If your PHP is configured as a CGI plug-in rather than an Apache module you may
experience problems, as this configuration is not well tested. safe_mode is also
-not tested and unlikely to work.
+not tested and unlikely to work.
If you want math support see the instructions in math/README
******************* WARNING *******************
-REMEMBER: ALWAYS BACK UP YOUR DATABASE BEFORE
+REMEMBER: ALWAYS BACK UP YOUR DATABASE BEFORE
ATTEMPTING TO INSTALL OR UPGRADE!!!
******************* WARNING *******************
-For system requirements, installation and upgrade details, see the files
+For system requirements, installation and upgrade details, see the files
RELEASE-NOTES, INSTALL, and UPGRADE.
== MediaWiki ==
released into the public domain, which does not impair the obligations of users
under the GPL for use of the whole code or other sections thereof.
-MediaWiki makes use of the Sajax Toolkit by modernmethod,
+MediaWiki makes use of the Sajax Toolkit by modernmethod,
http://www.modernmethod.com/sajax/ which has the following license:
'This work is licensed under the Creative Commons Attribution
* } else {
* $wgProfiler['class'] = 'ProfilerStub';
* }
- *
+ *
* Configuration of the profiler output can be done in LocalSettings.php
*/
==== From the web ====
-If you browse to the web-based installation script (usually at
-/mw-config/index.php) from your wiki installation you can follow the script and
+If you browse to the web-based installation script (usually at
+/mw-config/index.php) from your wiki installation you can follow the script and
upgrade your database in place.
==== From the command line ====
If you absolutely cannot make the UTF-8 upgrade work, you can try
doing it by hand: dump your old database, convert the dump file
-using iconv as described here:
+using iconv as described here:
http://portal.suse.com/sdb/en/2004/05/jbartsh_utf-8.html
and then reimport it. You can also convert filenames using convmv,
but note that the old directory hashes will no longer be valid,
* $wgSharedPrefix is the table prefix for the shared database. It defaults to
* $wgDBprefix.
*
- * @deprecated In new code, use the $wiki parameter to wfGetLB() to access
- * remote databases. Using wfGetLB() allows the shared database to reside on
- * separate servers to the wiki's own database, with suitable configuration
+ * @deprecated In new code, use the $wiki parameter to wfGetLB() to access
+ * remote databases. Using wfGetLB() allows the shared database to reside on
+ * separate servers to the wiki's own database, with suitable configuration
* of $wgLBFactoryConf.
*/
$wgSharedDB = null;
/**
* Whether to use a Host header in purge requests sent to the proxy servers
- * configured in $wgSquidServers. Set this to false to support Squid
+ * configured in $wgSquidServers. Set this to false to support Squid
* configured in forward-proxy mode.
*
* If this is set to true, a Host header will be sent, and only the path
* component of the URL will appear on the request line, as if the request
- * were a non-proxy HTTP 1.1 request. Varnish only supports this style of
+ * were a non-proxy HTTP 1.1 request. Varnish only supports this style of
* request. Squid supports this style of request only if reverse-proxy mode
* (http_port ... accel) is enabled.
*
* will be sent in the request line, as is the standard for an HTTP proxy
* request in both HTTP 1.0 and 1.1. This style of request is not supported
* by Varnish, but is supported by Squid in either configuration (forward or
- * reverse).
+ * reverse).
*
* @since 1.21
*/
*
* @file
*/
-
+
/**
- * Base class for general text storage via the "object" flag in old_flags, or
- * two-part external storage URLs. Used for represent efficient concatenated
+ * Base class for general text storage via the "object" flag in old_flags, or
+ * two-part external storage URLs. Used for represent efficient concatenated
* storage, and migration-related pointer objects.
*/
interface HistoryBlob
* @return bool
*/
public function isHappy() {
- return $this->mSize < $this->mMaxSize
+ return $this->mSize < $this->mMaxSize
&& count( $this->mItems ) < $this->mMaxCount;
}
}
/** Total uncompressed size */
var $mSize = 0;
- /**
- * Array of diffs. If a diff D from A to B is notated D = B - A, and Z is
+ /**
+ * Array of diffs. If a diff D from A to B is notated D = B - A, and Z is
* an empty string:
*
* { item[map[i]] - item[map[i-1]] where i > 0
- * diff[i] = {
+ * diff[i] = {
* { item[map[i]] - Z where i = 0
*/
var $mDiffs;
* The maximum number of text items before the object becomes sad
*/
var $mMaxCount = 100;
-
+
/** Constants from xdiff.h */
const XDL_BDOP_INS = 1;
const XDL_BDOP_CPY = 2;
* @throws MWException
*/
function compress() {
- if ( !function_exists( 'xdiff_string_rabdiff' ) ){
+ if ( !function_exists( 'xdiff_string_rabdiff' ) ){
throw new MWException( "Need xdiff 1.5+ support to write DiffHistoryBlob\n" );
}
if ( isset( $this->mDiffs ) ) {
# Pure PHP implementation
$header = unpack( 'Vofp/Vcsize', substr( $diff, 0, 8 ) );
-
+
# Check the checksum if hash/mhash is available
$ofp = $this->xdiffAdler32( $base );
if ( $ofp !== false && $ofp !== substr( $diff, 0, 4 ) ) {
wfDebug( __METHOD__. ": incorrect base length\n" );
return false;
}
-
+
$p = 8;
$out = '';
while ( $p < strlen( $diff ) ) {
}
/**
- * Compute a binary "Adler-32" checksum as defined by LibXDiff, i.e. with
+ * Compute a binary "Adler-32" checksum as defined by LibXDiff, i.e. with
* the bytes backwards and initialised with 0 instead of 1. See bug 34428.
*
* Returns false if no hashing library is available
if ( $init === null ) {
$init = str_repeat( "\xf0", 205 ) . "\xee" . str_repeat( "\xf0", 67 ) . "\x02";
}
- // The real Adler-32 checksum of $init is zero, so it initialises the
- // state to zero, as it is at the start of LibXDiff's checksum
+ // The real Adler-32 checksum of $init is zero, so it initialises the
+ // state to zero, as it is at the start of LibXDiff's checksum
// algorithm. Appending the subject string then simulates LibXDiff.
if ( function_exists( 'hash' ) ) {
$hash = hash( 'adler32', $init . $s, true );
if ( isset( $info['base'] ) ) {
// Old format
$this->mDiffMap = range( 0, count( $this->mDiffs ) - 1 );
- array_unshift( $this->mDiffs,
+ array_unshift( $this->mDiffs,
pack( 'VVCV', 0, 0, self::XDL_BDOP_INSB, strlen( $info['base'] ) ) .
$info['base'] );
} else {
* @return bool
*/
function isHappy() {
- return $this->mSize < $this->mMaxSize
+ return $this->mSize < $this->mMaxSize
&& count( $this->mItems ) < $this->mMaxCount;
}
'class', // html4, html5
'accesskey', // as of html5, multiple space-separated values allowed
// html4-spec doesn't document rel= as space-separated
- // but has been used like that and is now documented as such
+ // but has been used like that and is now documented as such
// in the html5-spec.
'rel',
);
// values. Implode/explode to get those into the main array as well.
if ( is_array( $value ) ) {
// If input wasn't an array, we can skip this step
-
$newValue = array();
foreach ( $value as $k => $v ) {
if ( is_string( $v ) ) {
# @todo FIXME: Is this really true?
$map['<'] = '<';
}
-
$ret .= " $key=$quote" . strtr( $value, $map ) . $quote;
}
}
/**
* Some functions to help implement an external link filter for spam control.
- *
+ *
* @todo implement the filter. Currently these are just some functions to help
* maintenance/cleanupSpam.php remove links to a single specified domain. The
* next thing is to implement functions for checking a given page against a big
// Reverse the labels in the hostname, convert to lower case
// For emails reverse domainpart only
if ( $prot == 'mailto:' && strpos($host, '@') ) {
- // complete email adress
+ // complete email adress
$mailparts = explode( '@', $host );
$domainpart = strtolower( implode( '.', array_reverse( explode( '.', $mailparts[1] ) ) ) );
$host = $domainpart . '@' . $mailparts[0];
$like = array( "$prot$host", $db->anyString() );
} elseif ( $prot == 'mailto:' ) {
// domainpart of email adress only. do not add '.'
- $host = strtolower( implode( '.', array_reverse( explode( '.', $host ) ) ) );
- $like = array( "$prot$host", $db->anyString() );
+ $host = strtolower( implode( '.', array_reverse( explode( '.', $host ) ) ) );
+ $like = array( "$prot$host", $db->anyString() );
} else {
- $host = strtolower( implode( '.', array_reverse( explode( '.', $host ) ) ) );
+ $host = strtolower( implode( '.', array_reverse( explode( '.', $host ) ) ) );
if ( substr( $host, -1, 1 ) !== '.' ) {
$host .= '.';
}
*/
public static function buildRollbackLink( $rev, IContextSource $context = null ) {
global $wgShowRollbackEditCount, $wgMiserMode;
-
+
// To config which pages are effected by miser mode
$disableRollbackEditCountSpecialPage = array( 'Recentchanges', 'Watchlist' );
*/
static function makeBrokenLink( $title, $text = '', $query = '', $trail = '' ) {
wfDeprecated( __METHOD__, '1.16' );
-
+
$nt = Title::newFromText( $title );
if ( $nt instanceof Title ) {
return self::makeBrokenLinkObj( $nt, $text, $query, $trail );
*/
static function makeLinkObj( $nt, $text = '', $query = '', $trail = '', $prefix = '' ) {
# wfDeprecated( __METHOD__, '1.16' ); // See r105985 and it's revert. Somewhere still used.
-
+
wfProfileIn( __METHOD__ );
$query = wfCgiToArray( $query );
list( $inside, $trail ) = self::splitTrail( $trail );
$title, $text = '', $query = '', $trail = '', $prefix = '' , $aprops = '', $style = ''
) {
# wfDeprecated( __METHOD__, '1.16' ); // See r105985 and it's revert. Somewhere still used.
-
+
wfProfileIn( __METHOD__ );
if ( $text == '' ) {
*/
static function makeBrokenLinkObj( $title, $text = '', $query = '', $trail = '', $prefix = '' ) {
wfDeprecated( __METHOD__, '1.16' );
-
+
wfProfileIn( __METHOD__ );
list( $inside, $trail ) = self::splitTrail( $trail );
*/
static function makeColouredLinkObj( $nt, $colour, $text = '', $query = '', $trail = '', $prefix = '' ) {
wfDeprecated( __METHOD__, '1.16' );
-
+
if ( $colour != '' ) {
$style = self::getInternalLinkAttributesObj( $nt, $text, $colour );
} else {
* This is used as a fallback to mime.types files.
* An extensive list of well known mime types is provided by
* the file mime.types in the includes directory.
- *
+ *
* This list concatenated with mime.types is used to create a mime <-> ext
* map. Each line contains a mime type followed by a space separated list of
- * extensions. If multiple extensions for a single mime type exist or if
+ * extensions. If multiple extensions for a single mime type exist or if
* multiple mime types exist for a single extension then in most cases
* MediaWiki assumes that the first extension following the mime type is the
* canonical extension, and the first time a mime type appears for a certain
* extension is considered the canonical mime type.
- *
+ *
* (Note that appending $wgMimeTypeFile to the end of MM_WELL_KNOWN_MIME_TYPES
- * sucks because you can't redefine canonical types. This could be fixed by
+ * sucks because you can't redefine canonical types. This could be fixed by
* appending MM_WELL_KNOWN_MIME_TYPES behind $wgMimeTypeFile, but who knows
* what will break? In practice this probably isn't a problem anyway -- Bryan)
*/
image/gif gif
image/jpeg jpeg jpg jpe
image/png png
-image/svg+xml svg
+image/svg+xml svg
image/svg svg
image/tiff tiff tif
image/vnd.djvu djvu
return self::$instance;
}
- /**
- * Returns a list of file extensions for a given mime type as a space
+ /**
+ * Returns a list of file extensions for a given mime type as a space
* separated string or null if the mime type was unrecognized. Resolves
* mime type aliases.
- *
+ *
* @param $mime string
* @return string|null
*/
return null;
}
- /**
- * Returns a list of mime types for a given file extension as a space
+ /**
+ * Returns a list of mime types for a given file extension as a space
* separated string or null if the extension was unrecognized.
- *
+ *
* @param $ext string
* @return string|null
*/
return $r;
}
- /**
+ /**
* Returns a single mime type for a given file extension or null if unknown.
* This is always the first type from the list returned by getTypesForExtension($ext).
- *
+ *
* @param $ext string
* @return string|null
*/
}
- /**
- * Tests if the extension matches the given mime type. Returns true if a
- * match was found, null if the mime type is unknown, and false if the
+ /**
+ * Tests if the extension matches the given mime type. Returns true if a
+ * match was found, null if the mime type is unknown, and false if the
* mime type is known but no matches where found.
- *
+ *
* @param $extension string
* @param $mime string
* @return bool|null
return in_array( $extension, $ext );
}
- /**
- * Returns true if the mime type is known to represent an image format
+ /**
+ * Returns true if the mime type is known to represent an image format
* supported by the PHP GD library.
*
* @param $mime string
- *
+ *
* @return bool
*/
public function isPHPImageType( $mime ) {
return in_array( strtolower( $extension ), $types );
}
- /**
+ /**
* Improves a mime type using the file extension. Some file formats are very generic,
- * so their mime type is not very meaningful. A more useful mime type can be derived
- * by looking at the file extension. Typically, this method would be called on the
+ * so their mime type is not very meaningful. A more useful mime type can be derived
+ * by looking at the file extension. Typically, this method would be called on the
* result of guessMimeType().
- *
+ *
* Currently, this method does the following:
*
* If $mime is "unknown/unknown" and isRecognizableExtension( $ext ) returns false,
- * return the result of guessTypesForExtension($ext).
+ * return the result of guessTypesForExtension($ext).
*
* If $mime is "application/x-opc+zip" and isMatchingExtension( $ext, $mime )
- * gives true, return the result of guessTypesForExtension($ext).
+ * gives true, return the result of guessTypesForExtension($ext).
*
* @param $mime String: the mime type, typically guessed from a file's content.
* @param $ext String: the file extension, as taken from the file name
public function improveTypeFromExtension( $mime, $ext ) {
if ( $mime === 'unknown/unknown' ) {
if ( $this->isRecognizableExtension( $ext ) ) {
- wfDebug( __METHOD__. ': refusing to guess mime type for .' .
+ wfDebug( __METHOD__. ': refusing to guess mime type for .' .
"$ext file, we should have recognized it\n" );
} else {
- // Not something we can detect, so simply
+ // Not something we can detect, so simply
// trust the file extension
$mime = $this->guessTypesForExtension( $ext );
}
// find the proper mime type for that file extension
$mime = $this->guessTypesForExtension( $ext );
} else {
- wfDebug( __METHOD__. ": refusing to guess better type for $mime file, " .
+ wfDebug( __METHOD__. ": refusing to guess better type for $mime file, " .
".$ext is not a known OPC extension.\n" );
$mime = 'application/zip';
}
return $mime;
}
- /**
- * Mime type detection. This uses detectMimeType to detect the mime type
- * of the file, but applies additional checks to determine some well known
- * file formats that may be missed or misinterpreter by the default mime
- * detection (namely XML based formats like XHTML or SVG, as well as ZIP
+ /**
+ * Mime type detection. This uses detectMimeType to detect the mime type
+ * of the file, but applies additional checks to determine some well known
+ * file formats that may be missed or misinterpreter by the default mime
+ * detection (namely XML based formats like XHTML or SVG, as well as ZIP
* based formats like OPC/ODF files).
*
* @param $file String: the file to check
* @param $ext Mixed: the file extension, or true (default) to extract it from the filename.
- * Set it to false to ignore the extension. DEPRECATED! Set to false, use
+ * Set it to false to ignore the extension. DEPRECATED! Set to false, use
* improveTypeFromExtension($mime, $ext) later to improve mime type.
*
* @return string the mime type of $file
// @todo FIXME: Shouldn't this be rb?
$f = fopen( $file, 'rt' );
wfRestoreWarnings();
-
+
if( !$f ) {
return 'unknown/unknown';
}
return false;
}
-
+
/**
* Detect application-specific file type of a given ZIP file from its
* header data. Currently works for OpenDocument and OpenXML types...
* @param $header String: some reasonably-sized chunk of file header
* @param $tail String: the tail of the file
* @param $ext Mixed: the file extension, or true to extract it from the filename.
- * Set it to false (default) to ignore the extension. DEPRECATED! Set to false,
+ * Set it to false (default) to ignore the extension. DEPRECATED! Set to false,
* use improveTypeFromExtension($mime, $ext) later to improve mime type.
*
* @return string
wfDebug( __METHOD__.": detected $mime from ZIP archive\n" );
} elseif ( preg_match( $openxmlRegex, substr( $header, 30 ) ) ) {
$mime = "application/x-opc+zip";
- # TODO: remove the block below, as soon as improveTypeFromExtension is used everywhere
- if ( $ext !== true && $ext !== false ) {
+ # TODO: remove the block below, as soon as improveTypeFromExtension is used everywhere
+ if ( $ext !== true && $ext !== false ) {
/** This is the mode used by getPropsFromPath
* These mime's are stored in the database, where we don't really want
* x-opc+zip, because we use it only for internal purposes
}
}
wfDebug( __METHOD__.": detected an Open Packaging Conventions archive: $mime\n" );
- } elseif ( substr( $header, 0, 8 ) == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1" &&
+ } elseif ( substr( $header, 0, 8 ) == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1" &&
($headerpos = strpos( $tail, "PK\x03\x04" ) ) !== false &&
preg_match( $openxmlRegex, substr( $tail, $headerpos + 30 ) ) ) {
if ( substr( $header, 512, 4) == "\xEC\xA5\xC1\x00" ) {
$mime = "application/msword";
- }
+ }
switch( substr( $header, 512, 6) ) {
case "\xEC\xA5\xC1\x00\x0E\x00":
case "\xEC\xA5\xC1\x00\x1C\x00":
return $mime;
}
- /**
- * Internal mime type detection. Detection is done using an external
- * program, if $wgMimeDetectorCommand is set. Otherwise, the fileinfo
- * extension and mime_content_type are tried (in this order), if they
- * are available. If the dections fails and $ext is not false, the mime
+ /**
+ * Internal mime type detection. Detection is done using an external
+ * program, if $wgMimeDetectorCommand is set. Otherwise, the fileinfo
+ * extension and mime_content_type are tried (in this order), if they
+ * are available. If the dections fails and $ext is not false, the mime
* type is guessed from the file extension, using guessTypesForExtension.
- *
- * If the mime type is still unknown, getimagesize is used to detect the
- * mime type if the file is an image. If no mime type can be determined,
+ *
+ * If the mime type is still unknown, getimagesize is used to detect the
+ * mime type if the file is an image. If no mime type can be determined,
* this function returns 'unknown/unknown'.
*
* @param $file String: the file to check
* @param $ext Mixed: the file extension, or true (default) to extract it from the filename.
- * Set it to false to ignore the extension. DEPRECATED! Set to false, use
+ * Set it to false to ignore the extension. DEPRECATED! Set to false, use
* improveTypeFromExtension($mime, $ext) later to improve mime type.
*
* @return string the mime type of $file
return $type;
}
- /**
+ /**
* Returns a media code matching the given mime type or file extension.
* File extensions are represented by a string starting with a dot (.) to
* distinguish them from mime types.
* @return int|string
*/
function findMediaType( $extMime ) {
- if ( strpos( $extMime, '.' ) === 0 ) {
+ if ( strpos( $extMime, '.' ) === 0 ) {
// If it's an extension, look up the mime types
$m = $this->getTypesForExtension( substr( $extMime, 1 ) );
if ( !$m ) {
}
/**
- * Get the MIME types that various versions of Internet Explorer would
+ * Get the MIME types that various versions of Internet Explorer would
* detect from a chunk of the content.
*
* @param $fileName String: the file name (unused at present)
// this is a fallback SQL file
$testSqlFile = false;
$testImageZip = false;
-
+
// if we find a request parameter containing the test name, set a cookie with the test name
if ( isset( $_GET['setupTestSuite'] ) ) {
$setupTestSuiteName = $_GET['setupTestSuite'];
true
);
}
-
+
$testIncludes = array(); // array containing all the includes needed for this test
$testGlobalConfigs = array(); // an array containg all the global configs needed for this test
$testResourceFiles = array(); // an array containing all the resource files needed for this test
if ( isset( $testResourceFiles['images'] ) ) {
$testImageZip = $testResourceFiles['images'];
}
-
+
if ( isset( $testResourceFiles['db'] ) ) {
$testSqlFile = $testResourceFiles['db'];
$testResourceName = getTestResourceNameFromTestSuiteName( $setupTestSuiteName );
-
+
switchToTestResources( $testResourceName, false ); // false means do not switch database yet
setupTestResources( $testResourceName, $testSqlFile, $testImageZip );
}
if ( isset( $_GET['clearTestSuite'] ) ) {
$testSuiteName = getTestSuiteNameFromCookie( $cookieName );
- $expire = time() - 600;
+ $expire = time() - 600;
setcookie(
$cookieName,
'',
$wgCookieSecure,
true
);
-
+
$testResourceName = getTestResourceNameFromTestSuiteName( $testSuiteName );
teardownTestResources( $testResourceName );
}
// if a cookie is found, run the appropriate callback to get the config params.
-if ( isset( $_COOKIE[$cookieName] ) ) {
+if ( isset( $_COOKIE[$cookieName] ) ) {
$testSuiteName = getTestSuiteNameFromCookie( $cookieName );
if ( !isset( $wgSeleniumTestConfigs[$testSuiteName] ) ) {
return;
}
-
+
$testIncludes = array(); // array containing all the includes needed for this test
$testGlobalConfigs = array(); // an array containg all the global configs needed for this test
$testResourceFiles = array(); // an array containing all the resource files needed for this test
- $callback = $wgSeleniumTestConfigs[$testSuiteName];
+ $callback = $wgSeleniumTestConfigs[$testSuiteName];
call_user_func_array( $callback, array( &$testIncludes, &$testGlobalConfigs, &$testResourceFiles));
if ( isset( $testResourceFiles['db'] ) ) {
require_once( $file );
}
foreach ( $testGlobalConfigs as $key => $value ) {
- if ( is_array( $value ) ) {
+ if ( is_array( $value ) ) {
$GLOBALS[$key] = array_merge( $GLOBALS[$key], $value );
-
} else {
$GLOBALS[$key] = $value;
}
if ( $testResourceName == '' ) {
die( 'Cannot identify a test the resources should be installed for.' );
}
-
+
// create tables
$dbw = wfGetDB( DB_MASTER );
$dbw->query( 'DROP DATABASE IF EXISTS ' . $testResourceName );
}
/**
- * Get the error message as HTML. This is done by parsing the wikitext error
+ * Get the error message as HTML. This is done by parsing the wikitext error
* message.
*/
public function getHTML( $shortContext = false, $longContext = false ) {
$linkCache = LinkCache::singleton();
$cached = $linkCache->getGoodLinkFieldObj( $this, 'redirect' );
- if ( $cached === null ) {
+ if ( $cached === null ) {
// TODO: check the assumption that the cache actually knows about this title
// and handle this, such as get the title from the database.
// See https://bugzilla.wikimedia.org/show_bug.cgi?id=37209
}
/**
- * Add this existing user object to the database. If the user already
- * exists, a fatal status object is returned, and the user object is
+ * Add this existing user object to the database. If the user already
+ * exists, a fatal status object is returned, and the user object is
* initialised with the data from the database.
*
* Previously, this function generated a DB error due to a key conflict
* }
* // do something with $user...
*
- * However, this was vulnerable to a race condition (bug 16020). By
+ * However, this was vulnerable to a race condition (bug 16020). By
* initialising the user object if the user exists, we aim to support this
* calling sequence as far as possible.
*
* Note that if the user exists, this function will acquire a write lock,
- * so it is still advisable to make the call conditional on isLoggedIn(),
+ * so it is still advisable to make the call conditional on isLoggedIn(),
* and to commit the transaction after calling.
*
* @return Status
array( 'IGNORE' )
);
if ( !$dbw->affectedRows() ) {
- $this->mId = $dbw->selectField( 'user', 'user_id',
+ $this->mId = $dbw->selectField( 'user', 'user_id',
array( 'user_name' => $this->mName ), __METHOD__ );
$loaded = false;
if ( $this->mId ) {
* 'DBprefix' => '',
* );
*
- * All fields must be present. These mean the same things as $wgDBtype,
- * $wgDBserver, etc. This implementation is quite crude; it could easily
- * support multiple database servers, for instance, and memcached, and it
- * probably has bugs. Kind of hard to reuse code when things might rely on who
+ * All fields must be present. These mean the same things as $wgDBtype,
+ * $wgDBserver, etc. This implementation is quite crude; it could easily
+ * support multiple database servers, for instance, and memcached, and it
+ * probably has bugs. Kind of hard to reuse code when things might rely on who
* knows what configuration globals.
*
- * If either wiki uses the UserComparePasswords hook, password authentication
- * might fail unexpectedly unless they both do the exact same validation.
- * There may be other corner cases like this where this will fail, but it
+ * If either wiki uses the UserComparePasswords hook, password authentication
+ * might fail unexpectedly unless they both do the exact same validation.
+ * There may be other corner cases like this where this will fail, but it
* should be unlikely.
*
* @ingroup ExternalUser
* @return bool
*/
protected function initFromName( $name ) {
- # We might not need the 'usable' bit, but let's be safe. Theoretically
- # this might return wrong results for old versions, but it's probably
+ # We might not need the 'usable' bit, but let's be safe. Theoretically
+ # this might return wrong results for old versions, but it's probably
# good enough.
$name = User::getCanonicalName( $name, 'usable' );
}
public function authenticate( $password ) {
- # This might be wrong if anyone actually uses the UserComparePasswords hook
+ # This might be wrong if anyone actually uses the UserComparePasswords hook
# (on either end), so don't use this if you those are incompatible.
return User::comparePasswords( $this->mRow->user_password, $password,
- $this->mRow->user_id );
+ $this->mRow->user_id );
}
public function getPref( $pref ) {
- # @todo FIXME: Return other prefs too. Lots of global-riddled code that does
+ # @todo FIXME: Return other prefs too. Lots of global-riddled code that does
# this normally.
if ( $pref === 'emailaddress'
&& $this->row->user_email_authenticated !== null ) {
/**
* Guess the MIME type from the file contents alone
- *
- * @return string
+ *
+ * @return string
*/
public function getMimeType() {
return MimeMagic::singleton()->guessMimeType( $this->path, false );
/**
* Get the final file extension from a file system path
- *
+ *
* @param $path string
* @return string
*/
/**
* A repository for files accessible via the local filesystem.
* Does not support database access or registration.
- *
+ *
* This is a mostly a legacy class. New uses should not be added.
- *
+ *
* @ingroup FileRepo
* @deprecated since 1.19
*/
/**
* Get a key on the primary cache for this repository.
- * Returns false if the repository's cache is not accessible at this site.
+ * Returns false if the repository's cache is not accessible at this site.
* The parameters are the parts of the key, as for wfMemcKey().
* @return bool|mixed
*/
/**
* Get a key on the primary cache for this repository.
- * Returns false if the repository's cache is not accessible at this site.
+ * Returns false if the repository's cache is not accessible at this site.
* The parameters are the parts of the key, as for wfMemcKey().
* @return bool|string
*/
__METHOD__,
array( 'ORDER BY' => 'img_name' )
);
-
+
$result = array();
foreach ( $res as $row ) {
$result[] = $this->newFileFromRow( $row );
/**
* Get a key on the primary cache for this repository.
- * Returns false if the repository's cache is not accessible at this site.
+ * Returns false if the repository's cache is not accessible at this site.
* The parameters are the parts of the key, as for wfMemcKey().
*
* @return string
/** Associative array mapping module name to info associative array */
protected $moduleInfos = array();
-
+
/** Associative array mapping framework ids to a list of names of test suite modules */
/** like array( 'qunit' => array( 'mediawiki.tests.qunit.suites', 'ext.foo.tests', .. ), .. ) */
protected $testModuleNames = array();
public function getModuleNames() {
return array_keys( $this->moduleInfos );
}
-
+
/**
* Get a list of test module names for one (or all) frameworks.
* If the given framework id is unknkown, or if the in-object variable is not an array,
* NOTE: The mtime of the module's messages is NOT automatically included.
* If you want this to happen, you'll need to call getMsgBlobMtime()
* yourself and take its result into consideration.
- *
+ *
* @param $context ResourceLoaderContext: Context object
* @return Integer: UNIX timestamp
*/
/**
* Gets group name
- *
+ *
* @return String: Name of group
*/
public function getGroup() {
'MediaWiki:Print.css' => array( 'type' => 'style', 'media' => 'print' ),
);
if ( $wgHandheldStyle ) {
- $pages['MediaWiki:Handheld.css'] = array(
- 'type' => 'style',
+ $pages['MediaWiki:Handheld.css'] = array(
+ 'type' => 'style',
'media' => 'handheld' );
}
return $pages;
/**
* Gets group name
- *
+ *
* @return String: Name of group
*/
public function getGroup() {
global $wgUser;
return $this->modifiedTime[$hash] = wfTimestamp( TS_UNIX, $wgUser->getTouched() );
}
-
+
/**
* @param $context ResourceLoaderContext
* @return array