7 * To customize your installation, edit "LocalSettings.php". If you make
8 * changes here, they will be lost on next upgrade of MediaWiki!
10 * Note that since all these string interpolations are expanded
11 * before LocalSettings is included, if you localize something
12 * like $wgScriptPath, you must also localize everything that
15 * Documentation is in the source and on:
16 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 # This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
21 if( !defined( 'MEDIAWIKI' ) ) {
22 echo "This file is part of MediaWiki and is not a valid entry point\n";
27 * Create a site configuration object
28 * Not used for much in a default install
30 if ( !defined( 'MW_PHP4' ) ) {
31 require_once( "$IP/includes/SiteConfiguration.php" );
32 $wgConf = new SiteConfiguration
;
35 /** MediaWiki version number */
36 $wgVersion = '1.16alpha';
38 /** Name of the site. It must be changed in LocalSettings.php */
39 $wgSitename = 'MediaWiki';
42 * Name of the project namespace. If left set to false, $wgSitename will be
45 $wgMetaNamespace = false;
48 * Name of the project talk namespace.
50 * Normally you can ignore this and it will be something like
51 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
52 * manually for grammatical reasons. It is currently only respected by those
53 * languages where it might be relevant and where no automatic grammar converter
56 $wgMetaNamespaceTalk = false;
59 /** URL of the server. It will be automatically built including https mode */
62 if( isset( $_SERVER['SERVER_NAME'] ) ) {
63 $wgServerName = $_SERVER['SERVER_NAME'];
64 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
65 $wgServerName = $_SERVER['HOSTNAME'];
66 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
67 $wgServerName = $_SERVER['HTTP_HOST'];
68 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
69 $wgServerName = $_SERVER['SERVER_ADDR'];
71 $wgServerName = 'localhost';
74 # check if server use https:
75 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
77 $wgServer = $wgProto.'://' . $wgServerName;
78 # If the port is a non-standard one, add it to the URL
79 if( isset( $_SERVER['SERVER_PORT'] )
80 && !strpos( $wgServerName, ':' )
81 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
82 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
84 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
122 * Script users will request to get articles
123 * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
124 * LocalSettings.php is correctly set!
126 * Will be set based on $wgScriptPath in Setup.php if not overridden in
127 * LocalSettings.php. Generally you should not need to change this unless you
128 * don't like seeing "index.php".
130 $wgScriptExtension = '.php'; ///< extension to append to script names by default
131 $wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
132 $wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
139 * If you do override them, be sure to set them all!
141 * These will relatively rarely need to be set manually, unless you are
142 * splitting style sheets or images outside the main document root.
145 * style path as seen by users
147 $wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
149 * filesystem stylesheets directory
151 $wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
152 $wgStyleSheetPath = &$wgStylePath;
153 $wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
154 $wgVariantArticlePath = false;
155 $wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
156 $wgUploadDirectory = false; ///< defaults to "{$IP}/images"
157 $wgHashedUploadDirectory = true;
158 $wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
159 $wgFavicon = '/favicon.ico';
160 $wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
161 $wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
162 $wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
163 $wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
164 $wgUploadBaseUrl = "";
168 * Directory for caching data in the local filesystem. Should not be accessible
169 * from the web. Set this to false to not use any local caches.
171 * Note: if multiple wikis share the same localisation cache directory, they
172 * must all have the same set of extensions. You can set a directory just for
173 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
175 $wgCacheDirectory = false;
178 * Default value for chmoding of new directories.
180 $wgDirectoryMode = 0777;
183 * New file storage paths; currently used only for deleted files.
186 * $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
189 $wgFileStore = array();
190 $wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
191 $wgFileStore['deleted']['url'] = null; ///< Private
192 $wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
195 * File repository structures
197 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepo is
198 * an array of such structures. Each repository structure is an associative
199 * array of properties configuring the repository.
201 * Properties required for all repos:
202 * class The class name for the repository. May come from the core or an extension.
203 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
205 * name A unique name for the repository.
207 * For all core repos:
208 * url Base public URL
209 * hashLevels The number of directory levels for hash-based division of files
210 * thumbScriptUrl The URL for thumb.php (optional, not recommended)
211 * transformVia404 Whether to skip media file transformation on parse and rely on a 404
213 * initialCapital Equivalent to $wgCapitalLinks, determines whether filenames implicitly
214 * start with a capital letter. The current implementation may give incorrect
215 * description page links when the local $wgCapitalLinks and initialCapital
217 * pathDisclosureProtection
218 * May be 'paranoid' to remove all parameters from error messages, 'none' to
219 * leave the paths in unchanged, or 'simple' to replace paths with
220 * placeholders. Default for LocalRepo is 'simple'.
221 * fileMode This allows wikis to set the file mode when uploading/moving files. Default
224 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
225 * for local repositories:
226 * descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
227 * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
228 * http://en.wikipedia.org/w
230 * articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
231 * fetchDescription Fetch the text of the remote file description page. Equivalent to
232 * $wgFetchCommonsDescriptions.
235 * dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
236 * equivalent to the corresponding member of $wgDBservers
237 * tablePrefix Table prefix, the foreign wiki's $wgDBprefix
238 * hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
241 * apibase Use for the foreign API's URL
242 * apiThumbCacheExpiry How long to locally cache thumbs for
244 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
245 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
247 $wgLocalFileRepo = false;
248 $wgForeignFileRepos = array();
252 * Allowed title characters -- regex character class
253 * Don't change this unless you know what you're doing
255 * Problematic punctuation:
256 * []{}|# Are needed for link syntax, never enable these
257 * <> Causes problems with HTML escaping, don't use
258 * % Enabled by default, minor problems with path to query rewrite rules, see below
259 * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
260 * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
262 * All three of these punctuation problems can be avoided by using an alias, instead of a
263 * rewrite rule of either variety.
265 * The problem with % is that when using a path to query rewrite rule, URLs are
266 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
267 * %253F, for example, becomes "?". Our code does not double-escape to compensate
268 * for this, indeed double escaping would break if the double-escaped title was
269 * passed in the query string rather than the path. This is a minor security issue
270 * because articles can be created such that they are hard to view or edit.
272 * In some rare cases you may wish to remove + for compatibility with old links.
274 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
275 * this breaks interlanguage links
277 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
281 * The external URL protocols
283 $wgUrlProtocols = array(
289 'telnet://', // Well if we're going to support the above.. -ævar
290 'nntp://', // @bug 3808 RFC 1738
297 /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
298 * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
302 /** Configuration for different virus scanners. This an associative array of associative arrays:
303 * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
304 * valid values for $wgAntivirus are the keys defined in this array.
306 * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
308 * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
309 * file to scan. If not present, the filename will be appended to the command. Note that this must be
310 * overwritten if the scanner is not in the system path; in that case, plase set
311 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
313 * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
314 * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
315 * the file if $wgAntivirusRequired is not set.
316 * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
317 * which is probably imune to virusses. This causes the file to pass.
318 * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
319 * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
320 * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
322 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
323 * output. The relevant part should be matched as group one (\1).
324 * If not defined or the pattern does not match, the full message is shown to the user.
326 $wgAntivirusSetup = array(
330 'command' => "clamscan --no-summary ",
333 "0" => AV_NO_VIRUS
, # no virus
334 "1" => AV_VIRUS_FOUND
, # virus found
335 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
336 "*" => AV_SCAN_FAILED
, # else scan failed
339 'messagepattern' => '/.*?:(.*)/sim',
344 'command' => "f-prot ",
347 "0" => AV_NO_VIRUS
, # no virus
348 "3" => AV_VIRUS_FOUND
, # virus found
349 "6" => AV_VIRUS_FOUND
, # virus found
350 "*" => AV_SCAN_FAILED
, # else scan failed
353 'messagepattern' => '/.*?Infection:(.*)$/m',
358 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
359 $wgAntivirusRequired= true;
361 /** Determines if the mime type of uploaded files should be checked */
362 $wgVerifyMimeType= true;
364 /** Sets the mime type definition file to use by MimeMagic.php. */
365 $wgMimeTypeFile= "includes/mime.types";
366 #$wgMimeTypeFile= "/etc/mime.types";
367 #$wgMimeTypeFile= NULL; #use built-in defaults only.
369 /** Sets the mime type info file to use by MimeMagic.php. */
370 $wgMimeInfoFile= "includes/mime.info";
371 #$wgMimeInfoFile= NULL; #use built-in defaults only.
373 /** Switch for loading the FileInfo extension by PECL at runtime.
374 * This should be used only if fileinfo is installed as a shared object
375 * or a dynamic libary
377 $wgLoadFileinfoExtension= false;
379 /** Sets an external mime detector program. The command must print only
380 * the mime type to standard output.
381 * The name of the file to process will be appended to the command given here.
382 * If not set or NULL, mime_content_type will be used if available.
384 $wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
385 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
387 /** Switch for trivial mime detection. Used by thumb.php to disable all fance
388 * things, because only a few types of images are needed and file extensions
391 $wgTrivialMimeDetection= false;
394 * Additional XML types we can allow via mime-detection.
395 * array = ( 'rootElement' => 'associatedMimeType' )
397 $wgXMLMimeTypes = array(
398 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
399 'svg' => 'image/svg+xml',
400 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
401 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
402 'html' => 'text/html', // application/xhtml+xml?
406 * To set 'pretty' URL paths for actions other than
407 * plain page views, add to this array. For instance:
408 * 'edit' => "$wgScriptPath/edit/$1"
410 * There must be an appropriate script or rewrite rule
411 * in place to handle these URLs.
413 $wgActionPaths = array();
416 * If you operate multiple wikis, you can define a shared upload path here.
417 * Uploads to this wiki will NOT be put there - they will be put into
418 * $wgUploadDirectory.
419 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
420 * no file of the given name is found in the local repository (for [[Image:..]],
421 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
424 * Note that these configuration settings can now be defined on a per-
425 * repository basis for an arbitrary number of file repositories, using the
426 * $wgForeignFileRepos variable.
428 $wgUseSharedUploads = false;
429 /** Full path on the web server where shared uploads can be found */
430 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
431 /** Fetch commons image description pages and display them on the local wiki? */
432 $wgFetchCommonsDescriptions = false;
433 /** Path on the file system where shared uploads can be found. */
434 $wgSharedUploadDirectory = "/var/www/wiki3/images";
435 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
436 $wgSharedUploadDBname = false;
437 /** Optional table prefix used in database. */
438 $wgSharedUploadDBprefix = '';
439 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
440 $wgCacheSharedUploads = true;
441 /** Allow for upload to be copied from an URL. Requires Special:Upload?source=web */
442 $wgAllowCopyUploads = false;
443 $wgCopyUploadTimeout = 30; // 30 seconds default timeout for upload-by-URL
446 * Max size for uploads, in bytes. Currently only works for uploads from URL
447 * via CURL (see $wgAllowCopyUploads). The only way to impose limits on
448 * normal uploads is currently to edit php.ini.
450 $wgMaxUploadSize = 1024*1024*100; # 100MB
453 * Point the upload navigation link to an external URL
454 * Useful if you want to use a shared repository by default
455 * without disabling local uploads (use $wgEnableUploads = false for that)
456 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
458 $wgUploadNavigationUrl = false;
461 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
462 * generating them on render and outputting a static URL. This is necessary if some of your
463 * apache servers don't have read/write access to the thumbnail path.
466 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
468 $wgThumbnailScriptPath = false;
469 $wgSharedThumbnailScriptPath = false;
472 * Set the following to false especially if you have a set of files that need to
473 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
476 $wgHashedSharedUploadDirectory = true;
479 * Base URL for a repository wiki. Leave this blank if uploads are just stored
480 * in a shared directory and not meant to be accessible through a separate wiki.
481 * Otherwise the image description pages on the local wiki will link to the
482 * image description page on this wiki.
484 * Please specify the namespace, as in the example below.
486 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
493 * Site admin email address
494 * Default to wikiadmin@SERVER_NAME
496 $wgEmergencyContact = 'wikiadmin@' . $wgServerName;
499 * Password reminder email address
500 * The address we should use as sender when a user is requesting his password
501 * Default to apache@SERVER_NAME
503 $wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
506 * dummy address which should be accepted during mail send action
507 * It might be necessay to adapt the address or to set it equal
508 * to the $wgEmergencyContact address
510 #$wgNoReplyAddress = $wgEmergencyContact;
511 $wgNoReplyAddress = 'reply@not.possible';
514 * Set to true to enable the e-mail basic features:
515 * Password reminders, etc. If sending e-mail on your
516 * server doesn't work, you might want to disable this.
518 $wgEnableEmail = true;
521 * Set to true to enable user-to-user e-mail.
522 * This can potentially be abused, as it's hard to track.
524 $wgEnableUserEmail = true;
527 * Set to true to put the sending user's email in a Reply-To header
528 * instead of From. ($wgEmergencyContact will be used as From.)
530 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
531 * which can cause problems with SPF validation and leak recipient addressses
532 * when bounces are sent to the sender.
534 $wgUserEmailUseReplyTo = false;
537 * Minimum time, in hours, which must elapse between password reminder
538 * emails for a given account. This is to prevent abuse by mail flooding.
540 $wgPasswordReminderResendTime = 24;
543 * The time, in seconds, when an emailed temporary password expires.
545 $wgNewPasswordExpiry = 3600 * 24 * 7;
549 * For using a direct (authenticated) SMTP server connection.
550 * Default to false or fill an array :
552 * "host" => 'SMTP domain',
553 * "IDHost" => 'domain for MessageID',
555 * "auth" => true/false,
556 * "username" => user,
557 * "password" => password
566 /** database host name or ip address */
567 $wgDBserver = 'localhost';
568 /** database port number (for PostgreSQL) */
570 /** name of the database */
571 $wgDBname = 'my_wiki';
573 $wgDBconnection = '';
574 /** Database username */
575 $wgDBuser = 'wikiuser';
576 /** Database user's password */
582 * Leave as null to select the default search engine for the
583 * selected database type (eg SearchMySQL), or set to a class
584 * name to override to a custom search engine.
586 $wgSearchType = null;
588 /** Table name prefix */
590 /** MySQL table options to use during installation or update */
591 $wgDBTableOptions = 'ENGINE=InnoDB';
593 /** Mediawiki schema */
594 $wgDBmwschema = 'mediawiki';
595 /** Tsearch2 schema */
596 $wgDBts2schema = 'public';
598 /** To override default SQLite data directory ($docroot/../data) */
599 $wgSQLiteDataDir = '';
601 /** Default directory mode for SQLite data directory on creation.
602 * Note that this is different from the default directory mode used
605 $wgSQLiteDataDirMode = 0700;
608 * Make all database connections secretly go to localhost. Fool the load balancer
609 * thinking there is an arbitrarily large cluster of servers to connect to.
610 * Useful for debugging.
612 $wgAllDBsAreLocalhost = false;
617 /** Live high performance sites should disable this - some checks acquire giant mysql locks */
618 $wgCheckDBSchema = true;
622 * Shared database for multiple wikis. Commonly used for storing a user table
623 * for single sign-on. The server for this database must be the same as for the
625 * For backwards compatibility the shared prefix is set to the same as the local
626 * prefix, and the user table is listed in the default list of shared tables.
628 * $wgSharedTables may be customized with a list of tables to share in the shared
629 * datbase. However it is advised to limit what tables you do share as many of
630 * MediaWiki's tables may have side effects if you try to share them.
634 $wgSharedPrefix = false; # Defaults to $wgDBprefix
635 $wgSharedTables = array( 'user' );
638 * Database load balancer
639 * This is a two-dimensional array, an array of server info structures
642 * dbname: Default database name
644 * password: DB password
645 * type: "mysql" or "postgres"
646 * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
647 * groupLoads: array of load ratios, the key is the query group name. A query may belong
648 * to several groups, the most specific group defined here is used.
651 * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
652 * DBO_DEBUG -- equivalent of $wgDebugDumpSql
653 * DBO_TRX -- wrap entire request in a transaction
654 * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
655 * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
657 * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
658 * max threads: (optional) Maximum number of running threads
660 * These and any other user-defined properties will be assigned to the mLBInfo member
661 * variable of the Database object.
663 * Leave at false to use the single-server variables above. If you set this
664 * variable, the single-server variables will generally be ignored (except
665 * perhaps in some command-line scripts).
667 * The first server listed in this array (with key 0) will be the master. The
668 * rest of the servers will be slaves. To prevent writes to your slaves due to
669 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
670 * slaves in my.cnf. You can set read_only mode at runtime using:
674 * Since the effect of writing to a slave is so damaging and difficult to clean
675 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
676 * our masters, and then set read_only=0 on masters at runtime.
678 $wgDBservers = false;
681 * Load balancer factory configuration
682 * To set up a multi-master wiki farm, set the class here to something that
683 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
684 * The class identified here is responsible for reading $wgDBservers,
685 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
687 * The LBFactory_Multi class is provided for this purpose, please see
688 * includes/db/LBFactory_Multi.php for configuration information.
690 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
692 /** How long to wait for a slave to catch up to the master */
693 $wgMasterWaitTimeout = 10;
695 /** File to log database errors to */
696 $wgDBerrorLog = false;
698 /** When to give an error message */
699 $wgDBClusterTimeout = 10;
702 * Scale load balancer polling time so that under overload conditions, the database server
703 * receives a SHOW STATUS query at an average interval of this many microseconds
705 $wgDBAvgStatusPoll = 2000;
707 /** Set to true if using InnoDB tables */
708 $wgDBtransactions = false;
709 /** Set to true for compatibility with extensions that might be checking.
710 * MySQL 3.23.x is no longer supported. */
714 * Set to true to engage MySQL 4.1/5.0 charset-related features;
715 * for now will just cause sending of 'SET NAMES=utf8' on connect.
717 * WARNING: THIS IS EXPERIMENTAL!
719 * May break if you're not using the table defs from mysql5/tables.sql.
720 * May break if you're upgrading an existing wiki if set differently.
721 * Broken symptoms likely to include incorrect behavior with page titles,
722 * usernames, comments etc containing non-ASCII characters.
723 * Might also cause failures on the object cache and other things.
725 * Even correct usage may cause failures with Unicode supplementary
726 * characters (those not in the Basic Multilingual Plane) unless MySQL
727 * has enhanced their Unicode support.
732 * Other wikis on this site, can be administered from a single developer
734 * Array numeric key => database name
736 $wgLocalDatabases = array();
739 * Object cache settings
740 * See Defines.php for types
742 $wgMainCacheType = CACHE_NONE
;
743 $wgMessageCacheType = CACHE_ANYTHING
;
744 $wgParserCacheType = CACHE_ANYTHING
;
747 $wgParserCacheExpireTime = 86400;
749 $wgSessionsInMemcached = false;
751 /** This is used for setting php's session.save_handler. In practice, you will
752 * almost never need to change this ever. Other options might be 'user' or
753 * 'session_mysql.' Setting to null skips setting this entirely (which might be
754 * useful if you're doing cross-application sessions, see bug 11381) */
755 $wgSessionHandler = 'files';
758 * Memcached-specific settings
759 * See docs/memcached.txt
761 $wgUseMemCached = false;
762 $wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
763 $wgMemCachedServers = array( '127.0.0.1:11000' );
764 $wgMemCachedPersistent = false;
768 * Set this to true to make a local copy of the message cache, for use in
769 * addition to memcached. The files will be put in $wgCacheDirectory.
771 $wgUseLocalMessageCache = false;
774 * Defines format of local cache
775 * true - Serialized object
776 * false - PHP source file (Warning - security risk)
778 $wgLocalMessageCacheSerialized = true;
781 * Localisation cache configuration. Associative array with keys:
782 * class: The class to use. May be overridden by extensions.
784 * store: The location to store cache data. May be 'files', 'db' or
785 * 'detect'. If set to "files", data will be in CDB files. If set
786 * to "db", data will be stored to the database. If set to
787 * "detect", files will be used if $wgCacheDirectory is set,
788 * otherwise the database will be used.
790 * storeClass: The class name for the underlying storage. If set to a class
791 * name, it overrides the "store" setting.
793 * storeDirectory: If the store class puts its data in files, this is the
794 * directory it will use. If this is false, $wgCacheDirectory
797 * manualRecache: Set this to true to disable cache updates on web requests.
798 * Use maintenance/rebuildLocalisationCache.php instead.
800 $wgLocalisationCacheConf = array(
801 'class' => 'LocalisationCache',
803 'storeClass' => false,
804 'storeDirectory' => false,
805 'manualRecache' => false,
811 /** Site language code, should be one of ./languages/Language(.*).php */
812 $wgLanguageCode = 'en';
815 * Some languages need different word forms, usually for different cases.
816 * Used in Language::convertGrammar().
818 $wgGrammarForms = array();
819 #$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
821 /** Treat language links as magic connectors, not inline links */
822 $wgInterwikiMagic = true;
824 /** Hide interlanguage links from the sidebar */
825 $wgHideInterlanguageLinks = false;
827 /** List of language names or overrides for default names in Names.php */
828 $wgExtraLanguageNames = array();
830 /** We speak UTF-8 all the time now, unless some oddities happen */
831 $wgInputEncoding = 'UTF-8';
832 $wgOutputEncoding = 'UTF-8';
833 $wgEditEncoding = '';
836 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
837 * For Unix-like operating systems, set this to to a locale that has a UTF-8
838 * character set. Only the character set is relevant.
840 $wgShellLocale = 'en_US.utf8';
843 * Set this to eg 'ISO-8859-1' to perform character set
844 * conversion when loading old revisions not marked with
845 * "utf-8" flag. Use this when converting wiki to UTF-8
846 * without the burdensome mass conversion of old text data.
848 * NOTE! This DOES NOT touch any fields other than old_text.
849 * Titles, comments, user names, etc still must be converted
850 * en masse in the database before continuing as a UTF-8 wiki.
852 $wgLegacyEncoding = false;
855 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
856 * create stub reference rows in the text table instead of copying
857 * the full text of all current entries from 'cur' to 'text'.
859 * This will speed up the conversion step for large sites, but
860 * requires that the cur table be kept around for those revisions
861 * to remain viewable.
863 * maintenance/migrateCurStubs.php can be used to complete the
864 * migration in the background once the wiki is back online.
866 * This option affects the updaters *only*. Any present cur stub
867 * revisions will be readable at runtime regardless of this setting.
869 $wgLegacySchemaConversion = false;
871 $wgMimeType = 'text/html';
872 $wgJsMimeType = 'text/javascript';
873 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
874 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
875 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
878 * Should we output an HTML 5 doctype? This mode is still experimental, but
879 * all indications are that it should be usable, so it's enabled by default.
880 * If all goes well, it will be removed and become always true before the 1.16
886 * Permit other namespaces in addition to the w3.org default.
887 * Use the prefix for the key and the namespace for the value. For
889 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
890 * Normally we wouldn't have to define this in the root <html>
891 * element, but IE needs it there in some circumstances.
893 $wgXhtmlNamespaces = array();
895 /** Enable to allow rewriting dates in page text.
896 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
897 $wgUseDynamicDates = false;
898 /** Enable dates like 'May 12' instead of '12 May', this only takes effect if
899 * the interface is set to English
901 $wgAmericanDates = false;
903 * For Hindi and Arabic use local numerals instead of Western style (0-9)
904 * numerals in interface.
906 $wgTranslateNumerals = true;
909 * Translation using MediaWiki: namespace.
910 * Interface messages will be loaded from the database.
912 $wgUseDatabaseMessages = true;
915 * Expiry time for the message cache key
917 $wgMsgCacheExpiry = 86400;
920 * Maximum entry size in the message cache, in bytes
922 $wgMaxMsgCacheEntrySize = 10000;
924 /** Whether to enable language variant conversion. */
925 $wgDisableLangConversion = false;
927 /** Whether to enable language variant conversion for links. */
928 $wgDisableTitleConversion = false;
930 /** Default variant code, if false, the default will be the language code */
931 $wgDefaultLanguageVariant = false;
934 * Show a bar of language selection links in the user login and user
935 * registration forms; edit the "loginlanguagelinks" message to
938 $wgLoginLanguageSelector = false;
941 * Whether to use zhdaemon to perform Chinese text processing
942 * zhdaemon is under developement, so normally you don't want to
943 * use it unless for testing
945 $wgUseZhdaemon = false;
946 $wgZhdaemonHost="localhost";
947 $wgZhdaemonPort=2004;
950 # Miscellaneous configuration settings
953 $wgLocalInterwiki = 'w';
954 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
956 /** Interwiki caching settings.
957 $wgInterwikiCache specifies path to constant database file
958 This cdb database is generated by dumpInterwiki from maintenance
959 and has such key formats:
960 dbname:key - a simple key (e.g. enwiki:meta)
961 _sitename:key - site-scope key (e.g. wiktionary:meta)
962 __global:key - global-scope key (e.g. __global:meta)
963 __sites:dbname - site mapping (e.g. __sites:enwiki)
964 Sites mapping just specifies site name, other keys provide
965 "local url" data layout.
966 $wgInterwikiScopes specify number of domains to check for messages:
967 1 - Just wiki(db)-level
968 2 - wiki and global levels
970 $wgInterwikiFallbackSite - if unable to resolve from cache
972 $wgInterwikiCache = false;
973 $wgInterwikiScopes = 3;
974 $wgInterwikiFallbackSite = 'wiki';
977 * If local interwikis are set up which allow redirects,
978 * set this regexp to restrict URLs which will be displayed
979 * as 'redirected from' links.
981 * It might look something like this:
982 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
984 * Leave at false to avoid displaying any incoming redirect markers.
985 * This does not affect intra-wiki redirects, which don't change
988 $wgRedirectSources = false;
991 $wgShowIPinHeader = true; # For non-logged in users
992 $wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
993 $wgMaxArticleSize = 2048; # Maximum article size in kilobytes
994 # Maximum number of bytes in username. You want to run the maintenance
995 # script ./maintenancecheckUsernames.php once you have changed this value
996 $wgMaxNameChars = 255;
998 $wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
1001 * Maximum recursion depth for templates within templates.
1002 * The current parser adds two levels to the PHP call stack for each template,
1003 * and xdebug limits the call stack to 100 by default. So this should hopefully
1004 * stop the parser before it hits the xdebug limit.
1006 $wgMaxTemplateDepth = 40;
1007 $wgMaxPPExpandDepth = 40;
1010 * If true, removes (substitutes) templates in "~~~~" signatures.
1012 $wgCleanSignatures = true;
1014 $wgExtraSubtitle = '';
1015 $wgSiteSupportPage = ''; # A page where you users can receive donations
1018 * Set this to a string to put the wiki into read-only mode. The text will be
1019 * used as an explanation to users.
1021 * This prevents most write operations via the web interface. Cache updates may
1022 * still be possible. To prevent database writes completely, use the read_only
1028 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
1029 * Its contents will be shown to users as part of the read-only warning
1032 $wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
1035 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
1036 * The debug log file should be not be publicly accessible if it is used, as it
1037 * may contain private data.
1039 $wgDebugLogFile = '';
1042 * Prefix for debug log lines
1044 $wgDebugLogPrefix = '';
1047 * If true, instead of redirecting, show a page with a link to the redirect
1048 * destination. This allows for the inspection of PHP error messages, and easy
1049 * resubmission of form data. For developer use only.
1051 $wgDebugRedirects = false;
1054 * If true, log debugging data from action=raw.
1055 * This is normally false to avoid overlapping debug entries due to gen=css and
1058 $wgDebugRawPage = false;
1061 * Send debug data to an HTML comment in the output.
1063 * This may occasionally be useful when supporting a non-technical end-user. It's
1064 * more secure than exposing the debug log file to the web, since the output only
1065 * contains private data for the current user. But it's not ideal for development
1066 * use since data is lost on fatal errors and redirects.
1068 $wgDebugComments = false;
1070 /** Does nothing. Obsolete? */
1071 $wgLogQueries = false;
1074 * Write SQL queries to the debug log
1076 $wgDebugDumpSql = false;
1079 * Set to an array of log group keys to filenames.
1080 * If set, wfDebugLog() output for that group will go to that file instead
1081 * of the regular $wgDebugLogFile. Useful for enabling selective logging
1084 $wgDebugLogGroups = array();
1087 * Display debug data at the bottom of the main content area.
1089 * Useful for developers and technical users trying to working on a closed wiki.
1091 $wgShowDebug = false;
1094 * Show the contents of $wgHooks in Special:Version
1096 $wgSpecialVersionShowHooks = false;
1099 * Whether to show "we're sorry, but there has been a database error" pages.
1100 * Displaying errors aids in debugging, but may display information useful
1103 $wgShowSQLErrors = false;
1106 * If true, some error messages will be colorized when running scripts on the
1107 * command line; this can aid picking important things out when debugging.
1108 * Ignored when running on Windows or when output is redirected to a file.
1110 $wgColorErrors = true;
1113 * If set to true, uncaught exceptions will print a complete stack trace
1114 * to output. This should only be used for debugging, as it may reveal
1115 * private information in function parameters due to PHP's backtrace
1118 $wgShowExceptionDetails = false;
1121 * Expose backend server host names through the API and various HTML comments
1123 $wgShowHostnames = false;
1126 * If set to true MediaWiki will throw notices for some possible error
1127 * conditions and for deprecated functions.
1129 $wgDevelopmentWarnings = false;
1132 * Use experimental, DMOZ-like category browser
1134 $wgUseCategoryBrowser = false;
1137 * Keep parsed pages in a cache (objectcache table, turck, or memcached)
1138 * to speed up output of the same page viewed by another user with the
1141 * This can provide a significant speedup for medium to large pages,
1142 * so you probably want to keep it on. Extensions that conflict with the
1143 * parser cache should disable the cache on a per-page basis instead.
1145 $wgEnableParserCache = true;
1148 * Append a configured value to the parser cache and the sitenotice key so
1149 * that they can be kept separate for some class of activity.
1151 $wgRenderHashAppend = '';
1154 * If on, the sidebar navigation links are cached for users with the
1155 * current language set. This can save a touch of load on a busy site
1156 * by shaving off extra message lookups.
1158 * However it is also fragile: changing the site configuration, or
1159 * having a variable $wgArticlePath, can produce broken links that
1160 * don't update as expected.
1162 $wgEnableSidebarCache = false;
1165 * Expiry time for the sidebar cache, in seconds
1167 $wgSidebarCacheExpiry = 86400;
1170 * Under which condition should a page in the main namespace be counted
1171 * as a valid article? If $wgUseCommaCount is set to true, it will be
1172 * counted if it contains at least one comma. If it is set to false
1173 * (default), it will only be counted if it contains at least one [[wiki
1174 * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
1176 * Retroactively changing this variable will not affect
1177 * the existing count (cf. maintenance/recount.sql).
1179 $wgUseCommaCount = false;
1182 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
1183 * values are easier on the database. A value of 1 causes the counters to be
1184 * updated on every hit, any higher value n cause them to update *on average*
1185 * every n hits. Should be set to either 1 or something largish, eg 1000, for
1186 * maximum efficiency.
1188 $wgHitcounterUpdateFreq = 1;
1190 # Basic user rights and block settings
1191 $wgSysopUserBans = true; # Allow sysops to ban logged-in users
1192 $wgSysopRangeBans = true; # Allow sysops to ban IP ranges
1193 $wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
1194 $wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
1195 $wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
1197 # Pages anonymous user may see as an array, e.g.:
1198 # array ( "Main Page", "Wikipedia:Help");
1199 # Special:Userlogin and Special:Resetpass are always whitelisted.
1200 # NOTE: This will only work if $wgGroupPermissions['*']['read']
1201 # is false -- see below. Otherwise, ALL pages are accessible,
1202 # regardless of this setting.
1203 # Also note that this will only protect _pages in the wiki_.
1204 # Uploaded files will remain readable. Make your upload
1205 # directory name unguessable, or use .htaccess to protect it.
1206 $wgWhitelistRead = false;
1209 * Should editors be required to have a validated e-mail
1210 * address before being allowed to edit?
1212 $wgEmailConfirmToEdit=false;
1215 * Permission keys given to users in each group.
1216 * All users are implicitly in the '*' group including anonymous visitors;
1217 * logged-in users are all implicitly in the 'user' group. These will be
1218 * combined with the permissions of all groups that a given user is listed
1219 * in in the user_groups table.
1221 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
1222 * doing! This will wipe all permissions, and may mean that your users are
1223 * unable to perform certain essential tasks or access new functionality
1224 * when new permissions are introduced and default grants established.
1226 * Functionality to make pages inaccessible has not been extensively tested
1227 * for security. Use at your own risk!
1229 * This replaces wgWhitelistAccount and wgWhitelistEdit
1231 $wgGroupPermissions = array();
1233 // Implicit group for all visitors
1234 $wgGroupPermissions['*']['createaccount'] = true;
1235 $wgGroupPermissions['*']['read'] = true;
1236 $wgGroupPermissions['*']['edit'] = true;
1237 $wgGroupPermissions['*']['createpage'] = true;
1238 $wgGroupPermissions['*']['createtalk'] = true;
1239 $wgGroupPermissions['*']['writeapi'] = true;
1240 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
1242 // Implicit group for all logged-in accounts
1243 $wgGroupPermissions['user']['move'] = true;
1244 $wgGroupPermissions['user']['move-subpages'] = true;
1245 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
1246 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
1247 $wgGroupPermissions['user']['read'] = true;
1248 $wgGroupPermissions['user']['edit'] = true;
1249 $wgGroupPermissions['user']['createpage'] = true;
1250 $wgGroupPermissions['user']['createtalk'] = true;
1251 $wgGroupPermissions['user']['writeapi'] = true;
1252 $wgGroupPermissions['user']['upload'] = true;
1253 $wgGroupPermissions['user']['reupload'] = true;
1254 $wgGroupPermissions['user']['reupload-shared'] = true;
1255 $wgGroupPermissions['user']['minoredit'] = true;
1256 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
1258 // Implicit group for accounts that pass $wgAutoConfirmAge
1259 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
1261 // Users with bot privilege can have their edits hidden
1262 // from various log pages by default
1263 $wgGroupPermissions['bot']['bot'] = true;
1264 $wgGroupPermissions['bot']['autoconfirmed'] = true;
1265 $wgGroupPermissions['bot']['nominornewtalk'] = true;
1266 $wgGroupPermissions['bot']['autopatrol'] = true;
1267 $wgGroupPermissions['bot']['suppressredirect'] = true;
1268 $wgGroupPermissions['bot']['apihighlimits'] = true;
1269 $wgGroupPermissions['bot']['writeapi'] = true;
1270 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
1272 // Most extra permission abilities go to this group
1273 $wgGroupPermissions['sysop']['block'] = true;
1274 $wgGroupPermissions['sysop']['createaccount'] = true;
1275 $wgGroupPermissions['sysop']['delete'] = true;
1276 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
1277 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
1278 $wgGroupPermissions['sysop']['undelete'] = true;
1279 $wgGroupPermissions['sysop']['editinterface'] = true;
1280 $wgGroupPermissions['sysop']['editusercssjs'] = true;
1281 $wgGroupPermissions['sysop']['import'] = true;
1282 $wgGroupPermissions['sysop']['importupload'] = true;
1283 $wgGroupPermissions['sysop']['move'] = true;
1284 $wgGroupPermissions['sysop']['move-subpages'] = true;
1285 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
1286 $wgGroupPermissions['sysop']['patrol'] = true;
1287 $wgGroupPermissions['sysop']['autopatrol'] = true;
1288 $wgGroupPermissions['sysop']['protect'] = true;
1289 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
1290 $wgGroupPermissions['sysop']['rollback'] = true;
1291 $wgGroupPermissions['sysop']['trackback'] = true;
1292 $wgGroupPermissions['sysop']['upload'] = true;
1293 $wgGroupPermissions['sysop']['reupload'] = true;
1294 $wgGroupPermissions['sysop']['reupload-shared'] = true;
1295 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
1296 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
1297 $wgGroupPermissions['sysop']['upload_by_url'] = true;
1298 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
1299 $wgGroupPermissions['sysop']['blockemail'] = true;
1300 $wgGroupPermissions['sysop']['markbotedits'] = true;
1301 $wgGroupPermissions['sysop']['apihighlimits'] = true;
1302 $wgGroupPermissions['sysop']['browsearchive'] = true;
1303 $wgGroupPermissions['sysop']['noratelimit'] = true;
1304 $wgGroupPermissions['sysop']['movefile'] = true;
1305 #$wgGroupPermissions['sysop']['mergehistory'] = true;
1307 // Permission to change users' group assignments
1308 $wgGroupPermissions['bureaucrat']['userrights'] = true;
1309 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
1310 // Permission to change users' groups assignments across wikis
1311 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
1312 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
1313 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
1315 #$wgGroupPermissions['sysop']['deleterevision'] = true;
1316 // To hide usernames from users and Sysops
1317 #$wgGroupPermissions['suppress']['hideuser'] = true;
1318 // To hide revisions/log items from users and Sysops
1319 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
1320 // For private suppression log access
1321 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
1324 * The developer group is deprecated, but can be activated if need be
1325 * to use the 'lockdb' and 'unlockdb' special pages. Those require
1326 * that a lock file be defined and creatable/removable by the web
1329 # $wgGroupPermissions['developer']['siteadmin'] = true;
1332 * Permission keys revoked from users in each group.
1333 * This acts the same way as wgGroupPermissions above, except that
1334 * if the user is in a group here, the permission will be removed from them.
1336 * Improperly setting this could mean that your users will be unable to perform
1337 * certain essential tasks, so use at your own risk!
1339 $wgRevokePermissions = array();
1342 * Implicit groups, aren't shown on Special:Listusers or somewhere else
1344 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
1347 * A map of group names that the user is in, to group names that those users
1348 * are allowed to add or revoke.
1350 * Setting the list of groups to add or revoke to true is equivalent to "any group".
1352 * For example, to allow sysops to add themselves to the "bot" group:
1354 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
1356 * Implicit groups may be used for the source group, for instance:
1358 * $wgGroupsRemoveFromSelf = array( '*' => true );
1360 * This allows users in the '*' group (i.e. any user) to remove themselves from
1361 * any group that they happen to be in.
1364 $wgGroupsAddToSelf = array();
1365 $wgGroupsRemoveFromSelf = array();
1368 * Set of available actions that can be restricted via action=protect
1369 * You probably shouldn't change this.
1370 * Translated through restriction-* messages.
1372 $wgRestrictionTypes = array( 'edit', 'move' );
1375 * Rights which can be required for each protection level (via action=protect)
1377 * You can add a new protection level that requires a specific
1378 * permission by manipulating this array. The ordering of elements
1379 * dictates the order on the protection form's lists.
1381 * '' will be ignored (i.e. unprotected)
1382 * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
1384 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
1387 * Set the minimum permissions required to edit pages in each
1388 * namespace. If you list more than one permission, a user must
1389 * have all of them to edit pages in that namespace.
1391 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
1393 $wgNamespaceProtection = array();
1396 * Pages in namespaces in this array can not be used as templates.
1397 * Elements must be numeric namespace ids.
1398 * Among other things, this may be useful to enforce read-restrictions
1399 * which may otherwise be bypassed by using the template machanism.
1401 $wgNonincludableNamespaces = array();
1404 * Number of seconds an account is required to age before
1405 * it's given the implicit 'autoconfirm' group membership.
1406 * This can be used to limit privileges of new accounts.
1408 * Accounts created by earlier versions of the software
1409 * may not have a recorded creation date, and will always
1410 * be considered to pass the age test.
1412 * When left at 0, all registered accounts will pass.
1414 $wgAutoConfirmAge = 0;
1415 //$wgAutoConfirmAge = 600; // ten minutes
1416 //$wgAutoConfirmAge = 3600*24; // one day
1418 # Number of edits an account requires before it is autoconfirmed
1419 # Passing both this AND the time requirement is needed
1420 $wgAutoConfirmCount = 0;
1421 //$wgAutoConfirmCount = 50;
1424 * Automatically add a usergroup to any user who matches certain conditions.
1426 * array( '&' or '|' or '^', cond1, cond2, ... )
1427 * where cond1, cond2, ... are themselves conditions; *OR*
1428 * APCOND_EMAILCONFIRMED, *OR*
1429 * array( APCOND_EMAILCONFIRMED ), *OR*
1430 * array( APCOND_EDITCOUNT, number of edits ), *OR*
1431 * array( APCOND_AGE, seconds since registration ), *OR*
1432 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
1433 * array( APCOND_ISIP, ip ), *OR*
1434 * array( APCOND_IPINRANGE, range ), *OR*
1435 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
1436 * array( APCOND_BLOCKED ), *OR*
1437 * similar constructs defined by extensions.
1439 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
1440 * user who has provided an e-mail address.
1442 $wgAutopromote = array(
1443 'autoconfirmed' => array( '&',
1444 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
1445 array( APCOND_AGE
, &$wgAutoConfirmAge ),
1450 * These settings can be used to give finer control over who can assign which
1451 * groups at Special:Userrights. Example configuration:
1453 * // Bureaucrat can add any group
1454 * $wgAddGroups['bureaucrat'] = true;
1455 * // Bureaucrats can only remove bots and sysops
1456 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
1457 * // Sysops can make bots
1458 * $wgAddGroups['sysop'] = array( 'bot' );
1459 * // Sysops can disable other sysops in an emergency, and disable bots
1460 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
1462 $wgAddGroups = array();
1463 $wgRemoveGroups = array();
1466 * A list of available rights, in addition to the ones defined by the core.
1467 * For extensions only.
1469 $wgAvailableRights = array();
1472 * Optional to restrict deletion of pages with higher revision counts
1473 * to users with the 'bigdelete' permission. (Default given to sysops.)
1475 $wgDeleteRevisionsLimit = 0;
1478 * Used to figure out if a user is "active" or not. User::isActiveEditor()
1479 * sees if a user has made at least $wgActiveUserEditCount number of edits
1480 * within the last $wgActiveUserDays days.
1482 $wgActiveUserEditCount = 30;
1483 $wgActiveUserDays = 30;
1485 # Proxy scanner settings
1489 * If you enable this, every editor's IP address will be scanned for open HTTP
1492 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
1493 * ISP and ask for your server to be shut down.
1495 * You have been warned.
1497 $wgBlockOpenProxies = false;
1498 /** Port we want to scan for a proxy */
1499 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
1500 /** Script used to scan */
1501 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
1503 $wgProxyMemcExpiry = 86400;
1504 /** This should always be customised in LocalSettings.php */
1505 $wgSecretKey = false;
1506 /** big list of banned IP addresses, in the keys not the values */
1507 $wgProxyList = array();
1509 $wgProxyKey = false;
1511 /** Number of accounts each IP address may create, 0 to disable.
1512 * Requires memcached */
1513 $wgAccountCreationThrottle = 0;
1515 # Client-side caching:
1517 /** Allow client-side caching of pages */
1518 $wgCachePages = true;
1521 * Set this to current time to invalidate all prior cached pages. Affects both
1522 * client- and server-side caching.
1523 * You can get the current date on your server by using the command:
1524 * date +%Y%m%d%H%M%S
1526 $wgCacheEpoch = '20030516000000';
1529 * Bump this number when changing the global style sheets and JavaScript.
1530 * It should be appended in the query string of static CSS and JS includes,
1531 * to ensure that client-side caches do not keep obsolete copies of global
1534 $wgStyleVersion = '230';
1537 # Server-side caching:
1540 * This will cache static pages for non-logged-in users to reduce
1541 * database traffic on public sites.
1542 * Must set $wgShowIPinHeader = false
1544 $wgUseFileCache = false;
1546 /** Directory where the cached page will be saved */
1547 $wgFileCacheDirectory = false; ///< defaults to "$wgCacheDirectory/html";
1550 * When using the file cache, we can store the cached HTML gzipped to save disk
1551 * space. Pages will then also be served compressed to clients that support it.
1552 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1553 * the default LocalSettings.php! If you enable this, remove that setting first.
1555 * Requires zlib support enabled in PHP.
1559 /** Whether MediaWiki should send an ETag header */
1562 # Email notification settings
1565 /** For email notification on page changes */
1566 $wgPasswordSender = $wgEmergencyContact;
1568 # true: from page editor if s/he opted-in
1569 # false: Enotif mails appear to come from $wgEmergencyContact
1570 $wgEnotifFromEditor = false;
1572 // TODO move UPO to preferences probably ?
1573 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1574 # If set to false, the corresponding input form on the user preference page is suppressed
1575 # It call this to be a "user-preferences-option (UPO)"
1576 $wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
1577 $wgEnotifWatchlist = false; # UPO
1578 $wgEnotifUserTalk = false; # UPO
1579 $wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
1580 $wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
1581 # # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
1583 # Send a generic mail instead of a personalised mail for each user. This
1584 # always uses UTC as the time zone, and doesn't include the username.
1586 # For pages with many users watching, this can significantly reduce mail load.
1587 # Has no effect when using sendmail rather than SMTP;
1589 $wgEnotifImpersonal = false;
1591 # Maximum number of users to mail at once when using impersonal mail. Should
1592 # match the limit on your mail server.
1593 $wgEnotifMaxRecips = 500;
1595 # Send mails via the job queue.
1596 $wgEnotifUseJobQ = false;
1598 # Use real name instead of username in e-mail "from" field
1599 $wgEnotifUseRealName = false;
1602 * Array of usernames who will be sent a notification email for every change which occurs on a wiki
1604 $wgUsersNotifiedOnAllChanges = array();
1606 /** Show watching users in recent changes, watchlist and page history views */
1607 $wgRCShowWatchingUsers = false; # UPO
1608 /** Show watching users in Page views */
1609 $wgPageShowWatchingUsers = false;
1610 /** Show the amount of changed characters in recent changes */
1611 $wgRCShowChangedSize = true;
1614 * If the difference between the character counts of the text
1615 * before and after the edit is below that value, the value will be
1616 * highlighted on the RC page.
1618 $wgRCChangedSizeThreshold = 500;
1621 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
1622 * view for watched pages with new changes */
1623 $wgShowUpdatedMarker = true;
1626 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
1628 $wgCookieExpiration = 30*86400;
1630 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1631 * problems when the user requests two pages within a short period of time. This
1632 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1635 $wgClockSkewFudge = 5;
1637 # Squid-related settings
1640 /** Enable/disable Squid */
1641 $wgUseSquid = false;
1643 /** If you run Squid3 with ESI support, enable this (default:false): */
1646 /** Internal server name as known to Squid, if different */
1647 # $wgInternalServer = 'http://yourinternal.tld:8000';
1648 $wgInternalServer = $wgServer;
1651 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1652 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1653 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1656 $wgSquidMaxage = 18000;
1659 * Default maximum age for raw CSS/JS accesses
1661 $wgForcedRawSMaxage = 300;
1664 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1666 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1667 * headers sent/modified from these proxies when obtaining the remote IP address
1669 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1671 $wgSquidServers = array();
1674 * As above, except these servers aren't purged on page changes; use to set a
1675 * list of trusted proxies, etc.
1677 $wgSquidServersNoPurge = array();
1679 /** Maximum number of titles to purge in any one client operation */
1680 $wgMaxSquidPurgeTitles = 400;
1682 /** HTCP multicast purging */
1684 $wgHTCPMulticastTTL = 1;
1685 # $wgHTCPMulticastAddress = "224.0.0.85";
1686 $wgHTCPMulticastAddress = false;
1688 /** Should forwarded Private IPs be accepted? */
1689 $wgUsePrivateIPs = false;
1694 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
1695 * or ".any.subdomain.net"
1697 $wgCookieDomain = '';
1698 $wgCookiePath = '/';
1699 $wgCookieSecure = ($wgProto == 'https');
1700 $wgDisableCookieCheck = false;
1703 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
1704 * using the database name.
1706 $wgCookiePrefix = false;
1709 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
1710 * in browsers that support this feature. This can mitigates some classes of
1713 * Only supported on PHP 5.2 or higher.
1715 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
1718 * If the requesting browser matches a regex in this blacklist, we won't
1719 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
1721 $wgHttpOnlyBlacklist = array(
1722 // Internet Explorer for Mac; sometimes the cookies work, sometimes
1723 // they don't. It's difficult to predict, as combinations of path
1724 // and expiration options affect its parsing.
1725 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1728 /** A list of cookies that vary the cache (for use by extensions) */
1729 $wgCacheVaryCookies = array();
1731 /** Override to customise the session name */
1732 $wgSessionName = false;
1734 /** Whether to allow inline image pointing to other websites */
1735 $wgAllowExternalImages = false;
1737 /** If the above is false, you can specify an exception here. Image URLs
1738 * that start with this string are then rendered, while all others are not.
1739 * You can use this to set up a trusted, simple repository of images.
1740 * You may also specify an array of strings to allow multiple sites
1743 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
1744 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
1746 $wgAllowExternalImagesFrom = '';
1748 /** If $wgAllowExternalImages is false, you can allow an on-wiki
1749 * whitelist of regular expression fragments to match the image URL
1750 * against. If the image matches one of the regular expression fragments,
1751 * The image will be displayed.
1753 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
1754 * Or false to disable it
1756 $wgEnableImageWhitelist = true;
1758 /** Allows to move images and other media files */
1759 $wgAllowImageMoving = true;
1761 /** Disable database-intensive features */
1762 $wgMiserMode = false;
1763 /** Disable all query pages if miser mode is on, not just some */
1764 $wgDisableQueryPages = false;
1765 /** Number of rows to cache in 'querycache' table when miser mode is on */
1766 $wgQueryCacheLimit = 1000;
1767 /** Number of links to a page required before it is deemed "wanted" */
1768 $wgWantedPagesThreshold = 1;
1769 /** Enable slow parser functions */
1770 $wgAllowSlowParserFunctions = false;
1773 * Maps jobs to their handling classes; extensions
1774 * can add to this to provide custom jobs
1776 $wgJobClasses = array(
1777 'refreshLinks' => 'RefreshLinksJob',
1778 'refreshLinks2' => 'RefreshLinksJob2',
1779 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
1780 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
1781 'sendMail' => 'EmaillingJob',
1782 'enotifNotify' => 'EnotifNotifyJob',
1783 'fixDoubleRedirect' => 'DoubleRedirectJob',
1787 * Additional functions to be performed with updateSpecialPages.
1788 * Expensive Querypages are already updated.
1790 $wgSpecialPageCacheUpdates = array(
1791 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
1795 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
1796 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
1797 * (ImageMagick) installed and available in the PATH.
1798 * Please see math/README for more information.
1801 /** Location of the texvc binary */
1802 $wgTexvc = './math/texvc';
1805 # Profiling / debugging
1807 # You have to create a 'profiling' table in your database before using
1808 # profiling see maintenance/archives/patch-profiling.sql .
1810 # To enable profiling, edit StartProfiler.php
1812 /** Only record profiling info for pages that took longer than this */
1813 $wgProfileLimit = 0.0;
1814 /** Don't put non-profiling info into log file */
1815 $wgProfileOnly = false;
1816 /** Log sums from profiling into "profiling" table in db. */
1817 $wgProfileToDatabase = false;
1818 /** If true, print a raw call tree instead of per-function report */
1819 $wgProfileCallTree = false;
1820 /** Should application server host be put into profiling table */
1821 $wgProfilePerHost = false;
1823 /** Settings for UDP profiler */
1824 $wgUDPProfilerHost = '127.0.0.1';
1825 $wgUDPProfilerPort = '3811';
1827 /** Detects non-matching wfProfileIn/wfProfileOut calls */
1828 $wgDebugProfiling = false;
1829 /** Output debug message on every wfProfileIn/wfProfileOut */
1830 $wgDebugFunctionEntry = 0;
1831 /** Lots of debugging output from SquidUpdate.php */
1832 $wgDebugSquid = false;
1835 * Destination for wfIncrStats() data...
1836 * 'cache' to go into the system cache, if enabled (memcached)
1837 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
1840 $wgStatsMethod = 'cache';
1842 /** Whereas to count the number of time an article is viewed.
1843 * Does not work if pages are cached (for example with squid).
1845 $wgDisableCounters = false;
1847 $wgDisableTextSearch = false;
1848 $wgDisableSearchContext = false;
1852 * Set to true to have nicer highligted text in search results,
1853 * by default off due to execution overhead
1855 $wgAdvancedSearchHighlighting = false;
1858 * Regexp to match word boundaries, defaults for non-CJK languages
1859 * should be empty for CJK since the words are not separate
1861 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
1862 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
1865 * Template for OpenSearch suggestions, defaults to API action=opensearch
1867 * Sites with heavy load would tipically have these point to a custom
1868 * PHP wrapper to avoid firing up mediawiki for every keystroke
1870 * Placeholders: {searchTerms}
1873 $wgOpenSearchTemplate = false;
1876 * Enable suggestions while typing in search boxes
1877 * (results are passed around in OpenSearch format)
1879 $wgEnableMWSuggest = false;
1882 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
1884 * Placeholders: {searchTerms}, {namespaces}, {dbname}
1887 $wgMWSuggestTemplate = false;
1890 * If you've disabled search semi-permanently, this also disables updates to the
1891 * table. If you ever re-enable, be sure to rebuild the search table.
1893 $wgDisableSearchUpdate = false;
1894 /** Uploads have to be specially set up to be secure */
1895 $wgEnableUploads = false;
1897 * Show EXIF data, on by default if available.
1898 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
1900 * NOTE FOR WINDOWS USERS:
1901 * To enable EXIF functions, add the folloing lines to the
1902 * "Windows extensions" section of php.ini:
1904 * extension=extensions/php_mbstring.dll
1905 * extension=extensions/php_exif.dll
1907 $wgShowEXIF = function_exists( 'exif_read_data' );
1910 * Set to true to enable the upload _link_ while local uploads are disabled.
1911 * Assumes that the special page link will be bounced to another server where
1914 $wgRemoteUploads = false;
1917 * Disable links to talk pages of anonymous users (IPs) in listings on special
1918 * pages like page history, Special:Recentchanges, etc.
1920 $wgDisableAnonTalk = false;
1923 * Do DELETE/INSERT for link updates instead of incremental
1925 $wgUseDumbLinkUpdate = false;
1928 * Anti-lock flags - bitfield
1930 * Preload links during link update for save
1931 * ALF_PRELOAD_EXISTENCE
1932 * Preload cur_id during replaceLinkHolders
1934 * Don't use locking reads when updating the link table. This is
1935 * necessary for wikis with a high edit rate for performance
1936 * reasons, but may cause link table inconsistency
1938 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1941 $wgAntiLockFlags = 0;
1944 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
1945 * fall back to the old behaviour (no merging).
1947 $wgDiff3 = '/usr/bin/diff3';
1950 * Path to the GNU diff utility.
1952 $wgDiff = '/usr/bin/diff';
1955 * We can also compress text stored in the 'text' table. If this is set on, new
1956 * revisions will be compressed on page save if zlib support is available. Any
1957 * compressed revisions will be decompressed on load regardless of this setting
1958 * *but will not be readable at all* if zlib support is not available.
1960 $wgCompressRevisions = false;
1963 * This is the list of preferred extensions for uploading files. Uploading files
1964 * with extensions not in this list will trigger a warning.
1966 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
1968 /** Files with these extensions will never be allowed as uploads. */
1969 $wgFileBlacklist = array(
1970 # HTML may contain cookie-stealing JavaScript and web bugs
1971 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht',
1972 # PHP scripts may execute arbitrary code on the server
1973 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
1974 # Other types that may be interpreted by some servers
1975 'shtml', 'jhtml', 'pl', 'py', 'cgi',
1976 # May contain harmful executables for Windows victims
1977 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
1979 /** Files with these mime types will never be allowed as uploads
1980 * if $wgVerifyMimeType is enabled.
1982 $wgMimeTypeBlacklist= array(
1983 # HTML may contain cookie-stealing JavaScript and web bugs
1984 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
1985 # PHP scripts may execute arbitrary code on the server
1986 'application/x-php', 'text/x-php',
1987 # Other types that may be interpreted by some servers
1988 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
1989 # Client-side hazards on Internet Explorer
1990 'text/scriptlet', 'application/x-msdownload',
1991 # Windows metafile, client-side vulnerability on some systems
1992 'application/x-msmetafile',
1993 # A ZIP file may be a valid Java archive containing an applet which exploits the
1994 # same-origin policy to steal cookies
1998 /** This is a flag to determine whether or not to check file extensions on upload. */
1999 $wgCheckFileExtensions = true;
2002 * If this is turned off, users may override the warning for files not covered
2003 * by $wgFileExtensions.
2005 $wgStrictFileExtensions = true;
2007 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
2008 $wgUploadSizeWarning = false;
2010 /** For compatibility with old installations set to false */
2011 $wgPasswordSalt = true;
2013 /** Which namespaces should support subpages?
2014 * See Language.php for a list of namespaces.
2016 $wgNamespacesWithSubpages = array(
2019 NS_USER_TALK
=> true,
2020 NS_PROJECT_TALK
=> true,
2021 NS_FILE_TALK
=> true,
2022 NS_MEDIAWIKI
=> true,
2023 NS_MEDIAWIKI_TALK
=> true,
2024 NS_TEMPLATE_TALK
=> true,
2025 NS_HELP_TALK
=> true,
2026 NS_CATEGORY_TALK
=> true
2029 $wgNamespacesToBeSearchedDefault = array(
2034 * Namespaces to be searched when user clicks the "Help" tab
2037 * Same format as $wgNamespacesToBeSearchedDefault
2039 $wgNamespacesToBeSearchedHelp = array(
2044 $wgUseOldSearchUI = true; // temp testing variable
2047 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
2048 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
2051 $wgSearchEverythingOnlyLoggedIn = false;
2054 * Site notice shown at the top of each page
2056 * This message can contain wiki text, and can also be set through the
2057 * MediaWiki:Sitenotice page, which will override this. You can also
2058 * provide a separate message for logged-out users using the
2059 * MediaWiki:Anonnotice page.
2068 * Plugins for media file type handling.
2069 * Each entry in the array maps a MIME type to a class name
2071 $wgMediaHandlers = array(
2072 'image/jpeg' => 'BitmapHandler',
2073 'image/png' => 'BitmapHandler',
2074 'image/gif' => 'BitmapHandler',
2075 'image/tiff' => 'TiffHandler',
2076 'image/x-ms-bmp' => 'BmpHandler',
2077 'image/x-bmp' => 'BmpHandler',
2078 'image/svg+xml' => 'SvgHandler', // official
2079 'image/svg' => 'SvgHandler', // compat
2080 'image/vnd.djvu' => 'DjVuHandler', // official
2081 'image/x.djvu' => 'DjVuHandler', // compat
2082 'image/x-djvu' => 'DjVuHandler', // compat
2087 * Resizing can be done using PHP's internal image libraries or using
2088 * ImageMagick or another third-party converter, e.g. GraphicMagick.
2089 * These support more file formats than PHP, which only supports PNG,
2090 * GIF, JPG, XBM and WBMP.
2092 * Use Image Magick instead of PHP builtin functions.
2094 $wgUseImageMagick = false;
2095 /** The convert command shipped with ImageMagick */
2096 $wgImageMagickConvertCommand = '/usr/bin/convert';
2098 /** Sharpening parameter to ImageMagick */
2099 $wgSharpenParameter = '0x0.4';
2101 /** Reduction in linear dimensions below which sharpening will be enabled */
2102 $wgSharpenReductionThreshold = 0.85;
2105 * Temporary directory used for ImageMagick. The directory must exist. Leave
2106 * this set to false to let ImageMagick decide for itself.
2108 $wgImageMagickTempDir = false;
2111 * Use another resizing converter, e.g. GraphicMagick
2112 * %s will be replaced with the source path, %d with the destination
2113 * %w and %h will be replaced with the width and height
2115 * An example is provided for GraphicMagick
2116 * Leave as false to skip this
2118 #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
2119 $wgCustomConvertCommand = false;
2121 # Scalable Vector Graphics (SVG) may be uploaded as images.
2122 # Since SVG support is not yet standard in browsers, it is
2123 # necessary to rasterize SVGs to PNG as a fallback format.
2125 # An external program is required to perform this conversion:
2126 $wgSVGConverters = array(
2127 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
2128 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
2129 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
2130 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
2131 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
2132 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
2134 /** Pick one of the above */
2135 $wgSVGConverter = 'ImageMagick';
2136 /** If not in the executable PATH, specify */
2137 $wgSVGConverterPath = '';
2138 /** Don't scale a SVG larger than this */
2139 $wgSVGMaxSize = 2048;
2141 * Don't thumbnail an image if it will use too much working memory
2142 * Default is 50 MB if decompressed to RGBA form, which corresponds to
2143 * 12.5 million pixels or 3500x3500
2145 $wgMaxImageArea = 1.25e7
;
2147 * Force thumbnailing of animated GIFs above this size to a single
2148 * frame instead of an animated thumbnail. ImageMagick seems to
2149 * get real unhappy and doesn't play well with resource limits. :P
2150 * Defaulting to 1 megapixel (1000x1000)
2152 $wgMaxAnimatedGifArea = 1.0e6
;
2154 * Browsers don't support TIFF inline generally...
2155 * For inline display, we need to convert to PNG or JPEG.
2156 * Note scaling should work with ImageMagick, but may not with GD scaling.
2157 * // PNG is lossless, but inefficient for photos
2158 * $wgTiffThumbnailType = array( 'png', 'image/png' );
2159 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
2160 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
2162 $wgTiffThumbnailType = false;
2164 * If rendered thumbnail files are older than this timestamp, they
2165 * will be rerendered on demand as if the file didn't already exist.
2166 * Update if there is some need to force thumbs and SVG rasterizations
2167 * to rerender, such as fixes to rendering bugs.
2169 $wgThumbnailEpoch = '20030516000000';
2172 * If set, inline scaled images will still produce <img> tags ready for
2173 * output instead of showing an error message.
2175 * This may be useful if errors are transitory, especially if the site
2176 * is configured to automatically render thumbnails on request.
2178 * On the other hand, it may obscure error conditions from debugging.
2179 * Enable the debug log or the 'thumbnail' log group to make sure errors
2180 * are logged to a file for review.
2182 $wgIgnoreImageErrors = false;
2185 * Allow thumbnail rendering on page view. If this is false, a valid
2186 * thumbnail URL is still output, but no file will be created at
2187 * the target location. This may save some time if you have a
2188 * thumb.php or 404 handler set up which is faster than the regular
2191 $wgGenerateThumbnailOnParse = true;
2194 * Show thumbnails for old images on the image description page
2196 $wgShowArchiveThumbnails = true;
2198 /** Whether or not to use image resizing */
2199 $wgUseImageResize = true;
2201 /** Set $wgCommandLineMode if it's not set already, to avoid notices */
2202 if( !isset( $wgCommandLineMode ) ) {
2203 $wgCommandLineMode = false;
2206 /** For colorized maintenance script output, is your terminal background dark ? */
2207 $wgCommandLineDarkBg = false;
2210 # Recent changes settings
2213 /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
2214 $wgPutIPinRC = true;
2217 * Recentchanges items are periodically purged; entries older than this many
2219 * Default: 13 weeks = about three months
2221 $wgRCMaxAge = 13 * 7 * 24 * 3600;
2224 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
2225 * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
2226 * for some reason, and some users may use the high numbers to display that data which is still there.
2228 $wgRCFilterByAge = false;
2231 * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
2233 $wgRCLinkLimits = array( 50, 100, 250, 500 );
2234 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
2237 * Send recent changes updates via UDP. The updates will be formatted for IRC.
2238 * Set this to the IP address of the receiver.
2240 $wgRC2UDPAddress = false;
2243 * Port number for RC updates
2245 $wgRC2UDPPort = false;
2248 * Prefix to prepend to each UDP packet.
2249 * This can be used to identify the wiki. A script is available called
2250 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
2251 * tab to identify the IRC channel to send the log line to.
2253 $wgRC2UDPPrefix = '';
2256 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
2257 * IRC feed. If this is set to a string, that string will be used as the prefix.
2259 $wgRC2UDPInterwikiPrefix = false;
2262 * Set to true to omit "bot" edits (by users with the bot permission) from the
2265 $wgRC2UDPOmitBots = false;
2268 * Enable user search in Special:Newpages
2269 * This is really a temporary hack around an index install bug on some Wikipedias.
2270 * Kill it once fixed.
2272 $wgEnableNewpagesUserFilter = true;
2275 * Whether to use metadata edition
2276 * This will put categories, language links and allowed templates in a separate text box
2277 * while editing pages
2280 $wgUseMetadataEdit = false;
2281 /** Full name (including namespace) of the page containing templates names that will be allowed as metadata */
2282 $wgMetadataWhitelist = '';
2285 # Copyright and credits settings
2288 /** RDF metadata toggles */
2289 $wgEnableDublinCoreRdf = false;
2290 $wgEnableCreativeCommonsRdf = false;
2292 /** Override for copyright metadata.
2293 * TODO: these options need documentation
2295 $wgRightsPage = NULL;
2296 $wgRightsUrl = NULL;
2297 $wgRightsText = NULL;
2298 $wgRightsIcon = NULL;
2300 /** Set this to some HTML to override the rights icon with an arbitrary logo */
2301 $wgCopyrightIcon = NULL;
2303 /** Set this to true if you want detailed copyright information forms on Upload. */
2304 $wgUseCopyrightUpload = false;
2306 /** Set this to false if you want to disable checking that detailed copyright
2307 * information values are not empty. */
2308 $wgCheckCopyrightUpload = true;
2311 * Set this to the number of authors that you want to be credited below an
2312 * article text. Set it to zero to hide the attribution block, and a negative
2313 * number (like -1) to show all authors. Note that this will require 2-3 extra
2314 * database hits, which can have a not insignificant impact on performance for
2319 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
2320 * Otherwise, link to a separate credits page. */
2321 $wgShowCreditsIfMax = true;
2326 * Set this to false to avoid forcing the first letter of links to capitals.
2327 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2328 * appearing with a capital at the beginning of a sentence will *not* go to the
2329 * same place as links in the middle of a sentence using a lowercase initial.
2331 $wgCapitalLinks = true;
2334 * List of interwiki prefixes for wikis we'll accept as sources for
2335 * Special:Import (for sysops). Since complete page history can be imported,
2336 * these should be 'trusted'.
2338 * If a user has the 'import' permission but not the 'importupload' permission,
2339 * they will only be able to run imports through this transwiki interface.
2341 $wgImportSources = array();
2344 * Optional default target namespace for interwiki imports.
2345 * Can use this to create an incoming "transwiki"-style queue.
2346 * Set to numeric key, not the name.
2348 * Users may override this in the Special:Import dialog.
2350 $wgImportTargetNamespace = null;
2353 * If set to false, disables the full-history option on Special:Export.
2354 * This is currently poorly optimized for long edit histories, so is
2355 * disabled on Wikimedia's sites.
2357 $wgExportAllowHistory = true;
2360 * If set nonzero, Special:Export requests for history of pages with
2361 * more revisions than this will be rejected. On some big sites things
2362 * could get bogged down by very very long pages.
2364 $wgExportMaxHistory = 0;
2367 * Return distinct author list (when not returning full history)
2369 $wgExportAllowListContributors = false ;
2372 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
2373 * up to this specified level, which will cause it to include all
2374 * pages linked to from the pages you specify. Since this number
2375 * can become *insanely large* and could easily break your wiki,
2376 * it's disabled by default for now.
2378 * There's a HARD CODED limit of 5 levels of recursion to prevent a
2379 * crazy-big export from being done by someone setting the depth
2380 * number too high. In other words, last resort safety net.
2382 $wgExportMaxLinkDepth = 0;
2385 * Whether to allow the "export all pages in namespace" option
2387 $wgExportFromNamespaces = false;
2390 * Edits matching these regular expressions in body text
2391 * will be recognised as spam and rejected automatically.
2393 * There's no administrator override on-wiki, so be careful what you set. :)
2394 * May be an array of regexes or a single string for backwards compatibility.
2396 * See http://en.wikipedia.org/wiki/Regular_expression
2397 * Note that each regex needs a beginning/end delimiter, eg: # or /
2399 $wgSpamRegex = array();
2401 /** Same as the above except for edit summaries */
2402 $wgSummarySpamRegex = array();
2404 /** Similarly you can get a function to do the job. The function will be given
2405 * the following args:
2406 * - a Title object for the article the edit is made on
2407 * - the text submitted in the textarea (wpTextbox1)
2408 * - the section number.
2409 * The return should be boolean indicating whether the edit matched some evilness:
2411 * - false : let it through
2413 * For a complete example, have a look at the SpamBlacklist extension.
2415 $wgFilterCallback = false;
2417 /** Go button goes straight to the edit screen if the article doesn't exist. */
2418 $wgGoToEdit = false;
2420 /** Allow raw, unchecked HTML in <html>...</html> sections.
2421 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2422 * TO RESTRICT EDITING to only those that you trust
2427 * $wgUseTidy: use tidy to make sure HTML output is sane.
2428 * Tidy is a free tool that fixes broken HTML.
2429 * See http://www.w3.org/People/Raggett/tidy/
2430 * $wgTidyBin should be set to the path of the binary and
2431 * $wgTidyConf to the path of the configuration file.
2432 * $wgTidyOpts can include any number of parameters.
2434 * $wgTidyInternal controls the use of the PECL extension to use an in-
2435 * process tidy library instead of spawning a separate program.
2436 * Normally you shouldn't need to override the setting except for
2437 * debugging. To install, use 'pear install tidy' and add a line
2438 * 'extension=tidy.so' to php.ini.
2441 $wgAlwaysUseTidy = false;
2442 $wgTidyBin = 'tidy';
2443 $wgTidyConf = $IP.'/includes/tidy.conf';
2445 $wgTidyInternal = extension_loaded( 'tidy' );
2448 * Put tidy warnings in HTML comments
2449 * Only works for internal tidy.
2451 $wgDebugTidy = false;
2454 * Validate the overall output using tidy and refuse
2455 * to display the page if it's not valid.
2457 $wgValidateAllHtml = false;
2459 /** See list of skins and their symbolic names in languages/Language.php */
2460 $wgDefaultSkin = 'monobook';
2463 * Should we allow the user's to select their own skin that will override the default?
2464 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2466 $wgAllowUserSkin = true;
2469 * Optionally, we can specify a stylesheet to use for media="handheld".
2470 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2471 * If left empty, compliant handheld browsers won't pick up the skin
2472 * stylesheet, which is specified for 'screen' media.
2474 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2475 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2477 * Will also be switched in when 'handheld=yes' is added to the URL, like
2478 * the 'printable=yes' mode for print media.
2480 $wgHandheldStyle = false;
2483 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2484 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2485 * which doesn't recognize 'handheld' but does support media queries on its
2488 * Consider only using this if you have a *really good* handheld stylesheet,
2489 * as iPhone users won't have any way to disable it and use the "grown-up"
2492 $wgHandheldForIPhone = false;
2495 * Settings added to this array will override the default globals for the user
2496 * preferences used by anonymous visitors and newly created accounts.
2497 * For instance, to disable section editing links:
2498 * $wgDefaultUserOptions ['editsection'] = 0;
2501 $wgDefaultUserOptions = array(
2506 'searchlimit' => 20,
2507 'contextlines' => 5,
2508 'contextchars' => 50,
2509 'disablesuggest' => 0,
2517 'hidepatrolled' => 0,
2518 'newpageshidepatrolled' => 0,
2519 'highlightbroken' => 1,
2520 'stubthreshold' => 0,
2521 'previewontop' => 1,
2522 'previewonfirst' => 0,
2524 'editsectiononrightclick' => 0,
2525 'editondblclick' => 0,
2529 'minordefault' => 0,
2530 'date' => 'default',
2533 'rememberpassword' => 0,
2536 'showhiddencats' => 0,
2537 'norollbackdiff' => 0,
2538 'enotifwatchlistpages' => 0,
2539 'enotifusertalkpages' => 1,
2540 'enotifminoredits' => 0,
2541 'enotifrevealaddr' => 0,
2542 'shownumberswatching' => 1,
2544 'externaleditor' => 0,
2545 'externaldiff' => 0,
2546 'forceeditsummary' => 0,
2547 'showjumplinks' => 1,
2549 'numberheadings' => 0,
2550 'uselivepreview' => 0,
2551 'watchlistdays' => 3.0,
2552 'extendwatchlist' => 0,
2553 'watchlisthideminor' => 0,
2554 'watchlisthidebots' => 0,
2555 'watchlisthideown' => 0,
2556 'watchlisthideanons' => 0,
2557 'watchlisthideliu' => 0,
2558 'watchlisthidepatrolled' => 0,
2559 'watchcreations' => 0,
2560 'watchdefault' => 0,
2562 'watchdeletion' => 0,
2563 'noconvertlink' => 0,
2564 'gender' => 'unknown',
2565 'ccmeonemails' => 0,
2570 * Whether or not to allow and use real name fields.
2571 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2574 $wgAllowRealName = true;
2576 /** An array of preferences to not show for the user */
2577 $wgHiddenPrefs = array();
2579 /*****************************************************************************
2584 * A list of callback functions which are called once MediaWiki is fully initialised
2586 $wgExtensionFunctions = array();
2589 * Extension functions for initialisation of skins. This is called somewhat earlier
2590 * than $wgExtensionFunctions.
2592 $wgSkinExtensionFunctions = array();
2595 * Extension messages files.
2597 * Associative array mapping extension name to the filename where messages can be
2598 * found. The file should contain variable assignments. Any of the variables
2599 * present in languages/messages/MessagesEn.php may be defined, but $messages
2600 * is the most common.
2602 * Variables defined in extensions will override conflicting variables defined
2606 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
2609 $wgExtensionMessagesFiles = array();
2612 * Aliases for special pages provided by extensions.
2613 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
2615 $wgExtensionAliasesFiles = array();
2618 * Parser output hooks.
2619 * This is an associative array where the key is an extension-defined tag
2620 * (typically the extension name), and the value is a PHP callback.
2621 * These will be called as an OutputPageParserOutput hook, if the relevant
2622 * tag has been registered with the parser output object.
2624 * Registration is done with $pout->addOutputHook( $tag, $data ).
2626 * The callback has the form:
2627 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
2629 $wgParserOutputHooks = array();
2632 * List of valid skin names.
2633 * The key should be the name in all lower case, the value should be a display name.
2634 * The default skins will be added later, by Skin::getSkinNames(). Use
2635 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
2637 $wgValidSkinNames = array();
2640 * Special page list.
2641 * See the top of SpecialPage.php for documentation.
2643 $wgSpecialPages = array();
2646 * Array mapping class names to filenames, for autoloading.
2648 $wgAutoloadClasses = array();
2651 * An array of extension types and inside that their names, versions, authors,
2652 * urls, descriptions and pointers to localized description msgs. Note that
2653 * the version, url, description and descriptionmsg key can be omitted.
2656 * $wgExtensionCredits[$type][] = array(
2657 * 'name' => 'Example extension',
2659 * 'path' => __FILE__,
2660 * 'author' => 'Foo Barstein',
2661 * 'url' => 'http://wwww.example.com/Example%20Extension/',
2662 * 'description' => 'An example extension',
2663 * 'descriptionmsg' => 'exampleextension-desc',
2667 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
2669 $wgExtensionCredits = array();
2672 ******************************************************************************/
2675 * Allow user Javascript page?
2676 * This enables a lot of neat customizations, but may
2677 * increase security risk to users and server load.
2679 $wgAllowUserJs = false;
2682 * Allow user Cascading Style Sheets (CSS)?
2683 * This enables a lot of neat customizations, but may
2684 * increase security risk to users and server load.
2686 $wgAllowUserCss = false;
2688 /** Use the site's Javascript page? */
2689 $wgUseSiteJs = true;
2691 /** Use the site's Cascading Style Sheets (CSS)? */
2692 $wgUseSiteCss = true;
2694 /** Filter for Special:Randompage. Part of a WHERE clause */
2695 $wgExtraRandompageSQL = false;
2697 /** Allow the "info" action, very inefficient at the moment */
2698 $wgAllowPageInfo = false;
2700 /** Maximum indent level of toc. */
2701 $wgMaxTocLevel = 999;
2703 /** Name of the external diff engine to use */
2704 $wgExternalDiffEngine = false;
2706 /** Whether to use inline diff */
2707 $wgEnableHtmlDiff = false;
2709 /** Use RC Patrolling to check for vandalism */
2710 $wgUseRCPatrol = true;
2712 /** Use new page patrolling to check new pages on Special:Newpages */
2713 $wgUseNPPatrol = true;
2715 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
2718 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
2719 * eg Recentchanges, Newpages. */
2722 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
2723 * A cached version will continue to be served out even if changes
2724 * are made, until this many seconds runs out since the last render.
2726 * If set to 0, feed caching is disabled. Use this for debugging only;
2727 * feed generation can be pretty slow with diffs.
2729 $wgFeedCacheTimeout = 60;
2731 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
2732 * pages larger than this size. */
2733 $wgFeedDiffCutoff = 32768;
2735 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
2736 * every page. Some sites might have a different feed they'd like to promote
2737 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
2738 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
2739 * of either 'rss' or 'atom'.
2741 $wgOverrideSiteFeed = array();
2744 * Additional namespaces. If the namespaces defined in Language.php and
2745 * Namespace.php are insufficient, you can create new ones here, for example,
2746 * to import Help files in other languages.
2747 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2748 * no longer be accessible. If you rename it, then you can access them through
2749 * the new namespace name.
2751 * Custom namespaces should start at 100 to avoid conflicting with standard
2752 * namespaces, and should always follow the even/odd main/talk pattern.
2754 #$wgExtraNamespaces =
2755 # array(100 => "Hilfe",
2756 # 101 => "Hilfe_Diskussion",
2758 # 103 => "Discussion_Aide"
2760 $wgExtraNamespaces = NULL;
2764 * These are alternate names for the primary localised namespace names, which
2765 * are defined by $wgExtraNamespaces and the language file. If a page is
2766 * requested with such a prefix, the request will be redirected to the primary
2769 * Set this to a map from namespace names to IDs.
2771 * $wgNamespaceAliases = array(
2772 * 'Wikipedian' => NS_USER,
2776 $wgNamespaceAliases = array();
2779 * Limit images on image description pages to a user-selectable limit. In order
2780 * to reduce disk usage, limits can only be selected from a list.
2781 * The user preference is saved as an array offset in the database, by default
2782 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
2783 * change it if you alter the array (see bug 8858).
2784 * This is the list of settings the user can choose from:
2786 $wgImageLimits = array (
2792 array(10000,10000) );
2795 * Adjust thumbnails on image pages according to a user setting. In order to
2796 * reduce disk usage, the values can only be selected from a list. This is the
2797 * list of settings the user can choose from:
2799 $wgThumbLimits = array(
2809 * Adjust width of upright images when parameter 'upright' is used
2810 * This allows a nicer look for upright images without the need to fix the width
2811 * by hardcoded px in wiki sourcecode.
2813 $wgThumbUpright = 0.75;
2816 * On category pages, show thumbnail gallery for images belonging to that
2817 * category instead of listing them as articles.
2819 $wgCategoryMagicGallery = true;
2822 * Paging limit for categories
2824 $wgCategoryPagingLimit = 200;
2827 * Should the default category sortkey be the prefixed title?
2828 * Run maintenance/refreshLinks.php after changing this.
2830 $wgCategoryPrefixedDefaultSortkey = true;
2833 * Browser Blacklist for unicode non compliant browsers
2834 * Contains a list of regexps : "/regexp/" matching problematic browsers
2836 $wgBrowserBlackList = array(
2838 * Netscape 2-4 detection
2839 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2840 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2841 * with a negative assertion. The [UIN] identifier specifies the level of security
2842 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2843 * The language string is unreliable, it is missing on NS4 Mac.
2845 * Reference: http://www.psychedelix.com/agents/index.shtml
2847 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2848 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2849 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2852 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2855 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2856 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2857 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2860 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2861 * @link http://en.wikipedia.org/wiki/Template%3AOS9
2863 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2866 * Google wireless transcoder, seems to eat a lot of chars alive
2867 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2869 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2873 * Fake out the timezone that the server thinks it's in. This will be used for
2874 * date display and not for what's stored in the DB. Leave to null to retain
2875 * your server's OS-based timezone value. This is the same as the timezone.
2877 * This variable is currently used ONLY for signature formatting, not for
2880 * Timezones can be translated by editing MediaWiki messages of type
2881 * timezone-nameinlowercase like timezone-utc.
2883 # $wgLocaltimezone = 'GMT';
2884 # $wgLocaltimezone = 'PST8PDT';
2885 # $wgLocaltimezone = 'Europe/Sweden';
2886 # $wgLocaltimezone = 'CET';
2887 $wgLocaltimezone = null;
2890 * Set an offset from UTC in minutes to use for the default timezone setting
2891 * for anonymous users and new user accounts.
2893 * This setting is used for most date/time displays in the software, and is
2894 * overrideable in user preferences. It is *not* used for signature timestamps.
2896 * You can set it to match the configured server timezone like this:
2897 * $wgLocalTZoffset = date("Z") / 60;
2899 * If your server is not configured for the timezone you want, you can set
2900 * this in conjunction with the signature timezone and override the TZ
2901 * environment variable like so:
2902 * $wgLocaltimezone="Europe/Berlin";
2903 * putenv("TZ=$wgLocaltimezone");
2904 * $wgLocalTZoffset = date("Z") / 60;
2906 * Leave at NULL to show times in universal time (UTC/GMT).
2908 $wgLocalTZoffset = null;
2912 * When translating messages with wfMsg(), it is not always clear what should
2913 * be considered UI messages and what should be content messages.
2915 * For example, for the English Wikipedia, there should be only one 'mainpage',
2916 * so when getting the link for 'mainpage', we should treat it as site content
2917 * and call wfMsgForContent(), but for rendering the text of the link, we call
2918 * wfMsg(). The code behaves this way by default. However, sites like the
2919 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2920 * different languages. This array provides a way to override the default
2921 * behavior. For example, to allow language-specific main page and community
2924 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2926 $wgForceUIMsgAsContentMsg = array();
2930 * Authentication plugin.
2935 * Global list of hooks.
2936 * Add a hook by doing:
2937 * $wgHooks['event_name'][] = $function;
2939 * $wgHooks['event_name'][] = array($function, $data);
2941 * $wgHooks['event_name'][] = array($object, 'method');
2946 * The logging system has two levels: an event type, which describes the
2947 * general category and can be viewed as a named subset of all logs; and
2948 * an action, which is a specific kind of event that can exist in that
2951 $wgLogTypes = array( '',
2965 * This restricts log access to those who have a certain right
2966 * Users without this will not see it in the option menu and can not view it
2967 * Restricted logs are not added to recent changes
2968 * Logs should remain non-transcludable
2969 * Format: logtype => permissiontype
2971 $wgLogRestrictions = array(
2972 'suppress' => 'suppressionlog'
2976 * Show/hide links on Special:Log will be shown for these log types.
2978 * This is associative array of log type => boolean "hide by default"
2980 * See $wgLogTypes for a list of available log types.
2983 * $wgFilterLogTypes => array(
2985 * 'import' => false,
2988 * Will display show/hide links for the move and import logs. Move logs will be
2989 * hidden by default unless the link is clicked. Import logs will be shown by
2990 * default, and hidden when the link is clicked.
2992 * A message of the form log-show-hide-<type> should be added, and will be used
2993 * for the link text.
2995 $wgFilterLogTypes = array(
3000 * Lists the message key string for each log type. The localized messages
3001 * will be listed in the user interface.
3003 * Extensions with custom log types may add to this array.
3005 $wgLogNames = array(
3006 '' => 'all-logs-page',
3007 'block' => 'blocklogpage',
3008 'protect' => 'protectlogpage',
3009 'rights' => 'rightslog',
3010 'delete' => 'dellogpage',
3011 'upload' => 'uploadlogpage',
3012 'move' => 'movelogpage',
3013 'import' => 'importlogpage',
3014 'patrol' => 'patrol-log-page',
3015 'merge' => 'mergelog',
3016 'suppress' => 'suppressionlog',
3020 * Lists the message key string for descriptive text to be shown at the
3021 * top of each log type.
3023 * Extensions with custom log types may add to this array.
3025 $wgLogHeaders = array(
3026 '' => 'alllogstext',
3027 'block' => 'blocklogtext',
3028 'protect' => 'protectlogtext',
3029 'rights' => 'rightslogtext',
3030 'delete' => 'dellogpagetext',
3031 'upload' => 'uploadlogpagetext',
3032 'move' => 'movelogpagetext',
3033 'import' => 'importlogpagetext',
3034 'patrol' => 'patrol-log-header',
3035 'merge' => 'mergelogpagetext',
3036 'suppress' => 'suppressionlogtext',
3040 * Lists the message key string for formatting individual events of each
3041 * type and action when listed in the logs.
3043 * Extensions with custom log types may add to this array.
3045 $wgLogActions = array(
3046 'block/block' => 'blocklogentry',
3047 'block/unblock' => 'unblocklogentry',
3048 'block/reblock' => 'reblock-logentry',
3049 'protect/protect' => 'protectedarticle',
3050 'protect/modify' => 'modifiedarticleprotection',
3051 'protect/unprotect' => 'unprotectedarticle',
3052 'protect/move_prot' => 'movedarticleprotection',
3053 'rights/rights' => 'rightslogentry',
3054 'delete/delete' => 'deletedarticle',
3055 'delete/restore' => 'undeletedarticle',
3056 'delete/revision' => 'revdelete-logentry',
3057 'delete/event' => 'logdelete-logentry',
3058 'upload/upload' => 'uploadedimage',
3059 'upload/overwrite' => 'overwroteimage',
3060 'upload/revert' => 'uploadedimage',
3061 'move/move' => '1movedto2',
3062 'move/move_redir' => '1movedto2_redir',
3063 'import/upload' => 'import-logentry-upload',
3064 'import/interwiki' => 'import-logentry-interwiki',
3065 'merge/merge' => 'pagemerge-logentry',
3066 'suppress/revision' => 'revdelete-logentry',
3067 'suppress/file' => 'revdelete-logentry',
3068 'suppress/event' => 'logdelete-logentry',
3069 'suppress/delete' => 'suppressedarticle',
3070 'suppress/block' => 'blocklogentry',
3071 'suppress/reblock' => 'reblock-logentry',
3075 * The same as above, but here values are names of functions,
3078 $wgLogActionsHandlers = array();
3081 * Maintain a log of newusers at Log/newusers?
3083 $wgNewUserLog = true;
3086 * List of special pages, followed by what subtitle they should go under
3087 * at Special:SpecialPages
3089 $wgSpecialPageGroups = array(
3090 'DoubleRedirects' => 'maintenance',
3091 'BrokenRedirects' => 'maintenance',
3092 'Lonelypages' => 'maintenance',
3093 'Uncategorizedpages' => 'maintenance',
3094 'Uncategorizedcategories' => 'maintenance',
3095 'Uncategorizedimages' => 'maintenance',
3096 'Uncategorizedtemplates' => 'maintenance',
3097 'Unusedcategories' => 'maintenance',
3098 'Unusedimages' => 'maintenance',
3099 'Protectedpages' => 'maintenance',
3100 'Protectedtitles' => 'maintenance',
3101 'Unusedtemplates' => 'maintenance',
3102 'Withoutinterwiki' => 'maintenance',
3103 'Longpages' => 'maintenance',
3104 'Shortpages' => 'maintenance',
3105 'Ancientpages' => 'maintenance',
3106 'Deadendpages' => 'maintenance',
3107 'Wantedpages' => 'maintenance',
3108 'Wantedcategories' => 'maintenance',
3109 'Wantedfiles' => 'maintenance',
3110 'Wantedtemplates' => 'maintenance',
3111 'Unwatchedpages' => 'maintenance',
3112 'Fewestrevisions' => 'maintenance',
3114 'Userlogin' => 'login',
3115 'Userlogout' => 'login',
3116 'CreateAccount' => 'login',
3118 'Recentchanges' => 'changes',
3119 'Recentchangeslinked' => 'changes',
3120 'Watchlist' => 'changes',
3121 'Newimages' => 'changes',
3122 'Newpages' => 'changes',
3124 'Tags' => 'changes',
3126 'Upload' => 'media',
3127 'Listfiles' => 'media',
3128 'MIMEsearch' => 'media',
3129 'FileDuplicateSearch' => 'media',
3130 'Filepath' => 'media',
3132 'Listusers' => 'users',
3133 'Activeusers' => 'users',
3134 'Listgrouprights' => 'users',
3135 'Ipblocklist' => 'users',
3136 'Contributions' => 'users',
3137 'Emailuser' => 'users',
3138 'Listadmins' => 'users',
3139 'Listbots' => 'users',
3140 'Userrights' => 'users',
3141 'Blockip' => 'users',
3142 'Preferences' => 'users',
3143 'Resetpass' => 'users',
3144 'DeletedContributions' => 'users',
3146 'Mostlinked' => 'highuse',
3147 'Mostlinkedcategories' => 'highuse',
3148 'Mostlinkedtemplates' => 'highuse',
3149 'Mostcategories' => 'highuse',
3150 'Mostimages' => 'highuse',
3151 'Mostrevisions' => 'highuse',
3153 'Allpages' => 'pages',
3154 'Prefixindex' => 'pages',
3155 'Listredirects' => 'pages',
3156 'Categories' => 'pages',
3157 'Disambiguations' => 'pages',
3159 'Randompage' => 'redirects',
3160 'Randomredirect' => 'redirects',
3161 'Mypage' => 'redirects',
3162 'Mytalk' => 'redirects',
3163 'Mycontributions' => 'redirects',
3164 'Search' => 'redirects',
3165 'LinkSearch' => 'redirects',
3167 'Movepage' => 'pagetools',
3168 'MergeHistory' => 'pagetools',
3169 'Revisiondelete' => 'pagetools',
3170 'Undelete' => 'pagetools',
3171 'Export' => 'pagetools',
3172 'Import' => 'pagetools',
3173 'Whatlinkshere' => 'pagetools',
3175 'Statistics' => 'wiki',
3176 'Version' => 'wiki',
3178 'Unlockdb' => 'wiki',
3179 'Allmessages' => 'wiki',
3180 'Popularpages' => 'wiki',
3182 'Specialpages' => 'other',
3183 'Blockme' => 'other',
3184 'Booksources' => 'other',
3188 * Experimental preview feature to fetch rendered text
3189 * over an XMLHttpRequest from JavaScript instead of
3190 * forcing a submit and reload of the whole page.
3191 * Leave disabled unless you're testing it.
3193 $wgLivePreview = false;
3196 * Disable the internal MySQL-based search, to allow it to be
3197 * implemented by an extension instead.
3199 $wgDisableInternalSearch = false;
3202 * Set this to a URL to forward search requests to some external location.
3203 * If the URL includes '$1', this will be replaced with the URL-encoded
3206 * For example, to forward to Google you'd have something like:
3207 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3208 * '&domains=http://example.com' .
3209 * '&sitesearch=http://example.com' .
3210 * '&ie=utf-8&oe=utf-8';
3212 $wgSearchForwardUrl = null;
3215 * Set a default target for external links, e.g. _blank to pop up a new window
3217 $wgExternalLinkTarget = false;
3220 * If true, external URL links in wiki text will be given the
3221 * rel="nofollow" attribute as a hint to search engines that
3222 * they should not be followed for ranking purposes as they
3223 * are user-supplied and thus subject to spamming.
3225 $wgNoFollowLinks = true;
3228 * Namespaces in which $wgNoFollowLinks doesn't apply.
3229 * See Language.php for a list of namespaces.
3231 $wgNoFollowNsExceptions = array();
3234 * If this is set to an array of domains, external links to these domain names
3235 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3236 * value of $wgNoFollowLinks. For instance:
3238 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3240 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3241 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3244 $wgNoFollowDomainExceptions = array();
3247 * Default robot policy. The default policy is to encourage indexing and fol-
3248 * lowing of links. It may be overridden on a per-namespace and/or per-page
3251 $wgDefaultRobotPolicy = 'index,follow';
3254 * Robot policies per namespaces. The default policy is given above, the array
3255 * is made of namespace constants as defined in includes/Defines.php. You can-
3256 * not specify a different default policy for NS_SPECIAL: it is always noindex,
3257 * nofollow. This is because a number of special pages (e.g., ListPages) have
3258 * many permutations of options that display the same data under redundant
3259 * URLs, so search engine spiders risk getting lost in a maze of twisty special
3260 * pages, all alike, and never reaching your actual content.
3263 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
3265 $wgNamespaceRobotPolicies = array();
3268 * Robot policies per article. These override the per-namespace robot policies.
3269 * Must be in the form of an array where the key part is a properly canonical-
3270 * ised text form title and the value is a robot policy.
3272 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
3273 * 'User:Bob' => 'index,follow' );
3274 * Example that DOES NOT WORK because the names are not canonical text forms:
3275 * $wgArticleRobotPolicies = array(
3276 * # Underscore, not space!
3277 * 'Main_Page' => 'noindex,follow',
3278 * # "Project", not the actual project name!
3279 * 'Project:X' => 'index,follow',
3280 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false)!
3281 * 'abc' => 'noindex,nofollow'
3284 $wgArticleRobotPolicies = array();
3287 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
3288 * will not function, so users can't decide whether pages in that namespace are
3289 * indexed by search engines. If set to null, default to $wgContentNamespaces.
3291 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
3293 $wgExemptFromUserRobotsControl = null;
3296 * Specifies the minimal length of a user password. If set to 0, empty pass-
3297 * words are allowed.
3299 $wgMinimalPasswordLength = 1;
3302 * Activate external editor interface for files and pages
3303 * See http://meta.wikimedia.org/wiki/Help:External_editors
3305 $wgUseExternalEditor = true;
3307 /** Whether or not to sort special pages in Special:Specialpages */
3309 $wgSortSpecialPages = true;
3312 * Specify the name of a skin that should not be presented in the list of a-
3313 * vailable skins. Use for blacklisting a skin which you do not want to remove
3314 * from the .../skins/ directory
3317 $wgSkipSkins = array(); # More of the same
3320 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
3322 $wgDisabledActions = array();
3325 * Disable redirects to special pages and interwiki redirects, which use a 302
3326 * and have no "redirected from" link.
3328 $wgDisableHardRedirects = false;
3331 * Use http.dnsbl.sorbs.net to check for open proxies
3333 $wgEnableSorbs = false;
3334 $wgSorbsUrl = 'http.dnsbl.sorbs.net.';
3337 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3338 * what the other methods might say.
3340 $wgProxyWhitelist = array();
3343 * Simple rate limiter options to brake edit floods. Maximum number actions
3344 * allowed in the given number of seconds; after that the violating client re-
3345 * ceives HTTP 500 error pages until the period elapses.
3347 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3349 * This option set is experimental and likely to change. Requires memcached.
3351 $wgRateLimits = array(
3353 'anon' => null, // for any and all anonymous edits (aggregate)
3354 'user' => null, // for each logged-in user
3355 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3356 'ip' => null, // for each anon and recent account
3357 'subnet' => null, // ... with final octet removed
3365 'mailpassword' => array(
3368 'emailuser' => array(
3374 * Set to a filename to log rate limiter hits.
3376 $wgRateLimitLog = null;
3379 * Array of groups which should never trigger the rate limiter
3381 * @deprecated as of 1.13.0, the preferred method is using
3382 * $wgGroupPermissions[]['noratelimit']. However, this will still
3385 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3387 $wgRateLimitsExcludedGroups = array();
3390 * On Special:Unusedimages, consider images "used", if they are put
3391 * into a category. Default (false) is not to count those as used.
3393 $wgCountCategorizedImagesAsUsed = false;
3396 * External stores allow including content
3397 * from non database sources following URL links
3399 * Short names of ExternalStore classes may be specified in an array here:
3400 * $wgExternalStores = array("http","file","custom")...
3402 * CAUTION: Access to database might lead to code execution
3404 $wgExternalStores = false;
3407 * An array of external mysql servers, e.g.
3408 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
3409 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
3411 $wgExternalServers = array();
3414 * The place to put new revisions, false to put them in the local text table.
3415 * Part of a URL, e.g. DB://cluster1
3417 * Can be an array instead of a single string, to enable data distribution. Keys
3418 * must be consecutive integers, starting at zero. Example:
3420 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
3423 $wgDefaultExternalStore = false;
3426 * Revision text may be cached in $wgMemc to reduce load on external storage
3427 * servers and object extraction overhead for frequently-loaded revisions.
3429 * Set to 0 to disable, or number of seconds before cache expiry.
3431 $wgRevisionCacheExpiry = 0;
3434 * list of trusted media-types and mime types.
3435 * Use the MEDIATYPE_xxx constants to represent media types.
3436 * This list is used by Image::isSafeFile
3438 * Types not listed here will have a warning about unsafe content
3439 * displayed on the images description page. It would also be possible
3440 * to use this for further restrictions, like disabling direct
3441 * [[media:...]] links for non-trusted formats.
3443 $wgTrustedMediaFormats= array(
3444 MEDIATYPE_BITMAP
, //all bitmap formats
3445 MEDIATYPE_AUDIO
, //all audio formats
3446 MEDIATYPE_VIDEO
, //all plain video formats
3447 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
3448 "application/pdf", //PDF files
3449 #"application/x-shockwave-flash", //flash/shockwave movie
3453 * Allow special page inclusions such as {{Special:Allpages}}
3455 $wgAllowSpecialInclusion = true;
3458 * Timeout for HTTP requests done via CURL
3463 * Servers placed behind an internal firewall may need an HTTP proxy
3464 * to reach external resources such as remote image repositories and
3465 * spam blacklist updates.
3467 * If set, this HTTP proxy setting will be used for CURL requests.
3468 * Currently this setting has no effect if CURL is unavailable.
3470 * Include the IP or hostname and port number of the proxy,
3471 * something like "proxy-address.example.com:8080"
3473 $wgHTTPProxy = false;
3476 * Enable interwiki transcluding. Only when iw_trans=1.
3478 $wgEnableScaryTranscluding = false;
3480 * Expiry time for interwiki transclusion
3482 $wgTranscludeCacheExpiry = 3600;
3485 * Support blog-style "trackbacks" for articles. See
3486 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3488 $wgUseTrackbacks = false;
3491 * Enable filtering of categories in Recentchanges
3493 $wgAllowCategorizedRecentChanges = false ;
3496 * Number of jobs to perform per request. May be less than one in which case
3497 * jobs are performed probabalistically. If this is zero, jobs will not be done
3498 * during ordinary apache requests. In this case, maintenance/runJobs.php should
3499 * be run periodically.
3504 * Number of rows to update per job
3506 $wgUpdateRowsPerJob = 500;
3509 * Number of rows to update per query
3511 $wgUpdateRowsPerQuery = 10;
3514 * Enable AJAX framework
3519 * List of Ajax-callable functions.
3520 * Extensions acting as Ajax callbacks must register here
3522 $wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
3525 * Enable watching/unwatching pages using AJAX.
3526 * Requires $wgUseAjax to be true too.
3527 * Causes wfAjaxWatch to be added to $wgAjaxExportList
3529 $wgAjaxWatch = true;
3532 * Enable AJAX check for file overwrite, pre-upload
3534 $wgAjaxUploadDestCheck = true;
3537 * Enable previewing licences via AJAX
3539 $wgAjaxLicensePreview = true;
3542 * Allow DISPLAYTITLE to change title display
3544 $wgAllowDisplayTitle = true;
3547 * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
3549 $wgRestrictDisplayTitle = true;
3552 * Array of usernames which may not be registered or logged in from
3553 * Maintenance scripts can still use these
3555 $wgReservedUsernames = array(
3556 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3557 'Conversion script', // Used for the old Wikipedia software upgrade
3558 'Maintenance script', // Maintenance scripts which perform editing, image import script
3559 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3560 'msg:double-redirect-fixer', // Automatic double redirect fix
3564 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
3565 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
3566 * crap files as images. When this directive is on, <title> will be allowed in files with
3567 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
3568 * and doesn't send appropriate MIME types for SVG images.
3570 $wgAllowTitlesInSVG = false;
3573 * Array of namespaces which can be deemed to contain valid "content", as far
3574 * as the site statistics are concerned. Useful if additional namespaces also
3575 * contain "content" which should be considered when generating a count of the
3576 * number of articles in the wiki.
3578 $wgContentNamespaces = array( NS_MAIN
);
3581 * Maximum amount of virtual memory available to shell processes under linux, in KB.
3583 $wgMaxShellMemory = 102400;
3586 * Maximum file size created by shell processes under linux, in KB
3587 * ImageMagick convert for example can be fairly hungry for scratch space
3589 $wgMaxShellFileSize = 102400;
3592 * Maximum CPU time in seconds for shell processes under linux
3594 $wgMaxShellTime = 180;
3597 * Executable name of PHP cli client (php/php5)
3603 * Path of the djvudump executable
3604 * Enable this and $wgDjvuRenderer to enable djvu rendering
3606 # $wgDjvuDump = 'djvudump';
3610 * Path of the ddjvu DJVU renderer
3611 * Enable this and $wgDjvuDump to enable djvu rendering
3613 # $wgDjvuRenderer = 'ddjvu';
3614 $wgDjvuRenderer = null;
3617 * Path of the djvutxt DJVU text extraction utility
3618 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
3620 # $wgDjvuTxt = 'djvutxt';
3624 * Path of the djvutoxml executable
3625 * This works like djvudump except much, much slower as of version 3.5.
3627 * For now I recommend you use djvudump instead. The djvuxml output is
3628 * probably more stable, so we'll switch back to it as soon as they fix
3629 * the efficiency problem.
3630 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
3632 # $wgDjvuToXML = 'djvutoxml';
3633 $wgDjvuToXML = null;
3637 * Shell command for the DJVU post processor
3638 * Default: pnmtopng, since ddjvu generates ppm output
3639 * Set this to false to output the ppm file directly.
3641 $wgDjvuPostProcessor = 'pnmtojpeg';
3643 * File extension for the DJVU post processor output
3645 $wgDjvuOutputExtension = 'jpg';
3648 * Enable the MediaWiki API for convenient access to
3649 * machine-readable data via api.php
3651 * See http://www.mediawiki.org/wiki/API
3653 $wgEnableAPI = true;
3656 * Allow the API to be used to perform write operations
3657 * (page edits, rollback, etc.) when an authorised user
3660 $wgEnableWriteAPI = true;
3663 * API module extensions
3664 * Associative array mapping module name to class name.
3665 * Extension modules may override the core modules.
3667 $wgAPIModules = array();
3668 $wgAPIMetaModules = array();
3669 $wgAPIPropModules = array();
3670 $wgAPIListModules = array();
3673 * Maximum amount of rows to scan in a DB query in the API
3674 * The default value is generally fine
3676 $wgAPIMaxDBRows = 5000;
3679 * The maximum size (in bytes) of an API result.
3680 * Don't set this lower than $wgMaxArticleSize*1024
3682 $wgAPIMaxResultSize = 8388608;
3685 * The maximum number of uncached diffs that can be retrieved in one API
3686 * request. Set this to 0 to disable API diffs altogether
3688 $wgAPIMaxUncachedDiffs = 1;
3691 * Parser test suite files to be run by parserTests.php when no specific
3692 * filename is passed to it.
3694 * Extensions may add their own tests to this array, or site-local tests
3695 * may be added via LocalSettings.php
3699 $wgParserTestFiles = array(
3700 "$IP/maintenance/parserTests.txt",
3704 * Break out of framesets. This can be used to prevent external sites from
3705 * framing your site with ads.
3707 $wgBreakFrames = false;
3710 * Set this to an array of special page names to prevent
3711 * maintenance/updateSpecialPages.php from updating those pages.
3713 $wgDisableQueryPageUpdate = false;
3716 * Disable output compression (enabled by default if zlib is available)
3718 $wgDisableOutputCompression = false;
3721 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
3722 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
3723 * show a more obvious warning.
3725 $wgSlaveLagWarning = 10;
3726 $wgSlaveLagCritical = 30;
3729 * Parser configuration. Associative array with the following members:
3731 * class The class name
3733 * preprocessorClass The preprocessor class. Two classes are currently available:
3734 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
3735 * storage, and Preprocessor_DOM, which uses the DOM module for
3736 * temporary storage. Preprocessor_DOM generally uses less memory;
3737 * the speed of the two is roughly the same.
3739 * If this parameter is not given, it uses Preprocessor_DOM if the
3740 * DOM module is available, otherwise it uses Preprocessor_Hash.
3742 * The entire associative array will be passed through to the constructor as
3743 * the first parameter. Note that only Setup.php can use this variable --
3744 * the configuration will change at runtime via $wgParser member functions, so
3745 * the contents of this variable will be out-of-date. The variable can only be
3746 * changed during LocalSettings.php, in particular, it can't be changed during
3747 * an extension setup function.
3749 $wgParserConf = array(
3750 'class' => 'Parser',
3751 #'preprocessorClass' => 'Preprocessor_Hash',
3755 * LinkHolderArray batch size
3758 $wgLinkHolderBatchSize = 1000;
3761 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
3762 * use this value to override:
3764 $wgRegisterInternalExternals = false;
3767 * Hooks that are used for outputting exceptions. Format is:
3768 * $wgExceptionHooks[] = $funcname
3770 * $wgExceptionHooks[] = array( $class, $funcname )
3771 * Hooks should return strings or false
3773 $wgExceptionHooks = array();
3776 * Page property link table invalidation lists. Should only be set by exten-
3779 $wgPagePropLinkInvalidations = array(
3780 'hiddencat' => 'categorylinks',
3784 * Maximum number of links to a redirect page listed on
3785 * Special:Whatlinkshere/RedirectDestination
3787 $wgMaxRedirectLinksRetrieved = 500;
3790 * Maximum number of calls per parse to expensive parser functions such as
3793 $wgExpensiveParserFunctionLimit = 100;
3796 * Maximum number of pages to move at once when moving subpages with a page.
3798 $wgMaximumMovedPages = 100;
3801 * Fix double redirects after a page move.
3802 * Tends to conflict with page move vandalism, use only on a private wiki.
3804 $wgFixDoubleRedirects = false;
3807 * Max number of redirects to follow when resolving redirects.
3808 * 1 means only the first redirect is followed (default behavior).
3809 * 0 or less means no redirects are followed.
3811 $wgMaxRedirects = 1;
3814 * Array of invalid page redirect targets.
3815 * Attempting to create a redirect to any of the pages in this array
3816 * will make the redirect fail.
3817 * Userlogout is hard-coded, so it does not need to be listed here.
3818 * (bug 10569) Disallow Mypage and Mytalk as well.
3820 * As of now, this only checks special pages. Redirects to pages in
3821 * other namespaces cannot be invalidated by this variable.
3823 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
3826 * Array of namespaces to generate a sitemap for when the
3827 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
3828 * nerated for all namespaces.
3830 $wgSitemapNamespaces = false;
3834 * If user doesn't specify any edit summary when making a an edit, MediaWiki
3835 * will try to automatically create one. This feature can be disabled by set-
3836 * ting this variable false.
3838 $wgUseAutomaticEditSummaries = true;
3841 * Limit password attempts to X attempts per Y seconds per IP per account.
3842 * Requires memcached.
3844 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3847 * Display user edit counts in various prominent places.
3849 $wgEdititis = false;
3852 * Enable the UniversalEditButton for browsers that support it
3853 * (currently only Firefox with an extension)
3854 * See http://universaleditbutton.org for more background information
3856 $wgUniversalEditButton = true;
3859 * Allow id's that don't conform to HTML4 backward compatibility requirements.
3860 * This is currently for testing; if all goes well, this option will be removed
3861 * and the functionality will be enabled universally.
3863 $wgEnforceHtmlIds = true;
3866 * Search form behavior
3867 * true = use Go & Search buttons
3868 * false = use Go button & Advanced search link
3870 $wgUseTwoButtonsSearchForm = true;
3873 * Preprocessor caching threshold
3875 $wgPreprocessorCacheThreshold = 1000;
3878 * Allow filtering by change tag in recentchanges, history, etc
3879 * Has no effect if no tags are defined in valid_tag.
3881 $wgUseTagFilter = true;
3884 * Allow redirection to another page when a user logs in.
3885 * To enable, set to a string like 'Main Page'
3887 $wgRedirectOnLogin = null;
3890 * Characters to prevent during new account creations.
3891 * This is used in a regular expression character class during
3892 * registration (regex metacharacters like / are escaped).
3894 $wgInvalidUsernameCharacters = '@';
3897 * Character used as a delimiter when testing for interwiki userrights
3898 * (In Special:UserRights, it is possible to modify users on different
3899 * databases if the delimiter is used, e.g. Someuser@enwiki).
3901 * It is recommended that you have this delimiter in
3902 * $wgInvalidUsernameCharacters above, or you will not be able to
3903 * modify the user rights of those users via Special:UserRights
3905 $wgUserrightsInterwikiDelimiter = '@';
3908 * Configuration for processing pool control, for use in high-traffic wikis.
3909 * An implementation is provided in the PoolCounter extension.
3911 * This configuration array maps pool types to an associative array. The only
3912 * defined key in the associative array is "class", which gives the class name.
3913 * The remaining elements are passed through to the class as constructor
3914 * parameters. Example:
3916 * $wgPoolCounterConf = array( 'Article::view' => array(
3917 * 'class' => 'PoolCounter_Client',
3918 * ... any extension-specific options...
3921 $wgPoolCounterConf = null;