo | cut -f 4 -d : | tr , ' ')
- EOF
- sudo newaliases -oA/etc/postfix/aliases
- cat /dev/stdin "$tool"/etc/postfix/main.cf <<-EOF |
- mydomain = $vm_domainname
- myorigin = \$mydomain
- myhostname = $vm_hostname.\$mydomain
- mail_name = \$myhostname
- mydestination = $vm_hostname \$myhostname \$myorigin
- EOF
- sudo install -m 664 -o root -g root /dev/stdin \
- /etc/postfix/main.cf
- sudo install -m 664 -o root -g root \
- "$tool"/etc/postfix/master.cf \
- /etc/postfix/master.cf
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/smtp/x509/policy \
- /etc/postfix/$vm_domainname/smtp/x509/policy
- sudo postmap hash:/etc/postfix/$vm_domainname/smtp/x509/policy
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/smtp/header_checks \
- /etc/postfix/$vm_domainname/smtp/header_checks
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/smtpd/sender_access \
- /etc/postfix/$vm_domainname/smtpd/sender_access
- sudo postmap hash:/etc/postfix/$vm_domainname/smtpd/sender_access
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/smtpd/client_blacklist \
- /etc/postfix/$vm_domainname/smtpd/client_blacklist
- sudo postmap hash:/etc/postfix/$vm_domainname/smtpd/client_blacklist
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/smtpd/relay_clientcerts \
- /etc/postfix/$vm_domainname/smtpd/relay_clientcerts
- sudo postmap hash:/etc/postfix/$vm_domainname/smtpd/relay_clientcerts
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/transport \
- /etc/postfix/$vm_domainname/transport
- sudo postmap hash:/etc/postfix/$vm_domainname/transport
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postfix/$vm_domainname/virtual_alias \
- /etc/postfix/$vm_domainname/virtual_alias
- sudo postmap hash:/etc/postfix/$vm_domainname/virtual_alias
- sudo service postfix restart
- }
-rule_postgresql_configure () {
- rule apt_get_install postgresql-9.1
- if [ ! -d /var/lib/postgresql/9.1/ ]; then
- pg_createcluster -u postgres --start 9.1 main
- fi
- sudo install -m 660 -o root -g root \
- "$tool"/etc/postgresql/9.1/main/postgresql.conf \
- /etc/postgresql/9.1/main/postgresql.conf
- sudo service postgresql restart
- }
-rule_openerp_configure () {
- sudo install -m 660 -o root -g root /dev/stdin /etc/apt/sources.list.d/openerp.list <<-EOF
- deb http://nightly.openerp.com/trunk/nightly/deb/ ./
- EOF
- sudo apt-get update
- rule apt_get_install openerp
- }
-rule_postgrey_configure () {
- rule apt_get_install postgrey
- sudo service postgrey restart
- }
-rule_procmail_configure () {
- rule apt_get_install procmail
- sudo install -d -m 770 -o root -g root \
- /etc/skel/etc/mail \
- /etc/skel/var/cache/mail \
- /etc/skel/var/log/mail \
- /etc/skel/var/mail
- sudo install -m 660 -o root -g root \
- "$tool"/etc/skel/etc/mail/delivery.procmailrc \
- /etc/skel/etc/mail/delivery.procmailrc
- }
-rule_runit_configure () {
- rule apt_get_install runit
- local -; set +f
- rm -f /etc/service/*
- # NOTE: runsvdir éteindra les services qui n'apparaîtront plus ici.
- for sv in "$tool"/etc/sv/*
- do sv=${sv#"$tool"/etc/sv/}
- sudo install -d -m 770 -o root -g root \
- /etc/sv/"$sv"
- sudo install -m 770 -o root -g root \
- "$tool"/etc/sv/"$sv"/run \
- /etc/sv/"$sv"/run
- if test -e "$tool"/etc/sv/"$sv"/log/run
- then
- sudo install -d -m 770 -o root -g root \
- /etc/sv/"$sv"/log
- sudo install -m 770 -o root -g root \
- "$tool"/etc/sv/"$sv"/log/run \
- /etc/sv/"$sv"/log/run
- fi
- if test ! -x "$tool"/etc/sv/"$sv"/configure ||
- "$tool"/etc/sv/"$sv"/configure
- then
- ln -fns ../sv/"$sv" /etc/service/"$sv"
- sv restart "$sv"
- fi
+ sudo install -d -m 750 -o root -g root \
+ /etc/shorewall/macro.d
+ for conf in "$tool"/etc/shorewall/macro.d/*
+ do conf=${conf#"$tool"/etc/shorewall/macro.d/}
+ sudo test ! -f "$tool"/etc/shorewall/macro.d/"$conf" ||
+ sudo install -m 640 -o root -g root \
+ "$tool"/etc/shorewall/macro.d/"$conf" \
+ /etc/shorewall/macro.d/"$conf"
done
- }
-rule_ssh_configure () {
- ssh-keygen -F "$vm_fqdn" -f "$tool"/etc/openssh/known_hosts |
- ( while IFS= read -r line
- do case $line in (*" RSA") return 0; break;; esac
- done; return 1 ) ||
- sudo ssh-keygen -t rsa -b 4096 -N '' -f /etc/ssh/ssh_host_rsa_key
- sudo rm -f \
- /etc/ssh/ssh_host_dsa_key \
- /etc/ssh/ssh_host_dsa_key.pub \
- /etc/ssh/ssh_host_ecdsa_key \
- /etc/ssh/ssh_host_ecdsa_key.pub
- # NOTE: clefs générées par Debian
- sudo install -m 644 -o root -g root /dev/stdin /etc/ssh/sshd_config <<-EOF
- Port 22
- ListenAddress $vm_ipv4
- #ListenAddress ::
- Protocol 2
- Compression yes
- HostKey /etc/ssh/ssh_host_rsa_key
- UsePrivilegeSeparation yes
- KeyRegenerationInterval 3600
- ServerKeyBits 768
- SyslogFacility AUTH
- LogLevel INFO
- LoginGraceTime 120
- PermitRootLogin yes
- StrictModes yes
- RSAAuthentication yes
- PubkeyAuthentication yes
- AuthorizedKeysFile %h/etc/ssh/authorized_keys
- IgnoreRhosts yes
- RhostsRSAAuthentication no
- HostbasedAuthentication no
- IgnoreUserKnownHosts no
- PermitEmptyPasswords no
- ChallengeResponseAuthentication no
- PasswordAuthentication no
- KerberosAuthentication no
- GSSAPIAuthentication no
- X11Forwarding no
- X11DisplayOffset 10
- PrintMotd no
- DebianBanner no
- PrintLastLog yes
- TCPKeepAlive yes
- ClientAliveInterval 0
- AcceptEnv LANG LC_*
- Subsystem sftp /usr/lib/openssh/sftp-server
- UsePAM yes
- EOF
- sudo service ssh restart
+ sudo install -d -m 750 -o root -g root \
+ /etc/shorewall/action.d
+ #for conf in "$tool"/etc/shorewall/action.d/*
+ # do conf=${conf#"$tool"/etc/shorewall/action.d/}
+ # sudo test ! -f "$tool"/etc/shorewall/action.d/"$conf" ||
+ # sudo install -m 640 -o root -g root \
+ # "$tool"/etc/shorewall/action.d/"$conf" \
+ # /etc/shorewall/action.d/"$conf"
+ # done
+ #sudo shorewall safe-restart
}
rule_sysctl_configure () {
local -; set +f
"$tool"/etc/sysctl.d/"$conf" \
/etc/sysctl.d/"$conf"
done
+ sudo install -m 660 -o root -g root /dev/stdin \
+ /etc/sysctl.d/local-kernel-name.conf <<-EOF
+ kernel.hostname = $vm_hostname
+ kernel.domainname = $vm_domainname
+ EOF
sudo sysctl --system
}
rule_tmpfs_configure () {
TMP_SIZE=200m
TMPFS_SIZE=20%VM
EOF
- sudo install -m 775 -o root -g root \
- "$tool"/etc/init.d/tmpfs \
- /etc/init.d/tmpfs
- sudo update-rc.d tmpfs defaults
- }
-rule_time_configure () {
- sudo install -m 644 -o root -g root /dev/stdin /etc/timezone <<-EOF
- Europe/Paris
- EOF
- sudo debconf-set-selections <<-EOF
- tzdata tzdata/Areas select Europe
- tzdata tzdata/Zones/Europe select Paris
- EOF
- rule dpkg_reconfigure tzdata
- rule apt_get_install ntp
}
rule_user_add () { # SYNTAX: $user
- rule user_configure
- local user=$1
- getent passwd "$user" >/dev/null ||
- sudo adduser --disabled-password "$user"
+ local user="$1"; shift
+ rule adduser "$user" --disabled-password "$@"
# NOTE: le mot-de-passe doit être initialisé par l'utilisateur à l'aide de passwd-init .
eval local home\; home="~$user"
sudo adduser "$user" users
- sudo install -m 640 -o root -g root \
+ sudo install -m 640 -o "$user" -g "$user" \
"$tool"/var/pub/ssh/"$user".key \
"$home"/etc/ssh/authorized_keys
- local key; local -; set +f
- for key in "$tool"/var/pub/openpgp/*.key
- do sudo -u "$user" gpg --import - <"$key"
- done
- }
-rule_user_configure () {
- sudo install -m 660 -o root -g root /dev/stdin \
- /etc/adduser.conf <<-EOF
- ADD_EXTRA_GROUPS=1
- DHOME=/home
- DIR_MODE=0750
- DSHELL=/bin/bash
- EXTRA_GROUPS="users"
- FIRST_GID=1000
- FIRST_SYSTEM_GID=100
- FIRST_SYSTEM_UID=100
- FIRST_UID=1000
- GROUPHOMES=no
- LAST_GID=29999
- LAST_SYSTEM_GID=999
- LAST_SYSTEM_UID=999
- LAST_UID=29999
- LETTERHOMES=no
- NAME_REGEX="^[a-z][-a-z0-9_.]*\$"
- QUOTAUSER="" # TODO: init
- SETGID_HOME=no
- SKEL=/etc/skel
- SKEL_IGNORE_REGEX="dpkg-(old|new|dist|save)"
- USERGROUPS=yes
- USERS_GID=100
- EOF
- }
-rule_user_admin_add () { # SYNTAX: $user
- rule user_configure
- local user=$1
- getent passwd "$user" >/dev/null ||
- sudo adduser --disabled-password "$user"
- eval local home\; home="~$user"
- sudo adduser "$user" sudo
- sudo install -m 640 -o root -g root \
- "$tool"/var/pub/ssh/"$user".key \
- "$home"/etc/ssh/authorized_keys
- local key; local -; set +f
- for key in "$tool"/var/pub/openpgp/*.key
- do sudo -u "$user" gpg --import - <"$key"
- done
- rule user_admin_configure
- }
-rule_user_admin_configure () {
- rule initramfs_configure
- rule user_root_configure
+ gpg \
+ --homedir "$tool"/var/pub/openpgp/ \
+ --no-default-keyring \
+ --secret-keyring /dev/null \
+ --export |
+ sudo -u "$user" gpg --import -
}
rule_user_configure () {
+ rule apt_get_install bash-completion
+ sudo install -m 660 -o root -g root \
+ "$tool"/etc/adduser.conf \
+ /etc/adduser.conf
sudo install -d -m 750 -o root -g root \
/etc/skel \
/etc/skel/etc \
("\$SUDO_USER L "*) /usr/bin/passwd \$SUDO_USER;; esac
EOF
sudo install -m 640 -o root -g root /dev/stdin /etc/sudoers.d/etckeeper-unclean <<-EOF
- %sudo ALL=(ALL) NOPASSWD: /usr/sbin/etckeeper unclean
+ %sudo ALL=(ALL) NOPASSWD: /usr/bin/etckeeper unclean
EOF
sudo install -m 640 -o root -g root /dev/stdin /etc/sudoers.d/env_keep <<-EOF
Defaults env_keep = " \\
sudo install -m 644 -o root -g root \
"$tool"/etc/bash.bashrc \
/etc/bash.bashrc
+ sudo install -m 644 -o root -g root \
+ "$tool"/etc/inputrc \
+ /etc/inputrc
sudo install -m 644 -o root -g root \
"$tool"/etc/screenrc \
/etc/screenrc
+ local sh; local -; set +f
+ for sh in "$tool"/etc/user.d/*/configure.sh
+ do sh=${sh#"$tool"/etc/user.d/}
+ local user="${sh%/configure.sh}"
+ (
+ . "$tool"/etc/user.d/"$sh" || return 1
+ )
+ done
+ }
+rule_user_admin_add () { # SYNTAX: $user
+ rule user_configure
+ local user=$1
+ rule adduser "$user" --disabled-password
+ eval local home\; home="~$user"
+ sudo adduser "$user" sudo
+ sudo install -m 640 -o root -g root \
+ "$tool"/var/pub/ssh/"$user".key \
+ "$home"/etc/ssh/authorized_keys
+ gpg \
+ --homedir "$tool"/var/pub/openpgp/ \
+ --no-default-keyring \
+ --secret-keyring /dev/null \
+ --export |
+ sudo -u "$user" gpg --import -
+ rule user_admin_configure
+ }
+rule_user_admin_configure () {
+ rule initramfs_configure
+ rule user_root_configure
}
rule_user_root_configure () {
sudo install -d -m 750 -o root -g root \
$users
EOF
do eval local home\; home="~$user"
- cat "$home"/etc/ssh/authorized_keys
+ sudo cat "$home"/etc/ssh/authorized_keys
done
done |
- sudo install -m 640 -o root -g root /dev/stdin /root/etc/ssh/authorized_keys
- local key; local -; set +f
- for key in "$tool"/var/pub/openpgp/*.key
- do sudo gpg --import "$key"
- done
+ sudo install -m 640 -o root -g root /dev/stdin \
+ /root/etc/ssh/authorized_keys
+ gpg \
+ --homedir "$tool"/var/pub/openpgp/ \
+ --no-default-keyring \
+ --secret-keyring /dev/null \
+ --export |
+ sudo gpg --import -
+ }
+rule__www_configure () {
+ rule adduser www \
+ --disabled-login \
+ --disabled-password \
+ --group \
+ --home /home/www \
+ --shell /bin/false \
+ --system
+ rule adduser log-www \
+ --disabled-login \
+ --disabled-password \
+ --group \
+ --home /home/www/log \
+ --shell /bin/false \
+ --system
+ #sudo adduser www www-data
+ sudo adduser www log-www
+ #sudo adduser log log-www
+ usermod --home /home/www/pub www-data
+ sudo install -d -m 751 -o www -g www \
+ /home/www
+ sudo install -d -m 750 -o www -g www \
+ /home/www/etc
+ sudo install -d -m 1771 -o www-data -g www-data \
+ /home/www/pub
+ sudo install -d -m 1771 -o log-www -g log-www \
+ /home/www/log
}
rule_configure () {
rule apt_configure
rule boot_configure
rule sysctl_configure
rule user_configure
- rule mail_configure
- #rule apache2_configure
- rule nginx_configure
- rule php5_fpm_configure
rule gitolite_configure
+ rule shorewall_configure
rule runit_configure
}
(help);;
(*)
assert 'test "$(hostname --fqdn)" = "$vm_fqdn"' vm_fqdn
+ cd /
;;
esac
rule $rule "$@"
dépôts / lhc / ateliers.git / blobdiff