3 * Default values for MediaWiki configuration settings.
9 * To customize your installation, edit "LocalSettings.php". If you make
10 * changes here, they will be lost on next upgrade of MediaWiki!
12 * In this file, variables whose default values depend on other
13 * variables are set to false. The actual default value of these variables
14 * will only be set in Setup.php, taking into account any custom settings
15 * performed in LocalSettings.php.
17 * Documentation is in the source and on:
18 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 * @warning Note: this (and other things) will break if the autoloader is not
21 * enabled. Please include includes/AutoLoader.php before including this file.
23 * This program is free software; you can redistribute it and/or modify
24 * it under the terms of the GNU General Public License as published by
25 * the Free Software Foundation; either version 2 of the License, or
26 * (at your option) any later version.
28 * This program is distributed in the hope that it will be useful,
29 * but WITHOUT ANY WARRANTY; without even the implied warranty of
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
31 * GNU General Public License for more details.
33 * You should have received a copy of the GNU General Public License along
34 * with this program; if not, write to the Free Software Foundation, Inc.,
35 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
36 * http://www.gnu.org/copyleft/gpl.html
42 * @defgroup Globalsettings Global settings
46 * @cond file_level_code
47 * This is not a valid entry point, perform no further processing unless
48 * MEDIAWIKI is defined
50 if( !defined( 'MEDIAWIKI' ) ) {
51 echo "This file is part of MediaWiki and is not a valid entry point\n";
56 * wgConf hold the site configuration.
57 * Not used for much in a default install.
59 $wgConf = new SiteConfiguration
;
61 /** MediaWiki version number */
62 $wgVersion = '1.21alpha';
64 /** Name of the site. It must be changed in LocalSettings.php */
65 $wgSitename = 'MediaWiki';
72 * $wgServer = 'http://example.com';
75 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
76 * wrong server, it will redirect incorrectly after you save a page. In that
77 * case, set this variable to fix it.
79 * If you want to use protocol-relative URLs on your wiki, set this to a
80 * protocol-relative URL like '//example.com' and set $wgCanonicalServer
81 * to a fully qualified URL.
83 $wgServer = WebRequest
::detectServer();
86 * Canonical URL of the server, to use in IRC feeds and notification e-mails.
87 * Must be fully qualified, even if $wgServer is protocol-relative.
89 * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
91 $wgCanonicalServer = false;
93 /************************************************************************//**
94 * @name Script path settings
99 * The path we should point to.
100 * It might be a virtual path in case with use apache mod_rewrite for example.
102 * This *needs* to be set correctly.
104 * Other paths will be set to defaults based on it unless they are directly
105 * set in LocalSettings.php
107 $wgScriptPath = '/wiki';
110 * Whether to support URLs like index.php/Page_title These often break when PHP
111 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
112 * but then again it may not; lighttpd converts incoming path data to lowercase
113 * on systems with case-insensitive filesystems, and there have been reports of
114 * problems on Apache as well.
116 * To be safe we'll continue to keep it off by default.
118 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
119 * incorrect garbage, or to true if it is really correct.
121 * The default $wgArticlePath will be set based on this value at runtime, but if
122 * you have customized it, having this incorrectly set to true can cause
123 * redirect loops when "pretty URLs" are used.
126 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
127 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
128 ( strpos( php_sapi_name(), 'isapi' ) === false );
131 * The extension to append to script names by default. This can either be .php
134 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
135 * variable is provided to support those providers.
137 $wgScriptExtension = '.php';
142 /************************************************************************//**
143 * @name URLs and file paths
145 * These various web and file path variables are set to their defaults
146 * in Setup.php if they are not explicitly set from LocalSettings.php.
148 * These will relatively rarely need to be set manually, unless you are
149 * splitting style sheets or images outside the main document root.
151 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
152 * the host part, that starts with a slash. In most cases a full URL is also
153 * acceptable. A "directory" is a local file path.
155 * In both paths and directories, trailing slashes should not be included.
161 * The URL path to index.php.
163 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
168 * The URL path to redirect.php. This is a script that is used by the Nostalgia
171 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
173 $wgRedirectScript = false;
176 * The URL path to load.php.
178 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
180 $wgLoadScript = false;
183 * The URL path of the skins directory.
184 * Defaults to "{$wgScriptPath}/skins".
186 $wgStylePath = false;
187 $wgStyleSheetPath = &$wgStylePath;
190 * The URL path of the skins directory. Should not point to an external domain.
191 * Defaults to "{$wgScriptPath}/skins".
193 $wgLocalStylePath = false;
196 * The URL path of the extensions directory.
197 * Defaults to "{$wgScriptPath}/extensions".
200 $wgExtensionAssetsPath = false;
203 * Filesystem stylesheets directory.
204 * Defaults to "{$IP}/skins".
206 $wgStyleDirectory = false;
209 * The URL path for primary article page views. This path should contain $1,
210 * which is replaced by the article title.
212 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1",
213 * depending on $wgUsePathInfo.
215 $wgArticlePath = false;
218 * The URL path for the images directory.
219 * Defaults to "{$wgScriptPath}/images".
221 $wgUploadPath = false;
224 * The filesystem path of the images directory. Defaults to "{$IP}/images".
226 $wgUploadDirectory = false;
229 * Directory where the cached page will be saved.
230 * Defaults to "{$wgUploadDirectory}/cache".
232 $wgFileCacheDirectory = false;
235 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
236 * Defaults to "{$wgStylePath}/common/images/wiki.png".
241 * The URL path of the shortcut icon.
243 $wgFavicon = '/favicon.ico';
246 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
247 * Defaults to no icon.
249 $wgAppleTouchIcon = false;
252 * The local filesystem path to a temporary directory. This is not required to
255 * When this setting is set to false, its value will be set through a call
256 * to wfTempDir(). See that methods implementation for the actual detection
259 * Developers should use the global function wfTempDir() instead of this
263 * @note Default changed to false in MediaWiki 1.20.
266 $wgTmpDirectory = false;
269 * If set, this URL is added to the start of $wgUploadPath to form a complete
272 $wgUploadBaseUrl = '';
275 * To enable remote on-demand scaling, set this to the thumbnail base URL.
276 * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
277 * where 'e6' are the first two characters of the MD5 hash of the file name.
278 * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
280 $wgUploadStashScalerBaseUrl = false;
283 * To set 'pretty' URL paths for actions other than
284 * plain page views, add to this array.
287 * Set pretty URL for the edit action:
289 * 'edit' => "$wgScriptPath/edit/$1"
292 * There must be an appropriate script or rewrite rule in place to handle these
295 $wgActionPaths = array();
299 /************************************************************************//**
300 * @name Files and file uploads
304 /** Uploads have to be specially set up to be secure */
305 $wgEnableUploads = false;
308 * The maximum age of temporary (incomplete) uploaded files
310 $wgUploadStashMaxAge = 6 * 3600; // 6 hours
312 /** Allows to move images and other media files */
313 $wgAllowImageMoving = true;
316 * These are additional characters that should be replaced with '-' in filenames
318 $wgIllegalFileChars = ":";
321 * @deprecated since 1.17 use $wgDeletedDirectory
323 $wgFileStore = array();
326 * What directory to place deleted uploads in.
327 * Defaults to "{$wgUploadDirectory}/deleted".
329 $wgDeletedDirectory = false;
332 * Set this to true if you use img_auth and want the user to see details on why access failed.
334 $wgImgAuthDetails = false;
337 * If this is enabled, img_auth.php will not allow image access unless the wiki
338 * is private. This improves security when image uploads are hosted on a
341 $wgImgAuthPublicTest = true;
344 * File repository structures
346 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
347 * an array of such structures. Each repository structure is an associative
348 * array of properties configuring the repository.
350 * Properties required for all repos:
351 * - class The class name for the repository. May come from the core or an extension.
352 * The core repository classes are FileRepo, LocalRepo, ForeignDBRepo.
353 * FSRepo is also supported for backwards compatibility.
355 * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
356 * The name should consist of alpha-numberic characters.
357 * - backend A file backend name (see $wgFileBackends).
359 * For most core repos:
360 * - zones Associative array of zone names that each map to an array with:
361 * container : backend container name the zone is in
362 * directory : root path within container for the zone
363 * url : base URL to the root of the zone
364 * urlsByExt : map of file extension types to base URLs
365 * (useful for using a different cache for videos)
366 * handlerUrl : base script-handled URL to the root of the zone
367 * (see FileRepo::getZoneHandlerUrl() function)
368 * Zones default to using "<repo name>-<zone name>" as the container name
369 * and default to using the container root as the zone's root directory.
370 * Nesting of zone locations within other zones should be avoided.
371 * - url Public zone URL. The 'zones' settings take precedence.
372 * - hashLevels The number of directory levels for hash-based division of files
373 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
374 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
376 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
377 * determines whether filenames implicitly start with a capital letter.
378 * The current implementation may give incorrect description page links
379 * when the local $wgCapitalLinks and initialCapital are mismatched.
380 * - pathDisclosureProtection
381 * May be 'paranoid' to remove all parameters from error messages, 'none' to
382 * leave the paths in unchanged, or 'simple' to replace paths with
383 * placeholders. Default for LocalRepo is 'simple'.
384 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
386 * - directory The local filesystem directory where public files are stored. Not used for
388 * - thumbDir The base thumbnail directory. Defaults to "<directory>/thumb".
389 * - thumbUrl The base thumbnail URL. Defaults to "<url>/thumb".
390 * - isPrivate Set this if measures should always be taken to keep the files private.
391 * One should not trust this to assure that the files are not web readable;
392 * the server configuration should be done manually depending on the backend.
394 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
395 * for local repositories:
396 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
397 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
398 * http://en.wikipedia.org/w
399 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
400 * $wgScriptExtension, e.g. .php5 defaults to .php
402 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
403 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
404 * $wgFetchCommonsDescriptions.
405 * - abbrvThreshold File names over this size will use the short form of thumbnail names.
406 * Short thumbnail names only have the width, parameters, and the extension.
409 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
410 * equivalent to the corresponding member of $wgDBservers
411 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
412 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
415 * - apibase Use for the foreign API's URL
416 * - apiThumbCacheExpiry How long to locally cache thumbs for
418 * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
419 * Otherwise, set $wgLocalFileRepo to a repository structure as described above.
420 * If you set $wgUseInstantCommons to true, it will add an entry for Commons.
421 * If you set $wgForeignFileRepos to an array of repostory structures, those will
422 * be searched after the local file repo.
423 * Otherwise, you will only have access to local media files.
425 * @see Setup.php for an example usage and default initialization.
427 $wgLocalFileRepo = false;
429 /** @see $wgLocalFileRepo */
430 $wgForeignFileRepos = array();
433 * Use Commons as a remote file repository. Essentially a wrapper, when this
434 * is enabled $wgForeignFileRepos will point at Commons with a set of default
437 $wgUseInstantCommons = false;
440 * File backend structure configuration.
441 * This is an array of file backend configuration arrays.
442 * Each backend configuration has the following parameters:
443 * - 'name' : A unique name for the backend
444 * - 'class' : The file backend class to use
445 * - 'wikiId' : A unique string that identifies the wiki (container prefix)
446 * - 'lockManager' : The name of a lock manager (see $wgLockManagers)
448 * Additional parameters are specific to the class used.
450 $wgFileBackends = array();
453 * Array of configuration arrays for each lock manager.
454 * Each backend configuration has the following parameters:
455 * - 'name' : A unique name for the lock manager
456 * - 'class' : The lock manger class to use
457 * Additional parameters are specific to the class used.
459 $wgLockManagers = array();
462 * Show EXIF data, on by default if available.
463 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
465 * @note FOR WINDOWS USERS:
466 * To enable EXIF functions, add the following lines to the "Windows
467 * extensions" section of php.ini:
469 * extension=extensions/php_mbstring.dll
470 * extension=extensions/php_exif.dll
473 $wgShowEXIF = function_exists( 'exif_read_data' );
476 * If to automatically update the img_metadata field
477 * if the metadata field is outdated but compatible with the current version.
480 $wgUpdateCompatibleMetadata = false;
483 * If you operate multiple wikis, you can define a shared upload path here.
484 * Uploads to this wiki will NOT be put there - they will be put into
485 * $wgUploadDirectory.
486 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
487 * no file of the given name is found in the local repository (for [[File:..]],
488 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
491 * Note that these configuration settings can now be defined on a per-
492 * repository basis for an arbitrary number of file repositories, using the
493 * $wgForeignFileRepos variable.
495 $wgUseSharedUploads = false;
497 /** Full path on the web server where shared uploads can be found */
498 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
500 /** Fetch commons image description pages and display them on the local wiki? */
501 $wgFetchCommonsDescriptions = false;
503 /** Path on the file system where shared uploads can be found. */
504 $wgSharedUploadDirectory = "/var/www/wiki3/images";
506 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
507 $wgSharedUploadDBname = false;
509 /** Optional table prefix used in database. */
510 $wgSharedUploadDBprefix = '';
512 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
513 $wgCacheSharedUploads = true;
516 * Allow for upload to be copied from an URL.
517 * The timeout for copy uploads is set by $wgHTTPTimeout.
518 * You have to assign the user right 'upload_by_url' to a user group, to use this.
520 $wgAllowCopyUploads = false;
523 * Allow asynchronous copy uploads.
524 * This feature is experimental and broken as of r81612.
526 $wgAllowAsyncCopyUploads = false;
529 * A list of domains copy uploads can come from
533 $wgCopyUploadsDomains = array();
536 * Enable copy uploads from Special:Upload. $wgAllowCopyUploads must also be
537 * true. If $wgAllowCopyUploads is true, but this is false, you will only be
538 * able to perform copy uploads from the API or extensions (e.g. UploadWizard).
540 $wgCopyUploadsFromSpecialUpload = false;
543 * Proxy to use for copy upload requests.
546 $wgCopyUploadProxy = false;
549 * Max size for uploads, in bytes. If not set to an array, applies to all
550 * uploads. If set to an array, per upload type maximums can be set, using the
551 * file and url keys. If the * key is set this value will be used as maximum
552 * for non-specified types.
556 * $wgMaxUploadSize = array(
558 * 'url' => 500 * 1024,
561 * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
562 * will have a maximum of 500 kB.
565 $wgMaxUploadSize = 1024*1024*100; # 100MB
568 * Point the upload navigation link to an external URL
569 * Useful if you want to use a shared repository by default
570 * without disabling local uploads (use $wgEnableUploads = false for that).
574 * $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
577 $wgUploadNavigationUrl = false;
580 * Point the upload link for missing files to an external URL, as with
581 * $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=<filename>"
582 * appended to it as appropriate.
584 $wgUploadMissingFileUrl = false;
587 * Give a path here to use thumb.php for thumbnail generation on client
588 * request, instead of generating them on render and outputting a static URL.
589 * This is necessary if some of your apache servers don't have read/write
590 * access to the thumbnail path.
594 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
597 $wgThumbnailScriptPath = false;
599 * @see $wgThumbnailScriptPath
601 $wgSharedThumbnailScriptPath = false;
604 * Set this to false if you do not want MediaWiki to divide your images
605 * directory into many subdirectories, for improved performance.
607 * It's almost always good to leave this enabled. In previous versions of
608 * MediaWiki, some users set this to false to allow images to be added to the
609 * wiki by simply copying them into $wgUploadDirectory and then running
610 * maintenance/rebuildImages.php to register them in the database. This is no
611 * longer recommended, use maintenance/importImages.php instead.
613 * @note That this variable may be ignored if $wgLocalFileRepo is set.
614 * @todo Deprecate the setting and ultimately remove it from Core.
616 $wgHashedUploadDirectory = true;
619 * Set the following to false especially if you have a set of files that need to
620 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
623 $wgHashedSharedUploadDirectory = true;
626 * Base URL for a repository wiki. Leave this blank if uploads are just stored
627 * in a shared directory and not meant to be accessible through a separate wiki.
628 * Otherwise the image description pages on the local wiki will link to the
629 * image description page on this wiki.
631 * Please specify the namespace, as in the example below.
633 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
636 * This is the list of preferred extensions for uploading files. Uploading files
637 * with extensions not in this list will trigger a warning.
639 * @warning If you add any OpenOffice or Microsoft Office file formats here,
640 * such as odt or doc, and untrusted users are allowed to upload files, then
641 * your wiki will be vulnerable to cross-site request forgery (CSRF).
643 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
646 * Files with these extensions will never be allowed as uploads.
647 * An array of file extensions to blacklist. You should append to this array
648 * if you want to blacklist additional files.
650 $wgFileBlacklist = array(
651 # HTML may contain cookie-stealing JavaScript and web bugs
652 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
653 # PHP scripts may execute arbitrary code on the server
654 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
655 # Other types that may be interpreted by some servers
656 'shtml', 'jhtml', 'pl', 'py', 'cgi',
657 # May contain harmful executables for Windows victims
658 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
661 * Files with these mime types will never be allowed as uploads
662 * if $wgVerifyMimeType is enabled.
664 $wgMimeTypeBlacklist = array(
665 # HTML may contain cookie-stealing JavaScript and web bugs
666 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
667 # PHP scripts may execute arbitrary code on the server
668 'application/x-php', 'text/x-php',
669 # Other types that may be interpreted by some servers
670 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
671 # Client-side hazards on Internet Explorer
672 'text/scriptlet', 'application/x-msdownload',
673 # Windows metafile, client-side vulnerability on some systems
674 'application/x-msmetafile',
678 * Allow Java archive uploads.
679 * This is not recommended for public wikis since a maliciously-constructed
680 * applet running on the same domain as the wiki can steal the user's cookies.
682 $wgAllowJavaUploads = false;
685 * This is a flag to determine whether or not to check file extensions on upload.
687 * @warning Setting this to false is insecure for public wikis.
689 $wgCheckFileExtensions = true;
692 * If this is turned off, users may override the warning for files not covered
693 * by $wgFileExtensions.
695 * @warning Setting this to false is insecure for public wikis.
697 $wgStrictFileExtensions = true;
700 * Setting this to true will disable the upload system's checks for HTML/JavaScript.
702 * @warning THIS IS VERY DANGEROUS on a publicly editable site, so USE
703 * $wgGroupPermissions TO RESTRICT UPLOADING to only those that you trust
705 $wgDisableUploadScriptChecks = false;
708 * Warn if uploaded files are larger than this (in bytes), or false to disable
710 $wgUploadSizeWarning = false;
713 * list of trusted media-types and mime types.
714 * Use the MEDIATYPE_xxx constants to represent media types.
715 * This list is used by File::isSafeFile
717 * Types not listed here will have a warning about unsafe content
718 * displayed on the images description page. It would also be possible
719 * to use this for further restrictions, like disabling direct
720 * [[media:...]] links for non-trusted formats.
722 $wgTrustedMediaFormats = array(
723 MEDIATYPE_BITMAP
, //all bitmap formats
724 MEDIATYPE_AUDIO
, //all audio formats
725 MEDIATYPE_VIDEO
, //all plain video formats
726 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
727 "application/pdf", //PDF files
728 #"application/x-shockwave-flash", //flash/shockwave movie
732 * Plugins for media file type handling.
733 * Each entry in the array maps a MIME type to a class name
735 $wgMediaHandlers = array(
736 'image/jpeg' => 'JpegHandler',
737 'image/png' => 'PNGHandler',
738 'image/gif' => 'GIFHandler',
739 'image/tiff' => 'TiffHandler',
740 'image/x-ms-bmp' => 'BmpHandler',
741 'image/x-bmp' => 'BmpHandler',
742 'image/x-xcf' => 'XCFHandler',
743 'image/svg+xml' => 'SvgHandler', // official
744 'image/svg' => 'SvgHandler', // compat
745 'image/vnd.djvu' => 'DjVuHandler', // official
746 'image/x.djvu' => 'DjVuHandler', // compat
747 'image/x-djvu' => 'DjVuHandler', // compat
751 * Plugins for page content model handling.
752 * Each entry in the array maps a model id to a class name.
756 $wgContentHandlers = array(
758 CONTENT_MODEL_WIKITEXT
=> 'WikitextContentHandler',
759 // dumb version, no syntax highlighting
760 CONTENT_MODEL_JAVASCRIPT
=> 'JavaScriptContentHandler',
761 // dumb version, no syntax highlighting
762 CONTENT_MODEL_CSS
=> 'CssContentHandler',
763 // plain text, for use by extensions etc
764 CONTENT_MODEL_TEXT
=> 'TextContentHandler',
768 * Resizing can be done using PHP's internal image libraries or using
769 * ImageMagick or another third-party converter, e.g. GraphicMagick.
770 * These support more file formats than PHP, which only supports PNG,
771 * GIF, JPG, XBM and WBMP.
773 * Use Image Magick instead of PHP builtin functions.
775 $wgUseImageMagick = false;
776 /** The convert command shipped with ImageMagick */
777 $wgImageMagickConvertCommand = '/usr/bin/convert';
778 /** The identify command shipped with ImageMagick */
779 $wgImageMagickIdentifyCommand = '/usr/bin/identify';
781 /** Sharpening parameter to ImageMagick */
782 $wgSharpenParameter = '0x0.4';
784 /** Reduction in linear dimensions below which sharpening will be enabled */
785 $wgSharpenReductionThreshold = 0.85;
788 * Temporary directory used for ImageMagick. The directory must exist. Leave
789 * this set to false to let ImageMagick decide for itself.
791 $wgImageMagickTempDir = false;
794 * Use another resizing converter, e.g. GraphicMagick
795 * %s will be replaced with the source path, %d with the destination
796 * %w and %h will be replaced with the width and height.
798 * @par Example for GraphicMagick:
800 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
803 * Leave as false to skip this.
805 $wgCustomConvertCommand = false;
808 * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some
811 $wgExiv2Command = '/usr/bin/exiv2';
814 * Scalable Vector Graphics (SVG) may be uploaded as images.
815 * Since SVG support is not yet standard in browsers, it is
816 * necessary to rasterize SVGs to PNG as a fallback format.
818 * An external program is required to perform this conversion.
819 * If set to an array, the first item is a PHP callable and any further items
820 * are passed as parameters after $srcPath, $dstPath, $width, $height
822 $wgSVGConverters = array(
823 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
824 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
825 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
826 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
827 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
828 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
829 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
832 /** Pick a converter defined in $wgSVGConverters */
833 $wgSVGConverter = 'ImageMagick';
835 /** If not in the executable PATH, specify the SVG converter path. */
836 $wgSVGConverterPath = '';
838 /** Don't scale a SVG larger than this */
839 $wgSVGMaxSize = 2048;
841 /** Don't read SVG metadata beyond this point.
842 * Default is 1024*256 bytes
844 $wgSVGMetadataCutoff = 262144;
847 * Disallow <title> element in SVG files.
849 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic
850 * browsers which can not perform basic stuff like MIME detection and which are
851 * vulnerable to further idiots uploading crap files as images.
853 * When this directive is on, "<title>" will be allowed in files with an
854 * "image/svg+xml" MIME type. You should leave this disabled if your web server
855 * is misconfigured and doesn't send appropriate MIME types for SVG images.
857 $wgAllowTitlesInSVG = false;
860 * The maximum number of pixels a source image can have if it is to be scaled
861 * down by a scaler that requires the full source image to be decompressed
862 * and stored in decompressed form, before the thumbnail is generated.
864 * This provides a limit on memory usage for the decompression side of the
865 * image scaler. The limit is used when scaling PNGs with any of the
866 * built-in image scalers, such as ImageMagick or GD. It is ignored for
867 * JPEGs with ImageMagick, and when using the VipsScaler extension.
869 * The default is 50 MB if decompressed to RGBA form, which corresponds to
870 * 12.5 million pixels or 3500x3500.
872 $wgMaxImageArea = 1.25e7
;
874 * Force thumbnailing of animated GIFs above this size to a single
875 * frame instead of an animated thumbnail. As of MW 1.17 this limit
876 * is checked against the total size of all frames in the animation.
877 * It probably makes sense to keep this equal to $wgMaxImageArea.
879 $wgMaxAnimatedGifArea = 1.25e7
;
881 * Browsers don't support TIFF inline generally...
882 * For inline display, we need to convert to PNG or JPEG.
883 * Note scaling should work with ImageMagick, but may not with GD scaling.
887 * // PNG is lossless, but inefficient for photos
888 * $wgTiffThumbnailType = array( 'png', 'image/png' );
889 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
890 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
893 $wgTiffThumbnailType = false;
896 * If rendered thumbnail files are older than this timestamp, they
897 * will be rerendered on demand as if the file didn't already exist.
898 * Update if there is some need to force thumbs and SVG rasterizations
899 * to rerender, such as fixes to rendering bugs.
901 $wgThumbnailEpoch = '20030516000000';
904 * If set, inline scaled images will still produce "<img>" tags ready for
905 * output instead of showing an error message.
907 * This may be useful if errors are transitory, especially if the site
908 * is configured to automatically render thumbnails on request.
910 * On the other hand, it may obscure error conditions from debugging.
911 * Enable the debug log or the 'thumbnail' log group to make sure errors
912 * are logged to a file for review.
914 $wgIgnoreImageErrors = false;
917 * Allow thumbnail rendering on page view. If this is false, a valid
918 * thumbnail URL is still output, but no file will be created at
919 * the target location. This may save some time if you have a
920 * thumb.php or 404 handler set up which is faster than the regular
923 $wgGenerateThumbnailOnParse = true;
926 * Show thumbnails for old images on the image description page
928 $wgShowArchiveThumbnails = true;
930 /** Obsolete, always true, kept for compatibility with extensions */
931 $wgUseImageResize = true;
934 * If set to true, images that contain certain the exif orientation tag will
935 * be rotated accordingly. If set to null, try to auto-detect whether a scaler
936 * is available that can rotate.
938 $wgEnableAutoRotation = null;
941 * Internal name of virus scanner. This servers as a key to the
942 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
943 * null, every file uploaded will be scanned for viruses.
948 * Configuration for different virus scanners. This an associative array of
949 * associative arrays. It contains one setup array per known scanner type.
950 * The entry is selected by $wgAntivirus, i.e.
951 * valid values for $wgAntivirus are the keys defined in this array.
953 * The configuration array for each scanner contains the following keys:
954 * "command", "codemap", "messagepattern":
956 * "command" is the full command to call the virus scanner - %f will be
957 * replaced with the name of the file to scan. If not present, the filename
958 * will be appended to the command. Note that this must be overwritten if the
959 * scanner is not in the system path; in that case, plase set
960 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
963 * "codemap" is a mapping of exit code to return codes of the detectVirus
964 * function in SpecialUpload.
965 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
966 * the scan to be failed. This will pass the file if $wgAntivirusRequired
968 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
969 * the file to have an usupported format, which is probably imune to
970 * virusses. This causes the file to pass.
971 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
972 * no virus was found.
973 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
975 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
977 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
978 * output. The relevant part should be matched as group one (\1).
979 * If not defined or the pattern does not match, the full message is shown to the user.
981 $wgAntivirusSetup = array(
985 'command' => "clamscan --no-summary ",
988 "0" => AV_NO_VIRUS
, # no virus
989 "1" => AV_VIRUS_FOUND
, # virus found
990 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
991 "*" => AV_SCAN_FAILED
, # else scan failed
994 'messagepattern' => '/.*?:(.*)/sim',
999 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
1000 $wgAntivirusRequired = true;
1002 /** Determines if the mime type of uploaded files should be checked */
1003 $wgVerifyMimeType = true;
1005 /** Sets the mime type definition file to use by MimeMagic.php. */
1006 $wgMimeTypeFile = "includes/mime.types";
1007 #$wgMimeTypeFile= "/etc/mime.types";
1008 #$wgMimeTypeFile= null; #use built-in defaults only.
1010 /** Sets the mime type info file to use by MimeMagic.php. */
1011 $wgMimeInfoFile= "includes/mime.info";
1012 #$wgMimeInfoFile= null; #use built-in defaults only.
1015 * Switch for loading the FileInfo extension by PECL at runtime.
1016 * This should be used only if fileinfo is installed as a shared object
1017 * or a dynamic library.
1019 $wgLoadFileinfoExtension = false;
1021 /** Sets an external mime detector program. The command must print only
1022 * the mime type to standard output.
1023 * The name of the file to process will be appended to the command given here.
1024 * If not set or NULL, mime_content_type will be used if available.
1028 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
1031 $wgMimeDetectorCommand = null;
1034 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
1035 * things, because only a few types of images are needed and file extensions
1038 $wgTrivialMimeDetection = false;
1041 * Additional XML types we can allow via mime-detection.
1042 * array = ( 'rootElement' => 'associatedMimeType' )
1044 $wgXMLMimeTypes = array(
1045 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
1046 'svg' => 'image/svg+xml',
1047 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
1048 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
1049 'html' => 'text/html', // application/xhtml+xml?
1053 * Limit images on image description pages to a user-selectable limit. In order
1054 * to reduce disk usage, limits can only be selected from a list.
1055 * The user preference is saved as an array offset in the database, by default
1056 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
1057 * change it if you alter the array (see bug 8858).
1058 * This is the list of settings the user can choose from:
1060 $wgImageLimits = array(
1069 * Adjust thumbnails on image pages according to a user setting. In order to
1070 * reduce disk usage, the values can only be selected from a list. This is the
1071 * list of settings the user can choose from:
1073 $wgThumbLimits = array(
1083 * Default parameters for the "<gallery>" tag
1085 $wgGalleryOptions = array (
1086 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
1087 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
1088 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
1089 'captionLength' => 25, // Length of caption to truncate (in characters)
1090 'showBytes' => true, // Show the filesize in bytes in categories
1094 * Adjust width of upright images when parameter 'upright' is used
1095 * This allows a nicer look for upright images without the need to fix the width
1096 * by hardcoded px in wiki sourcecode.
1098 $wgThumbUpright = 0.75;
1101 * Default value for chmoding of new directories.
1103 $wgDirectoryMode = 0777;
1106 * Generate and use thumbnails suitable for screens with 1.5 and 2.0 pixel densities.
1108 * This means a 320x240 use of an image on the wiki will also generate 480x360 and 640x480
1109 * thumbnails, output via data-src-1-5 and data-src-2-0. Runtime JavaScript switches the
1110 * images in after loading the original low-resolution versions depending on the reported
1111 * window.devicePixelRatio.
1113 $wgResponsiveImages = true;
1116 * @name DJVU settings
1120 * Path of the djvudump executable
1121 * Enable this and $wgDjvuRenderer to enable djvu rendering
1123 # $wgDjvuDump = 'djvudump';
1127 * Path of the ddjvu DJVU renderer
1128 * Enable this and $wgDjvuDump to enable djvu rendering
1130 # $wgDjvuRenderer = 'ddjvu';
1131 $wgDjvuRenderer = null;
1134 * Path of the djvutxt DJVU text extraction utility
1135 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
1137 # $wgDjvuTxt = 'djvutxt';
1141 * Path of the djvutoxml executable
1142 * This works like djvudump except much, much slower as of version 3.5.
1144 * For now we recommend you use djvudump instead. The djvuxml output is
1145 * probably more stable, so we'll switch back to it as soon as they fix
1146 * the efficiency problem.
1147 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
1151 * $wgDjvuToXML = 'djvutoxml';
1154 $wgDjvuToXML = null;
1157 * Shell command for the DJVU post processor
1158 * Default: pnmtopng, since ddjvu generates ppm output
1159 * Set this to false to output the ppm file directly.
1161 $wgDjvuPostProcessor = 'pnmtojpeg';
1163 * File extension for the DJVU post processor output
1165 $wgDjvuOutputExtension = 'jpg';
1166 /** @} */ # end of DJvu }
1168 /** @} */ # end of file uploads }
1170 /************************************************************************//**
1171 * @name Email settings
1175 $serverName = substr( $wgServer, strrpos( $wgServer, '/' ) +
1 );
1178 * Site admin email address.
1180 $wgEmergencyContact = 'wikiadmin@' . $serverName;
1183 * Password reminder email address.
1185 * The address we should use as sender when a user is requesting his password.
1187 $wgPasswordSender = 'apache@' . $serverName;
1189 unset( $serverName ); # Don't leak local variables to global scope
1192 * Password reminder name
1194 $wgPasswordSenderName = 'MediaWiki Mail';
1197 * Dummy address which should be accepted during mail send action.
1198 * It might be necessary to adapt the address or to set it equal
1199 * to the $wgEmergencyContact address.
1201 $wgNoReplyAddress = 'reply@not.possible';
1204 * Set to true to enable the e-mail basic features:
1205 * Password reminders, etc. If sending e-mail on your
1206 * server doesn't work, you might want to disable this.
1208 $wgEnableEmail = true;
1211 * Set to true to enable user-to-user e-mail.
1212 * This can potentially be abused, as it's hard to track.
1214 $wgEnableUserEmail = true;
1217 * Set to true to put the sending user's email in a Reply-To header
1218 * instead of From. ($wgEmergencyContact will be used as From.)
1220 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1221 * which can cause problems with SPF validation and leak recipient addressses
1222 * when bounces are sent to the sender.
1224 $wgUserEmailUseReplyTo = false;
1227 * Minimum time, in hours, which must elapse between password reminder
1228 * emails for a given account. This is to prevent abuse by mail flooding.
1230 $wgPasswordReminderResendTime = 24;
1233 * The time, in seconds, when an emailed temporary password expires.
1235 $wgNewPasswordExpiry = 3600 * 24 * 7;
1238 * The time, in seconds, when an email confirmation email expires
1240 $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
1245 * For using a direct (authenticated) SMTP server connection.
1246 * Default to false or fill an array :
1250 * 'host' => 'SMTP domain',
1251 * 'IDHost' => 'domain for MessageID',
1253 * 'auth' => [true|false],
1254 * 'username' => [SMTP username],
1255 * 'password' => [SMTP password],
1262 * Additional email parameters, will be passed as the last argument to mail() call.
1263 * If using safe_mode this has no effect
1265 $wgAdditionalMailParams = null;
1268 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1269 * from $wgEmergencyContact
1271 $wgEnotifFromEditor = false;
1273 // TODO move UPO to preferences probably ?
1274 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1275 # If set to false, the corresponding input form on the user preference page is suppressed
1276 # It call this to be a "user-preferences-option (UPO)"
1279 * Require email authentication before sending mail to an email address.
1280 * This is highly recommended. It prevents MediaWiki from being used as an open
1283 $wgEmailAuthentication = true;
1286 * Allow users to enable email notification ("enotif") on watchlist changes.
1288 $wgEnotifWatchlist = false;
1291 * Allow users to enable email notification ("enotif") when someone edits their
1294 $wgEnotifUserTalk = false;
1297 * Set the Reply-to address in notifications to the editor's address, if user
1298 * allowed this in the preferences.
1300 $wgEnotifRevealEditorAddress = false;
1303 * Send notification mails on minor edits to watchlist pages. This is enabled
1304 * by default. Does not affect user talk notifications.
1306 $wgEnotifMinorEdits = true;
1309 * Send a generic mail instead of a personalised mail for each user. This
1310 * always uses UTC as the time zone, and doesn't include the username.
1312 * For pages with many users watching, this can significantly reduce mail load.
1313 * Has no effect when using sendmail rather than SMTP.
1315 $wgEnotifImpersonal = false;
1318 * Maximum number of users to mail at once when using impersonal mail. Should
1319 * match the limit on your mail server.
1321 $wgEnotifMaxRecips = 500;
1324 * Send mails via the job queue. This can be useful to reduce the time it
1325 * takes to save a page that a lot of people are watching.
1327 $wgEnotifUseJobQ = false;
1330 * Use real name instead of username in e-mail "from" field.
1332 $wgEnotifUseRealName = false;
1335 * Array of usernames who will be sent a notification email for every change
1336 * which occurs on a wiki. Users will not be notified of their own changes.
1338 $wgUsersNotifiedOnAllChanges = array();
1341 /** @} */ # end of email settings
1343 /************************************************************************//**
1344 * @name Database settings
1347 /** Database host name or IP address */
1348 $wgDBserver = 'localhost';
1349 /** Database port number (for PostgreSQL) */
1351 /** Name of the database */
1352 $wgDBname = 'my_wiki';
1353 /** Database username */
1354 $wgDBuser = 'wikiuser';
1355 /** Database user's password */
1357 /** Database type */
1358 $wgDBtype = 'mysql';
1359 /** Whether to use SSL in DB connection. */
1361 /** Whether to use compression in DB connection. */
1362 $wgDBcompress = false;
1364 /** Separate username for maintenance tasks. Leave as null to use the default. */
1365 $wgDBadminuser = null;
1366 /** Separate password for maintenance tasks. Leave as null to use the default. */
1367 $wgDBadminpassword = null;
1371 * Leave as null to select the default search engine for the
1372 * selected database type (eg SearchMySQL), or set to a class
1373 * name to override to a custom search engine.
1375 $wgSearchType = null;
1377 /** Table name prefix */
1379 /** MySQL table options to use during installation or update */
1380 $wgDBTableOptions = 'ENGINE=InnoDB';
1383 * SQL Mode - default is turning off all modes, including strict, if set.
1384 * null can be used to skip the setting for performance reasons and assume
1385 * DBA has done his best job.
1386 * String override can be used for some additional fun :-)
1390 /** Mediawiki schema */
1391 $wgDBmwschema = 'mediawiki';
1393 /** To override default SQLite data directory ($docroot/../data) */
1394 $wgSQLiteDataDir = '';
1397 * Make all database connections secretly go to localhost. Fool the load balancer
1398 * thinking there is an arbitrarily large cluster of servers to connect to.
1399 * Useful for debugging.
1401 $wgAllDBsAreLocalhost = false;
1404 * Shared database for multiple wikis. Commonly used for storing a user table
1405 * for single sign-on. The server for this database must be the same as for the
1408 * For backwards compatibility the shared prefix is set to the same as the local
1409 * prefix, and the user table is listed in the default list of shared tables.
1410 * The user_properties table is also added so that users will continue to have their
1411 * preferences shared (preferences were stored in the user table prior to 1.16)
1413 * $wgSharedTables may be customized with a list of tables to share in the shared
1414 * datbase. However it is advised to limit what tables you do share as many of
1415 * MediaWiki's tables may have side effects if you try to share them.
1417 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1420 * @deprecated In new code, use the $wiki parameter to wfGetLB() to access
1421 * remote databases. Using wfGetLB() allows the shared database to reside on
1422 * separate servers to the wiki's own database, with suitable configuration
1423 * of $wgLBFactoryConf.
1427 /** @see $wgSharedDB */
1428 $wgSharedPrefix = false;
1429 /** @see $wgSharedDB */
1430 $wgSharedTables = array( 'user', 'user_properties' );
1433 * Database load balancer
1434 * This is a two-dimensional array, an array of server info structures
1437 * - dbname: Default database name
1439 * - password: DB password
1440 * - type: "mysql" or "postgres"
1441 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1442 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1443 * to several groups, the most specific group defined here is used.
1445 * - flags: bit field
1446 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1447 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1448 * - DBO_TRX -- wrap entire request in a transaction
1449 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1450 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1451 * - DBO_PERSISTENT -- enables persistent database connections
1452 * - DBO_SSL -- uses SSL/TLS encryption in database connections, if available
1453 * - DBO_COMPRESS -- uses internal compression in database connections, if available
1455 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1456 * - max threads: (optional) Maximum number of running threads
1458 * These and any other user-defined properties will be assigned to the mLBInfo member
1459 * variable of the Database object.
1461 * Leave at false to use the single-server variables above. If you set this
1462 * variable, the single-server variables will generally be ignored (except
1463 * perhaps in some command-line scripts).
1465 * The first server listed in this array (with key 0) will be the master. The
1466 * rest of the servers will be slaves. To prevent writes to your slaves due to
1467 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1468 * slaves in my.cnf. You can set read_only mode at runtime using:
1471 * SET @@read_only=1;
1474 * Since the effect of writing to a slave is so damaging and difficult to clean
1475 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1476 * our masters, and then set read_only=0 on masters at runtime.
1478 $wgDBservers = false;
1481 * Load balancer factory configuration
1482 * To set up a multi-master wiki farm, set the class here to something that
1483 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1484 * The class identified here is responsible for reading $wgDBservers,
1485 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1487 * The LBFactory_Multi class is provided for this purpose, please see
1488 * includes/db/LBFactory_Multi.php for configuration information.
1490 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1492 /** How long to wait for a slave to catch up to the master */
1493 $wgMasterWaitTimeout = 10;
1495 /** File to log database errors to */
1496 $wgDBerrorLog = false;
1499 * Timezone to use in the error log.
1500 * Defaults to the wiki timezone ($wgLocaltimezone).
1502 * A list of useable timezones can found at:
1503 * http://php.net/manual/en/timezones.php
1507 * $wgLocaltimezone = 'UTC';
1508 * $wgLocaltimezone = 'GMT';
1509 * $wgLocaltimezone = 'PST8PDT';
1510 * $wgLocaltimezone = 'Europe/Sweden';
1511 * $wgLocaltimezone = 'CET';
1516 $wgDBerrorLogTZ = false;
1518 /** When to give an error message */
1519 $wgDBClusterTimeout = 10;
1522 * Scale load balancer polling time so that under overload conditions, the
1523 * database server receives a SHOW STATUS query at an average interval of this
1526 $wgDBAvgStatusPoll = 2000;
1529 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1530 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1532 * @warning THIS IS EXPERIMENTAL!
1534 * May break if you're not using the table defs from mysql5/tables.sql.
1535 * May break if you're upgrading an existing wiki if set differently.
1536 * Broken symptoms likely to include incorrect behavior with page titles,
1537 * usernames, comments etc containing non-ASCII characters.
1538 * Might also cause failures on the object cache and other things.
1540 * Even correct usage may cause failures with Unicode supplementary
1541 * characters (those not in the Basic Multilingual Plane) unless MySQL
1542 * has enhanced their Unicode support.
1544 $wgDBmysql5 = false;
1547 * Other wikis on this site, can be administered from a single developer
1549 * Array numeric key => database name
1551 $wgLocalDatabases = array();
1554 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1555 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1556 * show a more obvious warning.
1558 $wgSlaveLagWarning = 10;
1559 /** @see $wgSlaveLagWarning */
1560 $wgSlaveLagCritical = 30;
1563 * Use old names for change_tags indices.
1565 $wgOldChangeTagsIndex = false;
1567 /**@}*/ # End of DB settings }
1570 /************************************************************************//**
1571 * @name Text storage
1576 * We can also compress text stored in the 'text' table. If this is set on, new
1577 * revisions will be compressed on page save if zlib support is available. Any
1578 * compressed revisions will be decompressed on load regardless of this setting
1579 * *but will not be readable at all* if zlib support is not available.
1581 $wgCompressRevisions = false;
1584 * External stores allow including content
1585 * from non database sources following URL links.
1587 * Short names of ExternalStore classes may be specified in an array here:
1589 * $wgExternalStores = array("http","file","custom")...
1592 * CAUTION: Access to database might lead to code execution
1594 $wgExternalStores = false;
1597 * An array of external MySQL servers.
1600 * Create a cluster named 'cluster1' containing three servers:
1602 * $wgExternalServers = array(
1603 * 'cluster1' => array( 'srv28', 'srv29', 'srv30' )
1607 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to
1610 $wgExternalServers = array();
1613 * The place to put new revisions, false to put them in the local text table.
1614 * Part of a URL, e.g. DB://cluster1
1616 * Can be an array instead of a single string, to enable data distribution. Keys
1617 * must be consecutive integers, starting at zero.
1621 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1626 $wgDefaultExternalStore = false;
1629 * Revision text may be cached in $wgMemc to reduce load on external storage
1630 * servers and object extraction overhead for frequently-loaded revisions.
1632 * Set to 0 to disable, or number of seconds before cache expiry.
1634 $wgRevisionCacheExpiry = 0;
1636 /** @} */ # end text storage }
1638 /************************************************************************//**
1639 * @name Performance hacks and limits
1642 /** Disable database-intensive features */
1643 $wgMiserMode = false;
1644 /** Disable all query pages if miser mode is on, not just some */
1645 $wgDisableQueryPages = false;
1646 /** Number of rows to cache in 'querycache' table when miser mode is on */
1647 $wgQueryCacheLimit = 1000;
1648 /** Number of links to a page required before it is deemed "wanted" */
1649 $wgWantedPagesThreshold = 1;
1650 /** Enable slow parser functions */
1651 $wgAllowSlowParserFunctions = false;
1652 /** Allow schema updates */
1653 $wgAllowSchemaUpdates = true;
1656 * Do DELETE/INSERT for link updates instead of incremental
1658 $wgUseDumbLinkUpdate = false;
1661 * Anti-lock flags - bitfield
1662 * - ALF_NO_LINK_LOCK:
1663 * Don't use locking reads when updating the link table. This is
1664 * necessary for wikis with a high edit rate for performance
1665 * reasons, but may cause link table inconsistency
1667 $wgAntiLockFlags = 0;
1670 * Maximum article size in kilobytes
1672 $wgMaxArticleSize = 2048;
1675 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1676 * raise PHP's memory limit if it's below this amount.
1678 $wgMemoryLimit = "50M";
1680 /** @} */ # end performance hacks }
1682 /************************************************************************//**
1683 * @name Cache settings
1688 * Directory for caching data in the local filesystem. Should not be accessible
1689 * from the web. Set this to false to not use any local caches.
1691 * Note: if multiple wikis share the same localisation cache directory, they
1692 * must all have the same set of extensions. You can set a directory just for
1693 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1695 $wgCacheDirectory = false;
1698 * Main cache type. This should be a cache with fast access, but it may have
1699 * limited space. By default, it is disabled, since the database is not fast
1700 * enough to make it worthwhile.
1704 * - CACHE_ANYTHING: Use anything, as long as it works
1705 * - CACHE_NONE: Do not cache
1706 * - CACHE_DB: Store cache objects in the DB
1707 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
1708 * - CACHE_ACCEL: APC, XCache or WinCache
1709 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1710 * database. This is slow, and is not recommended for
1711 * anything other than debugging.
1712 * - (other): A string may be used which identifies a cache
1713 * configuration in $wgObjectCaches.
1715 * @see $wgMessageCacheType, $wgParserCacheType
1717 $wgMainCacheType = CACHE_NONE
;
1720 * The cache type for storing the contents of the MediaWiki namespace. This
1721 * cache is used for a small amount of data which is expensive to regenerate.
1723 * For available types see $wgMainCacheType.
1725 $wgMessageCacheType = CACHE_ANYTHING
;
1728 * The cache type for storing article HTML. This is used to store data which
1729 * is expensive to regenerate, and benefits from having plenty of storage space.
1731 * For available types see $wgMainCacheType.
1733 $wgParserCacheType = CACHE_ANYTHING
;
1736 * The cache type for storing session data. Used if $wgSessionsInObjectCache is true.
1738 * For available types see $wgMainCacheType.
1740 $wgSessionCacheType = CACHE_ANYTHING
;
1743 * The cache type for storing language conversion tables,
1744 * which are used when parsing certain text and interface messages.
1746 * For available types see $wgMainCacheType.
1750 $wgLanguageConverterCacheType = CACHE_ANYTHING
;
1753 * Advanced object cache configuration.
1755 * Use this to define the class names and constructor parameters which are used
1756 * for the various cache types. Custom cache types may be defined here and
1757 * referenced from $wgMainCacheType, $wgMessageCacheType, $wgParserCacheType,
1758 * or $wgLanguageConverterCacheType.
1760 * The format is an associative array where the key is a cache identifier, and
1761 * the value is an associative array of parameters. The "class" parameter is the
1762 * class name which will be used. Alternatively, a "factory" parameter may be
1763 * given, giving a callable function which will generate a suitable cache object.
1765 * The other parameters are dependent on the class used.
1766 * - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you
1769 $wgObjectCaches = array(
1770 CACHE_NONE
=> array( 'class' => 'EmptyBagOStuff' ),
1771 CACHE_DB
=> array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
1772 CACHE_DBA
=> array( 'class' => 'DBABagOStuff' ),
1774 CACHE_ANYTHING
=> array( 'factory' => 'ObjectCache::newAnything' ),
1775 CACHE_ACCEL
=> array( 'factory' => 'ObjectCache::newAccelerator' ),
1776 CACHE_MEMCACHED
=> array( 'factory' => 'ObjectCache::newMemcached' ),
1778 'apc' => array( 'class' => 'APCBagOStuff' ),
1779 'xcache' => array( 'class' => 'XCacheBagOStuff' ),
1780 'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
1781 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
1782 'memcached-pecl' => array( 'class' => 'MemcachedPeclBagOStuff' ),
1783 'hash' => array( 'class' => 'HashBagOStuff' ),
1787 * The expiry time for the parser cache, in seconds.
1788 * The default is 86400 (one day).
1790 $wgParserCacheExpireTime = 86400;
1793 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php>
1794 * to use as CACHE_DBA backend.
1796 $wgDBAhandler = 'db3';
1799 * Deprecated alias for $wgSessionsInObjectCache.
1801 * @deprecated since 1.20; Use $wgSessionsInObjectCache
1803 $wgSessionsInMemcached = false;
1806 * Store sessions in an object cache, configured by $wgSessionCacheType. This
1807 * can be useful to improve performance, or to avoid the locking behaviour of
1808 * PHP's default session handler, which tends to prevent multiple requests for
1809 * the same user from acting concurrently.
1811 $wgSessionsInObjectCache = false;
1814 * The expiry time to use for session storage when $wgSessionsInObjectCache is
1815 * enabled, in seconds.
1817 $wgObjectCacheSessionExpiry = 3600;
1820 * This is used for setting php's session.save_handler. In practice, you will
1821 * almost never need to change this ever. Other options might be 'user' or
1822 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1823 * useful if you're doing cross-application sessions, see bug 11381)
1825 $wgSessionHandler = null;
1827 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1828 $wgMemCachedDebug = false;
1830 /** The list of MemCached servers and port numbers */
1831 $wgMemCachedServers = array( '127.0.0.1:11000' );
1834 * Use persistent connections to MemCached, which are shared across multiple
1837 $wgMemCachedPersistent = false;
1840 * Read/write timeout for MemCached server communication, in microseconds.
1842 $wgMemCachedTimeout = 500000;
1845 * Set this to true to make a local copy of the message cache, for use in
1846 * addition to memcached. The files will be put in $wgCacheDirectory.
1848 $wgUseLocalMessageCache = false;
1851 * Defines format of local cache.
1852 * - true: Serialized object
1853 * - false: PHP source file (Warning - security risk)
1855 $wgLocalMessageCacheSerialized = true;
1858 * Instead of caching everything, only cache those messages which have
1859 * been customised in the site content language. This means that
1860 * MediaWiki:Foo/ja is ignored if MediaWiki:Foo doesn't exist.
1861 * This option is probably only useful for translatewiki.net.
1863 $wgAdaptiveMessageCache = false;
1866 * Localisation cache configuration. Associative array with keys:
1867 * class: The class to use. May be overridden by extensions.
1869 * store: The location to store cache data. May be 'files', 'db' or
1870 * 'detect'. If set to "files", data will be in CDB files. If set
1871 * to "db", data will be stored to the database. If set to
1872 * "detect", files will be used if $wgCacheDirectory is set,
1873 * otherwise the database will be used.
1875 * storeClass: The class name for the underlying storage. If set to a class
1876 * name, it overrides the "store" setting.
1878 * storeDirectory: If the store class puts its data in files, this is the
1879 * directory it will use. If this is false, $wgCacheDirectory
1882 * manualRecache: Set this to true to disable cache updates on web requests.
1883 * Use maintenance/rebuildLocalisationCache.php instead.
1885 $wgLocalisationCacheConf = array(
1886 'class' => 'LocalisationCache',
1887 'store' => 'detect',
1888 'storeClass' => false,
1889 'storeDirectory' => false,
1890 'manualRecache' => false,
1893 /** Allow client-side caching of pages */
1894 $wgCachePages = true;
1897 * Set this to current time to invalidate all prior cached pages. Affects both
1898 * client-side and server-side caching.
1899 * You can get the current date on your server by using the command:
1901 * date +%Y%m%d%H%M%S
1904 $wgCacheEpoch = '20030516000000';
1907 * Bump this number when changing the global style sheets and JavaScript.
1909 * It should be appended in the query string of static CSS and JS includes,
1910 * to ensure that client-side caches do not keep obsolete copies of global
1913 $wgStyleVersion = '303';
1916 * This will cache static pages for non-logged-in users to reduce
1917 * database traffic on public sites.
1918 * Must set $wgShowIPinHeader = false
1919 * ResourceLoader requests to default language and skins are cached
1920 * as well as single module requests.
1922 $wgUseFileCache = false;
1925 * Depth of the subdirectory hierarchy to be created under
1926 * $wgFileCacheDirectory. The subdirectories will be named based on
1927 * the MD5 hash of the title. A value of 0 means all cache files will
1928 * be put directly into the main file cache directory.
1930 $wgFileCacheDepth = 2;
1933 * Keep parsed pages in a cache (objectcache table or memcached)
1934 * to speed up output of the same page viewed by another user with the
1937 * This can provide a significant speedup for medium to large pages,
1938 * so you probably want to keep it on. Extensions that conflict with the
1939 * parser cache should disable the cache on a per-page basis instead.
1941 $wgEnableParserCache = true;
1944 * Append a configured value to the parser cache and the sitenotice key so
1945 * that they can be kept separate for some class of activity.
1947 $wgRenderHashAppend = '';
1950 * If on, the sidebar navigation links are cached for users with the
1951 * current language set. This can save a touch of load on a busy site
1952 * by shaving off extra message lookups.
1954 * However it is also fragile: changing the site configuration, or
1955 * having a variable $wgArticlePath, can produce broken links that
1956 * don't update as expected.
1958 $wgEnableSidebarCache = false;
1961 * Expiry time for the sidebar cache, in seconds
1963 $wgSidebarCacheExpiry = 86400;
1966 * When using the file cache, we can store the cached HTML gzipped to save disk
1967 * space. Pages will then also be served compressed to clients that support it.
1969 * Requires zlib support enabled in PHP.
1974 * Whether MediaWiki should send an ETag header. Seems to cause
1975 * broken behavior with Squid 2.6, see bug 7098.
1979 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1980 * problems when the user requests two pages within a short period of time. This
1981 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1984 $wgClockSkewFudge = 5;
1987 * Invalidate various caches when LocalSettings.php changes. This is equivalent
1988 * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
1989 * was previously done in the default LocalSettings.php file.
1991 * On high-traffic wikis, this should be set to false, to avoid the need to
1992 * check the file modification time, and to avoid the performance impact of
1993 * unnecessary cache invalidations.
1995 $wgInvalidateCacheOnLocalSettingsChange = true;
1997 /** @} */ # end of cache settings
1999 /************************************************************************//**
2000 * @name HTTP proxy (Squid) settings
2002 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
2003 * although they are referred to as Squid settings for historical reasons.
2005 * Achieving a high hit ratio with an HTTP proxy requires special
2006 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
2013 * Enable/disable Squid.
2014 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
2016 $wgUseSquid = false;
2018 /** If you run Squid3 with ESI support, enable this (default:false): */
2021 /** Send X-Vary-Options header for better caching (requires patched Squid) */
2024 /** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
2025 * requests and RSS/Atom feeds. Use this if you have an SSL termination setup
2026 * and need to split the cache between HTTP and HTTPS for API requests,
2027 * feed requests and HTTP redirect responses in order to prevent cache
2028 * pollution. This does not affect 'normal' requests to index.php other than
2031 $wgVaryOnXFP = false;
2034 * Internal server name as known to Squid, if different.
2038 * $wgInternalServer = 'http://yourinternal.tld:8000';
2041 $wgInternalServer = false;
2044 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
2045 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
2046 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
2049 $wgSquidMaxage = 18000;
2052 * Default maximum age for raw CSS/JS accesses
2054 $wgForcedRawSMaxage = 300;
2057 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
2059 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
2060 * headers sent/modified from these proxies when obtaining the remote IP address
2062 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
2064 $wgSquidServers = array();
2067 * As above, except these servers aren't purged on page changes; use to set a
2068 * list of trusted proxies, etc.
2070 $wgSquidServersNoPurge = array();
2072 /** Maximum number of titles to purge in any one client operation */
2073 $wgMaxSquidPurgeTitles = 400;
2076 * Whether to use a Host header in purge requests sent to the proxy servers
2077 * configured in $wgSquidServers. Set this to false to support Squid
2078 * configured in forward-proxy mode.
2080 * If this is set to true, a Host header will be sent, and only the path
2081 * component of the URL will appear on the request line, as if the request
2082 * were a non-proxy HTTP 1.1 request. Varnish only supports this style of
2083 * request. Squid supports this style of request only if reverse-proxy mode
2084 * (http_port ... accel) is enabled.
2086 * If this is set to false, no Host header will be sent, and the absolute URL
2087 * will be sent in the request line, as is the standard for an HTTP proxy
2088 * request in both HTTP 1.0 and 1.1. This style of request is not supported
2089 * by Varnish, but is supported by Squid in either configuration (forward or
2094 $wgSquidPurgeUseHostHeader = true;
2097 * Routing configuration for HTCP multicast purging. Add elements here to
2098 * enable HTCP and determine which purges are sent where. If set to an empty
2099 * array, HTCP is disabled.
2101 * Each key in this array is a regular expression to match against the purged
2102 * URL, or an empty string to match all URLs. The purged URL is matched against
2103 * the regexes in the order specified, and the first rule whose regex matches
2106 * Example configuration to send purges for upload.wikimedia.org to one
2107 * multicast group and all other purges to another:
2109 * $wgHTCPMulticastRouting = array(
2110 * '|^https?://upload\.wikimedia\.org|' => array(
2111 * 'host' => '239.128.0.113',
2115 * 'host' => '239.128.0.112',
2123 * @see $wgHTCPMulticastTTL
2125 $wgHTCPMulticastRouting = array();
2128 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
2130 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
2131 * present in the earliest Squid implementations of the protocol.
2133 * This setting is DEPRECATED in favor of $wgHTCPMulticastRouting , and kept
2134 * for backwards compatibility only. If $wgHTCPMulticastRouting is set, this
2135 * setting is ignored. If $wgHTCPMulticastRouting is not set and this setting
2136 * is, it is used to populate $wgHTCPMulticastRouting.
2138 * @deprecated since 1.20 in favor of $wgHTCPMulticastRouting
2140 $wgHTCPMulticastAddress = false;
2143 * HTCP multicast port.
2144 * @deprecated since 1.20 in favor of $wgHTCPMulticastRouting
2145 * @see $wgHTCPMulticastAddress
2150 * HTCP multicast TTL.
2151 * @see $wgHTCPMulticastRouting
2153 $wgHTCPMulticastTTL = 1;
2155 /** Should forwarded Private IPs be accepted? */
2156 $wgUsePrivateIPs = false;
2158 /** @} */ # end of HTTP proxy settings
2160 /************************************************************************//**
2161 * @name Language, regional and character encoding settings
2165 /** Site language code, should be one of ./languages/Language(.*).php */
2166 $wgLanguageCode = 'en';
2169 * Language cache size, or really how many languages can we handle
2170 * simultanously without degrading to crawl speed.
2172 $wgLangObjCacheSize = 10;
2175 * Some languages need different word forms, usually for different cases.
2176 * Used in Language::convertGrammar().
2180 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
2183 $wgGrammarForms = array();
2185 /** Treat language links as magic connectors, not inline links */
2186 $wgInterwikiMagic = true;
2188 /** Hide interlanguage links from the sidebar */
2189 $wgHideInterlanguageLinks = false;
2191 /** List of language names or overrides for default names in Names.php */
2192 $wgExtraLanguageNames = array();
2195 * List of language codes that don't correspond to an actual language.
2196 * These codes are mostly leftoffs from renames, or other legacy things.
2197 * This array makes them not appear as a selectable language on the installer,
2198 * and excludes them when running the transstat.php script.
2200 $wgDummyLanguageCodes = array(
2203 'be-x-old' => 'be-tarask',
2207 'qqq' => 'qqq', # Used for message documentation.
2208 'qqx' => 'qqx', # Used for viewing message keys.
2211 'zh-classical' => 'lzh',
2212 'zh-min-nan' => 'nan',
2217 * Character set for use in the article edit box. Language-specific encodings
2220 * This historic feature is one of the first that was added by former MediaWiki
2221 * team leader Brion Vibber, and is used to support the Esperanto x-system.
2223 $wgEditEncoding = '';
2226 * Set this to true to replace Arabic presentation forms with their standard
2227 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
2230 * Note that pages with titles containing presentation forms will become
2231 * inaccessible, run maintenance/cleanupTitles.php to fix this.
2233 $wgFixArabicUnicode = true;
2236 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
2237 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
2238 * set to "ml". Note that some clients (even new clients as of 2010) do not
2239 * support these characters.
2241 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
2242 * fix any ZWJ sequences in existing page titles.
2244 $wgFixMalayalamUnicode = true;
2247 * Set this to always convert certain Unicode sequences to modern ones
2248 * regardless of the content language. This has a small performance
2251 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
2256 $wgAllUnicodeFixes = false;
2259 * Set this to eg 'ISO-8859-1' to perform character set conversion when
2260 * loading old revisions not marked with "utf-8" flag. Use this when
2261 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
2262 * burdensome mass conversion of old text data.
2264 * @note This DOES NOT touch any fields other than old_text. Titles, comments,
2265 * user names, etc still must be converted en masse in the database before
2266 * continuing as a UTF-8 wiki.
2268 $wgLegacyEncoding = false;
2271 * Browser Blacklist for unicode non compliant browsers. Contains a list of
2272 * regexps : "/regexp/" matching problematic browsers. These browsers will
2273 * be served encoded unicode in the edit box instead of real unicode.
2275 $wgBrowserBlackList = array(
2277 * Netscape 2-4 detection
2278 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2279 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2280 * with a negative assertion. The [UIN] identifier specifies the level of security
2281 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2282 * The language string is unreliable, it is missing on NS4 Mac.
2284 * Reference: http://www.psychedelix.com/agents/index.shtml
2286 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2287 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2288 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2291 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2294 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2295 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2296 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2299 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2300 * @link http://en.wikipedia.org/wiki/Template%3AOS9
2302 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2305 * Google wireless transcoder, seems to eat a lot of chars alive
2306 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2308 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2312 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
2313 * create stub reference rows in the text table instead of copying
2314 * the full text of all current entries from 'cur' to 'text'.
2316 * This will speed up the conversion step for large sites, but
2317 * requires that the cur table be kept around for those revisions
2318 * to remain viewable.
2320 * maintenance/migrateCurStubs.php can be used to complete the
2321 * migration in the background once the wiki is back online.
2323 * This option affects the updaters *only*. Any present cur stub
2324 * revisions will be readable at runtime regardless of this setting.
2326 $wgLegacySchemaConversion = false;
2329 * Enable to allow rewriting dates in page text.
2330 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
2332 $wgUseDynamicDates = false;
2334 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
2335 * the interface is set to English.
2337 $wgAmericanDates = false;
2339 * For Hindi and Arabic use local numerals instead of Western style (0-9)
2340 * numerals in interface.
2342 $wgTranslateNumerals = true;
2345 * Translation using MediaWiki: namespace.
2346 * Interface messages will be loaded from the database.
2348 $wgUseDatabaseMessages = true;
2351 * Expiry time for the message cache key
2353 $wgMsgCacheExpiry = 86400;
2356 * Maximum entry size in the message cache, in bytes
2358 $wgMaxMsgCacheEntrySize = 10000;
2360 /** Whether to enable language variant conversion. */
2361 $wgDisableLangConversion = false;
2363 /** Whether to enable language variant conversion for links. */
2364 $wgDisableTitleConversion = false;
2366 /** Whether to enable cononical language links in meta data. */
2367 $wgCanonicalLanguageLinks = true;
2369 /** Default variant code, if false, the default will be the language code */
2370 $wgDefaultLanguageVariant = false;
2373 * Disabled variants array of language variant conversion.
2377 * $wgDisabledVariants[] = 'zh-mo';
2378 * $wgDisabledVariants[] = 'zh-my';
2381 $wgDisabledVariants = array();
2384 * Like $wgArticlePath, but on multi-variant wikis, this provides a
2385 * path format that describes which parts of the URL contain the
2390 * $wgLanguageCode = 'sr';
2391 * $wgVariantArticlePath = '/$2/$1';
2392 * $wgArticlePath = '/wiki/$1';
2395 * A link to /wiki/ would be redirected to /sr/Главна_страна
2397 * It is important that $wgArticlePath not overlap with possible values
2398 * of $wgVariantArticlePath.
2400 $wgVariantArticlePath = false;
2403 * Show a bar of language selection links in the user login and user
2404 * registration forms; edit the "loginlanguagelinks" message to
2407 $wgLoginLanguageSelector = false;
2410 * When translating messages with wfMessage(), it is not always clear what
2411 * should be considered UI messages and what should be content messages.
2413 * For example, for the English Wikipedia, there should be only one 'mainpage',
2414 * so when getting the link for 'mainpage', we should treat it as site content
2415 * and call ->inContentLanguage()->text(), but for rendering the text of the
2416 * link, we call ->text(). The code behaves this way by default. However,
2417 * sites like the Wikimedia Commons do offer different versions of 'mainpage'
2418 * and the like for different languages. This array provides a way to override
2419 * the default behavior.
2422 * To allow language-specific main page and community
2425 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2428 $wgForceUIMsgAsContentMsg = array();
2431 * Fake out the timezone that the server thinks it's in. This will be used for
2432 * date display and not for what's stored in the DB. Leave to null to retain
2433 * your server's OS-based timezone value.
2435 * This variable is currently used only for signature formatting and for local
2436 * time/date parser variables ({{LOCALTIME}} etc.)
2438 * Timezones can be translated by editing MediaWiki messages of type
2439 * timezone-nameinlowercase like timezone-utc.
2441 * A list of useable timezones can found at:
2442 * http://php.net/manual/en/timezones.php
2446 * $wgLocaltimezone = 'UTC';
2447 * $wgLocaltimezone = 'GMT';
2448 * $wgLocaltimezone = 'PST8PDT';
2449 * $wgLocaltimezone = 'Europe/Sweden';
2450 * $wgLocaltimezone = 'CET';
2453 $wgLocaltimezone = null;
2456 * Set an offset from UTC in minutes to use for the default timezone setting
2457 * for anonymous users and new user accounts.
2459 * This setting is used for most date/time displays in the software, and is
2460 * overrideable in user preferences. It is *not* used for signature timestamps.
2462 * By default, this will be set to match $wgLocaltimezone.
2464 $wgLocalTZoffset = null;
2467 * If set to true, this will roll back a few bug fixes introduced in 1.19,
2468 * emulating the 1.18 behaviour, to avoid introducing bug 34832. In 1.19,
2469 * language variant conversion is disabled in interface messages. Setting this
2470 * to true re-enables it.
2472 * @todo This variable should be removed (implicitly false) in 1.20 or earlier.
2474 $wgBug34832TransitionalRollback = true;
2477 /** @} */ # End of language/charset settings
2479 /*************************************************************************//**
2480 * @name Output format and skin settings
2484 /** The default Content-Type header. */
2485 $wgMimeType = 'text/html';
2488 * The content type used in script tags. This is mostly going to be ignored if
2489 * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
2490 * require a MIME type for JavaScript or CSS (those are the default script and
2493 $wgJsMimeType = 'text/javascript';
2496 * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
2497 * doesn't actually have a doctype part to put this variable's contents in.
2499 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2502 * The URL of the document type declaration. Ignored if $wgHtml5 is true,
2503 * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
2504 * to put this variable's contents in.
2506 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2509 * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
2510 * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
2511 * as text/html) the attribute has no effect, so why bother?
2513 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2516 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2517 * instead, and disable HTML5 features. This may eventually be removed and set
2518 * to always true. If it's true, a number of other settings will be irrelevant
2519 * and have no effect.
2524 * Defines the value of the version attribute in the <html> tag, if any.
2525 * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
2526 * $wgHtml5 are both true, and this evaluates to boolean false (like if it's
2527 * left at the default null value), it will be auto-initialized to the correct
2528 * value for RDFa+HTML5. As such, you should have no reason to ever actually
2529 * set this to anything.
2531 $wgHtml5Version = null;
2534 * Enabled RDFa attributes for use in wikitext.
2535 * NOTE: Interaction with HTML5 is somewhat underspecified.
2537 $wgAllowRdfaAttributes = false;
2540 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2542 $wgAllowMicrodataAttributes = false;
2545 * Should we try to make our HTML output well-formed XML? If set to false,
2546 * output will be a few bytes shorter, and the HTML will arguably be more
2547 * readable. If set to true, life will be much easier for the authors of
2548 * screen-scraping bots, and the HTML will arguably be more readable.
2550 * Setting this to false may omit quotation marks on some attributes, omit
2551 * slashes from some self-closing tags, omit some ending tags, etc., where
2552 * permitted by HTML5. Setting it to true will not guarantee that all pages
2553 * will be well-formed, although non-well-formed pages should be rare and it's
2554 * a bug if you find one. Conversely, setting it to false doesn't mean that
2555 * all XML-y constructs will be omitted, just that they might be.
2557 * Because of compatibility with screen-scraping bots, and because it's
2558 * controversial, this is currently left to true by default.
2560 $wgWellFormedXml = true;
2563 * Permit other namespaces in addition to the w3.org default.
2565 * Use the prefix for the key and the namespace for the value.
2569 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2571 * Normally we wouldn't have to define this in the root "<html>"
2572 * element, but IE needs it there in some circumstances.
2574 * This is ignored if $wgHtml5 is true, for the same reason as
2575 * $wgXhtmlDefaultNamespace.
2577 $wgXhtmlNamespaces = array();
2580 * Show IP address, for non-logged in users. It's necessary to switch this off
2581 * for some forms of caching.
2582 * @warning Will disable file cache.
2584 $wgShowIPinHeader = true;
2587 * Site notice shown at the top of each page
2589 * MediaWiki:Sitenotice page, which will override this. You can also
2590 * provide a separate message for logged-out users using the
2591 * MediaWiki:Anonnotice page.
2596 * A subtitle to add to the tagline, for skins that have it/
2598 $wgExtraSubtitle = '';
2601 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2603 $wgSiteSupportPage = '';
2606 * Validate the overall output using tidy and refuse
2607 * to display the page if it's not valid.
2609 $wgValidateAllHtml = false;
2612 * Default skin, for new users and anonymous visitors. Registered users may
2613 * change this to any one of the other available skins in their preferences.
2614 * This has to be completely lowercase; see the "skins" directory for the list
2615 * of available skins.
2617 $wgDefaultSkin = 'vector';
2620 * Specify the name of a skin that should not be presented in the list of
2621 * available skins. Use for blacklisting a skin which you do not want to
2622 * remove from the .../skins/ directory
2625 /** Array for more like $wgSkipSkin. */
2626 $wgSkipSkins = array();
2629 * Optionally, we can specify a stylesheet to use for media="handheld".
2630 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2631 * If left empty, compliant handheld browsers won't pick up the skin
2632 * stylesheet, which is specified for 'screen' media.
2634 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2635 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2637 * Will also be switched in when 'handheld=yes' is added to the URL, like
2638 * the 'printable=yes' mode for print media.
2640 $wgHandheldStyle = false;
2643 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2644 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2645 * which doesn't recognize 'handheld' but does support media queries on its
2648 * Consider only using this if you have a *really good* handheld stylesheet,
2649 * as iPhone users won't have any way to disable it and use the "grown-up"
2652 $wgHandheldForIPhone = false;
2655 * Allow user Javascript page?
2656 * This enables a lot of neat customizations, but may
2657 * increase security risk to users and server load.
2659 $wgAllowUserJs = false;
2662 * Allow user Cascading Style Sheets (CSS)?
2663 * This enables a lot of neat customizations, but may
2664 * increase security risk to users and server load.
2666 $wgAllowUserCss = false;
2669 * Allow user-preferences implemented in CSS?
2670 * This allows users to customise the site appearance to a greater
2671 * degree; disabling it will improve page load times.
2673 $wgAllowUserCssPrefs = true;
2675 /** Use the site's Javascript page? */
2676 $wgUseSiteJs = true;
2678 /** Use the site's Cascading Style Sheets (CSS)? */
2679 $wgUseSiteCss = true;
2682 * Break out of framesets. This can be used to prevent clickjacking attacks,
2683 * or to prevent external sites from framing your site with ads.
2685 $wgBreakFrames = false;
2688 * The X-Frame-Options header to send on pages sensitive to clickjacking
2689 * attacks, such as edit pages. This prevents those pages from being displayed
2690 * in a frame or iframe. The options are:
2692 * - 'DENY': Do not allow framing. This is recommended for most wikis.
2694 * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
2695 * to allow framing within a trusted domain. This is insecure if there
2696 * is a page on the same domain which allows framing of arbitrary URLs.
2698 * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
2699 * full compromise of local user accounts. Private wikis behind a
2700 * corporate firewall are especially vulnerable. This is not
2703 * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
2704 * not just edit pages.
2706 $wgEditPageFrameOptions = 'DENY';
2709 * Disallow framing of API pages directly, by setting the X-Frame-Options
2710 * header. Since the API returns CSRF tokens, allowing the results to be
2711 * framed can compromise your user's account security.
2713 * - 'DENY': Do not allow framing. This is recommended for most wikis.
2714 * - 'SAMEORIGIN': Allow framing by pages on the same domain.
2715 * - false: Allow all framing.
2718 $wgApiFrameOptions = 'DENY';
2721 * Disable output compression (enabled by default if zlib is available)
2723 $wgDisableOutputCompression = false;
2726 * Should we allow a broader set of characters in id attributes, per HTML5? If
2727 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2728 * functionality is ready, it will be on by default with no option.
2730 * Currently this appears to work fine in all browsers, but it's disabled by
2731 * default because it normalizes id's a bit too aggressively, breaking preexisting
2732 * content (particularly Cite). See bug 27733, bug 27694, bug 27474.
2734 $wgExperimentalHtmlIds = false;
2737 * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
2738 * You can add new icons to the built in copyright or poweredby, or you can create
2739 * a new block. Though note that you may need to add some custom css to get good styling
2740 * of new blocks in monobook. vector and modern should work without any special css.
2742 * $wgFooterIcons itself is a key/value array.
2743 * The key is the name of a block that the icons will be wrapped in. The final id varies
2744 * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
2745 * turns it into mw_poweredby.
2746 * The value is either key/value array of icons or a string.
2747 * In the key/value array the key may or may not be used by the skin but it can
2748 * be used to find the icon and unset it or change the icon if needed.
2749 * This is useful for disabling icons that are set by extensions.
2750 * The value should be either a string or an array. If it is a string it will be output
2751 * directly as html, however some skins may choose to ignore it. An array is the preferred format
2752 * for the icon, the following keys are used:
2753 * - src: An absolute url to the image to use for the icon, this is recommended
2754 * but not required, however some skins will ignore icons without an image
2755 * - url: The url to use in the a element arround the text or icon, if not set an a element will not be outputted
2756 * - alt: This is the text form of the icon, it will be displayed without an image in
2757 * skins like Modern or if src is not set, and will otherwise be used as
2758 * the alt="" for the image. This key is required.
2759 * - width and height: If the icon specified by src is not of the standard size
2760 * you can specify the size of image to use with these keys.
2761 * Otherwise they will default to the standard 88x31.
2762 * @todo Reformat documentation.
2764 $wgFooterIcons = array(
2765 "copyright" => array(
2766 "copyright" => array(), // placeholder for the built in copyright icon
2768 "poweredby" => array(
2769 "mediawiki" => array(
2770 "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
2771 "url" => "//www.mediawiki.org/",
2772 "alt" => "Powered by MediaWiki",
2778 * Login / create account link behavior when it's possible for anonymous users
2779 * to create an account.
2780 * - true = use a combined login / create account link
2781 * - false = split login and create account into two separate links
2783 $wgUseCombinedLoginLink = false;
2786 * Search form look for Vector skin only.
2787 * - true = use an icon search button
2788 * - false = use Go & Search buttons
2790 $wgVectorUseSimpleSearch = true;
2793 * Watch and unwatch as an icon rather than a link for Vector skin only.
2794 * - true = use an icon watch/unwatch button
2795 * - false = use watch/unwatch text link
2797 $wgVectorUseIconWatch = false;
2800 * Display user edit counts in various prominent places.
2802 $wgEdititis = false;
2805 * Better directionality support (bug 6100 and related).
2806 * Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
2808 * @deprecated since 1.18
2810 $wgBetterDirectionality = true;
2813 * Some web hosts attempt to rewrite all responses with a 404 (not found)
2814 * status code, mangling or hiding MediaWiki's output. If you are using such a
2815 * host, you should start looking for a better one. While you're doing that,
2816 * set this to false to convert some of MediaWiki's 404 responses to 200 so
2817 * that the generated error pages can be seen.
2819 * In cases where for technical reasons it is more important for MediaWiki to
2820 * send the correct status code than for the body to be transmitted intact,
2821 * this configuration variable is ignored.
2823 $wgSend404Code = true;
2827 * The $wgShowRollbackEditCount variable is used to show how many edits will be
2828 * rollback. The numeric value of the varible are the limit up to are counted.
2829 * If the value is false or 0, the edits are not counted.
2833 $wgShowRollbackEditCount = 10;
2835 /** @} */ # End of output format settings }
2837 /*************************************************************************//**
2838 * @name Resource loader settings
2843 * Client-side resource modules.
2845 * Extensions should add their resource loader module definitions
2846 * to the $wgResourceModules variable.
2850 * $wgResourceModules['ext.myExtension'] = array(
2851 * 'scripts' => 'myExtension.js',
2852 * 'styles' => 'myExtension.css',
2853 * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
2854 * 'localBasePath' => __DIR__,
2855 * 'remoteExtPath' => 'MyExtension',
2859 $wgResourceModules = array();
2862 * Extensions should register foreign module sources here. 'local' is a
2863 * built-in source that is not in this array, but defined by
2864 * ResourceLoader::__construct() so that it cannot be unset.
2868 * $wgResourceLoaderSources['foo'] = array(
2869 * 'loadScript' => 'http://example.org/w/load.php',
2870 * 'apiScript' => 'http://example.org/w/api.php'
2874 $wgResourceLoaderSources = array();
2877 * Default 'remoteBasePath' value for instances of ResourceLoaderFileModule.
2878 * If not set, then $wgScriptPath will be used as a fallback.
2880 $wgResourceBasePath = null;
2883 * Maximum time in seconds to cache resources served by the resource loader.
2885 * @todo Document array structure
2887 $wgResourceLoaderMaxage = array(
2888 'versioned' => array(
2889 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
2890 'server' => 30 * 24 * 60 * 60, // 30 days
2891 // On the client side (e.g. in the browser cache).
2892 'client' => 30 * 24 * 60 * 60, // 30 days
2894 'unversioned' => array(
2895 'server' => 5 * 60, // 5 minutes
2896 'client' => 5 * 60, // 5 minutes
2901 * The default debug mode (on/off) for of ResourceLoader requests.
2903 * This will still be overridden when the debug URL parameter is used.
2905 $wgResourceLoaderDebug = false;
2908 * Enable embedding of certain resources using Edge Side Includes. This will
2909 * improve performance but only works if there is something in front of the
2910 * web server (e..g a Squid or Varnish server) configured to process the ESI.
2912 $wgResourceLoaderUseESI = false;
2915 * Put each statement on its own line when minifying JavaScript. This makes
2916 * debugging in non-debug mode a bit easier.
2918 $wgResourceLoaderMinifierStatementsOnOwnLine = false;
2921 * Maximum line length when minifying JavaScript. This is not a hard maximum:
2922 * the minifier will try not to produce lines longer than this, but may be
2923 * forced to do so in certain cases.
2925 $wgResourceLoaderMinifierMaxLineLength = 1000;
2928 * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
2931 $wgIncludeLegacyJavaScript = true;
2934 * Whether to preload the mediawiki.util module as blocking module in the top
2937 * Before MediaWiki 1.19, modules used to load slower/less asynchronous which
2938 * allowed modules to lack dependencies on 'popular' modules that were likely
2941 * This setting is to aid scripts during migration by providing mediawiki.util
2942 * unconditionally (which was the most commonly missed dependency).
2943 * It doesn't cover all missing dependencies obviously but should fix most of
2946 * This should be removed at some point after site/user scripts have been fixed.
2947 * Enable this if your wiki has a large amount of user/site scripts that are
2948 * lacking dependencies.
2951 $wgPreloadJavaScriptMwUtil = false;
2954 * Whether or not to assign configuration variables to the global window object.
2956 * If this is set to false, old code using deprecated variables will no longer
2959 * @par Example of legacy code:
2961 * if ( window.wgRestrictionEdit ) { ... }
2965 * if ( wgIsArticle ) { ... }
2968 * Instead, one needs to use mw.config.
2969 * @par Example using mw.config global configuration:
2971 * if ( mw.config.exists('wgRestrictionEdit') ) { ... }
2975 * if ( mw.config.get('wgIsArticle') ) { ... }
2978 $wgLegacyJavaScriptGlobals = true;
2981 * If set to a positive number, ResourceLoader will not generate URLs whose
2982 * query string is more than this many characters long, and will instead use
2983 * multiple requests with shorter query strings. This degrades performance,
2984 * but may be needed if your web server has a low (less than, say 1024)
2985 * query string length limit or a low value for suhosin.get.max_value_length
2986 * that you can't increase.
2988 * If set to a negative number, ResourceLoader will assume there is no query
2989 * string length limit.
2991 $wgResourceLoaderMaxQueryLength = -1;
2994 * If set to true, JavaScript modules loaded from wiki pages will be parsed
2995 * prior to minification to validate it.
2997 * Parse errors will result in a JS exception being thrown during module load,
2998 * which avoids breaking other modules loaded in the same request.
3000 $wgResourceLoaderValidateJS = true;
3003 * If set to true, statically-sourced (file-backed) JavaScript resources will
3004 * be parsed for validity before being bundled up into ResourceLoader modules.
3006 * This can be helpful for development by providing better error messages in
3007 * default (non-debug) mode, but JavaScript parsing is slow and memory hungry
3008 * and may fail on large pre-bundled frameworks.
3010 $wgResourceLoaderValidateStaticJS = false;
3013 * If set to true, asynchronous loading of bottom-queue scripts in the "<head>"
3014 * will be enabled. This is an experimental feature that's supposed to make
3015 * JavaScript load faster.
3017 $wgResourceLoaderExperimentalAsyncLoading = false;
3019 /** @} */ # End of resource loader settings }
3022 /*************************************************************************//**
3023 * @name Page title and interwiki link settings
3028 * Name of the project namespace. If left set to false, $wgSitename will be
3031 $wgMetaNamespace = false;
3034 * Name of the project talk namespace.
3036 * Normally you can ignore this and it will be something like
3037 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
3038 * manually for grammatical reasons.
3040 $wgMetaNamespaceTalk = false;
3043 * Additional namespaces. If the namespaces defined in Language.php and
3044 * Namespace.php are insufficient, you can create new ones here, for example,
3045 * to import Help files in other languages. You can also override the namespace
3046 * names of existing namespaces. Extensions developers should use
3047 * $wgCanonicalNamespaceNames.
3049 * @warning Once you delete a namespace, the pages in that namespace will
3050 * no longer be accessible. If you rename it, then you can access them through
3051 * the new namespace name.
3053 * Custom namespaces should start at 100 to avoid conflicting with standard
3054 * namespaces, and should always follow the even/odd main/talk pattern.
3058 * $wgExtraNamespaces = array(
3060 * 101 => "Hilfe_Diskussion",
3062 * 103 => "Discussion_Aide"
3066 * @todo Add a note about maintenance/namespaceDupes.php
3068 $wgExtraNamespaces = array();
3071 * Same as above, but for namespaces with gender distinction.
3072 * Note: the default form for the namespace should also be set
3073 * using $wgExtraNamespaces for the same index.
3076 $wgExtraGenderNamespaces = array();
3079 * Namespace aliases.
3081 * These are alternate names for the primary localised namespace names, which
3082 * are defined by $wgExtraNamespaces and the language file. If a page is
3083 * requested with such a prefix, the request will be redirected to the primary
3086 * Set this to a map from namespace names to IDs.
3090 * $wgNamespaceAliases = array(
3091 * 'Wikipedian' => NS_USER,
3096 $wgNamespaceAliases = array();
3099 * Allowed title characters -- regex character class
3100 * Don't change this unless you know what you're doing
3102 * Problematic punctuation:
3103 * - []{}|# Are needed for link syntax, never enable these
3104 * - <> Causes problems with HTML escaping, don't use
3105 * - % Enabled by default, minor problems with path to query rewrite rules, see below
3106 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
3107 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
3109 * All three of these punctuation problems can be avoided by using an alias,
3110 * instead of a rewrite rule of either variety.
3112 * The problem with % is that when using a path to query rewrite rule, URLs are
3113 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
3114 * %253F, for example, becomes "?". Our code does not double-escape to compensate
3115 * for this, indeed double escaping would break if the double-escaped title was
3116 * passed in the query string rather than the path. This is a minor security issue
3117 * because articles can be created such that they are hard to view or edit.
3119 * In some rare cases you may wish to remove + for compatibility with old links.
3121 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
3122 * this breaks interlanguage links
3124 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
3127 * The interwiki prefix of the current wiki, or false if it doesn't have one.
3129 $wgLocalInterwiki = false;
3132 * Expiry time for cache of interwiki table
3134 $wgInterwikiExpiry = 10800;
3137 * @name Interwiki caching settings.
3141 *$wgInterwikiCache specifies path to constant database file.
3143 * This cdb database is generated by dumpInterwiki from maintenance and has
3145 * - dbname:key - a simple key (e.g. enwiki:meta)
3146 * - _sitename:key - site-scope key (e.g. wiktionary:meta)
3147 * - __global:key - global-scope key (e.g. __global:meta)
3148 * - __sites:dbname - site mapping (e.g. __sites:enwiki)
3150 * Sites mapping just specifies site name, other keys provide "local url"
3153 $wgInterwikiCache = false;
3155 * Specify number of domains to check for messages.
3156 * - 1: Just wiki(db)-level
3157 * - 2: wiki and global levels
3160 $wgInterwikiScopes = 3;
3162 * $wgInterwikiFallbackSite - if unable to resolve from cache
3164 $wgInterwikiFallbackSite = 'wiki';
3165 /** @} */ # end of Interwiki caching settings.
3168 * If local interwikis are set up which allow redirects,
3169 * set this regexp to restrict URLs which will be displayed
3170 * as 'redirected from' links.
3173 * It might look something like this:
3175 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
3178 * Leave at false to avoid displaying any incoming redirect markers.
3179 * This does not affect intra-wiki redirects, which don't change
3182 $wgRedirectSources = false;
3185 * Set this to false to avoid forcing the first letter of links to capitals.
3187 * @warning may break links! This makes links COMPLETELY case-sensitive. Links
3188 * appearing with a capital at the beginning of a sentence will *not* go to the
3189 * same place as links in the middle of a sentence using a lowercase initial.
3191 $wgCapitalLinks = true;
3194 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
3195 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
3196 * true by default (and setting them has no effect), due to various things that
3197 * require them to be so. Also, since Talk namespaces need to directly mirror their
3198 * associated content namespaces, the values for those are ignored in favor of the
3199 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
3204 * $wgCapitalLinkOverrides[ NS_FILE ] = false;
3207 $wgCapitalLinkOverrides = array();
3209 /** Which namespaces should support subpages?
3210 * See Language.php for a list of namespaces.
3212 $wgNamespacesWithSubpages = array(
3215 NS_USER_TALK
=> true,
3216 NS_PROJECT_TALK
=> true,
3217 NS_FILE_TALK
=> true,
3218 NS_MEDIAWIKI
=> true,
3219 NS_MEDIAWIKI_TALK
=> true,
3220 NS_TEMPLATE_TALK
=> true,
3221 NS_HELP_TALK
=> true,
3222 NS_CATEGORY_TALK
=> true
3226 * Array of namespaces which can be deemed to contain valid "content", as far
3227 * as the site statistics are concerned. Useful if additional namespaces also
3228 * contain "content" which should be considered when generating a count of the
3229 * number of articles in the wiki.
3231 $wgContentNamespaces = array( NS_MAIN
);
3234 * Max number of redirects to follow when resolving redirects.
3235 * 1 means only the first redirect is followed (default behavior).
3236 * 0 or less means no redirects are followed.
3238 $wgMaxRedirects = 1;
3241 * Array of invalid page redirect targets.
3242 * Attempting to create a redirect to any of the pages in this array
3243 * will make the redirect fail.
3244 * Userlogout is hard-coded, so it does not need to be listed here.
3245 * (bug 10569) Disallow Mypage and Mytalk as well.
3247 * As of now, this only checks special pages. Redirects to pages in
3248 * other namespaces cannot be invalidated by this variable.
3250 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
3252 /** @} */ # End of title and interwiki settings }
3254 /************************************************************************//**
3255 * @name Parser settings
3256 * These settings configure the transformation from wikitext to HTML.
3261 * Parser configuration. Associative array with the following members:
3263 * class The class name
3265 * preprocessorClass The preprocessor class. Two classes are currently available:
3266 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
3267 * storage, and Preprocessor_DOM, which uses the DOM module for
3268 * temporary storage. Preprocessor_DOM generally uses less memory;
3269 * the speed of the two is roughly the same.
3271 * If this parameter is not given, it uses Preprocessor_DOM if the
3272 * DOM module is available, otherwise it uses Preprocessor_Hash.
3274 * The entire associative array will be passed through to the constructor as
3275 * the first parameter. Note that only Setup.php can use this variable --
3276 * the configuration will change at runtime via $wgParser member functions, so
3277 * the contents of this variable will be out-of-date. The variable can only be
3278 * changed during LocalSettings.php, in particular, it can't be changed during
3279 * an extension setup function.
3281 $wgParserConf = array(
3282 'class' => 'Parser',
3283 #'preprocessorClass' => 'Preprocessor_Hash',
3286 /** Maximum indent level of toc. */
3287 $wgMaxTocLevel = 999;
3290 * A complexity limit on template expansion: the maximum number of nodes visited
3291 * by PPFrame::expand()
3293 $wgMaxPPNodeCount = 1000000;
3296 * A complexity limit on template expansion: the maximum number of elements
3297 * generated by Preprocessor::preprocessToObj(). This allows you to limit the
3298 * amount of memory used by the Preprocessor_DOM node cache: testing indicates
3299 * that each element uses about 160 bytes of memory on a 64-bit processor, so
3300 * this default corresponds to about 155 MB.
3302 * When the limit is exceeded, an exception is thrown.
3304 $wgMaxGeneratedPPNodeCount = 1000000;
3308 * Maximum recursion depth for templates within templates.
3309 * The current parser adds two levels to the PHP call stack for each template,
3310 * and xdebug limits the call stack to 100 by default. So this should hopefully
3311 * stop the parser before it hits the xdebug limit.
3313 $wgMaxTemplateDepth = 40;
3315 /** @see $wgMaxTemplateDepth */
3316 $wgMaxPPExpandDepth = 40;
3318 /** The external URL protocols */
3319 $wgUrlProtocols = array(
3324 'ircs://', // @bug 28503
3326 'telnet://', // Well if we're going to support the above.. -ævar
3327 'nntp://', // @bug 3808 RFC 1738
3334 '//', // for protocol-relative URLs
3338 * If true, removes (substitutes) templates in "~~~~" signatures.
3340 $wgCleanSignatures = true;
3342 /** Whether to allow inline image pointing to other websites */
3343 $wgAllowExternalImages = false;
3346 * If the above is false, you can specify an exception here. Image URLs
3347 * that start with this string are then rendered, while all others are not.
3348 * You can use this to set up a trusted, simple repository of images.
3349 * You may also specify an array of strings to allow multiple sites
3353 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
3354 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
3357 $wgAllowExternalImagesFrom = '';
3359 /** If $wgAllowExternalImages is false, you can allow an on-wiki
3360 * whitelist of regular expression fragments to match the image URL
3361 * against. If the image matches one of the regular expression fragments,
3362 * The image will be displayed.
3364 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
3365 * Or false to disable it
3367 $wgEnableImageWhitelist = true;
3370 * A different approach to the above: simply allow the "<img>" tag to be used.
3371 * This allows you to specify alt text and other attributes, copy-paste HTML to
3372 * your wiki more easily, etc. However, allowing external images in any manner
3373 * will allow anyone with editing rights to snoop on your visitors' IP
3374 * addresses and so forth, if they wanted to, by inserting links to images on
3375 * sites they control.
3377 $wgAllowImageTag = false;
3380 * $wgUseTidy: use tidy to make sure HTML output is sane.
3381 * Tidy is a free tool that fixes broken HTML.
3382 * See http://www.w3.org/People/Raggett/tidy/
3384 * - $wgTidyBin should be set to the path of the binary and
3385 * - $wgTidyConf to the path of the configuration file.
3386 * - $wgTidyOpts can include any number of parameters.
3387 * - $wgTidyInternal controls the use of the PECL extension or the
3388 * libtidy (PHP >= 5) extension to use an in-process tidy library instead
3389 * of spawning a separate program.
3390 * Normally you shouldn't need to override the setting except for
3391 * debugging. To install, use 'pear install tidy' and add a line
3392 * 'extension=tidy.so' to php.ini.
3395 /** @see $wgUseTidy */
3396 $wgAlwaysUseTidy = false;
3397 /** @see $wgUseTidy */
3398 $wgTidyBin = 'tidy';
3399 /** @see $wgUseTidy */
3400 $wgTidyConf = $IP.'/includes/tidy.conf';
3401 /** @see $wgUseTidy */
3403 /** @see $wgUseTidy */
3404 $wgTidyInternal = extension_loaded( 'tidy' );
3407 * Put tidy warnings in HTML comments
3408 * Only works for internal tidy.
3410 $wgDebugTidy = false;
3412 /** Allow raw, unchecked HTML in "<html>...</html>" sections.
3413 * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
3414 * TO RESTRICT EDITING to only those that you trust
3419 * Set a default target for external links, e.g. _blank to pop up a new window
3421 $wgExternalLinkTarget = false;
3424 * If true, external URL links in wiki text will be given the
3425 * rel="nofollow" attribute as a hint to search engines that
3426 * they should not be followed for ranking purposes as they
3427 * are user-supplied and thus subject to spamming.
3429 $wgNoFollowLinks = true;
3432 * Namespaces in which $wgNoFollowLinks doesn't apply.
3433 * See Language.php for a list of namespaces.
3435 $wgNoFollowNsExceptions = array();
3438 * If this is set to an array of domains, external links to these domain names
3439 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3440 * value of $wgNoFollowLinks. For instance:
3442 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3444 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3445 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3448 $wgNoFollowDomainExceptions = array();
3451 * Allow DISPLAYTITLE to change title display
3453 $wgAllowDisplayTitle = true;
3456 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
3459 $wgRestrictDisplayTitle = true;
3462 * Maximum number of calls per parse to expensive parser functions such as
3465 $wgExpensiveParserFunctionLimit = 100;
3468 * Preprocessor caching threshold
3469 * Setting it to 'false' will disable the preprocessor cache.
3471 $wgPreprocessorCacheThreshold = 1000;
3474 * Enable interwiki transcluding. Only when iw_trans=1.
3476 $wgEnableScaryTranscluding = false;
3479 * (see next option $wgGlobalDatabase).
3481 $wgTranscludeCacheExpiry = 3600;
3483 /** @} */ # end of parser settings }
3485 /************************************************************************//**
3491 * Method used to determine if a page in a content namespace should be counted
3492 * as a valid article.
3494 * Redirect pages will never be counted as valid articles.
3496 * This variable can have the following values:
3497 * - 'any': all pages as considered as valid articles
3498 * - 'comma': the page must contain a comma to be considered valid
3499 * - 'link': the page must contain a [[wiki link]] to be considered valid
3500 * - null: the value will be set at run time depending on $wgUseCommaCount:
3501 * if $wgUseCommaCount is false, it will be 'link', if it is true
3502 * it will be 'comma'
3504 * See also See http://www.mediawiki.org/wiki/Manual:Article_count
3506 * Retroactively changing this variable will not affect the existing count,
3507 * to update it, you will need to run the maintenance/updateArticleCount.php
3510 $wgArticleCountMethod = null;
3513 * Backward compatibility setting, will set $wgArticleCountMethod if it is null.
3514 * @deprecated since 1.18; use $wgArticleCountMethod instead
3516 $wgUseCommaCount = false;
3519 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
3520 * values are easier on the database. A value of 1 causes the counters to be
3521 * updated on every hit, any higher value n cause them to update *on average*
3522 * every n hits. Should be set to either 1 or something largish, eg 1000, for
3523 * maximum efficiency.
3525 $wgHitcounterUpdateFreq = 1;
3528 * How many days user must be idle before he is considered inactive. Will affect
3529 * the number shown on Special:Statistics and Special:ActiveUsers special page.
3530 * You might want to leave this as the default value, to provide comparable
3531 * numbers between different wikis.
3533 $wgActiveUserDays = 30;
3535 /** @} */ # End of statistics }
3537 /************************************************************************//**
3538 * @name User accounts, authentication
3542 /** For compatibility with old installations set to false */
3543 $wgPasswordSalt = true;
3546 * Specifies the minimal length of a user password. If set to 0, empty pass-
3547 * words are allowed.
3549 $wgMinimalPasswordLength = 1;
3552 * Whether to allow password resets ("enter some identifying data, and we'll send an email
3553 * with a temporary password you can use to get back into the account") identified by
3554 * various bits of data. Setting all of these to false (or the whole variable to false)
3555 * has the effect of disabling password resets entirely
3557 $wgPasswordResetRoutes = array(
3563 * Maximum number of Unicode characters in signature
3565 $wgMaxSigChars = 255;
3568 * Maximum number of bytes in username. You want to run the maintenance
3569 * script ./maintenance/checkUsernames.php once you have changed this value.
3571 $wgMaxNameChars = 255;
3574 * Array of usernames which may not be registered or logged in from
3575 * Maintenance scripts can still use these
3577 $wgReservedUsernames = array(
3578 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3579 'Conversion script', // Used for the old Wikipedia software upgrade
3580 'Maintenance script', // Maintenance scripts which perform editing, image import script
3581 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3582 'ScriptImporter', // Default user name used by maintenance/importSiteScripts.php
3583 'msg:double-redirect-fixer', // Automatic double redirect fix
3584 'msg:usermessage-editor', // Default user for leaving user messages
3585 'msg:proxyblocker', // For Special:Blockme
3589 * Settings added to this array will override the default globals for the user
3590 * preferences used by anonymous visitors and newly created accounts.
3591 * For instance, to disable section editing links:
3592 * $wgDefaultUserOptions ['editsection'] = 0;
3595 $wgDefaultUserOptions = array(
3596 'ccmeonemails' => 0,
3598 'date' => 'default',
3601 'disablesuggest' => 0,
3602 'editfont' => 'default',
3603 'editondblclick' => 0,
3605 'editsectiononrightclick' => 0,
3606 'enotifminoredits' => 0,
3607 'enotifrevealaddr' => 0,
3608 'enotifusertalkpages' => 1,
3609 'enotifwatchlistpages' => 0,
3610 'extendwatchlist' => 0,
3611 'externaldiff' => 0,
3612 'externaleditor' => 0,
3614 'forceeditsummary' => 0,
3615 'gender' => 'unknown',
3617 'hidepatrolled' => 0,
3621 'minordefault' => 0,
3622 'newpageshidepatrolled' => 0,
3624 'noconvertlink' => 0,
3625 'norollbackdiff' => 0,
3626 'numberheadings' => 0,
3627 'previewonfirst' => 0,
3628 'previewontop' => 1,
3632 'rememberpassword' => 0,
3634 'searchlimit' => 20,
3635 'showhiddencats' => 0,
3636 'showjumplinks' => 1,
3637 'shownumberswatching' => 1,
3641 'stubthreshold' => 0,
3644 'uselivepreview' => 0,
3646 'watchcreations' => 0,
3647 'watchdefault' => 0,
3648 'watchdeletion' => 0,
3649 'watchlistdays' => 3.0,
3650 'watchlisthideanons' => 0,
3651 'watchlisthidebots' => 0,
3652 'watchlisthideliu' => 0,
3653 'watchlisthideminor' => 0,
3654 'watchlisthideown' => 0,
3655 'watchlisthidepatrolled' => 0,
3660 /** An array of preferences to not show for the user */
3661 $wgHiddenPrefs = array();
3664 * Characters to prevent during new account creations.
3665 * This is used in a regular expression character class during
3666 * registration (regex metacharacters like / are escaped).
3668 $wgInvalidUsernameCharacters = '@';
3671 * Character used as a delimiter when testing for interwiki userrights
3672 * (In Special:UserRights, it is possible to modify users on different
3673 * databases if the delimiter is used, e.g. "Someuser@enwiki").
3675 * It is recommended that you have this delimiter in
3676 * $wgInvalidUsernameCharacters above, or you will not be able to
3677 * modify the user rights of those users via Special:UserRights
3679 $wgUserrightsInterwikiDelimiter = '@';
3682 * Use some particular type of external authentication. The specific
3683 * authentication module you use will normally require some extra settings to
3686 * null indicates no external authentication is to be used. Otherwise,
3687 * $wgExternalAuthType must be the name of a non-abstract class that extends
3690 * Core authentication modules can be found in includes/extauth/.
3692 $wgExternalAuthType = null;
3695 * Configuration for the external authentication. This may include arbitrary
3696 * keys that depend on the authentication mechanism. For instance,
3697 * authentication against another web app might require that the database login
3698 * info be provided. Check the file where your auth mechanism is defined for
3699 * info on what to put here.
3701 $wgExternalAuthConf = array();
3704 * When should we automatically create local accounts when external accounts
3705 * already exist, if using ExternalAuth? Can have three values: 'never',
3706 * 'login', 'view'. 'view' requires the external database to support cookies,
3707 * and implies 'login'.
3709 * TODO: Implement 'view' (currently behaves like 'login').
3711 $wgAutocreatePolicy = 'login';
3714 * Policies for how each preference is allowed to be changed, in the presence
3715 * of external authentication. The keys are preference keys, e.g., 'password'
3716 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
3719 * - local: Allow changes to this pref through the wiki interface but only
3720 * apply them locally (default).
3721 * - semiglobal: Allow changes through the wiki interface and try to apply them
3722 * to the foreign database, but continue on anyway if that fails.
3723 * - global: Allow changes through the wiki interface, but only let them go
3724 * through if they successfully update the foreign database.
3725 * - message: Allow no local changes for linked accounts; replace the change
3726 * form with a message provided by the auth plugin, telling the user how to
3727 * change the setting externally (maybe providing a link, etc.). If the auth
3728 * plugin provides no message for this preference, hide it entirely.
3730 * Accounts that are not linked to an external account are never affected by
3731 * this setting. You may want to look at $wgHiddenPrefs instead.
3732 * $wgHiddenPrefs supersedes this option.
3734 * TODO: Implement message, global.
3736 $wgAllowPrefChange = array();
3739 * This is to let user authenticate using https when they come from http.
3740 * Based on an idea by George Herbert on wikitech-l:
3741 * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050039.html
3744 $wgSecureLogin = false;
3746 /** @} */ # end user accounts }
3748 /************************************************************************//**
3749 * @name User rights, access control and monitoring
3754 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
3756 $wgAutoblockExpiry = 86400;
3759 * Set this to true to allow blocked users to edit their own user talk page.
3761 $wgBlockAllowsUTEdit = false;
3763 /** Allow sysops to ban users from accessing Emailuser */
3764 $wgSysopEmailBans = true;
3767 * Limits on the possible sizes of range blocks.
3769 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
3770 * /1 is a small range and a /31 is a large range. For IPv4, setting a limit of
3771 * half the number of bits avoids such errors, and allows entire ISPs to be
3772 * blocked using a small number of range blocks.
3774 * For IPv6, RFC 3177 recommends that a /48 be allocated to every residential
3775 * customer, so range blocks larger than /64 (half the number of bits) will
3776 * plainly be required. RFC 4692 implies that a very large ISP may be
3777 * allocated a /19 if a generous HD-Ratio of 0.8 is used, so we will use that
3778 * as our limit. As of 2012, blocking the whole world would require a /4 range.
3780 $wgBlockCIDRLimit = array(
3781 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
3786 * If true, blocked users will not be allowed to login. When using this with
3787 * a public wiki, the effect of logging out blocked users may actually be
3788 * avers: unless the user's address is also blocked (e.g. auto-block),
3789 * logging the user out will again allow reading and editing, just as for
3790 * anonymous visitors.
3792 $wgBlockDisablesLogin = false;
3795 * Pages anonymous user may see, set as an array of pages titles.
3799 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
3802 * Special:Userlogin and Special:ChangePassword are always whitelisted.
3804 * @note This will only work if $wgGroupPermissions['*']['read'] is false --
3805 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3807 * @note Also that this will only protect _pages in the wiki_. Uploaded files
3808 * will remain readable. You can use img_auth.php to protect uploaded files,
3809 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3811 $wgWhitelistRead = false;
3814 * Should editors be required to have a validated e-mail
3815 * address before being allowed to edit?
3817 $wgEmailConfirmToEdit = false;
3820 * Permission keys given to users in each group.
3822 * This is an array where the keys are all groups and each value is an
3823 * array of the format (right => boolean).
3825 * The second format is used to support per-namespace permissions.
3826 * Note that this feature does not fully work for all permission types.
3828 * All users are implicitly in the '*' group including anonymous visitors;
3829 * logged-in users are all implicitly in the 'user' group. These will be
3830 * combined with the permissions of all groups that a given user is listed
3831 * in in the user_groups table.
3833 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3834 * doing! This will wipe all permissions, and may mean that your users are
3835 * unable to perform certain essential tasks or access new functionality
3836 * when new permissions are introduced and default grants established.
3838 * Functionality to make pages inaccessible has not been extensively tested
3839 * for security. Use at your own risk!
3841 * This replaces $wgWhitelistAccount and $wgWhitelistEdit
3843 $wgGroupPermissions = array();
3845 /** @cond file_level_code */
3846 // Implicit group for all visitors
3847 $wgGroupPermissions['*']['createaccount'] = true;
3848 $wgGroupPermissions['*']['read'] = true;
3849 $wgGroupPermissions['*']['edit'] = true;
3850 $wgGroupPermissions['*']['createpage'] = true;
3851 $wgGroupPermissions['*']['createtalk'] = true;
3852 $wgGroupPermissions['*']['writeapi'] = true;
3853 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3855 // Implicit group for all logged-in accounts
3856 $wgGroupPermissions['user']['move'] = true;
3857 $wgGroupPermissions['user']['move-subpages'] = true;
3858 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3859 $wgGroupPermissions['user']['movefile'] = true;
3860 $wgGroupPermissions['user']['read'] = true;
3861 $wgGroupPermissions['user']['edit'] = true;
3862 $wgGroupPermissions['user']['createpage'] = true;
3863 $wgGroupPermissions['user']['createtalk'] = true;
3864 $wgGroupPermissions['user']['writeapi'] = true;
3865 $wgGroupPermissions['user']['upload'] = true;
3866 $wgGroupPermissions['user']['reupload'] = true;
3867 $wgGroupPermissions['user']['reupload-shared'] = true;
3868 $wgGroupPermissions['user']['minoredit'] = true;
3869 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3870 $wgGroupPermissions['user']['sendemail'] = true;
3872 // Implicit group for accounts that pass $wgAutoConfirmAge
3873 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3875 // Users with bot privilege can have their edits hidden
3876 // from various log pages by default
3877 $wgGroupPermissions['bot']['bot'] = true;
3878 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3879 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3880 $wgGroupPermissions['bot']['autopatrol'] = true;
3881 $wgGroupPermissions['bot']['suppressredirect'] = true;
3882 $wgGroupPermissions['bot']['apihighlimits'] = true;
3883 $wgGroupPermissions['bot']['writeapi'] = true;
3884 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3886 // Most extra permission abilities go to this group
3887 $wgGroupPermissions['sysop']['block'] = true;
3888 $wgGroupPermissions['sysop']['createaccount'] = true;
3889 $wgGroupPermissions['sysop']['delete'] = true;
3890 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3891 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3892 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3893 $wgGroupPermissions['sysop']['undelete'] = true;
3894 $wgGroupPermissions['sysop']['editinterface'] = true;
3895 $wgGroupPermissions['sysop']['editusercss'] = true;
3896 $wgGroupPermissions['sysop']['edituserjs'] = true;
3897 $wgGroupPermissions['sysop']['import'] = true;
3898 $wgGroupPermissions['sysop']['importupload'] = true;
3899 $wgGroupPermissions['sysop']['move'] = true;
3900 $wgGroupPermissions['sysop']['move-subpages'] = true;
3901 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3902 $wgGroupPermissions['sysop']['patrol'] = true;
3903 $wgGroupPermissions['sysop']['autopatrol'] = true;
3904 $wgGroupPermissions['sysop']['protect'] = true;
3905 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3906 $wgGroupPermissions['sysop']['rollback'] = true;
3907 $wgGroupPermissions['sysop']['upload'] = true;
3908 $wgGroupPermissions['sysop']['reupload'] = true;
3909 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3910 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3911 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3912 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3913 $wgGroupPermissions['sysop']['blockemail'] = true;
3914 $wgGroupPermissions['sysop']['markbotedits'] = true;
3915 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3916 $wgGroupPermissions['sysop']['browsearchive'] = true;
3917 $wgGroupPermissions['sysop']['noratelimit'] = true;
3918 $wgGroupPermissions['sysop']['movefile'] = true;
3919 $wgGroupPermissions['sysop']['unblockself'] = true;
3920 $wgGroupPermissions['sysop']['suppressredirect'] = true;
3921 #$wgGroupPermissions['sysop']['upload_by_url'] = true;
3922 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3924 // Permission to change users' group assignments
3925 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3926 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3927 // Permission to change users' groups assignments across wikis
3928 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3929 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3930 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3932 #$wgGroupPermissions['sysop']['deletelogentry'] = true;
3933 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3934 // To hide usernames from users and Sysops
3935 #$wgGroupPermissions['suppress']['hideuser'] = true;
3936 // To hide revisions/log items from users and Sysops
3937 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3938 // For private suppression log access
3939 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3942 * The developer group is deprecated, but can be activated if need be
3943 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3944 * that a lock file be defined and creatable/removable by the web
3947 # $wgGroupPermissions['developer']['siteadmin'] = true;
3952 * Permission keys revoked from users in each group.
3954 * This acts the same way as wgGroupPermissions above, except that
3955 * if the user is in a group here, the permission will be removed from them.
3957 * Improperly setting this could mean that your users will be unable to perform
3958 * certain essential tasks, so use at your own risk!
3960 $wgRevokePermissions = array();
3963 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3965 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3968 * A map of group names that the user is in, to group names that those users
3969 * are allowed to add or revoke.
3971 * Setting the list of groups to add or revoke to true is equivalent to "any
3975 * To allow sysops to add themselves to the "bot" group:
3977 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3981 * Implicit groups may be used for the source group, for instance:
3983 * $wgGroupsRemoveFromSelf = array( '*' => true );
3985 * This allows users in the '*' group (i.e. any user) to remove themselves from
3986 * any group that they happen to be in.
3989 $wgGroupsAddToSelf = array();
3991 /** @see $wgGroupsAddToSelf */
3992 $wgGroupsRemoveFromSelf = array();
3995 * Set of available actions that can be restricted via action=protect
3996 * You probably shouldn't change this.
3997 * Translated through restriction-* messages.
3998 * Title::getRestrictionTypes() will remove restrictions that are not
3999 * applicable to a specific title (create and upload)
4001 $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
4004 * Rights which can be required for each protection level (via action=protect)
4006 * You can add a new protection level that requires a specific
4007 * permission by manipulating this array. The ordering of elements
4008 * dictates the order on the protection form's lists.
4010 * - '' will be ignored (i.e. unprotected)
4011 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
4013 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
4016 * Set the minimum permissions required to edit pages in each
4017 * namespace. If you list more than one permission, a user must
4018 * have all of them to edit pages in that namespace.
4020 * @note NS_MEDIAWIKI is implicitly restricted to 'editinterface'.
4022 $wgNamespaceProtection = array();
4025 * Pages in namespaces in this array can not be used as templates.
4027 * Elements MUST be numeric namespace ids, you can safely use the MediaWiki
4028 * namespaces constants (NS_USER, NS_MAIN...).
4030 * Among other things, this may be useful to enforce read-restrictions
4031 * which may otherwise be bypassed by using the template machanism.
4033 $wgNonincludableNamespaces = array();
4036 * Number of seconds an account is required to age before it's given the
4037 * implicit 'autoconfirm' group membership. This can be used to limit
4038 * privileges of new accounts.
4040 * Accounts created by earlier versions of the software may not have a
4041 * recorded creation date, and will always be considered to pass the age test.
4043 * When left at 0, all registered accounts will pass.
4046 * Set automatic confirmation to 10 minutes (which is 600 seconds):
4048 * $wgAutoConfirmAge = 600; // ten minutes
4050 * Set age to one day:
4052 * $wgAutoConfirmAge = 3600*24; // one day
4055 $wgAutoConfirmAge = 0;
4058 * Number of edits an account requires before it is autoconfirmed.
4059 * Passing both this AND the time requirement is needed. Example:
4063 * $wgAutoConfirmCount = 50;
4066 $wgAutoConfirmCount = 0;
4069 * Automatically add a usergroup to any user who matches certain conditions.
4071 * @todo Redocument $wgAutopromote
4074 * array( '&' or '|' or '^' or '!', cond1, cond2, ... )
4075 * where cond1, cond2, ... are themselves conditions; *OR*
4076 * APCOND_EMAILCONFIRMED, *OR*
4077 * array( APCOND_EMAILCONFIRMED ), *OR*
4078 * array( APCOND_EDITCOUNT, number of edits ), *OR*
4079 * array( APCOND_AGE, seconds since registration ), *OR*
4080 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
4081 * array( APCOND_ISIP, ip ), *OR*
4082 * array( APCOND_IPINRANGE, range ), *OR*
4083 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
4084 * array( APCOND_BLOCKED ), *OR*
4085 * array( APCOND_ISBOT ), *OR*
4086 * similar constructs defined by extensions.
4088 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
4089 * user who has provided an e-mail address.
4091 $wgAutopromote = array(
4092 'autoconfirmed' => array( '&',
4093 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
4094 array( APCOND_AGE
, &$wgAutoConfirmAge ),
4099 * Automatically add a usergroup to any user who matches certain conditions.
4101 * Does not add the user to the group again if it has been removed.
4102 * Also, does not remove the group if the user no longer meets the criteria.
4106 * array( event => criteria, ... )
4108 * Where event is either:
4109 * - 'onEdit' (when user edits)
4110 * - 'onView' (when user views the wiki)
4112 * Criteria has the same format as $wgAutopromote
4114 * @see $wgAutopromote
4117 $wgAutopromoteOnce = array(
4118 'onEdit' => array(),
4123 * Put user rights log entries for autopromotion in recent changes?
4126 $wgAutopromoteOnceLogInRC = true;
4129 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
4130 * can assign which groups at Special:Userrights.
4133 * Bureaucrats can add any group:
4135 * $wgAddGroups['bureaucrat'] = true;
4137 * Bureaucrats can only remove bots and sysops:
4139 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
4141 * Sysops can make bots:
4143 * $wgAddGroups['sysop'] = array( 'bot' );
4145 * Sysops can disable other sysops in an emergency, and disable bots:
4147 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
4150 $wgAddGroups = array();
4151 /** @see $wgAddGroups */
4152 $wgRemoveGroups = array();
4155 * A list of available rights, in addition to the ones defined by the core.
4156 * For extensions only.
4158 $wgAvailableRights = array();
4161 * Optional to restrict deletion of pages with higher revision counts
4162 * to users with the 'bigdelete' permission. (Default given to sysops.)
4164 $wgDeleteRevisionsLimit = 0;
4167 * Number of accounts each IP address may create, 0 to disable.
4169 * @warning Requires memcached */
4170 $wgAccountCreationThrottle = 0;
4173 * Edits matching these regular expressions in body text
4174 * will be recognised as spam and rejected automatically.
4176 * There's no administrator override on-wiki, so be careful what you set. :)
4177 * May be an array of regexes or a single string for backwards compatibility.
4179 * @see http://en.wikipedia.org/wiki/Regular_expression
4181 * @note Each regex needs a beginning/end delimiter, eg: # or /
4183 $wgSpamRegex = array();
4185 /** Same as the above except for edit summaries */
4186 $wgSummarySpamRegex = array();
4189 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open
4193 $wgEnableDnsBlacklist = false;
4196 * @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for
4197 * backward compatibility.
4199 $wgEnableSorbs = false;
4202 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true.
4204 * This is an array of either a URL or an array with the URL and a key (should
4205 * the blacklist require a key).
4209 * $wgDnsBlacklistUrls = array(
4210 * // String containing URL
4211 * 'http.dnsbl.sorbs.net.',
4212 * // Array with URL and key, for services that require a key
4213 * array( 'dnsbl.httpbl.net.', 'mykey' ),
4214 * // Array with just the URL. While this works, it is recommended that you
4215 * // just use a string as shown above
4216 * array( 'opm.tornevall.org.' )
4220 * @note You should end the domain name with a . to avoid searching your
4221 * eventual domain search suffixes.
4224 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
4227 * @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for
4228 * backward compatibility.
4230 $wgSorbsUrl = array();
4233 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
4234 * what the other methods might say.
4236 $wgProxyWhitelist = array();
4239 * Simple rate limiter options to brake edit floods.
4241 * Maximum number actions allowed in the given number of seconds; after that
4242 * the violating client receives HTTP 500 error pages until the period
4246 * To set a generic maximum of 4 hits in 60 seconds:
4248 * $wgRateLimits = array( 4, 60 );
4251 * You could also limit per action and then type of users. See the inline
4252 * code for a template to use.
4254 * This option set is experimental and likely to change.
4256 * @warning Requires memcached.
4258 $wgRateLimits = array(
4260 'anon' => null, // for any and all anonymous edits (aggregate)
4261 'user' => null, // for each logged-in user
4262 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
4263 'ip' => null, // for each anon and recent account
4264 'subnet' => null, // ... with final octet removed
4272 'mailpassword' => array(
4275 'emailuser' => array(
4281 * Set to a filename to log rate limiter hits.
4283 $wgRateLimitLog = null;
4286 * Array of IPs which should be excluded from rate limits.
4287 * This may be useful for whitelisting NAT gateways for conferences, etc.
4289 $wgRateLimitsExcludedIPs = array();
4292 * Log IP addresses in the recentchanges table; can be accessed only by
4293 * extensions (e.g. CheckUser) or a DB admin
4295 $wgPutIPinRC = true;
4298 * Integer defining default number of entries to show on
4299 * special pages which are query-pages such as Special:Whatlinkshere.
4301 $wgQueryPageDefaultLimit = 50;
4304 * Limit password attempts to X attempts per Y seconds per IP per account.
4306 * @warning Requires memcached.
4308 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
4310 /** @} */ # end of user rights settings
4312 /************************************************************************//**
4313 * @name Proxy scanner settings
4318 * If you enable this, every editor's IP address will be scanned for open HTTP
4321 * @warning Don't enable this. Many sysops will report "hostile TCP port scans"
4322 * to your ISP and ask for your server to be shut down.
4323 * You have been warned.
4326 $wgBlockOpenProxies = false;
4327 /** Port we want to scan for a proxy */
4328 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
4329 /** Script used to scan */
4330 $wgProxyScriptPath = "$IP/maintenance/proxy_check.php";
4332 $wgProxyMemcExpiry = 86400;
4333 /** This should always be customised in LocalSettings.php */
4334 $wgSecretKey = false;
4337 * Big list of banned IP addresses.
4339 * This can have the following formats:
4340 * - An array of addresses, either in the values
4341 * or the keys (for backward compatibility)
4342 * - A string, in that case this is the path to a file
4343 * containing the list of IP addresses, one per line
4345 $wgProxyList = array();
4348 * @deprecated since 1.14
4350 $wgProxyKey = false;
4352 /** @} */ # end of proxy scanner settings
4354 /************************************************************************//**
4355 * @name Cookie settings
4360 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
4362 $wgCookieExpiration = 180*86400;
4365 * Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
4366 * or ".any.subdomain.net"
4368 $wgCookieDomain = '';
4372 * Set this variable if you want to restrict cookies to a certain path within
4373 * the domain specified by $wgCookieDomain.
4375 $wgCookiePath = '/';
4378 * Whether the "secure" flag should be set on the cookie. This can be:
4379 * - true: Set secure flag
4380 * - false: Don't set secure flag
4381 * - "detect": Set the secure flag if $wgServer is set to an HTTPS URL
4383 $wgCookieSecure = 'detect';
4386 * By default, MediaWiki checks if the client supports cookies during the
4387 * login process, so that it can display an informative error message if
4388 * cookies are disabled. Set this to true if you want to disable this cookie
4391 $wgDisableCookieCheck = false;
4394 * Cookies generated by MediaWiki have names starting with this prefix. Set it
4395 * to a string to use a custom prefix. Setting it to false causes the database
4396 * name to be used as a prefix.
4398 $wgCookiePrefix = false;
4401 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
4402 * in browsers that support this feature. This can mitigates some classes of
4405 $wgCookieHttpOnly = true;
4408 * If the requesting browser matches a regex in this blacklist, we won't
4409 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
4411 $wgHttpOnlyBlacklist = array(
4412 // Internet Explorer for Mac; sometimes the cookies work, sometimes
4413 // they don't. It's difficult to predict, as combinations of path
4414 // and expiration options affect its parsing.
4415 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
4418 /** A list of cookies that vary the cache (for use by extensions) */
4419 $wgCacheVaryCookies = array();
4421 /** Override to customise the session name */
4422 $wgSessionName = false;
4424 /** @} */ # end of cookie settings }
4426 /************************************************************************//**
4427 * @name LaTeX (mathematical formulas)
4432 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
4433 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
4434 * (ImageMagick) installed and available in the PATH.
4435 * Please see math/README for more information.
4439 /* @} */ # end LaTeX }
4441 /************************************************************************//**
4442 * @name Profiling, testing and debugging
4444 * To enable profiling, edit StartProfiler.php
4450 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
4451 * The debug log file should be not be publicly accessible if it is used, as it
4452 * may contain private data.
4454 $wgDebugLogFile = '';
4457 * Prefix for debug log lines
4459 $wgDebugLogPrefix = '';
4462 * If true, instead of redirecting, show a page with a link to the redirect
4463 * destination. This allows for the inspection of PHP error messages, and easy
4464 * resubmission of form data. For developer use only.
4466 $wgDebugRedirects = false;
4469 * If true, log debugging data from action=raw and load.php.
4470 * This is normally false to avoid overlapping debug entries due to gen=css
4471 * and gen=js requests.
4473 $wgDebugRawPage = false;
4476 * Send debug data to an HTML comment in the output.
4478 * This may occasionally be useful when supporting a non-technical end-user.
4479 * It's more secure than exposing the debug log file to the web, since the
4480 * output only contains private data for the current user. But it's not ideal
4481 * for development use since data is lost on fatal errors and redirects.
4483 $wgDebugComments = false;
4486 * Extensive database transaction state debugging
4490 $wgDebugDBTransactions = false;
4493 * Write SQL queries to the debug log
4495 $wgDebugDumpSql = false;
4498 * Set to an array of log group keys to filenames.
4499 * If set, wfDebugLog() output for that group will go to that file instead
4500 * of the regular $wgDebugLogFile. Useful for enabling selective logging
4503 $wgDebugLogGroups = array();
4506 * Display debug data at the bottom of the main content area.
4508 * Useful for developers and technical users trying to working on a closed wiki.
4510 $wgShowDebug = false;
4513 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
4514 * Since 1.19 also includes memory usage.
4516 $wgDebugTimestamps = false;
4519 * Print HTTP headers for every request in the debug information.
4521 $wgDebugPrintHttpHeaders = true;
4524 * Show the contents of $wgHooks in Special:Version
4526 $wgSpecialVersionShowHooks = false;
4529 * Whether to show "we're sorry, but there has been a database error" pages.
4530 * Displaying errors aids in debugging, but may display information useful
4533 $wgShowSQLErrors = false;
4536 * If set to true, uncaught exceptions will print a complete stack trace
4537 * to output. This should only be used for debugging, as it may reveal
4538 * private information in function parameters due to PHP's backtrace
4541 $wgShowExceptionDetails = false;
4544 * If true, show a backtrace for database errors
4546 $wgShowDBErrorBacktrace = false;
4549 * If true, send the exception backtrace to the error log
4551 $wgLogExceptionBacktrace = true;
4554 * Expose backend server host names through the API and various HTML comments
4556 $wgShowHostnames = false;
4559 * Override server hostname detection with a hardcoded value.
4560 * Should be a string, default false.
4563 $wgOverrideHostname = false;
4566 * If set to true MediaWiki will throw notices for some possible error
4567 * conditions and for deprecated functions.
4569 $wgDevelopmentWarnings = false;
4572 * Release limitation to wfDeprecated warnings, if set to a release number
4573 * development warnings will not be generated for deprecations added in releases
4576 $wgDeprecationReleaseLimit = false;
4578 /** Only record profiling info for pages that took longer than this */
4579 $wgProfileLimit = 0.0;
4581 /** Don't put non-profiling info into log file */
4582 $wgProfileOnly = false;
4585 * Log sums from profiling into "profiling" table in db.
4587 * You have to create a 'profiling' table in your database before using
4588 * this feature. Run set $wgProfileToDatabase to true in
4589 * LocalSettings.php and run maintenance/update.php or otherwise
4590 * manually add patch-profiling.sql to your database.
4592 * To enable profiling, edit StartProfiler.php
4594 $wgProfileToDatabase = false;
4596 /** If true, print a raw call tree instead of per-function report */
4597 $wgProfileCallTree = false;
4599 /** Should application server host be put into profiling table */
4600 $wgProfilePerHost = false;
4603 * Host for UDP profiler.
4605 * The host should be running a daemon which can be obtained from MediaWiki
4606 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
4608 $wgUDPProfilerHost = '127.0.0.1';
4611 * Port for UDP profiler.
4612 * @see $wgUDPProfilerHost
4614 $wgUDPProfilerPort = '3811';
4616 /** Detects non-matching wfProfileIn/wfProfileOut calls */
4617 $wgDebugProfiling = false;
4619 /** Output debug message on every wfProfileIn/wfProfileOut */
4620 $wgDebugFunctionEntry = false;
4623 * Destination for wfIncrStats() data...
4624 * 'cache' to go into the system cache, if enabled (memcached)
4625 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
4628 $wgStatsMethod = 'cache';
4631 * When $wgStatsMethod is 'udp', setting this to a string allows statistics to
4632 * be aggregated over more than one wiki. The string will be used in place of
4633 * the DB name in outgoing UDP packets. If this is set to false, the DB name
4636 $wgAggregateStatsID = false;
4638 /** Whereas to count the number of time an article is viewed.
4639 * Does not work if pages are cached (for example with squid).
4641 $wgDisableCounters = false;
4644 * Set this to an integer to only do synchronous site_stats updates
4645 * one every *this many* updates. The other requests go into pending
4646 * delta values in $wgMemc. Make sure that $wgMemc is a global cache.
4647 * If set to -1, updates *only* go to $wgMemc (useful for daemons).
4649 $wgSiteStatsAsyncFactor = false;
4652 * Parser test suite files to be run by parserTests.php when no specific
4653 * filename is passed to it.
4655 * Extensions may add their own tests to this array, or site-local tests
4656 * may be added via LocalSettings.php
4660 $wgParserTestFiles = array(
4661 "$IP/tests/parser/parserTests.txt",
4662 "$IP/tests/parser/extraParserTests.txt"
4666 * If configured, specifies target CodeReview installation to send test
4667 * result data from 'parserTests.php --upload'
4669 * Something like this:
4670 * $wgParserTestRemote = array(
4671 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
4672 * 'repo' => 'MediaWiki',
4673 * 'suite' => 'ParserTests',
4674 * 'path' => '/trunk/phase3', // not used client-side; for reference
4675 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
4678 $wgParserTestRemote = false;
4681 * Allow running of javascript test suites via [[Special:JavaScriptTest]] (such as QUnit).
4683 $wgEnableJavaScriptTest = false;
4686 * Configuration for javascript testing.
4688 $wgJavaScriptTestConfig = array(
4690 // Page where documentation can be found relevant to the QUnit test suite being ran.
4691 // Used in the intro paragraph on [[Special:JavaScriptTest/qunit]] for the
4692 // documentation link in the "javascripttest-qunit-intro" message.
4693 'documentation' => '//www.mediawiki.org/wiki/Manual:JavaScript_unit_testing',
4694 // If you are submitting the QUnit test suite to a TestSwarm instance,
4695 // point this to the "inject.js" script of that instance. This is was registers
4696 // the QUnit hooks to extract the test results and push them back up into the
4697 // TestSwarm database.
4698 // @example 'http://localhost/testswarm/js/inject.js'
4699 // @example '//integration.mediawiki.org/testswarm/js/inject.js'
4700 'testswarm-injectjs' => false,
4706 * Overwrite the caching key prefix with custom value.
4709 $wgCachePrefix = false;
4712 * Display the new debugging toolbar. This also enables profiling on database
4713 * queries and other useful output.
4714 * Will disable file cache.
4718 $wgDebugToolbar = false;
4720 /** @} */ # end of profiling, testing and debugging }
4722 /************************************************************************//**
4728 * Set this to true to disable the full text search feature.
4730 $wgDisableTextSearch = false;
4733 * Set to true to have nicer highligted text in search results,
4734 * by default off due to execution overhead
4736 $wgAdvancedSearchHighlighting = false;
4739 * Regexp to match word boundaries, defaults for non-CJK languages
4740 * should be empty for CJK since the words are not separate
4742 $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
4745 * Set to true to have the search engine count total
4746 * search matches to present in the Special:Search UI.
4747 * Not supported by every search engine shipped with MW.
4749 * This could however be slow on larger wikis, and is pretty flaky
4750 * with the current title vs content split. Recommend avoiding until
4751 * that's been worked out cleanly; but this may aid in testing the
4752 * search UI and API to confirm that the result count works.
4754 $wgCountTotalSearchHits = false;
4757 * Template for OpenSearch suggestions, defaults to API action=opensearch
4759 * Sites with heavy load would tipically have these point to a custom
4760 * PHP wrapper to avoid firing up mediawiki for every keystroke
4762 * Placeholders: {searchTerms}
4765 $wgOpenSearchTemplate = false;
4768 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
4769 * false if you've disabled scripts that use api?action=opensearch and
4770 * want reduce load caused by cached scripts still pulling suggestions.
4771 * It will let the API fallback by responding with an empty array.
4773 $wgEnableOpenSearchSuggest = true;
4776 * Expiry time for search suggestion responses
4778 $wgSearchSuggestCacheExpiry = 1200;
4781 * If you've disabled search semi-permanently, this also disables updates to the
4782 * table. If you ever re-enable, be sure to rebuild the search table.
4784 $wgDisableSearchUpdate = false;
4787 * List of namespaces which are searched by default.
4791 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
4792 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
4795 $wgNamespacesToBeSearchedDefault = array(
4800 * Namespaces to be searched when user clicks the "Help" tab
4801 * on Special:Search.
4803 * Same format as $wgNamespacesToBeSearchedDefault.
4805 $wgNamespacesToBeSearchedHelp = array(
4811 * If set to true the 'searcheverything' preference will be effective only for
4813 * Useful for big wikis to maintain different search profiles for anonymous and
4817 $wgSearchEverythingOnlyLoggedIn = false;
4820 * Disable the internal MySQL-based search, to allow it to be
4821 * implemented by an extension instead.
4823 $wgDisableInternalSearch = false;
4826 * Set this to a URL to forward search requests to some external location.
4827 * If the URL includes '$1', this will be replaced with the URL-encoded
4831 * To forward to Google you'd have something like:
4833 * $wgSearchForwardUrl =
4834 * 'http://www.google.com/search?q=$1' .
4835 * '&domains=http://example.com' .
4836 * '&sitesearch=http://example.com' .
4837 * '&ie=utf-8&oe=utf-8';
4840 $wgSearchForwardUrl = null;
4843 * Search form behavior.
4844 * - true = use Go & Search buttons
4845 * - false = use Go button & Advanced search link
4847 $wgUseTwoButtonsSearchForm = true;
4850 * Array of namespaces to generate a Google sitemap for when the
4851 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4852 * nerated for all namespaces.
4854 $wgSitemapNamespaces = false;
4857 * Custom namespace priorities for sitemaps. Setting this will allow you to
4858 * set custom priorities to namsepaces when sitemaps are generated using the
4859 * maintenance/generateSitemap.php script.
4861 * This should be a map of namespace IDs to priority
4864 * $wgSitemapNamespacesPriorities = array(
4870 $wgSitemapNamespacesPriorities = false;
4873 * If true, searches for IP addresses will be redirected to that IP's
4874 * contributions page. E.g. searching for "1.2.3.4" will redirect to
4875 * [[Special:Contributions/1.2.3.4]]
4877 $wgEnableSearchContributorsByIP = true;
4879 /** @} */ # end of search settings
4881 /************************************************************************//**
4882 * @name Edit user interface
4887 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
4888 * fall back to the old behaviour (no merging).
4890 $wgDiff3 = '/usr/bin/diff3';
4893 * Path to the GNU diff utility.
4895 $wgDiff = '/usr/bin/diff';
4898 * Which namespaces have special treatment where they should be preview-on-open
4899 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
4900 * can specify namespaces of pages they have special treatment for
4902 $wgPreviewOnOpenNamespaces = array(
4907 * Activate external editor interface for files and pages
4908 * See http://www.mediawiki.org/wiki/Manual:External_editors
4910 $wgUseExternalEditor = true;
4912 /** Go button goes straight to the edit screen if the article doesn't exist. */
4913 $wgGoToEdit = false;
4916 * Enable the UniversalEditButton for browsers that support it
4917 * (currently only Firefox with an extension)
4918 * See http://universaleditbutton.org for more background information
4920 $wgUniversalEditButton = true;
4923 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4924 * will try to automatically create one. This feature can be disabled by set-
4925 * ting this variable false.
4927 $wgUseAutomaticEditSummaries = true;
4929 /** @} */ # end edit UI }
4931 /************************************************************************//**
4933 * See also $wgSiteNotice
4938 * @cond file_level_code
4939 * Set $wgCommandLineMode if it's not set already, to avoid notices
4941 if( !isset( $wgCommandLineMode ) ) {
4942 $wgCommandLineMode = false;
4946 /** For colorized maintenance script output, is your terminal background dark ? */
4947 $wgCommandLineDarkBg = false;
4950 * Array for extensions to register their maintenance scripts with the
4951 * system. The key is the name of the class and the value is the full
4954 $wgMaintenanceScripts = array();
4957 * Set this to a string to put the wiki into read-only mode. The text will be
4958 * used as an explanation to users.
4960 * This prevents most write operations via the web interface. Cache updates may
4961 * still be possible. To prevent database writes completely, use the read_only
4967 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
4968 * Its contents will be shown to users as part of the read-only warning
4971 * Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
4973 $wgReadOnlyFile = false;
4976 * When you run the web-based upgrade utility, it will tell you what to set
4977 * this to in order to authorize the upgrade process. It will subsequently be
4978 * used as a password, to authorize further upgrades.
4980 * For security, do not set this to a guessable string. Use the value supplied
4981 * by the install/upgrade process. To cause the upgrader to generate a new key,
4982 * delete the old key from LocalSettings.php.
4984 $wgUpgradeKey = false;
4987 * Map GIT repository URLs to viewer URLs to provide links in Special:Version
4989 * Key is a pattern passed to preg_match() and preg_replace(),
4990 * without the delimiters (which are #) and must match the whole URL.
4991 * The value is the replacement for the key (it can contain $1, etc.)
4992 * %h will be replaced by the short SHA-1 (7 first chars) and %H by the
4993 * full SHA-1 of the HEAD revision.
4997 $wgGitRepositoryViewers = array(
4998 'https://gerrit.wikimedia.org/r/p/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
4999 'ssh://(?:[a-z0-9_]+@)?gerrit.wikimedia.org:29418/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
5002 /** @} */ # End of maintenance }
5004 /************************************************************************//**
5005 * @name Recent changes, new pages, watchlist and history
5010 * Recentchanges items are periodically purged; entries older than this many
5012 * Default: 13 weeks = about three months
5014 $wgRCMaxAge = 13 * 7 * 24 * 3600;
5017 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
5018 * higher than what will be stored. Note that this is disabled by default
5019 * because we sometimes do have RC data which is beyond the limit for some
5020 * reason, and some users may use the high numbers to display that data which
5023 $wgRCFilterByAge = false;
5026 * List of Days and Limits options to list in the Special:Recentchanges and
5027 * Special:Recentchangeslinked pages.
5029 $wgRCLinkLimits = array( 50, 100, 250, 500 );
5030 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
5033 * Send recent changes updates via UDP. The updates will be formatted for IRC.
5034 * Set this to the IP address of the receiver.
5036 $wgRC2UDPAddress = false;
5039 * Port number for RC updates
5041 $wgRC2UDPPort = false;
5044 * Prefix to prepend to each UDP packet.
5045 * This can be used to identify the wiki. A script is available called
5046 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
5047 * tab to identify the IRC channel to send the log line to.
5049 $wgRC2UDPPrefix = '';
5052 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
5053 * IRC feed. If this is set to a string, that string will be used as the prefix.
5055 $wgRC2UDPInterwikiPrefix = false;
5058 * Set to true to omit "bot" edits (by users with the bot permission) from the
5061 $wgRC2UDPOmitBots = false;
5064 * Enable user search in Special:Newpages
5065 * This is really a temporary hack around an index install bug on some Wikipedias.
5066 * Kill it once fixed.
5068 $wgEnableNewpagesUserFilter = true;
5070 /** Use RC Patrolling to check for vandalism */
5071 $wgUseRCPatrol = true;
5073 /** Use new page patrolling to check new pages on Special:Newpages */
5074 $wgUseNPPatrol = true;
5076 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
5079 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
5080 * eg Recentchanges, Newpages. */
5083 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
5084 * A cached version will continue to be served out even if changes
5085 * are made, until this many seconds runs out since the last render.
5087 * If set to 0, feed caching is disabled. Use this for debugging only;
5088 * feed generation can be pretty slow with diffs.
5090 $wgFeedCacheTimeout = 60;
5092 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
5093 * pages larger than this size. */
5094 $wgFeedDiffCutoff = 32768;
5096 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
5097 * every page. Some sites might have a different feed they'd like to promote
5098 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
5099 * Should be a format as key (either 'rss' or 'atom') and an URL to the feed
5102 * Configure the 'atom' feed to http://example.com/somefeed.xml
5104 * $wgSiteFeed['atom'] = "http://example.com/somefeed.xml";
5107 $wgOverrideSiteFeed = array();
5110 * Available feeds objects.
5111 * Should probably only be defined when a page is syndicated ie when
5112 * $wgOut->isSyndicated() is true.
5114 $wgFeedClasses = array(
5116 'atom' => 'AtomFeed',
5120 * Which feed types should we provide by default? This can include 'rss',
5121 * 'atom', neither, or both.
5123 $wgAdvertisedFeedTypes = array( 'atom' );
5125 /** Show watching users in recent changes, watchlist and page history views */
5126 $wgRCShowWatchingUsers = false; # UPO
5127 /** Show watching users in Page views */
5128 $wgPageShowWatchingUsers = false;
5129 /** Show the amount of changed characters in recent changes */
5130 $wgRCShowChangedSize = true;
5133 * If the difference between the character counts of the text
5134 * before and after the edit is below that value, the value will be
5135 * highlighted on the RC page.
5137 $wgRCChangedSizeThreshold = 500;
5140 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
5141 * view for watched pages with new changes */
5142 $wgShowUpdatedMarker = true;
5145 * Disable links to talk pages of anonymous users (IPs) in listings on special
5146 * pages like page history, Special:Recentchanges, etc.
5148 $wgDisableAnonTalk = false;
5151 * Enable filtering of categories in Recentchanges
5153 $wgAllowCategorizedRecentChanges = false;
5156 * Allow filtering by change tag in recentchanges, history, etc
5157 * Has no effect if no tags are defined in valid_tag.
5159 $wgUseTagFilter = true;
5161 /** @} */ # end RC/watchlist }
5163 /************************************************************************//**
5164 * @name Copyright and credits settings
5169 * Override for copyright metadata.
5171 * This is the name of the page containing information about the wiki's copyright status,
5172 * which will be added as a link in the footer if it is specified. It overrides
5173 * $wgRightsUrl if both are specified.
5175 $wgRightsPage = null;
5178 * Set this to specify an external URL containing details about the content license used on your wiki.
5179 * If $wgRightsPage is set then this setting is ignored.
5181 $wgRightsUrl = null;
5184 * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
5185 * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
5186 * page will also be used as the link if this variable is not set.
5188 $wgRightsText = null;
5191 * Override for copyright metadata.
5193 $wgRightsIcon = null;
5196 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
5198 $wgLicenseTerms = false;
5201 * Set this to some HTML to override the rights icon with an arbitrary logo
5202 * @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright']
5204 $wgCopyrightIcon = null;
5206 /** Set this to true if you want detailed copyright information forms on Upload. */
5207 $wgUseCopyrightUpload = false;
5210 * Set this to the number of authors that you want to be credited below an
5211 * article text. Set it to zero to hide the attribution block, and a negative
5212 * number (like -1) to show all authors. Note that this will require 2-3 extra
5213 * database hits, which can have a not insignificant impact on performance for
5218 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
5219 * Otherwise, link to a separate credits page. */
5220 $wgShowCreditsIfMax = true;
5222 /** @} */ # end of copyright and credits settings }
5224 /************************************************************************//**
5225 * @name Import / Export
5230 * List of interwiki prefixes for wikis we'll accept as sources for
5231 * Special:Import (for sysops). Since complete page history can be imported,
5232 * these should be 'trusted'.
5234 * If a user has the 'import' permission but not the 'importupload' permission,
5235 * they will only be able to run imports through this transwiki interface.
5237 $wgImportSources = array();
5240 * Optional default target namespace for interwiki imports.
5241 * Can use this to create an incoming "transwiki"-style queue.
5242 * Set to numeric key, not the name.
5244 * Users may override this in the Special:Import dialog.
5246 $wgImportTargetNamespace = null;
5249 * If set to false, disables the full-history option on Special:Export.
5250 * This is currently poorly optimized for long edit histories, so is
5251 * disabled on Wikimedia's sites.
5253 $wgExportAllowHistory = true;
5256 * If set nonzero, Special:Export requests for history of pages with
5257 * more revisions than this will be rejected. On some big sites things
5258 * could get bogged down by very very long pages.
5260 $wgExportMaxHistory = 0;
5263 * Return distinct author list (when not returning full history)
5265 $wgExportAllowListContributors = false;
5268 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
5269 * up to this specified level, which will cause it to include all
5270 * pages linked to from the pages you specify. Since this number
5271 * can become *insanely large* and could easily break your wiki,
5272 * it's disabled by default for now.
5274 * @warning There's a HARD CODED limit of 5 levels of recursion to prevent a
5275 * crazy-big export from being done by someone setting the depth number too
5276 * high. In other words, last resort safety net.
5278 $wgExportMaxLinkDepth = 0;
5281 * Whether to allow the "export all pages in namespace" option
5283 $wgExportFromNamespaces = false;
5286 * Whether to allow exporting the entire wiki into a single file
5288 $wgExportAllowAll = false;
5290 /** @} */ # end of import/export }
5292 /*************************************************************************//**
5298 * A list of callback functions which are called once MediaWiki is fully
5301 $wgExtensionFunctions = array();
5304 * Extension messages files.
5306 * Associative array mapping extension name to the filename where messages can be
5307 * found. The file should contain variable assignments. Any of the variables
5308 * present in languages/messages/MessagesEn.php may be defined, but $messages
5309 * is the most common.
5311 * Variables defined in extensions will override conflicting variables defined
5316 * $wgExtensionMessagesFiles['ConfirmEdit'] = __DIR__.'/ConfirmEdit.i18n.php';
5319 $wgExtensionMessagesFiles = array();
5322 * Parser output hooks.
5323 * This is an associative array where the key is an extension-defined tag
5324 * (typically the extension name), and the value is a PHP callback.
5325 * These will be called as an OutputPageParserOutput hook, if the relevant
5326 * tag has been registered with the parser output object.
5328 * Registration is done with $pout->addOutputHook( $tag, $data ).
5330 * The callback has the form:
5332 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
5335 $wgParserOutputHooks = array();
5338 * List of valid skin names.
5339 * The key should be the name in all lower case, the value should be a properly
5340 * cased name for the skin. This value will be prefixed with "Skin" to create the
5341 * class name of the skin to load, and if the skin's class cannot be found through
5342 * the autoloader it will be used to load a .php file by that name in the skins directory.
5343 * The default skins will be added later, by Skin::getSkinNames(). Use
5344 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
5346 $wgValidSkinNames = array();
5349 * Special page list.
5350 * See the top of SpecialPage.php for documentation.
5352 $wgSpecialPages = array();
5355 * Array mapping class names to filenames, for autoloading.
5357 $wgAutoloadClasses = array();
5360 * An array of extension types and inside that their names, versions, authors,
5361 * urls, descriptions and pointers to localized description msgs. Note that
5362 * the version, url, description and descriptionmsg key can be omitted.
5365 * $wgExtensionCredits[$type][] = array(
5366 * 'name' => 'Example extension',
5368 * 'path' => __FILE__,
5369 * 'author' => 'Foo Barstein',
5370 * 'url' => 'http://wwww.example.com/Example%20Extension/',
5371 * 'description' => 'An example extension',
5372 * 'descriptionmsg' => 'exampleextension-desc',
5376 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
5377 * Where 'descriptionmsg' can be an array with message key and parameters:
5378 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
5380 $wgExtensionCredits = array();
5383 * Authentication plugin.
5384 * @var $wgAuth AuthPlugin
5389 * Global list of hooks.
5391 * The key is one of the events made available by MediaWiki, you can find
5392 * a description for most of them in docs/hooks.txt. The array is used
5393 * internally by Hook:run().
5395 * The value can be one of:
5397 * - A function name:
5399 * $wgHooks['event_name'][] = $function;
5401 * - A function with some data:
5403 * $wgHooks['event_name'][] = array($function, $data);
5405 * - A an object method:
5407 * $wgHooks['event_name'][] = array($object, 'method');
5410 * @warning You should always append to an event array or you will end up
5411 * deleting a previous registered hook.
5413 * @todo Does it support PHP closures?
5418 * Maps jobs to their handling classes; extensions
5419 * can add to this to provide custom jobs
5421 $wgJobClasses = array(
5422 'refreshLinks' => 'RefreshLinksJob',
5423 'refreshLinks2' => 'RefreshLinksJob2',
5424 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
5425 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
5426 'sendMail' => 'EmaillingJob',
5427 'enotifNotify' => 'EnotifNotifyJob',
5428 'fixDoubleRedirect' => 'DoubleRedirectJob',
5429 'uploadFromUrl' => 'UploadFromUrlJob',
5435 * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
5438 * - Very long-running jobs.
5439 * - Jobs that you would never want to run as part of a page rendering request.
5440 * - Jobs that you want to run on specialized machines ( like transcoding, or a particular
5441 * machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
5443 $wgJobTypesExcludedFromDefaultQueue = array();
5446 * Map of job types to configuration arrays.
5447 * These settings should be global to all wikis.
5449 $wgJobTypeConf = array(
5450 'default' => array( 'class' => 'JobQueueDB', 'order' => 'random' ),
5454 * Additional functions to be performed with updateSpecialPages.
5455 * Expensive Querypages are already updated.
5457 $wgSpecialPageCacheUpdates = array(
5458 'Statistics' => array( 'SiteStatsUpdate', 'cacheUpdate' )
5462 * Hooks that are used for outputting exceptions. Format is:
5463 * $wgExceptionHooks[] = $funcname
5465 * $wgExceptionHooks[] = array( $class, $funcname )
5466 * Hooks should return strings or false
5468 $wgExceptionHooks = array();
5471 * Page property link table invalidation lists. When a page property
5472 * changes, this may require other link tables to be updated (eg
5473 * adding __HIDDENCAT__ means the hiddencat tracking category will
5474 * have been added, so the categorylinks table needs to be rebuilt).
5475 * This array can be added to by extensions.
5477 $wgPagePropLinkInvalidations = array(
5478 'hiddencat' => 'categorylinks',
5481 /** @} */ # End extensions }
5483 /*************************************************************************//**
5489 * Use experimental, DMOZ-like category browser
5491 $wgUseCategoryBrowser = false;
5494 * On category pages, show thumbnail gallery for images belonging to that
5495 * category instead of listing them as articles.
5497 $wgCategoryMagicGallery = true;
5500 * Paging limit for categories
5502 $wgCategoryPagingLimit = 200;
5505 * Specify how category names should be sorted, when listed on a category page.
5506 * A sorting scheme is also known as a collation.
5508 * Available values are:
5510 * - uppercase: Converts the category name to upper case, and sorts by that.
5512 * - identity: Does no conversion. Sorts by binary value of the string.
5514 * - uca-default: Provides access to the Unicode Collation Algorithm with
5515 * the default element table. This is a compromise collation which sorts
5516 * all languages in a mediocre way. However, it is better than "uppercase".
5518 * To use the uca-default collation, you must have PHP's intl extension
5519 * installed. See http://php.net/manual/en/intl.setup.php . The details of the
5520 * resulting collation will depend on the version of ICU installed on the
5523 * After you change this, you must run maintenance/updateCollation.php to fix
5524 * the sort keys in the database.
5526 * Extensions can define there own collations by subclassing Collation
5527 * and using the Collation::factory hook.
5529 $wgCategoryCollation = 'uppercase';
5531 /** @} */ # End categories }
5533 /*************************************************************************//**
5539 * The logging system has two levels: an event type, which describes the
5540 * general category and can be viewed as a named subset of all logs; and
5541 * an action, which is a specific kind of event that can exist in that
5544 $wgLogTypes = array(
5559 * This restricts log access to those who have a certain right
5560 * Users without this will not see it in the option menu and can not view it
5561 * Restricted logs are not added to recent changes
5562 * Logs should remain non-transcludable
5563 * Format: logtype => permissiontype
5565 $wgLogRestrictions = array(
5566 'suppress' => 'suppressionlog'
5570 * Show/hide links on Special:Log will be shown for these log types.
5572 * This is associative array of log type => boolean "hide by default"
5574 * See $wgLogTypes for a list of available log types.
5578 * $wgFilterLogTypes => array(
5580 * 'import' => false,
5584 * Will display show/hide links for the move and import logs. Move logs will be
5585 * hidden by default unless the link is clicked. Import logs will be shown by
5586 * default, and hidden when the link is clicked.
5588 * A message of the form log-show-hide-[type] should be added, and will be used
5589 * for the link text.
5591 $wgFilterLogTypes = array(
5596 * Lists the message key string for each log type. The localized messages
5597 * will be listed in the user interface.
5599 * Extensions with custom log types may add to this array.
5601 * @since 1.19, if you follow the naming convention log-name-TYPE,
5602 * where TYPE is your log type, yoy don't need to use this array.
5604 $wgLogNames = array(
5605 '' => 'all-logs-page',
5606 'block' => 'blocklogpage',
5607 'protect' => 'protectlogpage',
5608 'rights' => 'rightslog',
5609 'delete' => 'dellogpage',
5610 'upload' => 'uploadlogpage',
5611 'move' => 'movelogpage',
5612 'import' => 'importlogpage',
5613 'patrol' => 'patrol-log-page',
5614 'merge' => 'mergelog',
5615 'suppress' => 'suppressionlog',
5619 * Lists the message key string for descriptive text to be shown at the
5620 * top of each log type.
5622 * Extensions with custom log types may add to this array.
5624 * @since 1.19, if you follow the naming convention log-description-TYPE,
5625 * where TYPE is your log type, yoy don't need to use this array.
5627 $wgLogHeaders = array(
5628 '' => 'alllogstext',
5629 'block' => 'blocklogtext',
5630 'protect' => 'protectlogtext',
5631 'rights' => 'rightslogtext',
5632 'delete' => 'dellogpagetext',
5633 'upload' => 'uploadlogpagetext',
5634 'move' => 'movelogpagetext',
5635 'import' => 'importlogpagetext',
5636 'patrol' => 'patrol-log-header',
5637 'merge' => 'mergelogpagetext',
5638 'suppress' => 'suppressionlogtext',
5642 * Lists the message key string for formatting individual events of each
5643 * type and action when listed in the logs.
5645 * Extensions with custom log types may add to this array.
5647 $wgLogActions = array(
5648 'block/block' => 'blocklogentry',
5649 'block/unblock' => 'unblocklogentry',
5650 'block/reblock' => 'reblock-logentry',
5651 'protect/protect' => 'protectedarticle',
5652 'protect/modify' => 'modifiedarticleprotection',
5653 'protect/unprotect' => 'unprotectedarticle',
5654 'protect/move_prot' => 'movedarticleprotection',
5655 'upload/upload' => 'uploadedimage',
5656 'upload/overwrite' => 'overwroteimage',
5657 'upload/revert' => 'uploadedimage',
5658 'import/upload' => 'import-logentry-upload',
5659 'import/interwiki' => 'import-logentry-interwiki',
5660 'merge/merge' => 'pagemerge-logentry',
5661 'suppress/block' => 'blocklogentry',
5662 'suppress/reblock' => 'reblock-logentry',
5666 * The same as above, but here values are names of functions,
5668 * @see LogPage::actionText
5671 $wgLogActionsHandlers = array(
5672 'move/move' => 'MoveLogFormatter',
5673 'move/move_redir' => 'MoveLogFormatter',
5674 'delete/delete' => 'DeleteLogFormatter',
5675 'delete/restore' => 'DeleteLogFormatter',
5676 'delete/revision' => 'DeleteLogFormatter',
5677 'delete/event' => 'DeleteLogFormatter',
5678 'suppress/revision' => 'DeleteLogFormatter',
5679 'suppress/event' => 'DeleteLogFormatter',
5680 'suppress/delete' => 'DeleteLogFormatter',
5681 'patrol/patrol' => 'PatrolLogFormatter',
5682 'rights/rights' => 'RightsLogFormatter',
5683 'rights/autopromote' => 'RightsLogFormatter',
5687 * Maintain a log of newusers at Log/newusers?
5689 $wgNewUserLog = true;
5691 /** @} */ # end logging }
5693 /*************************************************************************//**
5694 * @name Special pages (general and miscellaneous)
5699 * Allow special page inclusions such as {{Special:Allpages}}
5701 $wgAllowSpecialInclusion = true;
5704 * Set this to an array of special page names to prevent
5705 * maintenance/updateSpecialPages.php from updating those pages.
5707 $wgDisableQueryPageUpdate = false;
5710 * List of special pages, followed by what subtitle they should go under
5711 * at Special:SpecialPages
5713 $wgSpecialPageGroups = array(
5714 'DoubleRedirects' => 'maintenance',
5715 'BrokenRedirects' => 'maintenance',
5716 'Lonelypages' => 'maintenance',
5717 'Uncategorizedpages' => 'maintenance',
5718 'Uncategorizedcategories' => 'maintenance',
5719 'Uncategorizedimages' => 'maintenance',
5720 'Uncategorizedtemplates' => 'maintenance',
5721 'Unusedcategories' => 'maintenance',
5722 'Unusedimages' => 'maintenance',
5723 'Protectedpages' => 'maintenance',
5724 'Protectedtitles' => 'maintenance',
5725 'Unusedtemplates' => 'maintenance',
5726 'Withoutinterwiki' => 'maintenance',
5727 'Longpages' => 'maintenance',
5728 'Shortpages' => 'maintenance',
5729 'Ancientpages' => 'maintenance',
5730 'Deadendpages' => 'maintenance',
5731 'Wantedpages' => 'maintenance',
5732 'Wantedcategories' => 'maintenance',
5733 'Wantedfiles' => 'maintenance',
5734 'Wantedtemplates' => 'maintenance',
5735 'Unwatchedpages' => 'maintenance',
5736 'Fewestrevisions' => 'maintenance',
5738 'Userlogin' => 'login',
5739 'Userlogout' => 'login',
5740 'CreateAccount' => 'login',
5742 'Recentchanges' => 'changes',
5743 'Recentchangeslinked' => 'changes',
5744 'Watchlist' => 'changes',
5745 'Newimages' => 'changes',
5746 'Newpages' => 'changes',
5748 'Tags' => 'changes',
5750 'Upload' => 'media',
5751 'Listfiles' => 'media',
5752 'MIMEsearch' => 'media',
5753 'FileDuplicateSearch' => 'media',
5754 'Filepath' => 'media',
5756 'Listusers' => 'users',
5757 'Activeusers' => 'users',
5758 'Listgrouprights' => 'users',
5759 'BlockList' => 'users',
5760 'Contributions' => 'users',
5761 'Emailuser' => 'users',
5762 'Listadmins' => 'users',
5763 'Listbots' => 'users',
5764 'Userrights' => 'users',
5766 'Unblock' => 'users',
5767 'Preferences' => 'users',
5768 'ChangeEmail' => 'users',
5769 'ChangePassword' => 'users',
5770 'DeletedContributions' => 'users',
5771 'PasswordReset' => 'users',
5773 'Mostlinked' => 'highuse',
5774 'Mostlinkedcategories' => 'highuse',
5775 'Mostlinkedtemplates' => 'highuse',
5776 'Mostcategories' => 'highuse',
5777 'Mostimages' => 'highuse',
5778 'Mostinterwikis' => 'highuse',
5779 'Mostrevisions' => 'highuse',
5781 'Allpages' => 'pages',
5782 'Prefixindex' => 'pages',
5783 'Listredirects' => 'pages',
5784 'Categories' => 'pages',
5785 'Disambiguations' => 'pages',
5787 'Randompage' => 'redirects',
5788 'Randomredirect' => 'redirects',
5789 'Mypage' => 'redirects',
5790 'Mytalk' => 'redirects',
5791 'Mycontributions' => 'redirects',
5792 'Search' => 'redirects',
5793 'LinkSearch' => 'redirects',
5795 'ComparePages' => 'pagetools',
5796 'Movepage' => 'pagetools',
5797 'MergeHistory' => 'pagetools',
5798 'Revisiondelete' => 'pagetools',
5799 'Undelete' => 'pagetools',
5800 'Export' => 'pagetools',
5801 'Import' => 'pagetools',
5802 'Whatlinkshere' => 'pagetools',
5804 'Statistics' => 'wiki',
5805 'Version' => 'wiki',
5807 'Unlockdb' => 'wiki',
5808 'Allmessages' => 'wiki',
5809 'Popularpages' => 'wiki',
5811 'Specialpages' => 'other',
5812 'Blockme' => 'other',
5813 'Booksources' => 'other',
5814 'JavaScriptTest' => 'other',
5817 /** Whether or not to sort special pages in Special:Specialpages */
5819 $wgSortSpecialPages = true;
5822 * On Special:Unusedimages, consider images "used", if they are put
5823 * into a category. Default (false) is not to count those as used.
5825 $wgCountCategorizedImagesAsUsed = false;
5828 * Maximum number of links to a redirect page listed on
5829 * Special:Whatlinkshere/RedirectDestination
5831 $wgMaxRedirectLinksRetrieved = 500;
5833 /** @} */ # end special pages }
5835 /*************************************************************************//**
5841 * Array of allowed values for the "title=foo&action=<action>" parameter. Syntax is:
5842 * 'foo' => 'ClassName' Load the specified class which subclasses Action
5843 * 'foo' => true Load the class FooAction which subclasses Action
5844 * If something is specified in the getActionOverrides()
5845 * of the relevant Page object it will be used
5846 * instead of the default class.
5847 * 'foo' => false The action is disabled; show an error message
5848 * Unsetting core actions will probably cause things to complain loudly.
5856 'markpatrolled' => true,
5862 'revisiondelete' => true,
5865 'unprotect' => true,
5872 * Array of disabled article actions, e.g. view, edit, delete, etc.
5873 * @deprecated since 1.18; just set $wgActions['action'] = false instead
5875 $wgDisabledActions = array();
5877 /** @} */ # end actions }
5879 /*************************************************************************//**
5880 * @name Robot (search engine crawler) policy
5881 * See also $wgNoFollowLinks.
5886 * Default robot policy. The default policy is to encourage indexing and fol-
5887 * lowing of links. It may be overridden on a per-namespace and/or per-page
5890 $wgDefaultRobotPolicy = 'index,follow';
5893 * Robot policies per namespaces. The default policy is given above, the array
5894 * is made of namespace constants as defined in includes/Defines.php. You can-
5895 * not specify a different default policy for NS_SPECIAL: it is always noindex,
5896 * nofollow. This is because a number of special pages (e.g., ListPages) have
5897 * many permutations of options that display the same data under redundant
5898 * URLs, so search engine spiders risk getting lost in a maze of twisty special
5899 * pages, all alike, and never reaching your actual content.
5903 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
5906 $wgNamespaceRobotPolicies = array();
5909 * Robot policies per article. These override the per-namespace robot policies.
5910 * Must be in the form of an array where the key part is a properly canonical-
5911 * ised text form title and the value is a robot policy.
5915 * $wgArticleRobotPolicies = array(
5916 * 'Main Page' => 'noindex,follow',
5917 * 'User:Bob' => 'index,follow',
5921 * @par Example that DOES NOT WORK because the names are not canonical text
5924 * $wgArticleRobotPolicies = array(
5925 * # Underscore, not space!
5926 * 'Main_Page' => 'noindex,follow',
5927 * # "Project", not the actual project name!
5928 * 'Project:X' => 'index,follow',
5929 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
5930 * 'abc' => 'noindex,nofollow'
5934 $wgArticleRobotPolicies = array();
5937 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
5938 * will not function, so users can't decide whether pages in that namespace are
5939 * indexed by search engines. If set to null, default to $wgContentNamespaces.
5943 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
5946 $wgExemptFromUserRobotsControl = null;
5948 /** @} */ # End robot policy }
5950 /************************************************************************//**
5951 * @name AJAX and API
5952 * Note: The AJAX entry point which this section refers to is gradually being
5953 * replaced by the API entry point, api.php. They are essentially equivalent.
5954 * Both of them are used for dynamic client-side features, via XHR.
5959 * Enable the MediaWiki API for convenient access to
5960 * machine-readable data via api.php
5962 * See http://www.mediawiki.org/wiki/API
5964 $wgEnableAPI = true;
5967 * Allow the API to be used to perform write operations
5968 * (page edits, rollback, etc.) when an authorised user
5971 $wgEnableWriteAPI = true;
5974 * API module extensions.
5975 * Associative array mapping module name to class name.
5976 * Extension modules may override the core modules.
5977 * @todo Describe each of the variables, group them and add examples
5979 $wgAPIModules = array();
5980 $wgAPIMetaModules = array();
5981 $wgAPIPropModules = array();
5982 $wgAPIListModules = array();
5983 $wgAPIGeneratorModules = array();
5986 * Maximum amount of rows to scan in a DB query in the API
5987 * The default value is generally fine
5989 $wgAPIMaxDBRows = 5000;
5992 * The maximum size (in bytes) of an API result.
5993 * @warning Do not set this lower than $wgMaxArticleSize*1024
5995 $wgAPIMaxResultSize = 8388608;
5998 * The maximum number of uncached diffs that can be retrieved in one API
5999 * request. Set this to 0 to disable API diffs altogether
6001 $wgAPIMaxUncachedDiffs = 1;
6004 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
6005 * API request logging
6007 $wgAPIRequestLog = false;
6010 * Set the timeout for the API help text cache. If set to 0, caching disabled
6012 $wgAPICacheHelpTimeout = 60*60;
6015 * Enable AJAX framework
6020 * List of Ajax-callable functions.
6021 * Extensions acting as Ajax callbacks must register here
6023 $wgAjaxExportList = array();
6026 * Enable watching/unwatching pages using AJAX.
6027 * Requires $wgUseAjax to be true too.
6029 $wgAjaxWatch = true;
6032 * Enable AJAX check for file overwrite, pre-upload
6034 $wgAjaxUploadDestCheck = true;
6037 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
6039 $wgAjaxLicensePreview = true;
6042 * Settings for incoming cross-site AJAX requests:
6043 * Newer browsers support cross-site AJAX when the target resource allows requests
6044 * from the origin domain by the Access-Control-Allow-Origin header.
6045 * This is currently only used by the API (requests to api.php)
6046 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
6048 * - '*' matches any number of characters
6049 * - '?' matches any 1 character
6053 * $wgCrossSiteAJAXdomains = array(
6054 * 'www.mediawiki.org',
6055 * '*.wikipedia.org',
6056 * '*.wikimedia.org',
6057 * '*.wiktionary.org',
6061 $wgCrossSiteAJAXdomains = array();
6064 * Domains that should not be allowed to make AJAX requests,
6065 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
6066 * Uses the same syntax as $wgCrossSiteAJAXdomains
6069 $wgCrossSiteAJAXdomainExceptions = array();
6071 /** @} */ # End AJAX and API }
6073 /************************************************************************//**
6074 * @name Shell and process control
6079 * Maximum amount of virtual memory available to shell processes under linux, in KB.
6081 $wgMaxShellMemory = 102400;
6084 * Maximum file size created by shell processes under linux, in KB
6085 * ImageMagick convert for example can be fairly hungry for scratch space
6087 $wgMaxShellFileSize = 102400;
6090 * Maximum CPU time in seconds for shell processes under linux
6092 $wgMaxShellTime = 180;
6095 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
6097 $wgPhpCli = '/usr/bin/php';
6100 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
6101 * For Unix-like operating systems, set this to to a locale that has a UTF-8
6102 * character set. Only the character set is relevant.
6104 $wgShellLocale = 'en_US.utf8';
6106 /** @} */ # End shell }
6108 /************************************************************************//**
6114 * Timeout for HTTP requests done internally
6116 $wgHTTPTimeout = 25;
6119 * Timeout for Asynchronous (background) HTTP requests
6121 $wgAsyncHTTPTimeout = 25;
6124 * Proxy to use for CURL requests.
6126 $wgHTTPProxy = false;
6128 /** @} */ # End HTTP client }
6130 /************************************************************************//**
6132 * See also $wgEnotifUseJobQ.
6137 * Number of jobs to perform per request. May be less than one in which case
6138 * jobs are performed probabalistically. If this is zero, jobs will not be done
6139 * during ordinary apache requests. In this case, maintenance/runJobs.php should
6140 * be run periodically.
6145 * Number of rows to update per job
6147 $wgUpdateRowsPerJob = 500;
6150 * Number of rows to update per query
6152 $wgUpdateRowsPerQuery = 100;
6154 /** @} */ # End job queue }
6156 /************************************************************************//**
6157 * @name HipHop compilation
6162 * The build directory for HipHop compilation.
6163 * Defaults to '$IP/maintenance/hiphop/build'.
6165 $wgHipHopBuildDirectory = false;
6168 * The HipHop build type. Can be either "Debug" or "Release".
6170 $wgHipHopBuildType = 'Debug';
6173 * Number of parallel processes to use during HipHop compilation, or "detect"
6174 * to guess from system properties.
6176 $wgHipHopCompilerProcs = 'detect';
6179 * Filesystem extensions directory. Defaults to $IP/../extensions.
6181 * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
6182 * and use code like:
6184 * require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
6187 * to include the extension setup file from LocalSettings.php. It is not
6188 * necessary to set this variable unless you use MWInit::extensionSetupPath().
6190 $wgExtensionsDirectory = false;
6193 * A list of files that should be compiled into a HipHop build, in addition to
6194 * those listed in $wgAutoloadClasses. Add to this array in an extension setup
6195 * file in order to add files to the build.
6197 * The files listed here must either be either absolute paths under $IP or
6198 * under $wgExtensionsDirectory, or paths relative to the virtual source root
6199 * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
6202 $wgCompiledFiles = array();
6204 /** @} */ # End of HipHop compilation }
6206 /************************************************************************//**
6207 * @name Miscellaneous
6211 /** Name of the external diff engine to use */
6212 $wgExternalDiffEngine = false;
6215 * Disable redirects to special pages and interwiki redirects, which use a 302
6216 * and have no "redirected from" link.
6218 * @note This is only for articles with #REDIRECT in them. URL's containing a
6219 * local interwiki prefix (or a non-canonical special page name) are still hard
6220 * redirected regardless of this setting.
6222 $wgDisableHardRedirects = false;
6225 * LinkHolderArray batch size
6228 $wgLinkHolderBatchSize = 1000;
6231 * By default MediaWiki does not register links pointing to same server in
6232 * externallinks dataset, use this value to override:
6234 $wgRegisterInternalExternals = false;
6237 * Maximum number of pages to move at once when moving subpages with a page.
6239 $wgMaximumMovedPages = 100;
6242 * Fix double redirects after a page move.
6243 * Tends to conflict with page move vandalism, use only on a private wiki.
6245 $wgFixDoubleRedirects = false;
6248 * Allow redirection to another page when a user logs in.
6249 * To enable, set to a string like 'Main Page'
6251 $wgRedirectOnLogin = null;
6254 * Configuration for processing pool control, for use in high-traffic wikis.
6255 * An implementation is provided in the PoolCounter extension.
6257 * This configuration array maps pool types to an associative array. The only
6258 * defined key in the associative array is "class", which gives the class name.
6259 * The remaining elements are passed through to the class as constructor
6264 * $wgPoolCounterConf = array( 'ArticleView' => array(
6265 * 'class' => 'PoolCounter_Client',
6266 * 'timeout' => 15, // wait timeout in seconds
6267 * 'workers' => 5, // maximum number of active threads in each pool
6268 * 'maxqueue' => 50, // maximum number of total threads in each pool
6269 * ... any extension-specific options...
6273 $wgPoolCounterConf = null;
6276 * To disable file delete/restore temporarily
6278 $wgUploadMaintenance = false;
6281 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
6283 $wgEnableSelenium = false;
6284 $wgSeleniumTestConfigs = array();
6285 $wgSeleniumConfigFile = null;
6286 $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
6287 $wgDBtestpassword = '';
6290 * Associative array mapping namespace IDs to the name of the content model pages in that namespace should have by
6291 * default (use the CONTENT_MODEL_XXX constants). If no special content type is defined for a given namespace,
6292 * pages in that namespace will use the CONTENT_MODEL_WIKITEXT (except for the special case of JS and CS pages).
6296 $wgNamespaceContentModels = array();
6299 * How to react if a plain text version of a non-text Content object is requested using ContentHandler::getContentText():
6301 * * 'ignore': return null
6302 * * 'fail': throw an MWException
6303 * * 'serialize': serialize to default format
6307 $wgContentHandlerTextFallback = 'ignore';
6310 * Set to false to disable use of the database fields introduced by the ContentHandler facility.
6311 * This way, the ContentHandler facility can be used without any additional information in the database.
6312 * A page's content model is then derived solely from the page's title. This however means that changing
6313 * a page's default model (e.g. using $wgNamespaceContentModels) will break the page and/or make the content
6314 * inaccessible. This also means that pages can not be moved to a title that would default to a different
6317 * Overall, with $wgContentHandlerUseDB = false, no database updates are needed, but content handling
6318 * is less robust and less flexible.
6322 $wgContentHandlerUseDB = false;
6325 * Determines which types of text are parsed as wikitext. This does not imply that these kinds
6326 * of texts are also rendered as wikitext, it only means that links, magic words, etc will have
6327 * the effect on the database they would have on a wikitext page.
6329 * @todo: On the long run, it would be nice to put categories etc into a separate structure,
6330 * or at least parse only the contents of comments in the scripts.
6334 $wgTextModelsToParse = array(
6335 CONTENT_MODEL_WIKITEXT
, // Just for completeness, wikitext will always be parsed.
6336 CONTENT_MODEL_JAVASCRIPT
, // Make categories etc work, people put them into comments.
6337 CONTENT_MODEL_CSS
, // Make categories etc work, people put them into comments.
6341 * Whether the user must enter their password to change their e-mail address
6345 $wgRequirePasswordforEmailChange = true;
6348 * Register handlers for specific types of sites.
6352 $wgSiteTypes = array();
6353 $wgSiteTypes['mediawiki'] = 'MediaWikiSite';
6356 * For really cool vim folding this needs to be at the end:
6357 * vim: foldmarker=@{,@} foldmethod=marker