LocalSettings.sample

   1 <?php
   2 # Local settings work like this: the file LocalSettings.sample
   3 # should be copied to LocalSettings.php in the source directory
   4 # and edited for your local file system settings and software
   5 # configuration preferences. The install script will copy it to
   6 # the installation path, but a copy should also remain in the
   7 # source tree so that maintenance scripts can refer to it (you
   8 # may want to make it a symbolic link after installation).
   9
  10 # Developers: Do not check LocalSettings.php into CVS! Make
  11 # changes to LocalSettings.sample instead.
  12
  13 # Note that you will find many more settings in
  14 # includes/DefaultSettings.php - if you want to change any of
  15 # them, copy the variables into LocalSettings.php, and change them
  16 # here, otherwise your settings will be overwritten with your
  17 # next update.
  18
  19 # You can get some useful informations online at:
  20 # http://meta.wikipedia.org/wiki/LocalSettings.php
  21
  22
  23 # The most important setting is here: $IP is the installation
  24 # path for the software. In the example below, the htdocs
  25 # dir should be set as the DocumentRoot in the httpd.conf
  26 # configuration file of Apache. To put it more simply:
  27 # The directory below needs to be accessible in some way
  28 # through your web browser.
  29 #
  30 $IP = "/usr/local/apache/htdocs/wiki";
  31
  32
  33 ## Don't change this bit; install.php needs it.
  34 #
  35 if ( ! isset( $DP ) ) { $DP = $IP; }
  36 include_once( "$DP/DefaultSettings.php" );
  37
  38 ## Please customize!
  39 #
  40 $wgSitename         = "MediaWiki";
  41
  42 # You can customize a lot of URLs and paths, but you will
  43 # almost certainly want to customize the following.  The
  44
  45 # Normally the server will be auto-detected, but you can
  46 # force the base URL. Don't forget http:// (or https://)!
  47 # If you are running php as CGI, the $_SERVER variable might
  48 # not be set, you will then need to manually set $wgServer
  49 #
  50 #$wgServer           = "http://www.myhost.com";
  51
  52 ## The location of the main script, you need this to be correct!
  53 #
  54 $wgScriptPath       = "/wiki";
  55 $wgScript           = "{$wgScriptPath}/index.php";
  56 $wgRedirectScript   = "{$wgScriptPath}/redirect.php";
  57
  58 # ArticlePath one is especially useful if you want to use
  59 # mod_redirect to make page-viewing URLs look static.
  60 #
  61 $wgArticlePath      = "{$wgScript}/$1";
  62 # $wgArticlePath     = "/wiki/$1"; # Prettier if you're setup for it
  63
  64 ## Normally you don't need to change these once the above are set...
  65 #
  66 $wgStylePath   = "{$wgScriptPath}/style";
  67 $wgStyleSheetDirectory = "{$IP}/style";
  68
  69 $wgUploadPath       = "{$wgScriptPath}/upload";
  70 $wgUploadDirectory      = "{$IP}/upload";
  71 $wgLogo                         = "{$wgStylePath}/images/wiki.png";
  72
  73 ## Preferably these addresses should be able to receive mail asking for help
  74 #
  75 $wgEmergencyContact = "wikiadmin@" . getenv( "SERVER_NAME" );
  76 $wgPasswordSender       = "Wikipedia Mail <apache@" . getenv( "SERVER_NAME" ) . ">";
  77
  78 # MySQL settings
  79 #
  80 # The user you specify here DOES NOT NEED TO EXIST.
  81 # It is created by the installation script, if
  82 # you have root privileges on your database.
  83 #
  84 # IF on the other hand you have only limited privs
  85 # on your DB and have to do a manual install, use
  86 # your existing username and password. Be sure this
  87 # file doesn't get left around on the web legible...
  88 #
  89 # $wgDBsqluser is used for queries through the
  90 # web interface. It is also created by the script.
  91 # Unlike the regular user, it has no write
  92 # permissions and can not access passwords.
  93 #
  94 $wgDBserver         = "localhost";
  95 $wgDBname           = "wikidb";
  96 $wgDBuser           = "wikiuser";
  97 $wgDBpassword       = "userpass"; # Use a better password! ;)
  98 $wgDBsqluser        = "sqluser";
  99 $wgDBsqlpassword        = "sqlpass";
 100
 101 ## Advanced DB settings
 102 #
 103 $wgDBminWordLen         = 3;     # Match this to your MySQL fulltext
 104
 105 ## Set these to true to turn on some optimizations when using
 106 ## MySQL 4.x:
 107 #
 108 # $wgDBmysql4                   = true;
 109 # $wgEnablePersistentLC = true;
 110
 111 ## You can customize the interface messages through the wiki;
 112 ## see [[MediaWiki:All pages]]. (This requires a sysop account.)
 113 ## This causes a performance hit, though; if you don't need it,
 114 ## feel free to turn it off:
 115 #
 116 # $wgUseDatabaseMessages = false;
 117
 118 ## Set $wgUseImageResize to true if you want to enable dynamic
 119 ## server side image resizing ("Thumbnails")
 120 #
 121 # $wgUseImageResize             = true;
 122
 123 ## Resizing can be done using PHP's internal image libraries
 124 ## or using ImageMagick. The later supports more file formats
 125 ## than PHP, which only supports PNG, GIF, JPG, XBM and WBMP.
 126 ##
 127 ## Set $wgUseImageMagick to true to use Image Magick instead
 128 ## of the builtin functions
 129 #
 130 # $wgUseImageMagick             = true;
 131 # $wgImageMagickConvertCommand    = "/usr/bin/convert";
 132
 133 ## If you have the appropriate support software installed
 134 ## you can enable inline LaTeX equations:
 135 # $wgUseTeX                     = true;
 136 # $wgMathPath         = "{$wgUploadPath}/math";
 137 # $wgMathDirectory    = "{$wgUploadDirectory}/math";
 138 # $wgTmpDirectory     = "{$wgUploadDirectory}/tmp";
 139
 140 $wgLocalInterwiki   = $wgSitename;
 141
 142 ## If you want a non-English wiki, add a line like this
 143 # $wgLanguageCode = "de";
 144
 145 ## Character encoding: normally auto-selected by the language.
 146 ## English, German, Danish, Dutch, French, Spanish, and Swedish
 147 ## will be in ISO-8859-1 by default, all other languages in
 148 ## UTF-8 encoding. UTF-8 is more flexible, but some older browsers
 149 ## have trouble with it. You can force an English-language wiki
 150 ## to UTF-8 by uncommenting the lines below. The other languages
 151 ## mentioned above might not work properly this way without
 152 ## additional tweaking.
 153 #
 154 # $wgInputEncoding      = "UTF-8";
 155 # $wgOutputEncoding     = "UTF-8";
 156
 157 ## Default skin: you can change the default skin. Use the internal symbolic
 158 ## names, ie 'standard', 'nostalgia', 'cologneblue', 'monobook':
 159 # $wgDefaultSkin = 'monobook';
 160
 161 ## Extremely high-traffic wikis may want to disable
 162 ## some database-intensive features here:
 163 #
 164 # $wgDisableTextSearch = true;
 165 # $wgDisableCounters = true;
 166 # $wgMiserMode          = true;
 167
 168 ## The following three config variables are used to define
 169 ## the rights of users in your system.
 170 #
 171 # If wgWhitelistEdit is set to true, only logged in users
 172 # are allowed to edit articles.
 173 # If wgWhitelistRead is set to an array of page names, only logged in users
 174 # are allowed to read pages *not in the list*.
 175 #
 176 # wgWhitelistAccount lists user types that can add user accounts:
 177 # "key" => 1 defines permission if user has right "key".
 178 #
 179 # Typical setups are:
 180 #
 181 # Everything goes (this is the default behaviour):
 182 # $wgWhitelistEdit = false;
 183 # $wgWhitelistRead = false;
 184 # $wgWhitelistAccount = array ( "user" => 1, "sysop" => 1, "developer" => 1 );
 185 #
 186 # Invitation-only closed shop type of system
 187 # $wgWhitelistEdit = true;
 188 # $wgWhitelistRead = array ( ":Main_Page" );
 189 # $wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
 190 #
 191 # Public website, closed editorial team
 192 # $wgWhitelistEdit = true;
 193 # $wgWhitelistRead = false;
 194 # $wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
 195
 196
 197 # Squid-related settings
 198 #
 199 # Enable/disable Squid
 200 # $wgUseSquid = true;
 201 # If you run Squid3 with ESI support, enable this (default:false):
 202 # $wgUseESI = true;
 203 # Internal server name as known to Squid, if different
 204 # $wgInternalServer = 'http://yourinternal.tld:8000';
 205 # Cache timeout for the squid, will be sent as s-maxage (without ESI) or
 206 # Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in the Squid config.
 207 # 18000 seconds = 5 hours, more cache hits with 2678400 = 31 days
 208 # $wgSquidMaxage = 18000;
 209 # A list of proxy servers (ips if possible) to purge on changes
 210 # don't specify ports here (80 is default)
 211 # $wgSquidServers = array('127.0.0.1');
 212 ?>