7 * To customize your installation, edit "LocalSettings.php". If you make
8 * changes here, they will be lost on next upgrade of MediaWiki!
10 * Note that since all these string interpolations are expanded
11 * before LocalSettings is included, if you localize something
12 * like $wgScriptPath, you must also localize everything that
15 * Documentation is in the source and on:
16 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 # This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
21 if( !defined( 'MEDIAWIKI' ) ) {
22 echo "This file is part of MediaWiki and is not a valid entry point\n";
27 * Create a site configuration object
28 * Not used for much in a default install
30 if ( !defined( 'MW_PHP4' ) ) {
31 require_once( "$IP/includes/SiteConfiguration.php" );
32 $wgConf = new SiteConfiguration
;
35 /** MediaWiki version number */
36 $wgVersion = '1.17alpha';
38 /** Name of the site. It must be changed in LocalSettings.php */
39 $wgSitename = 'MediaWiki';
42 * Name of the project namespace. If left set to false, $wgSitename will be
45 $wgMetaNamespace = false;
48 * Name of the project talk namespace.
50 * Normally you can ignore this and it will be something like
51 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
52 * manually for grammatical reasons. It is currently only respected by those
53 * languages where it might be relevant and where no automatic grammar converter
56 $wgMetaNamespaceTalk = false;
59 /** URL of the server. It will be automatically built including https mode */
62 if( isset( $_SERVER['SERVER_NAME'] ) ) {
63 $wgServerName = $_SERVER['SERVER_NAME'];
64 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
65 $wgServerName = $_SERVER['HOSTNAME'];
66 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
67 $wgServerName = $_SERVER['HTTP_HOST'];
68 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
69 $wgServerName = $_SERVER['SERVER_ADDR'];
71 $wgServerName = 'localhost';
74 # check if server use https:
75 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
77 $wgServer = $wgProto.'://' . $wgServerName;
78 # If the port is a non-standard one, add it to the URL
79 if( isset( $_SERVER['SERVER_PORT'] )
80 && !strpos( $wgServerName, ':' )
81 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
82 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
84 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
122 * Script users will request to get articles
123 * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
124 * LocalSettings.php is correctly set!
126 * Will be set based on $wgScriptPath in Setup.php if not overridden in
127 * LocalSettings.php. Generally you should not need to change this unless you
128 * don't like seeing "index.php".
130 $wgScriptExtension = '.php'; ///< extension to append to script names by default
131 $wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
132 $wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
139 * If you do override them, be sure to set them all!
141 * These will relatively rarely need to be set manually, unless you are
142 * splitting style sheets or images outside the main document root.
145 * asset paths as seen by users
147 $wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
148 $wgExtensionAssetsPath = false; ///< defaults to "{$wgScriptPath}/extensions"
151 * filesystem stylesheets directory
153 $wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
154 $wgStyleSheetPath = &$wgStylePath;
155 $wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
156 $wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
157 $wgUploadDirectory = false; ///< defaults to "{$IP}/images"
158 $wgHashedUploadDirectory = true;
159 $wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
160 $wgFavicon = '/favicon.ico';
161 $wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
162 $wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
163 $wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
164 $wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
165 $wgUploadBaseUrl = "";
169 * Directory for caching data in the local filesystem. Should not be accessible
170 * from the web. Set this to false to not use any local caches.
172 * Note: if multiple wikis share the same localisation cache directory, they
173 * must all have the same set of extensions. You can set a directory just for
174 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
176 $wgCacheDirectory = false;
179 * Default value for chmoding of new directories.
181 $wgDirectoryMode = 0777;
184 * New file storage paths; currently used only for deleted files.
187 * $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
190 $wgFileStore = array();
191 $wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
192 $wgFileStore['deleted']['url'] = null; ///< Private
193 $wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
195 $wgImgAuthDetails = false; ///< defaults to false - only set to true if you use img_auth and want the user to see details on why access failed
196 $wgImgAuthPublicTest = true; ///< defaults to true - if public read is turned on, no need for img_auth, config error unless other access is used
199 * File repository structures
201 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
202 * an array of such structures. Each repository structure is an associative
203 * array of properties configuring the repository.
205 * Properties required for all repos:
206 * class The class name for the repository. May come from the core or an extension.
207 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
209 * name A unique name for the repository.
211 * For most core repos:
212 * url Base public URL
213 * hashLevels The number of directory levels for hash-based division of files
214 * thumbScriptUrl The URL for thumb.php (optional, not recommended)
215 * transformVia404 Whether to skip media file transformation on parse and rely on a 404
217 * initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
218 * determines whether filenames implicitly start with a capital letter.
219 * The current implementation may give incorrect description page links
220 * when the local $wgCapitalLinks and initialCapital are mismatched.
221 * pathDisclosureProtection
222 * May be 'paranoid' to remove all parameters from error messages, 'none' to
223 * leave the paths in unchanged, or 'simple' to replace paths with
224 * placeholders. Default for LocalRepo is 'simple'.
225 * fileMode This allows wikis to set the file mode when uploading/moving files. Default
227 * directory The local filesystem directory where public files are stored. Not used for
229 * thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
230 * thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
233 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
234 * for local repositories:
235 * descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
236 * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
237 * http://en.wikipedia.org/w
239 * articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
240 * fetchDescription Fetch the text of the remote file description page. Equivalent to
241 * $wgFetchCommonsDescriptions.
244 * dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
245 * equivalent to the corresponding member of $wgDBservers
246 * tablePrefix Table prefix, the foreign wiki's $wgDBprefix
247 * hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
250 * apibase Use for the foreign API's URL
251 * apiThumbCacheExpiry How long to locally cache thumbs for
253 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
254 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
256 $wgLocalFileRepo = false;
257 $wgForeignFileRepos = array();
261 * Use Commons as a remote file repository. Essentially a wrapper, when this
262 * is enabled $wgForeignFileRepos will point at Commons with a set of default
265 $wgUseInstantCommons = false;
268 * Allowed title characters -- regex character class
269 * Don't change this unless you know what you're doing
271 * Problematic punctuation:
272 * []{}|# Are needed for link syntax, never enable these
273 * <> Causes problems with HTML escaping, don't use
274 * % Enabled by default, minor problems with path to query rewrite rules, see below
275 * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
276 * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
278 * All three of these punctuation problems can be avoided by using an alias, instead of a
279 * rewrite rule of either variety.
281 * The problem with % is that when using a path to query rewrite rule, URLs are
282 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
283 * %253F, for example, becomes "?". Our code does not double-escape to compensate
284 * for this, indeed double escaping would break if the double-escaped title was
285 * passed in the query string rather than the path. This is a minor security issue
286 * because articles can be created such that they are hard to view or edit.
288 * In some rare cases you may wish to remove + for compatibility with old links.
290 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
291 * this breaks interlanguage links
293 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
294 $wgIllegalFileChars = ":"; // These are additional characters that should be replaced with '-' in file names
298 * The external URL protocols
300 $wgUrlProtocols = array(
306 'telnet://', // Well if we're going to support the above.. -ævar
307 'nntp://', // @bug 3808 RFC 1738
316 /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
317 * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
321 /** Configuration for different virus scanners. This an associative array of associative arrays:
322 * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
323 * valid values for $wgAntivirus are the keys defined in this array.
325 * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
327 * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
328 * file to scan. If not present, the filename will be appended to the command. Note that this must be
329 * overwritten if the scanner is not in the system path; in that case, plase set
330 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
332 * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
333 * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
334 * the file if $wgAntivirusRequired is not set.
335 * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
336 * which is probably imune to virusses. This causes the file to pass.
337 * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
338 * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
339 * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
341 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
342 * output. The relevant part should be matched as group one (\1).
343 * If not defined or the pattern does not match, the full message is shown to the user.
345 $wgAntivirusSetup = array(
349 'command' => "clamscan --no-summary ",
352 "0" => AV_NO_VIRUS
, # no virus
353 "1" => AV_VIRUS_FOUND
, # virus found
354 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
355 "*" => AV_SCAN_FAILED
, # else scan failed
358 'messagepattern' => '/.*?:(.*)/sim',
363 'command' => "f-prot ",
366 "0" => AV_NO_VIRUS
, # no virus
367 "3" => AV_VIRUS_FOUND
, # virus found
368 "6" => AV_VIRUS_FOUND
, # virus found
369 "*" => AV_SCAN_FAILED
, # else scan failed
372 'messagepattern' => '/.*?Infection:(.*)$/m',
377 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
378 $wgAntivirusRequired= true;
380 /** Determines if the mime type of uploaded files should be checked */
381 $wgVerifyMimeType= true;
383 /** Sets the mime type definition file to use by MimeMagic.php. */
384 $wgMimeTypeFile= "includes/mime.types";
385 #$wgMimeTypeFile= "/etc/mime.types";
386 #$wgMimeTypeFile= null; #use built-in defaults only.
388 /** Sets the mime type info file to use by MimeMagic.php. */
389 $wgMimeInfoFile= "includes/mime.info";
390 #$wgMimeInfoFile= null; #use built-in defaults only.
392 /** Switch for loading the FileInfo extension by PECL at runtime.
393 * This should be used only if fileinfo is installed as a shared object
394 * or a dynamic libary
396 $wgLoadFileinfoExtension= false;
398 /** Sets an external mime detector program. The command must print only
399 * the mime type to standard output.
400 * The name of the file to process will be appended to the command given here.
401 * If not set or NULL, mime_content_type will be used if available.
403 $wgMimeDetectorCommand= null; # use internal mime_content_type function, available since php 4.3.0
404 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
406 /** Switch for trivial mime detection. Used by thumb.php to disable all fance
407 * things, because only a few types of images are needed and file extensions
410 $wgTrivialMimeDetection= false;
413 * Additional XML types we can allow via mime-detection.
414 * array = ( 'rootElement' => 'associatedMimeType' )
416 $wgXMLMimeTypes = array(
417 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
418 'svg' => 'image/svg+xml',
419 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
420 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
421 'html' => 'text/html', // application/xhtml+xml?
425 * To set 'pretty' URL paths for actions other than
426 * plain page views, add to this array. For instance:
427 * 'edit' => "$wgScriptPath/edit/$1"
429 * There must be an appropriate script or rewrite rule
430 * in place to handle these URLs.
432 $wgActionPaths = array();
435 * If you operate multiple wikis, you can define a shared upload path here.
436 * Uploads to this wiki will NOT be put there - they will be put into
437 * $wgUploadDirectory.
438 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
439 * no file of the given name is found in the local repository (for [[Image:..]],
440 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
443 * Note that these configuration settings can now be defined on a per-
444 * repository basis for an arbitrary number of file repositories, using the
445 * $wgForeignFileRepos variable.
447 $wgUseSharedUploads = false;
448 /** Full path on the web server where shared uploads can be found */
449 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
450 /** Fetch commons image description pages and display them on the local wiki? */
451 $wgFetchCommonsDescriptions = false;
452 /** Path on the file system where shared uploads can be found. */
453 $wgSharedUploadDirectory = "/var/www/wiki3/images";
454 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
455 $wgSharedUploadDBname = false;
456 /** Optional table prefix used in database. */
457 $wgSharedUploadDBprefix = '';
458 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
459 $wgCacheSharedUploads = true;
461 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
462 * The timeout for copy uploads is set by $wgHTTPTimeout.
464 $wgAllowCopyUploads = false;
467 * Max size for uploads, in bytes. Currently only works for uploads from URL
468 * via CURL (see $wgAllowCopyUploads). The only way to impose limits on
469 * normal uploads is currently to edit php.ini.
471 $wgMaxUploadSize = 1024*1024*100; # 100MB
474 * Point the upload navigation link to an external URL
475 * Useful if you want to use a shared repository by default
476 * without disabling local uploads (use $wgEnableUploads = false for that)
477 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
479 * This also affects images inline images that do not exist. In that case the URL will get
480 * (?|&)wpDestFile=<filename> appended to it as appropriate.
482 $wgUploadNavigationUrl = false;
485 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
486 * generating them on render and outputting a static URL. This is necessary if some of your
487 * apache servers don't have read/write access to the thumbnail path.
490 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
492 $wgThumbnailScriptPath = false;
493 $wgSharedThumbnailScriptPath = false;
496 * Set the following to false especially if you have a set of files that need to
497 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
500 $wgHashedSharedUploadDirectory = true;
503 * Base URL for a repository wiki. Leave this blank if uploads are just stored
504 * in a shared directory and not meant to be accessible through a separate wiki.
505 * Otherwise the image description pages on the local wiki will link to the
506 * image description page on this wiki.
508 * Please specify the namespace, as in the example below.
510 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
517 * Site admin email address
518 * Default to wikiadmin@SERVER_NAME
520 $wgEmergencyContact = 'wikiadmin@' . $wgServerName;
523 * Password reminder email address
524 * The address we should use as sender when a user is requesting his password
525 * Default to apache@SERVER_NAME
527 $wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
530 * dummy address which should be accepted during mail send action
531 * It might be necessay to adapt the address or to set it equal
532 * to the $wgEmergencyContact address
534 #$wgNoReplyAddress = $wgEmergencyContact;
535 $wgNoReplyAddress = 'reply@not.possible';
538 * Set to true to enable the e-mail basic features:
539 * Password reminders, etc. If sending e-mail on your
540 * server doesn't work, you might want to disable this.
542 $wgEnableEmail = true;
545 * Set to true to enable user-to-user e-mail.
546 * This can potentially be abused, as it's hard to track.
548 $wgEnableUserEmail = true;
551 * Set to true to put the sending user's email in a Reply-To header
552 * instead of From. ($wgEmergencyContact will be used as From.)
554 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
555 * which can cause problems with SPF validation and leak recipient addressses
556 * when bounces are sent to the sender.
558 $wgUserEmailUseReplyTo = false;
561 * Minimum time, in hours, which must elapse between password reminder
562 * emails for a given account. This is to prevent abuse by mail flooding.
564 $wgPasswordReminderResendTime = 24;
567 * The time, in seconds, when an emailed temporary password expires.
569 $wgNewPasswordExpiry = 3600 * 24 * 7;
573 * For using a direct (authenticated) SMTP server connection.
574 * Default to false or fill an array :
576 * "host" => 'SMTP domain',
577 * "IDHost" => 'domain for MessageID',
579 * "auth" => true/false,
580 * "username" => user,
581 * "password" => password
590 /** database host name or ip address */
591 $wgDBserver = 'localhost';
592 /** database port number (for PostgreSQL) */
594 /** name of the database */
595 $wgDBname = 'my_wiki';
597 $wgDBconnection = '';
598 /** Database username */
599 $wgDBuser = 'wikiuser';
600 /** Database user's password */
605 /** Separate username and password for maintenance tasks. Leave as null to use the default */
606 $wgDBadminuser = null;
607 $wgDBadminpassword = null;
610 * Leave as null to select the default search engine for the
611 * selected database type (eg SearchMySQL), or set to a class
612 * name to override to a custom search engine.
614 $wgSearchType = null;
616 /** Table name prefix */
618 /** MySQL table options to use during installation or update */
619 $wgDBTableOptions = 'ENGINE=InnoDB';
621 /** Mediawiki schema */
622 $wgDBmwschema = 'mediawiki';
623 /** Tsearch2 schema */
624 $wgDBts2schema = 'public';
626 /** To override default SQLite data directory ($docroot/../data) */
627 $wgSQLiteDataDir = '';
629 /** Default directory mode for SQLite data directory on creation.
630 * Note that this is different from the default directory mode used
633 $wgSQLiteDataDirMode = 0700;
636 * Make all database connections secretly go to localhost. Fool the load balancer
637 * thinking there is an arbitrarily large cluster of servers to connect to.
638 * Useful for debugging.
640 $wgAllDBsAreLocalhost = false;
645 * Shared database for multiple wikis. Commonly used for storing a user table
646 * for single sign-on. The server for this database must be the same as for the
648 * For backwards compatibility the shared prefix is set to the same as the local
649 * prefix, and the user table is listed in the default list of shared tables.
650 * The user_properties table is also added so that users will continue to have their
651 * preferences shared (preferences were stored in the user table prior to 1.16)
653 * $wgSharedTables may be customized with a list of tables to share in the shared
654 * datbase. However it is advised to limit what tables you do share as many of
655 * MediaWiki's tables may have side effects if you try to share them.
659 $wgSharedPrefix = false; # Defaults to $wgDBprefix
660 $wgSharedTables = array( 'user', 'user_properties' );
663 * Database load balancer
664 * This is a two-dimensional array, an array of server info structures
667 * dbname: Default database name
669 * password: DB password
670 * type: "mysql" or "postgres"
671 * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
672 * groupLoads: array of load ratios, the key is the query group name. A query may belong
673 * to several groups, the most specific group defined here is used.
676 * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
677 * DBO_DEBUG -- equivalent of $wgDebugDumpSql
678 * DBO_TRX -- wrap entire request in a transaction
679 * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
680 * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
682 * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
683 * max threads: (optional) Maximum number of running threads
685 * These and any other user-defined properties will be assigned to the mLBInfo member
686 * variable of the Database object.
688 * Leave at false to use the single-server variables above. If you set this
689 * variable, the single-server variables will generally be ignored (except
690 * perhaps in some command-line scripts).
692 * The first server listed in this array (with key 0) will be the master. The
693 * rest of the servers will be slaves. To prevent writes to your slaves due to
694 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
695 * slaves in my.cnf. You can set read_only mode at runtime using:
699 * Since the effect of writing to a slave is so damaging and difficult to clean
700 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
701 * our masters, and then set read_only=0 on masters at runtime.
703 $wgDBservers = false;
706 * Load balancer factory configuration
707 * To set up a multi-master wiki farm, set the class here to something that
708 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
709 * The class identified here is responsible for reading $wgDBservers,
710 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
712 * The LBFactory_Multi class is provided for this purpose, please see
713 * includes/db/LBFactory_Multi.php for configuration information.
715 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
717 /** How long to wait for a slave to catch up to the master */
718 $wgMasterWaitTimeout = 10;
720 /** File to log database errors to */
721 $wgDBerrorLog = false;
723 /** When to give an error message */
724 $wgDBClusterTimeout = 10;
727 * Scale load balancer polling time so that under overload conditions, the database server
728 * receives a SHOW STATUS query at an average interval of this many microseconds
730 $wgDBAvgStatusPoll = 2000;
732 /** Set to true if using InnoDB tables */
733 $wgDBtransactions = false;
734 /** Set to true for compatibility with extensions that might be checking.
735 * MySQL 3.23.x is no longer supported. */
739 * Set to true to engage MySQL 4.1/5.0 charset-related features;
740 * for now will just cause sending of 'SET NAMES=utf8' on connect.
742 * WARNING: THIS IS EXPERIMENTAL!
744 * May break if you're not using the table defs from mysql5/tables.sql.
745 * May break if you're upgrading an existing wiki if set differently.
746 * Broken symptoms likely to include incorrect behavior with page titles,
747 * usernames, comments etc containing non-ASCII characters.
748 * Might also cause failures on the object cache and other things.
750 * Even correct usage may cause failures with Unicode supplementary
751 * characters (those not in the Basic Multilingual Plane) unless MySQL
752 * has enhanced their Unicode support.
757 * Other wikis on this site, can be administered from a single developer
759 * Array numeric key => database name
761 $wgLocalDatabases = array();
764 * Object cache settings
765 * See Defines.php for types
767 $wgMainCacheType = CACHE_NONE
;
768 $wgMessageCacheType = CACHE_ANYTHING
;
769 $wgParserCacheType = CACHE_ANYTHING
;
772 $wgParserCacheExpireTime = 86400;
774 // Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
775 $wgDBAhandler = 'db3';
777 $wgSessionsInMemcached = false;
779 /** This is used for setting php's session.save_handler. In practice, you will
780 * almost never need to change this ever. Other options might be 'user' or
781 * 'session_mysql.' Setting to null skips setting this entirely (which might be
782 * useful if you're doing cross-application sessions, see bug 11381) */
783 $wgSessionHandler = 'files';
786 * Memcached-specific settings
787 * See docs/memcached.txt
789 $wgUseMemCached = false;
790 $wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
791 $wgMemCachedServers = array( '127.0.0.1:11000' );
792 $wgMemCachedPersistent = false;
793 $wgMemCachedTimeout = 100000; //Data timeout in microseconds
797 * Set this to true to make a local copy of the message cache, for use in
798 * addition to memcached. The files will be put in $wgCacheDirectory.
800 $wgUseLocalMessageCache = false;
803 * Defines format of local cache
804 * true - Serialized object
805 * false - PHP source file (Warning - security risk)
807 $wgLocalMessageCacheSerialized = true;
810 * Localisation cache configuration. Associative array with keys:
811 * class: The class to use. May be overridden by extensions.
813 * store: The location to store cache data. May be 'files', 'db' or
814 * 'detect'. If set to "files", data will be in CDB files. If set
815 * to "db", data will be stored to the database. If set to
816 * "detect", files will be used if $wgCacheDirectory is set,
817 * otherwise the database will be used.
819 * storeClass: The class name for the underlying storage. If set to a class
820 * name, it overrides the "store" setting.
822 * storeDirectory: If the store class puts its data in files, this is the
823 * directory it will use. If this is false, $wgCacheDirectory
826 * manualRecache: Set this to true to disable cache updates on web requests.
827 * Use maintenance/rebuildLocalisationCache.php instead.
829 $wgLocalisationCacheConf = array(
830 'class' => 'LocalisationCache',
832 'storeClass' => false,
833 'storeDirectory' => false,
834 'manualRecache' => false,
839 /** Site language code, should be one of ./languages/Language(.*).php */
840 $wgLanguageCode = 'en';
843 * Some languages need different word forms, usually for different cases.
844 * Used in Language::convertGrammar().
846 $wgGrammarForms = array();
847 #$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
849 /** Treat language links as magic connectors, not inline links */
850 $wgInterwikiMagic = true;
852 /** Hide interlanguage links from the sidebar */
853 $wgHideInterlanguageLinks = false;
855 /** List of language names or overrides for default names in Names.php */
856 $wgExtraLanguageNames = array();
859 * List of language codes that don't correspond to an actual language.
860 * These codes are leftoffs from renames, or other legacy things.
861 * Also, qqq is a dummy "language" for documenting messages.
863 $wgDummyLanguageCodes = array( 'qqq', 'als', 'be-x-old', 'dk', 'fiu-vro', 'iu', 'nb', 'simple', 'tp' );
865 /** We speak UTF-8 all the time now, unless some oddities happen */
866 $wgInputEncoding = 'UTF-8';
867 $wgOutputEncoding = 'UTF-8';
868 $wgEditEncoding = '';
871 * Set this to true to replace Arabic presentation forms with their standard
872 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
875 * Note that pages with titles containing presentation forms will become
876 * inaccessible, run maintenance/cleanupTitles.php to fix this.
878 $wgFixArabicUnicode = true;
881 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
882 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
883 * set to "ml". Note that some clients (even new clients as of 2010) do not
884 * support these characters.
886 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
887 * fix any ZWJ sequences in existing page titles.
889 $wgFixMalayalamUnicode = true;
892 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
893 * For Unix-like operating systems, set this to to a locale that has a UTF-8
894 * character set. Only the character set is relevant.
896 $wgShellLocale = 'en_US.utf8';
899 * Set this to eg 'ISO-8859-1' to perform character set
900 * conversion when loading old revisions not marked with
901 * "utf-8" flag. Use this when converting wiki to UTF-8
902 * without the burdensome mass conversion of old text data.
904 * NOTE! This DOES NOT touch any fields other than old_text.
905 * Titles, comments, user names, etc still must be converted
906 * en masse in the database before continuing as a UTF-8 wiki.
908 $wgLegacyEncoding = false;
911 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
912 * create stub reference rows in the text table instead of copying
913 * the full text of all current entries from 'cur' to 'text'.
915 * This will speed up the conversion step for large sites, but
916 * requires that the cur table be kept around for those revisions
917 * to remain viewable.
919 * maintenance/migrateCurStubs.php can be used to complete the
920 * migration in the background once the wiki is back online.
922 * This option affects the updaters *only*. Any present cur stub
923 * revisions will be readable at runtime regardless of this setting.
925 $wgLegacySchemaConversion = false;
927 $wgMimeType = 'text/html';
928 $wgJsMimeType = 'text/javascript';
929 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
930 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
931 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
934 * Should we output an HTML5 doctype? This mode is still experimental, but
935 * all indications are that it should be usable, so it's enabled by default.
936 * If all goes well, it will be removed and become always true before the 1.16
942 * Defines the value of the version attribute in the <html> tag, if any.
943 * Will be initialized later if not set explicitly.
945 $wgHtml5Version = null;
948 * Enabled RDFa attributes for use in wikitext.
949 * NOTE: Interaction with HTML5 is somewhat underspecified.
951 $wgAllowRdfaAttributes = false;
954 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
956 $wgAllowMicrodataAttributes = false;
959 * Should we try to make our HTML output well-formed XML? If set to false,
960 * output will be a few bytes shorter, and the HTML will arguably be more
961 * readable. If set to true, life will be much easier for the authors of
962 * screen-scraping bots, and the HTML will arguably be more readable.
964 * Setting this to false may omit quotation marks on some attributes, omit
965 * slashes from some self-closing tags, omit some ending tags, etc., where
966 * permitted by HTML5. Setting it to true will not guarantee that all pages
967 * will be well-formed, although non-well-formed pages should be rare and it's
968 * a bug if you find one. Conversely, setting it to false doesn't mean that
969 * all XML-y constructs will be omitted, just that they might be.
971 * Because of compatibility with screen-scraping bots, and because it's
972 * controversial, this is currently left to true by default.
974 $wgWellFormedXml = true;
977 * Permit other namespaces in addition to the w3.org default.
978 * Use the prefix for the key and the namespace for the value. For
980 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
981 * Normally we wouldn't have to define this in the root <html>
982 * element, but IE needs it there in some circumstances.
984 $wgXhtmlNamespaces = array();
986 /** Enable to allow rewriting dates in page text.
987 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
988 $wgUseDynamicDates = false;
989 /** Enable dates like 'May 12' instead of '12 May', this only takes effect if
990 * the interface is set to English
992 $wgAmericanDates = false;
994 * For Hindi and Arabic use local numerals instead of Western style (0-9)
995 * numerals in interface.
997 $wgTranslateNumerals = true;
1000 * Translation using MediaWiki: namespace.
1001 * Interface messages will be loaded from the database.
1003 $wgUseDatabaseMessages = true;
1006 * Expiry time for the message cache key
1008 $wgMsgCacheExpiry = 86400;
1011 * Maximum entry size in the message cache, in bytes
1013 $wgMaxMsgCacheEntrySize = 10000;
1016 * If true, serialized versions of the messages arrays will be
1017 * read from the 'serialized' subdirectory if they are present.
1018 * Set to false to always use the Messages files, regardless of
1019 * whether they are up to date or not.
1021 $wgEnableSerializedMessages = true;
1024 * Set to false if you are thorough system admin who always remembers to keep
1025 * serialized files up to date to save few mtime calls.
1027 $wgCheckSerialized = true;
1029 /** Whether to enable language variant conversion. */
1030 $wgDisableLangConversion = false;
1032 /** Whether to enable language variant conversion for links. */
1033 $wgDisableTitleConversion = false;
1035 /** Default variant code, if false, the default will be the language code */
1036 $wgDefaultLanguageVariant = false;
1038 /** Disabled variants array of language variant conversion.
1040 * $wgDisabledVariants[] = 'zh-mo';
1041 * $wgDisabledVariants[] = 'zh-my';
1044 * $wgDisabledVariants = array('zh-mo', 'zh-my');
1046 $wgDisabledVariants = array();
1049 * Like $wgArticlePath, but on multi-variant wikis, this provides a
1050 * path format that describes which parts of the URL contain the
1051 * language variant. For Example:
1053 * $wgLanguageCode = 'sr';
1054 * $wgVariantArticlePath = '/$2/$1';
1055 * $wgArticlePath = '/wiki/$1';
1057 * A link to /wiki/ would be redirected to /sr/Главна_страна
1059 * It is important that $wgArticlePath not overlap with possible values
1060 * of $wgVariantArticlePath.
1062 $wgVariantArticlePath = false;///< defaults to false
1065 * Show a bar of language selection links in the user login and user
1066 * registration forms; edit the "loginlanguagelinks" message to
1069 $wgLoginLanguageSelector = false;
1072 * Whether to use zhdaemon to perform Chinese text processing
1073 * zhdaemon is under developement, so normally you don't want to
1074 * use it unless for testing
1076 $wgUseZhdaemon = false;
1077 $wgZhdaemonHost="localhost";
1078 $wgZhdaemonPort=2004;
1081 # Miscellaneous configuration settings
1084 $wgLocalInterwiki = 'w';
1085 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
1087 /** Interwiki caching settings.
1088 $wgInterwikiCache specifies path to constant database file
1089 This cdb database is generated by dumpInterwiki from maintenance
1090 and has such key formats:
1091 dbname:key - a simple key (e.g. enwiki:meta)
1092 _sitename:key - site-scope key (e.g. wiktionary:meta)
1093 __global:key - global-scope key (e.g. __global:meta)
1094 __sites:dbname - site mapping (e.g. __sites:enwiki)
1095 Sites mapping just specifies site name, other keys provide
1096 "local url" data layout.
1097 $wgInterwikiScopes specify number of domains to check for messages:
1098 1 - Just wiki(db)-level
1099 2 - wiki and global levels
1101 $wgInterwikiFallbackSite - if unable to resolve from cache
1103 $wgInterwikiCache = false;
1104 $wgInterwikiScopes = 3;
1105 $wgInterwikiFallbackSite = 'wiki';
1108 * If local interwikis are set up which allow redirects,
1109 * set this regexp to restrict URLs which will be displayed
1110 * as 'redirected from' links.
1112 * It might look something like this:
1113 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
1115 * Leave at false to avoid displaying any incoming redirect markers.
1116 * This does not affect intra-wiki redirects, which don't change
1119 $wgRedirectSources = false;
1122 $wgShowIPinHeader = true; # For non-logged in users
1123 $wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
1124 $wgMaxArticleSize = 2048; # Maximum article size in kilobytes
1125 # Maximum number of bytes in username. You want to run the maintenance
1126 # script ./maintenance/checkUsernames.php once you have changed this value
1127 $wgMaxNameChars = 255;
1129 $wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
1132 * Maximum recursion depth for templates within templates.
1133 * The current parser adds two levels to the PHP call stack for each template,
1134 * and xdebug limits the call stack to 100 by default. So this should hopefully
1135 * stop the parser before it hits the xdebug limit.
1137 $wgMaxTemplateDepth = 40;
1138 $wgMaxPPExpandDepth = 40;
1141 * If true, removes (substitutes) templates in "~~~~" signatures.
1143 $wgCleanSignatures = true;
1145 $wgExtraSubtitle = '';
1146 $wgSiteSupportPage = ''; # A page where you users can receive donations
1149 * Set this to a string to put the wiki into read-only mode. The text will be
1150 * used as an explanation to users.
1152 * This prevents most write operations via the web interface. Cache updates may
1153 * still be possible. To prevent database writes completely, use the read_only
1159 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
1160 * Its contents will be shown to users as part of the read-only warning
1163 $wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
1166 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
1167 * The debug log file should be not be publicly accessible if it is used, as it
1168 * may contain private data.
1170 $wgDebugLogFile = '';
1173 * Prefix for debug log lines
1175 $wgDebugLogPrefix = '';
1178 * If true, instead of redirecting, show a page with a link to the redirect
1179 * destination. This allows for the inspection of PHP error messages, and easy
1180 * resubmission of form data. For developer use only.
1182 $wgDebugRedirects = false;
1185 * If true, log debugging data from action=raw.
1186 * This is normally false to avoid overlapping debug entries due to gen=css and
1189 $wgDebugRawPage = false;
1192 * Send debug data to an HTML comment in the output.
1194 * This may occasionally be useful when supporting a non-technical end-user. It's
1195 * more secure than exposing the debug log file to the web, since the output only
1196 * contains private data for the current user. But it's not ideal for development
1197 * use since data is lost on fatal errors and redirects.
1199 $wgDebugComments = false;
1202 * Write SQL queries to the debug log
1204 $wgDebugDumpSql = false;
1207 * Set to an array of log group keys to filenames.
1208 * If set, wfDebugLog() output for that group will go to that file instead
1209 * of the regular $wgDebugLogFile. Useful for enabling selective logging
1212 $wgDebugLogGroups = array();
1215 * Display debug data at the bottom of the main content area.
1217 * Useful for developers and technical users trying to working on a closed wiki.
1219 $wgShowDebug = false;
1222 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
1224 $wgDebugTimestamps = false;
1227 * Print HTTP headers for every request in the debug information.
1229 $wgDebugPrintHttpHeaders = true;
1232 * Show the contents of $wgHooks in Special:Version
1234 $wgSpecialVersionShowHooks = false;
1237 * Whether to show "we're sorry, but there has been a database error" pages.
1238 * Displaying errors aids in debugging, but may display information useful
1241 $wgShowSQLErrors = false;
1244 * If true, some error messages will be colorized when running scripts on the
1245 * command line; this can aid picking important things out when debugging.
1246 * Ignored when running on Windows or when output is redirected to a file.
1248 $wgColorErrors = true;
1251 * If set to true, uncaught exceptions will print a complete stack trace
1252 * to output. This should only be used for debugging, as it may reveal
1253 * private information in function parameters due to PHP's backtrace
1256 $wgShowExceptionDetails = false;
1259 * If true, show a backtrace for database errors
1261 $wgShowDBErrorBacktrace = false;
1264 * Expose backend server host names through the API and various HTML comments
1266 $wgShowHostnames = false;
1269 * If set to true MediaWiki will throw notices for some possible error
1270 * conditions and for deprecated functions.
1272 $wgDevelopmentWarnings = false;
1275 * Use experimental, DMOZ-like category browser
1277 $wgUseCategoryBrowser = false;
1280 * Keep parsed pages in a cache (objectcache table or memcached)
1281 * to speed up output of the same page viewed by another user with the
1284 * This can provide a significant speedup for medium to large pages,
1285 * so you probably want to keep it on. Extensions that conflict with the
1286 * parser cache should disable the cache on a per-page basis instead.
1288 $wgEnableParserCache = true;
1291 * Append a configured value to the parser cache and the sitenotice key so
1292 * that they can be kept separate for some class of activity.
1294 $wgRenderHashAppend = '';
1297 * If on, the sidebar navigation links are cached for users with the
1298 * current language set. This can save a touch of load on a busy site
1299 * by shaving off extra message lookups.
1301 * However it is also fragile: changing the site configuration, or
1302 * having a variable $wgArticlePath, can produce broken links that
1303 * don't update as expected.
1305 $wgEnableSidebarCache = false;
1308 * Expiry time for the sidebar cache, in seconds
1310 $wgSidebarCacheExpiry = 86400;
1313 * Under which condition should a page in the main namespace be counted
1314 * as a valid article? If $wgUseCommaCount is set to true, it will be
1315 * counted if it contains at least one comma. If it is set to false
1316 * (default), it will only be counted if it contains at least one [[wiki
1317 * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
1319 * Retroactively changing this variable will not affect
1320 * the existing count (cf. maintenance/recount.sql).
1322 $wgUseCommaCount = false;
1325 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
1326 * values are easier on the database. A value of 1 causes the counters to be
1327 * updated on every hit, any higher value n cause them to update *on average*
1328 * every n hits. Should be set to either 1 or something largish, eg 1000, for
1329 * maximum efficiency.
1331 $wgHitcounterUpdateFreq = 1;
1333 # Basic user rights and block settings
1334 $wgSysopUserBans = true; # Allow sysops to ban logged-in users
1335 $wgSysopRangeBans = true; # Allow sysops to ban IP ranges
1336 $wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
1337 $wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
1338 $wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
1339 $wgBlockCIDRLimit = array(
1340 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
1341 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
1345 * If true, blocked users will not be allowed to login. When using this with
1346 * a public wiki, the effect of logging out blocked users may actually be
1347 * avers: unless the user's address is also blocked (e.g. auto-block),
1348 * logging the user out will again allow reading and editing, just as for
1349 * anonymous visitors.
1351 $wgBlockDisablesLogin = false; #
1353 # Pages anonymous user may see as an array, e.g.:
1354 # array ( "Main Page", "Wikipedia:Help");
1355 # Special:Userlogin and Special:Resetpass are always whitelisted.
1356 # NOTE: This will only work if $wgGroupPermissions['*']['read']
1357 # is false -- see below. Otherwise, ALL pages are accessible,
1358 # regardless of this setting.
1359 # Also note that this will only protect _pages in the wiki_.
1360 # Uploaded files will remain readable. Make your upload
1361 # directory name unguessable, or use .htaccess to protect it.
1362 $wgWhitelistRead = false;
1365 * Should editors be required to have a validated e-mail
1366 * address before being allowed to edit?
1368 $wgEmailConfirmToEdit=false;
1371 * Permission keys given to users in each group.
1372 * All users are implicitly in the '*' group including anonymous visitors;
1373 * logged-in users are all implicitly in the 'user' group. These will be
1374 * combined with the permissions of all groups that a given user is listed
1375 * in in the user_groups table.
1377 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
1378 * doing! This will wipe all permissions, and may mean that your users are
1379 * unable to perform certain essential tasks or access new functionality
1380 * when new permissions are introduced and default grants established.
1382 * Functionality to make pages inaccessible has not been extensively tested
1383 * for security. Use at your own risk!
1385 * This replaces wgWhitelistAccount and wgWhitelistEdit
1387 $wgGroupPermissions = array();
1389 // Implicit group for all visitors
1390 $wgGroupPermissions['*']['createaccount'] = true;
1391 $wgGroupPermissions['*']['read'] = true;
1392 $wgGroupPermissions['*']['edit'] = true;
1393 $wgGroupPermissions['*']['createpage'] = true;
1394 $wgGroupPermissions['*']['createtalk'] = true;
1395 $wgGroupPermissions['*']['writeapi'] = true;
1396 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
1398 // Implicit group for all logged-in accounts
1399 $wgGroupPermissions['user']['move'] = true;
1400 $wgGroupPermissions['user']['move-subpages'] = true;
1401 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
1402 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
1403 $wgGroupPermissions['user']['read'] = true;
1404 $wgGroupPermissions['user']['edit'] = true;
1405 $wgGroupPermissions['user']['createpage'] = true;
1406 $wgGroupPermissions['user']['createtalk'] = true;
1407 $wgGroupPermissions['user']['writeapi'] = true;
1408 $wgGroupPermissions['user']['upload'] = true;
1409 $wgGroupPermissions['user']['reupload'] = true;
1410 $wgGroupPermissions['user']['reupload-shared'] = true;
1411 $wgGroupPermissions['user']['minoredit'] = true;
1412 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
1413 $wgGroupPermissions['user']['sendemail'] = true;
1415 // Implicit group for accounts that pass $wgAutoConfirmAge
1416 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
1418 // Users with bot privilege can have their edits hidden
1419 // from various log pages by default
1420 $wgGroupPermissions['bot']['bot'] = true;
1421 $wgGroupPermissions['bot']['autoconfirmed'] = true;
1422 $wgGroupPermissions['bot']['nominornewtalk'] = true;
1423 $wgGroupPermissions['bot']['autopatrol'] = true;
1424 $wgGroupPermissions['bot']['suppressredirect'] = true;
1425 $wgGroupPermissions['bot']['apihighlimits'] = true;
1426 $wgGroupPermissions['bot']['writeapi'] = true;
1427 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
1429 // Most extra permission abilities go to this group
1430 $wgGroupPermissions['sysop']['block'] = true;
1431 $wgGroupPermissions['sysop']['createaccount'] = true;
1432 $wgGroupPermissions['sysop']['delete'] = true;
1433 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
1434 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
1435 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
1436 $wgGroupPermissions['sysop']['undelete'] = true;
1437 $wgGroupPermissions['sysop']['editinterface'] = true;
1438 $wgGroupPermissions['sysop']['editusercss'] = true;
1439 $wgGroupPermissions['sysop']['edituserjs'] = true;
1440 $wgGroupPermissions['sysop']['import'] = true;
1441 $wgGroupPermissions['sysop']['importupload'] = true;
1442 $wgGroupPermissions['sysop']['move'] = true;
1443 $wgGroupPermissions['sysop']['move-subpages'] = true;
1444 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
1445 $wgGroupPermissions['sysop']['patrol'] = true;
1446 $wgGroupPermissions['sysop']['autopatrol'] = true;
1447 $wgGroupPermissions['sysop']['protect'] = true;
1448 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
1449 $wgGroupPermissions['sysop']['rollback'] = true;
1450 $wgGroupPermissions['sysop']['trackback'] = true;
1451 $wgGroupPermissions['sysop']['upload'] = true;
1452 $wgGroupPermissions['sysop']['reupload'] = true;
1453 $wgGroupPermissions['sysop']['reupload-shared'] = true;
1454 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
1455 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
1456 $wgGroupPermissions['sysop']['upload_by_url'] = true;
1457 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
1458 $wgGroupPermissions['sysop']['blockemail'] = true;
1459 $wgGroupPermissions['sysop']['markbotedits'] = true;
1460 $wgGroupPermissions['sysop']['apihighlimits'] = true;
1461 $wgGroupPermissions['sysop']['browsearchive'] = true;
1462 $wgGroupPermissions['sysop']['noratelimit'] = true;
1463 $wgGroupPermissions['sysop']['versiondetail'] = true;
1464 $wgGroupPermissions['sysop']['movefile'] = true;
1465 #$wgGroupPermissions['sysop']['mergehistory'] = true;
1467 // Permission to change users' group assignments
1468 $wgGroupPermissions['bureaucrat']['userrights'] = true;
1469 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
1470 // Permission to change users' groups assignments across wikis
1471 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
1472 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
1473 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
1475 #$wgGroupPermissions['sysop']['deleterevision'] = true;
1476 // To hide usernames from users and Sysops
1477 #$wgGroupPermissions['suppress']['hideuser'] = true;
1478 // To hide revisions/log items from users and Sysops
1479 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
1480 // For private suppression log access
1481 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
1484 * The developer group is deprecated, but can be activated if need be
1485 * to use the 'lockdb' and 'unlockdb' special pages. Those require
1486 * that a lock file be defined and creatable/removable by the web
1489 # $wgGroupPermissions['developer']['siteadmin'] = true;
1492 * Permission keys revoked from users in each group.
1493 * This acts the same way as wgGroupPermissions above, except that
1494 * if the user is in a group here, the permission will be removed from them.
1496 * Improperly setting this could mean that your users will be unable to perform
1497 * certain essential tasks, so use at your own risk!
1499 $wgRevokePermissions = array();
1502 * Implicit groups, aren't shown on Special:Listusers or somewhere else
1504 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
1507 * A map of group names that the user is in, to group names that those users
1508 * are allowed to add or revoke.
1510 * Setting the list of groups to add or revoke to true is equivalent to "any group".
1512 * For example, to allow sysops to add themselves to the "bot" group:
1514 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
1516 * Implicit groups may be used for the source group, for instance:
1518 * $wgGroupsRemoveFromSelf = array( '*' => true );
1520 * This allows users in the '*' group (i.e. any user) to remove themselves from
1521 * any group that they happen to be in.
1524 $wgGroupsAddToSelf = array();
1525 $wgGroupsRemoveFromSelf = array();
1528 * Set of available actions that can be restricted via action=protect
1529 * You probably shouldn't change this.
1530 * Translated through restriction-* messages.
1532 $wgRestrictionTypes = array( 'edit', 'move' );
1535 * Rights which can be required for each protection level (via action=protect)
1537 * You can add a new protection level that requires a specific
1538 * permission by manipulating this array. The ordering of elements
1539 * dictates the order on the protection form's lists.
1541 * '' will be ignored (i.e. unprotected)
1542 * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
1544 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
1547 * Set the minimum permissions required to edit pages in each
1548 * namespace. If you list more than one permission, a user must
1549 * have all of them to edit pages in that namespace.
1551 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
1553 $wgNamespaceProtection = array();
1556 * Pages in namespaces in this array can not be used as templates.
1557 * Elements must be numeric namespace ids.
1558 * Among other things, this may be useful to enforce read-restrictions
1559 * which may otherwise be bypassed by using the template machanism.
1561 $wgNonincludableNamespaces = array();
1564 * Number of seconds an account is required to age before
1565 * it's given the implicit 'autoconfirm' group membership.
1566 * This can be used to limit privileges of new accounts.
1568 * Accounts created by earlier versions of the software
1569 * may not have a recorded creation date, and will always
1570 * be considered to pass the age test.
1572 * When left at 0, all registered accounts will pass.
1574 $wgAutoConfirmAge = 0;
1575 //$wgAutoConfirmAge = 600; // ten minutes
1576 //$wgAutoConfirmAge = 3600*24; // one day
1578 # Number of edits an account requires before it is autoconfirmed
1579 # Passing both this AND the time requirement is needed
1580 $wgAutoConfirmCount = 0;
1581 //$wgAutoConfirmCount = 50;
1584 * Automatically add a usergroup to any user who matches certain conditions.
1586 * array( '&' or '|' or '^', cond1, cond2, ... )
1587 * where cond1, cond2, ... are themselves conditions; *OR*
1588 * APCOND_EMAILCONFIRMED, *OR*
1589 * array( APCOND_EMAILCONFIRMED ), *OR*
1590 * array( APCOND_EDITCOUNT, number of edits ), *OR*
1591 * array( APCOND_AGE, seconds since registration ), *OR*
1592 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
1593 * array( APCOND_ISIP, ip ), *OR*
1594 * array( APCOND_IPINRANGE, range ), *OR*
1595 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
1596 * array( APCOND_BLOCKED ), *OR*
1597 * similar constructs defined by extensions.
1599 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
1600 * user who has provided an e-mail address.
1602 $wgAutopromote = array(
1603 'autoconfirmed' => array( '&',
1604 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
1605 array( APCOND_AGE
, &$wgAutoConfirmAge ),
1610 * These settings can be used to give finer control over who can assign which
1611 * groups at Special:Userrights. Example configuration:
1613 * // Bureaucrat can add any group
1614 * $wgAddGroups['bureaucrat'] = true;
1615 * // Bureaucrats can only remove bots and sysops
1616 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
1617 * // Sysops can make bots
1618 * $wgAddGroups['sysop'] = array( 'bot' );
1619 * // Sysops can disable other sysops in an emergency, and disable bots
1620 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
1622 $wgAddGroups = array();
1623 $wgRemoveGroups = array();
1626 * A list of available rights, in addition to the ones defined by the core.
1627 * For extensions only.
1629 $wgAvailableRights = array();
1632 * Optional to restrict deletion of pages with higher revision counts
1633 * to users with the 'bigdelete' permission. (Default given to sysops.)
1635 $wgDeleteRevisionsLimit = 0;
1637 # Proxy scanner settings
1641 * If you enable this, every editor's IP address will be scanned for open HTTP
1644 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
1645 * ISP and ask for your server to be shut down.
1647 * You have been warned.
1649 $wgBlockOpenProxies = false;
1650 /** Port we want to scan for a proxy */
1651 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
1652 /** Script used to scan */
1653 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
1655 $wgProxyMemcExpiry = 86400;
1656 /** This should always be customised in LocalSettings.php */
1657 $wgSecretKey = false;
1658 /** big list of banned IP addresses, in the keys not the values */
1659 $wgProxyList = array();
1661 $wgProxyKey = false;
1663 /** Number of accounts each IP address may create, 0 to disable.
1664 * Requires memcached */
1665 $wgAccountCreationThrottle = 0;
1667 # Client-side caching:
1669 /** Allow client-side caching of pages */
1670 $wgCachePages = true;
1673 * Set this to current time to invalidate all prior cached pages. Affects both
1674 * client- and server-side caching.
1675 * You can get the current date on your server by using the command:
1676 * date +%Y%m%d%H%M%S
1678 $wgCacheEpoch = '20030516000000';
1681 * Bump this number when changing the global style sheets and JavaScript.
1682 * It should be appended in the query string of static CSS and JS includes,
1683 * to ensure that client-side caches do not keep obsolete copies of global
1686 $wgStyleVersion = '268';
1689 # Server-side caching:
1692 * This will cache static pages for non-logged-in users to reduce
1693 * database traffic on public sites.
1694 * Must set $wgShowIPinHeader = false
1696 $wgUseFileCache = false;
1698 /** Directory where the cached page will be saved */
1699 $wgFileCacheDirectory = false; ///< defaults to "$wgCacheDirectory/html";
1702 * When using the file cache, we can store the cached HTML gzipped to save disk
1703 * space. Pages will then also be served compressed to clients that support it.
1704 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1705 * the default LocalSettings.php! If you enable this, remove that setting first.
1707 * Requires zlib support enabled in PHP.
1711 /** Whether MediaWiki should send an ETag header */
1714 # Email notification settings
1717 /** For email notification on page changes */
1718 $wgPasswordSender = $wgEmergencyContact;
1720 # true: from page editor if s/he opted-in
1721 # false: Enotif mails appear to come from $wgEmergencyContact
1722 $wgEnotifFromEditor = false;
1724 // TODO move UPO to preferences probably ?
1725 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1726 # If set to false, the corresponding input form on the user preference page is suppressed
1727 # It call this to be a "user-preferences-option (UPO)"
1728 $wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
1729 $wgEnotifWatchlist = false; # UPO
1730 $wgEnotifUserTalk = false; # UPO
1731 $wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
1732 $wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
1733 # # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
1735 # Send a generic mail instead of a personalised mail for each user. This
1736 # always uses UTC as the time zone, and doesn't include the username.
1738 # For pages with many users watching, this can significantly reduce mail load.
1739 # Has no effect when using sendmail rather than SMTP;
1741 $wgEnotifImpersonal = false;
1743 # Maximum number of users to mail at once when using impersonal mail. Should
1744 # match the limit on your mail server.
1745 $wgEnotifMaxRecips = 500;
1747 # Send mails via the job queue.
1748 $wgEnotifUseJobQ = false;
1750 # Use real name instead of username in e-mail "from" field
1751 $wgEnotifUseRealName = false;
1754 * Array of usernames who will be sent a notification email for every change which occurs on a wiki
1756 $wgUsersNotifiedOnAllChanges = array();
1758 /** Show watching users in recent changes, watchlist and page history views */
1759 $wgRCShowWatchingUsers = false; # UPO
1760 /** Show watching users in Page views */
1761 $wgPageShowWatchingUsers = false;
1762 /** Show the amount of changed characters in recent changes */
1763 $wgRCShowChangedSize = true;
1766 * If the difference between the character counts of the text
1767 * before and after the edit is below that value, the value will be
1768 * highlighted on the RC page.
1770 $wgRCChangedSizeThreshold = 500;
1773 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
1774 * view for watched pages with new changes */
1775 $wgShowUpdatedMarker = true;
1778 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
1780 $wgCookieExpiration = 30*86400;
1782 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1783 * problems when the user requests two pages within a short period of time. This
1784 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1787 $wgClockSkewFudge = 5;
1789 # Squid-related settings
1792 /** Enable/disable Squid */
1793 $wgUseSquid = false;
1795 /** If you run Squid3 with ESI support, enable this (default:false): */
1798 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1801 /** Internal server name as known to Squid, if different */
1802 # $wgInternalServer = 'http://yourinternal.tld:8000';
1803 $wgInternalServer = $wgServer;
1806 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1807 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1808 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1811 $wgSquidMaxage = 18000;
1814 * Default maximum age for raw CSS/JS accesses
1816 $wgForcedRawSMaxage = 300;
1819 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1821 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1822 * headers sent/modified from these proxies when obtaining the remote IP address
1824 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1826 $wgSquidServers = array();
1829 * As above, except these servers aren't purged on page changes; use to set a
1830 * list of trusted proxies, etc.
1832 $wgSquidServersNoPurge = array();
1834 /** Maximum number of titles to purge in any one client operation */
1835 $wgMaxSquidPurgeTitles = 400;
1837 /** HTCP multicast purging */
1839 $wgHTCPMulticastTTL = 1;
1840 # $wgHTCPMulticastAddress = "224.0.0.85";
1841 $wgHTCPMulticastAddress = false;
1843 /** Should forwarded Private IPs be accepted? */
1844 $wgUsePrivateIPs = false;
1849 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
1850 * or ".any.subdomain.net"
1852 $wgCookieDomain = '';
1853 $wgCookiePath = '/';
1854 $wgCookieSecure = ($wgProto == 'https');
1855 $wgDisableCookieCheck = false;
1858 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
1859 * using the database name.
1861 $wgCookiePrefix = false;
1864 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
1865 * in browsers that support this feature. This can mitigates some classes of
1868 * Only supported on PHP 5.2 or higher.
1870 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
1873 * If the requesting browser matches a regex in this blacklist, we won't
1874 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
1876 $wgHttpOnlyBlacklist = array(
1877 // Internet Explorer for Mac; sometimes the cookies work, sometimes
1878 // they don't. It's difficult to predict, as combinations of path
1879 // and expiration options affect its parsing.
1880 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1883 /** A list of cookies that vary the cache (for use by extensions) */
1884 $wgCacheVaryCookies = array();
1886 /** Override to customise the session name */
1887 $wgSessionName = false;
1889 /** Whether to allow inline image pointing to other websites */
1890 $wgAllowExternalImages = false;
1892 /** If the above is false, you can specify an exception here. Image URLs
1893 * that start with this string are then rendered, while all others are not.
1894 * You can use this to set up a trusted, simple repository of images.
1895 * You may also specify an array of strings to allow multiple sites
1898 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
1899 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
1901 $wgAllowExternalImagesFrom = '';
1903 /** If $wgAllowExternalImages is false, you can allow an on-wiki
1904 * whitelist of regular expression fragments to match the image URL
1905 * against. If the image matches one of the regular expression fragments,
1906 * The image will be displayed.
1908 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
1909 * Or false to disable it
1911 $wgEnableImageWhitelist = true;
1913 /** Allows to move images and other media files */
1914 $wgAllowImageMoving = true;
1916 /** Disable database-intensive features */
1917 $wgMiserMode = false;
1918 /** Disable all query pages if miser mode is on, not just some */
1919 $wgDisableQueryPages = false;
1920 /** Number of rows to cache in 'querycache' table when miser mode is on */
1921 $wgQueryCacheLimit = 1000;
1922 /** Number of links to a page required before it is deemed "wanted" */
1923 $wgWantedPagesThreshold = 1;
1924 /** Enable slow parser functions */
1925 $wgAllowSlowParserFunctions = false;
1928 * Maps jobs to their handling classes; extensions
1929 * can add to this to provide custom jobs
1931 $wgJobClasses = array(
1932 'refreshLinks' => 'RefreshLinksJob',
1933 'refreshLinks2' => 'RefreshLinksJob2',
1934 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
1935 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
1936 'sendMail' => 'EmaillingJob',
1937 'enotifNotify' => 'EnotifNotifyJob',
1938 'fixDoubleRedirect' => 'DoubleRedirectJob',
1942 * Additional functions to be performed with updateSpecialPages.
1943 * Expensive Querypages are already updated.
1945 $wgSpecialPageCacheUpdates = array(
1946 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
1950 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
1951 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
1952 * (ImageMagick) installed and available in the PATH.
1953 * Please see math/README for more information.
1956 /** Location of the texvc binary */
1957 $wgTexvc = './math/texvc';
1959 * Texvc background color
1960 * use LaTeX color format as used in \special function
1961 * for transparent background use value 'Transparent' for alpha transparency or
1962 * 'transparent' for binary transparency.
1964 $wgTexvcBackgroundColor = 'transparent';
1967 * Normally when generating math images, we double-check that the
1968 * directories we want to write to exist, and that files that have
1969 * been generated still exist when we need to bring them up again.
1971 * This lets us give useful error messages in case of permission
1972 * problems, and automatically rebuild images that have been lost.
1974 * On a big site with heavy NFS traffic this can be slow and flaky,
1975 * so sometimes we want to short-circuit it by setting this to false.
1977 $wgMathCheckFiles = true;
1980 # Profiling / debugging
1982 # You have to create a 'profiling' table in your database before using
1983 # profiling see maintenance/archives/patch-profiling.sql .
1985 # To enable profiling, edit StartProfiler.php
1987 /** Only record profiling info for pages that took longer than this */
1988 $wgProfileLimit = 0.0;
1989 /** Don't put non-profiling info into log file */
1990 $wgProfileOnly = false;
1991 /** Log sums from profiling into "profiling" table in db. */
1992 $wgProfileToDatabase = false;
1993 /** If true, print a raw call tree instead of per-function report */
1994 $wgProfileCallTree = false;
1995 /** Should application server host be put into profiling table */
1996 $wgProfilePerHost = false;
1998 /** Settings for UDP profiler */
1999 $wgUDPProfilerHost = '127.0.0.1';
2000 $wgUDPProfilerPort = '3811';
2002 /** Detects non-matching wfProfileIn/wfProfileOut calls */
2003 $wgDebugProfiling = false;
2004 /** Output debug message on every wfProfileIn/wfProfileOut */
2005 $wgDebugFunctionEntry = 0;
2008 * Destination for wfIncrStats() data...
2009 * 'cache' to go into the system cache, if enabled (memcached)
2010 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
2013 $wgStatsMethod = 'cache';
2015 /** Whereas to count the number of time an article is viewed.
2016 * Does not work if pages are cached (for example with squid).
2018 $wgDisableCounters = false;
2020 $wgDisableTextSearch = false;
2021 $wgDisableSearchContext = false;
2025 * Set to true to have nicer highligted text in search results,
2026 * by default off due to execution overhead
2028 $wgAdvancedSearchHighlighting = false;
2031 * Regexp to match word boundaries, defaults for non-CJK languages
2032 * should be empty for CJK since the words are not separate
2034 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
2035 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
2038 * Set to true to have the search engine count total
2039 * search matches to present in the Special:Search UI.
2040 * Not supported by every search engine shipped with MW.
2042 * This could however be slow on larger wikis, and is pretty flaky
2043 * with the current title vs content split. Recommend avoiding until
2044 * that's been worked out cleanly; but this may aid in testing the
2045 * search UI and API to confirm that the result count works.
2047 $wgCountTotalSearchHits = false;
2050 * Template for OpenSearch suggestions, defaults to API action=opensearch
2052 * Sites with heavy load would tipically have these point to a custom
2053 * PHP wrapper to avoid firing up mediawiki for every keystroke
2055 * Placeholders: {searchTerms}
2058 $wgOpenSearchTemplate = false;
2061 * Enable suggestions while typing in search boxes
2062 * (results are passed around in OpenSearch format)
2063 * Requires $wgEnableOpenSearchSuggest = true;
2065 $wgEnableMWSuggest = false;
2068 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
2069 * false if you've disabled MWSuggest or another suggestion script and
2070 * want reduce load caused by cached scripts pulling suggestions.
2072 $wgEnableOpenSearchSuggest = true;
2075 * Expiry time for search suggestion responses
2077 $wgSearchSuggestCacheExpiry = 1200;
2080 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
2082 * Placeholders: {searchTerms}, {namespaces}, {dbname}
2085 $wgMWSuggestTemplate = false;
2088 * If you've disabled search semi-permanently, this also disables updates to the
2089 * table. If you ever re-enable, be sure to rebuild the search table.
2091 $wgDisableSearchUpdate = false;
2092 /** Uploads have to be specially set up to be secure */
2093 $wgEnableUploads = false;
2095 * Show EXIF data, on by default if available.
2096 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
2098 * NOTE FOR WINDOWS USERS:
2099 * To enable EXIF functions, add the folloing lines to the
2100 * "Windows extensions" section of php.ini:
2102 * extension=extensions/php_mbstring.dll
2103 * extension=extensions/php_exif.dll
2105 $wgShowEXIF = function_exists( 'exif_read_data' );
2108 * Set to true to enable the upload _link_ while local uploads are disabled.
2109 * Assumes that the special page link will be bounced to another server where
2112 $wgRemoteUploads = false;
2115 * Disable links to talk pages of anonymous users (IPs) in listings on special
2116 * pages like page history, Special:Recentchanges, etc.
2118 $wgDisableAnonTalk = false;
2120 * Do DELETE/INSERT for link updates instead of incremental
2122 $wgUseDumbLinkUpdate = false;
2125 * Anti-lock flags - bitfield
2127 * Preload links during link update for save
2128 * ALF_PRELOAD_EXISTENCE
2129 * Preload cur_id during replaceLinkHolders
2131 * Don't use locking reads when updating the link table. This is
2132 * necessary for wikis with a high edit rate for performance
2133 * reasons, but may cause link table inconsistency
2135 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
2138 $wgAntiLockFlags = 0;
2141 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
2142 * fall back to the old behaviour (no merging).
2144 $wgDiff3 = '/usr/bin/diff3';
2147 * Path to the GNU diff utility.
2149 $wgDiff = '/usr/bin/diff';
2152 * We can also compress text stored in the 'text' table. If this is set on, new
2153 * revisions will be compressed on page save if zlib support is available. Any
2154 * compressed revisions will be decompressed on load regardless of this setting
2155 * *but will not be readable at all* if zlib support is not available.
2157 $wgCompressRevisions = false;
2160 * This is the list of preferred extensions for uploading files. Uploading files
2161 * with extensions not in this list will trigger a warning.
2163 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
2165 /** Files with these extensions will never be allowed as uploads. */
2166 $wgFileBlacklist = array(
2167 # HTML may contain cookie-stealing JavaScript and web bugs
2168 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
2169 # PHP scripts may execute arbitrary code on the server
2170 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
2171 # Other types that may be interpreted by some servers
2172 'shtml', 'jhtml', 'pl', 'py', 'cgi',
2173 # May contain harmful executables for Windows victims
2174 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
2176 /** Files with these mime types will never be allowed as uploads
2177 * if $wgVerifyMimeType is enabled.
2179 $wgMimeTypeBlacklist= array(
2180 # HTML may contain cookie-stealing JavaScript and web bugs
2181 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
2182 # PHP scripts may execute arbitrary code on the server
2183 'application/x-php', 'text/x-php',
2184 # Other types that may be interpreted by some servers
2185 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
2186 # Client-side hazards on Internet Explorer
2187 'text/scriptlet', 'application/x-msdownload',
2188 # Windows metafile, client-side vulnerability on some systems
2189 'application/x-msmetafile',
2190 # A ZIP file may be a valid Java archive containing an applet which exploits the
2191 # same-origin policy to steal cookies
2195 /** This is a flag to determine whether or not to check file extensions on upload. */
2196 $wgCheckFileExtensions = true;
2199 * If this is turned off, users may override the warning for files not covered
2200 * by $wgFileExtensions.
2202 $wgStrictFileExtensions = true;
2204 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
2205 $wgUploadSizeWarning = false;
2207 /** For compatibility with old installations set to false */
2208 $wgPasswordSalt = true;
2210 /** Which namespaces should support subpages?
2211 * See Language.php for a list of namespaces.
2213 $wgNamespacesWithSubpages = array(
2216 NS_USER_TALK
=> true,
2217 NS_PROJECT_TALK
=> true,
2218 NS_FILE_TALK
=> true,
2219 NS_MEDIAWIKI
=> true,
2220 NS_MEDIAWIKI_TALK
=> true,
2221 NS_TEMPLATE_TALK
=> true,
2222 NS_HELP_TALK
=> true,
2223 NS_CATEGORY_TALK
=> true
2227 * Which namespaces have special treatment where they should be preview-on-open
2228 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
2229 * can specify namespaces of pages they have special treatment for
2231 $wgPreviewOnOpenNamespaces = array(
2235 $wgNamespacesToBeSearchedDefault = array(
2240 * Namespaces to be searched when user clicks the "Help" tab
2243 * Same format as $wgNamespacesToBeSearchedDefault
2245 $wgNamespacesToBeSearchedHelp = array(
2251 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
2252 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
2255 $wgSearchEverythingOnlyLoggedIn = false;
2258 * Site notice shown at the top of each page
2260 * MediaWiki:Sitenotice page, which will override this. You can also
2261 * provide a separate message for logged-out users using the
2262 * MediaWiki:Anonnotice page.
2271 * Plugins for media file type handling.
2272 * Each entry in the array maps a MIME type to a class name
2274 $wgMediaHandlers = array(
2275 'image/jpeg' => 'BitmapHandler',
2276 'image/png' => 'BitmapHandler',
2277 'image/gif' => 'GIFHandler',
2278 'image/tiff' => 'TiffHandler',
2279 'image/x-ms-bmp' => 'BmpHandler',
2280 'image/x-bmp' => 'BmpHandler',
2281 'image/svg+xml' => 'SvgHandler', // official
2282 'image/svg' => 'SvgHandler', // compat
2283 'image/vnd.djvu' => 'DjVuHandler', // official
2284 'image/x.djvu' => 'DjVuHandler', // compat
2285 'image/x-djvu' => 'DjVuHandler', // compat
2290 * Resizing can be done using PHP's internal image libraries or using
2291 * ImageMagick or another third-party converter, e.g. GraphicMagick.
2292 * These support more file formats than PHP, which only supports PNG,
2293 * GIF, JPG, XBM and WBMP.
2295 * Use Image Magick instead of PHP builtin functions.
2297 $wgUseImageMagick = false;
2298 /** The convert command shipped with ImageMagick */
2299 $wgImageMagickConvertCommand = '/usr/bin/convert';
2301 /** Sharpening parameter to ImageMagick */
2302 $wgSharpenParameter = '0x0.4';
2304 /** Reduction in linear dimensions below which sharpening will be enabled */
2305 $wgSharpenReductionThreshold = 0.85;
2308 * Temporary directory used for ImageMagick. The directory must exist. Leave
2309 * this set to false to let ImageMagick decide for itself.
2311 $wgImageMagickTempDir = false;
2314 * Use another resizing converter, e.g. GraphicMagick
2315 * %s will be replaced with the source path, %d with the destination
2316 * %w and %h will be replaced with the width and height
2318 * An example is provided for GraphicMagick
2319 * Leave as false to skip this
2321 #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
2322 $wgCustomConvertCommand = false;
2324 # Scalable Vector Graphics (SVG) may be uploaded as images.
2325 # Since SVG support is not yet standard in browsers, it is
2326 # necessary to rasterize SVGs to PNG as a fallback format.
2328 # An external program is required to perform this conversion:
2329 $wgSVGConverters = array(
2330 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
2331 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
2332 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
2333 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
2334 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
2335 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
2337 /** Pick one of the above */
2338 $wgSVGConverter = 'ImageMagick';
2339 /** If not in the executable PATH, specify */
2340 $wgSVGConverterPath = '';
2341 /** Don't scale a SVG larger than this */
2342 $wgSVGMaxSize = 2048;
2344 * Don't thumbnail an image if it will use too much working memory
2345 * Default is 50 MB if decompressed to RGBA form, which corresponds to
2346 * 12.5 million pixels or 3500x3500
2348 $wgMaxImageArea = 1.25e7
;
2350 * Force thumbnailing of animated GIFs above this size to a single
2351 * frame instead of an animated thumbnail. ImageMagick seems to
2352 * get real unhappy and doesn't play well with resource limits. :P
2353 * Defaulting to 1 megapixel (1000x1000)
2355 $wgMaxAnimatedGifArea = 1.0e6
;
2357 * Browsers don't support TIFF inline generally...
2358 * For inline display, we need to convert to PNG or JPEG.
2359 * Note scaling should work with ImageMagick, but may not with GD scaling.
2360 * // PNG is lossless, but inefficient for photos
2361 * $wgTiffThumbnailType = array( 'png', 'image/png' );
2362 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
2363 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
2365 $wgTiffThumbnailType = false;
2368 * If rendered thumbnail files are older than this timestamp, they
2369 * will be rerendered on demand as if the file didn't already exist.
2370 * Update if there is some need to force thumbs and SVG rasterizations
2371 * to rerender, such as fixes to rendering bugs.
2373 $wgThumbnailEpoch = '20030516000000';
2376 * If set, inline scaled images will still produce <img> tags ready for
2377 * output instead of showing an error message.
2379 * This may be useful if errors are transitory, especially if the site
2380 * is configured to automatically render thumbnails on request.
2382 * On the other hand, it may obscure error conditions from debugging.
2383 * Enable the debug log or the 'thumbnail' log group to make sure errors
2384 * are logged to a file for review.
2386 $wgIgnoreImageErrors = false;
2389 * Allow thumbnail rendering on page view. If this is false, a valid
2390 * thumbnail URL is still output, but no file will be created at
2391 * the target location. This may save some time if you have a
2392 * thumb.php or 404 handler set up which is faster than the regular
2395 $wgGenerateThumbnailOnParse = true;
2398 * Show thumbnails for old images on the image description page
2400 $wgShowArchiveThumbnails = true;
2402 /** Obsolete, always true, kept for compatibility with extensions */
2403 $wgUseImageResize = true;
2406 /** Set $wgCommandLineMode if it's not set already, to avoid notices */
2407 if( !isset( $wgCommandLineMode ) ) {
2408 $wgCommandLineMode = false;
2411 /** For colorized maintenance script output, is your terminal background dark ? */
2412 $wgCommandLineDarkBg = false;
2415 * Array for extensions to register their maintenance scripts with the
2416 * system. The key is the name of the class and the value is the full
2419 $wgMaintenanceScripts = array();
2422 # Recent changes settings
2425 /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
2426 $wgPutIPinRC = true;
2429 * Recentchanges items are periodically purged; entries older than this many
2431 * Default: 13 weeks = about three months
2433 $wgRCMaxAge = 13 * 7 * 24 * 3600;
2436 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
2437 * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
2438 * for some reason, and some users may use the high numbers to display that data which is still there.
2440 $wgRCFilterByAge = false;
2443 * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
2445 $wgRCLinkLimits = array( 50, 100, 250, 500 );
2446 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
2449 * Send recent changes updates via UDP. The updates will be formatted for IRC.
2450 * Set this to the IP address of the receiver.
2452 $wgRC2UDPAddress = false;
2455 * Port number for RC updates
2457 $wgRC2UDPPort = false;
2460 * Prefix to prepend to each UDP packet.
2461 * This can be used to identify the wiki. A script is available called
2462 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
2463 * tab to identify the IRC channel to send the log line to.
2465 $wgRC2UDPPrefix = '';
2468 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
2469 * IRC feed. If this is set to a string, that string will be used as the prefix.
2471 $wgRC2UDPInterwikiPrefix = false;
2474 * Set to true to omit "bot" edits (by users with the bot permission) from the
2477 $wgRC2UDPOmitBots = false;
2480 * Enable user search in Special:Newpages
2481 * This is really a temporary hack around an index install bug on some Wikipedias.
2482 * Kill it once fixed.
2484 $wgEnableNewpagesUserFilter = true;
2487 # Copyright and credits settings
2490 /** RDF metadata toggles */
2491 $wgEnableDublinCoreRdf = false;
2492 $wgEnableCreativeCommonsRdf = false;
2494 /** Override for copyright metadata.
2495 * TODO: these options need documentation
2497 $wgRightsPage = null;
2498 $wgRightsUrl = null;
2499 $wgRightsText = null;
2500 $wgRightsIcon = null;
2502 /** Set this to some HTML to override the rights icon with an arbitrary logo */
2503 $wgCopyrightIcon = null;
2505 /** Set this to true if you want detailed copyright information forms on Upload. */
2506 $wgUseCopyrightUpload = false;
2508 /** Set this to false if you want to disable checking that detailed copyright
2509 * information values are not empty. */
2510 $wgCheckCopyrightUpload = true;
2513 * Set this to the number of authors that you want to be credited below an
2514 * article text. Set it to zero to hide the attribution block, and a negative
2515 * number (like -1) to show all authors. Note that this will require 2-3 extra
2516 * database hits, which can have a not insignificant impact on performance for
2521 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
2522 * Otherwise, link to a separate credits page. */
2523 $wgShowCreditsIfMax = true;
2528 * Set this to false to avoid forcing the first letter of links to capitals.
2529 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2530 * appearing with a capital at the beginning of a sentence will *not* go to the
2531 * same place as links in the middle of a sentence using a lowercase initial.
2533 $wgCapitalLinks = true;
2536 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2537 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2538 * true by default (and setting them has no effect), due to various things that
2539 * require them to be so. Also, since Talk namespaces need to directly mirror their
2540 * associated content namespaces, the values for those are ignored in favor of the
2541 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2543 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2545 $wgCapitalLinkOverrides = array();
2548 * List of interwiki prefixes for wikis we'll accept as sources for
2549 * Special:Import (for sysops). Since complete page history can be imported,
2550 * these should be 'trusted'.
2552 * If a user has the 'import' permission but not the 'importupload' permission,
2553 * they will only be able to run imports through this transwiki interface.
2555 $wgImportSources = array();
2558 * Optional default target namespace for interwiki imports.
2559 * Can use this to create an incoming "transwiki"-style queue.
2560 * Set to numeric key, not the name.
2562 * Users may override this in the Special:Import dialog.
2564 $wgImportTargetNamespace = null;
2567 * If set to false, disables the full-history option on Special:Export.
2568 * This is currently poorly optimized for long edit histories, so is
2569 * disabled on Wikimedia's sites.
2571 $wgExportAllowHistory = true;
2574 * If set nonzero, Special:Export requests for history of pages with
2575 * more revisions than this will be rejected. On some big sites things
2576 * could get bogged down by very very long pages.
2578 $wgExportMaxHistory = 0;
2581 * Return distinct author list (when not returning full history)
2583 $wgExportAllowListContributors = false ;
2586 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
2587 * up to this specified level, which will cause it to include all
2588 * pages linked to from the pages you specify. Since this number
2589 * can become *insanely large* and could easily break your wiki,
2590 * it's disabled by default for now.
2592 * There's a HARD CODED limit of 5 levels of recursion to prevent a
2593 * crazy-big export from being done by someone setting the depth
2594 * number too high. In other words, last resort safety net.
2596 $wgExportMaxLinkDepth = 0;
2599 * Whether to allow the "export all pages in namespace" option
2601 $wgExportFromNamespaces = false;
2604 * Edits matching these regular expressions in body text
2605 * will be recognised as spam and rejected automatically.
2607 * There's no administrator override on-wiki, so be careful what you set. :)
2608 * May be an array of regexes or a single string for backwards compatibility.
2610 * See http://en.wikipedia.org/wiki/Regular_expression
2611 * Note that each regex needs a beginning/end delimiter, eg: # or /
2613 $wgSpamRegex = array();
2615 /** Same as the above except for edit summaries */
2616 $wgSummarySpamRegex = array();
2618 /** Similarly you can get a function to do the job. The function will be given
2619 * the following args:
2620 * - a Title object for the article the edit is made on
2621 * - the text submitted in the textarea (wpTextbox1)
2622 * - the section number.
2623 * The return should be boolean indicating whether the edit matched some evilness:
2625 * - false : let it through
2627 * For a complete example, have a look at the SpamBlacklist extension.
2629 $wgFilterCallback = false;
2631 /** Go button goes straight to the edit screen if the article doesn't exist. */
2632 $wgGoToEdit = false;
2634 /** Allow raw, unchecked HTML in <html>...</html> sections.
2635 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2636 * TO RESTRICT EDITING to only those that you trust
2641 * $wgUseTidy: use tidy to make sure HTML output is sane.
2642 * Tidy is a free tool that fixes broken HTML.
2643 * See http://www.w3.org/People/Raggett/tidy/
2644 * $wgTidyBin should be set to the path of the binary and
2645 * $wgTidyConf to the path of the configuration file.
2646 * $wgTidyOpts can include any number of parameters.
2648 * $wgTidyInternal controls the use of the PECL extension to use an in-
2649 * process tidy library instead of spawning a separate program.
2650 * Normally you shouldn't need to override the setting except for
2651 * debugging. To install, use 'pear install tidy' and add a line
2652 * 'extension=tidy.so' to php.ini.
2655 $wgAlwaysUseTidy = false;
2656 $wgTidyBin = 'tidy';
2657 $wgTidyConf = $IP.'/includes/tidy.conf';
2659 $wgTidyInternal = extension_loaded( 'tidy' );
2662 * Put tidy warnings in HTML comments
2663 * Only works for internal tidy.
2665 $wgDebugTidy = false;
2668 * Validate the overall output using tidy and refuse
2669 * to display the page if it's not valid.
2671 $wgValidateAllHtml = false;
2673 /** See list of skins and their symbolic names in languages/Language.php */
2674 $wgDefaultSkin = 'monobook';
2677 * Should we allow the user's to select their own skin that will override the default?
2678 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2680 $wgAllowUserSkin = true;
2683 * Optionally, we can specify a stylesheet to use for media="handheld".
2684 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2685 * If left empty, compliant handheld browsers won't pick up the skin
2686 * stylesheet, which is specified for 'screen' media.
2688 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2689 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2691 * Will also be switched in when 'handheld=yes' is added to the URL, like
2692 * the 'printable=yes' mode for print media.
2694 $wgHandheldStyle = false;
2697 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2698 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2699 * which doesn't recognize 'handheld' but does support media queries on its
2702 * Consider only using this if you have a *really good* handheld stylesheet,
2703 * as iPhone users won't have any way to disable it and use the "grown-up"
2706 $wgHandheldForIPhone = false;
2709 * Settings added to this array will override the default globals for the user
2710 * preferences used by anonymous visitors and newly created accounts.
2711 * For instance, to disable section editing links:
2712 * $wgDefaultUserOptions ['editsection'] = 0;
2715 $wgDefaultUserOptions = array(
2716 'ccmeonemails' => 0,
2718 'contextchars' => 50,
2719 'contextlines' => 5,
2720 'date' => 'default',
2723 'disablesuggest' => 0,
2724 'editfont' => 'default',
2725 'editondblclick' => 0,
2727 'editsectiononrightclick' => 0,
2729 'enotifminoredits' => 0,
2730 'enotifrevealaddr' => 0,
2731 'enotifusertalkpages' => 1,
2732 'enotifwatchlistpages' => 0,
2733 'extendwatchlist' => 0,
2734 'externaldiff' => 0,
2735 'externaleditor' => 0,
2737 'forceeditsummary' => 0,
2738 'gender' => 'unknown',
2740 'hidepatrolled' => 0,
2741 'highlightbroken' => 1,
2745 'minordefault' => 0,
2746 'newpageshidepatrolled' => 0,
2748 'noconvertlink' => 0,
2749 'norollbackdiff' => 0,
2750 'numberheadings' => 0,
2751 'previewonfirst' => 0,
2752 'previewontop' => 1,
2756 'rememberpassword' => 0,
2758 'searchlimit' => 20,
2759 'showhiddencats' => 0,
2760 'showjumplinks' => 1,
2761 'shownumberswatching' => 1,
2765 'stubthreshold' => 0,
2768 'uselivepreview' => 0,
2770 'watchcreations' => 0,
2771 'watchdefault' => 0,
2772 'watchdeletion' => 0,
2773 'watchlistdays' => 3.0,
2774 'watchlisthideanons' => 0,
2775 'watchlisthidebots' => 0,
2776 'watchlisthideliu' => 0,
2777 'watchlisthideminor' => 0,
2778 'watchlisthideown' => 0,
2779 'watchlisthidepatrolled' => 0,
2785 * Whether or not to allow and use real name fields.
2786 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2789 $wgAllowRealName = true;
2791 /** An array of preferences to not show for the user */
2792 $wgHiddenPrefs = array();
2794 /*****************************************************************************
2799 * A list of callback functions which are called once MediaWiki is fully initialised
2801 $wgExtensionFunctions = array();
2804 * Extension functions for initialisation of skins. This is called somewhat earlier
2805 * than $wgExtensionFunctions.
2807 $wgSkinExtensionFunctions = array();
2810 * Extension messages files.
2812 * Associative array mapping extension name to the filename where messages can be
2813 * found. The file should contain variable assignments. Any of the variables
2814 * present in languages/messages/MessagesEn.php may be defined, but $messages
2815 * is the most common.
2817 * Variables defined in extensions will override conflicting variables defined
2821 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
2824 $wgExtensionMessagesFiles = array();
2827 * Aliases for special pages provided by extensions.
2828 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
2830 $wgExtensionAliasesFiles = array();
2833 * Parser output hooks.
2834 * This is an associative array where the key is an extension-defined tag
2835 * (typically the extension name), and the value is a PHP callback.
2836 * These will be called as an OutputPageParserOutput hook, if the relevant
2837 * tag has been registered with the parser output object.
2839 * Registration is done with $pout->addOutputHook( $tag, $data ).
2841 * The callback has the form:
2842 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
2844 $wgParserOutputHooks = array();
2847 * List of valid skin names.
2848 * The key should be the name in all lower case, the value should be a display name.
2849 * The default skins will be added later, by Skin::getSkinNames(). Use
2850 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
2852 $wgValidSkinNames = array();
2855 * Special page list.
2856 * See the top of SpecialPage.php for documentation.
2858 $wgSpecialPages = array();
2861 * Array mapping class names to filenames, for autoloading.
2863 $wgAutoloadClasses = array();
2866 * An array of extension types and inside that their names, versions, authors,
2867 * urls, descriptions and pointers to localized description msgs. Note that
2868 * the version, url, description and descriptionmsg key can be omitted.
2871 * $wgExtensionCredits[$type][] = array(
2872 * 'name' => 'Example extension',
2874 * 'path' => __FILE__,
2875 * 'author' => 'Foo Barstein',
2876 * 'url' => 'http://wwww.example.com/Example%20Extension/',
2877 * 'description' => 'An example extension',
2878 * 'descriptionmsg' => 'exampleextension-desc',
2882 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
2883 * Where 'descriptionmsg' can be an array with message key and parameters:
2884 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
2886 $wgExtensionCredits = array();
2889 ******************************************************************************/
2892 * Allow user Javascript page?
2893 * This enables a lot of neat customizations, but may
2894 * increase security risk to users and server load.
2896 $wgAllowUserJs = false;
2899 * Allow user Cascading Style Sheets (CSS)?
2900 * This enables a lot of neat customizations, but may
2901 * increase security risk to users and server load.
2903 $wgAllowUserCss = false;
2906 * Allow user-preferences implemented in CSS?
2907 * This allows users to customise the site appearance to a greater
2908 * degree; disabling it will improve page load times.
2910 $wgAllowUserCssPrefs = true;
2912 /** Use the site's Javascript page? */
2913 $wgUseSiteJs = true;
2915 /** Use the site's Cascading Style Sheets (CSS)? */
2916 $wgUseSiteCss = true;
2919 * Filter for Special:Randompage. Part of a WHERE clause
2920 * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
2923 $wgExtraRandompageSQL = false;
2925 /** Allow the "info" action, very inefficient at the moment */
2926 $wgAllowPageInfo = false;
2928 /** Maximum indent level of toc. */
2929 $wgMaxTocLevel = 999;
2931 /** Name of the external diff engine to use */
2932 $wgExternalDiffEngine = false;
2934 /** Use RC Patrolling to check for vandalism */
2935 $wgUseRCPatrol = true;
2937 /** Use new page patrolling to check new pages on Special:Newpages */
2938 $wgUseNPPatrol = true;
2940 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
2943 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
2944 * eg Recentchanges, Newpages. */
2947 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
2948 * A cached version will continue to be served out even if changes
2949 * are made, until this many seconds runs out since the last render.
2951 * If set to 0, feed caching is disabled. Use this for debugging only;
2952 * feed generation can be pretty slow with diffs.
2954 $wgFeedCacheTimeout = 60;
2956 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
2957 * pages larger than this size. */
2958 $wgFeedDiffCutoff = 32768;
2960 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
2961 * every page. Some sites might have a different feed they'd like to promote
2962 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
2963 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
2964 * of either 'rss' or 'atom'.
2966 $wgOverrideSiteFeed = array();
2969 * Which feed types should we provide by default? This can include 'rss',
2970 * 'atom', neither, or both.
2972 $wgAdvertisedFeedTypes = array( 'atom' );
2975 * Additional namespaces. If the namespaces defined in Language.php and
2976 * Namespace.php are insufficient, you can create new ones here, for example,
2977 * to import Help files in other languages.
2978 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2979 * no longer be accessible. If you rename it, then you can access them through
2980 * the new namespace name.
2982 * Custom namespaces should start at 100 to avoid conflicting with standard
2983 * namespaces, and should always follow the even/odd main/talk pattern.
2985 #$wgExtraNamespaces =
2986 # array(100 => "Hilfe",
2987 # 101 => "Hilfe_Diskussion",
2989 # 103 => "Discussion_Aide"
2991 $wgExtraNamespaces = null;
2995 * These are alternate names for the primary localised namespace names, which
2996 * are defined by $wgExtraNamespaces and the language file. If a page is
2997 * requested with such a prefix, the request will be redirected to the primary
3000 * Set this to a map from namespace names to IDs.
3002 * $wgNamespaceAliases = array(
3003 * 'Wikipedian' => NS_USER,
3007 $wgNamespaceAliases = array();
3010 * Limit images on image description pages to a user-selectable limit. In order
3011 * to reduce disk usage, limits can only be selected from a list.
3012 * The user preference is saved as an array offset in the database, by default
3013 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
3014 * change it if you alter the array (see bug 8858).
3015 * This is the list of settings the user can choose from:
3017 $wgImageLimits = array (
3023 array(10000,10000) );
3026 * Adjust thumbnails on image pages according to a user setting. In order to
3027 * reduce disk usage, the values can only be selected from a list. This is the
3028 * list of settings the user can choose from:
3030 $wgThumbLimits = array(
3040 * Adjust width of upright images when parameter 'upright' is used
3041 * This allows a nicer look for upright images without the need to fix the width
3042 * by hardcoded px in wiki sourcecode.
3044 $wgThumbUpright = 0.75;
3047 * Default parameters for the <gallery> tag
3050 $wgGalleryOptions = array (
3051 'imagesPerRow' => 4, // Default number of images per-row in the gallery
3052 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
3053 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
3054 'captionLength' => 20, // Length of caption to truncate (in characters)
3055 'showBytes' => true, // Show the filesize in bytes in categories
3059 * On category pages, show thumbnail gallery for images belonging to that
3060 * category instead of listing them as articles.
3062 $wgCategoryMagicGallery = true;
3065 * Paging limit for categories
3067 $wgCategoryPagingLimit = 200;
3070 * Should the default category sortkey be the prefixed title?
3071 * Run maintenance/refreshLinks.php after changing this.
3073 $wgCategoryPrefixedDefaultSortkey = true;
3076 * Browser Blacklist for unicode non compliant browsers
3077 * Contains a list of regexps : "/regexp/" matching problematic browsers
3079 $wgBrowserBlackList = array(
3081 * Netscape 2-4 detection
3082 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
3083 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
3084 * with a negative assertion. The [UIN] identifier specifies the level of security
3085 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
3086 * The language string is unreliable, it is missing on NS4 Mac.
3088 * Reference: http://www.psychedelix.com/agents/index.shtml
3090 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3091 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3092 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3095 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
3098 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
3099 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
3100 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
3103 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
3104 * @link http://en.wikipedia.org/wiki/Template%3AOS9
3106 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
3109 * Google wireless transcoder, seems to eat a lot of chars alive
3110 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
3112 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
3116 * Fake out the timezone that the server thinks it's in. This will be used for
3117 * date display and not for what's stored in the DB. Leave to null to retain
3118 * your server's OS-based timezone value.
3120 * This variable is currently used only for signature formatting and for local
3121 * time/date parser variables ({{LOCALTIME}} etc.)
3123 * Timezones can be translated by editing MediaWiki messages of type
3124 * timezone-nameinlowercase like timezone-utc.
3126 # $wgLocaltimezone = 'GMT';
3127 # $wgLocaltimezone = 'PST8PDT';
3128 # $wgLocaltimezone = 'Europe/Sweden';
3129 # $wgLocaltimezone = 'CET';
3130 $wgLocaltimezone = null;
3133 * Set an offset from UTC in minutes to use for the default timezone setting
3134 * for anonymous users and new user accounts.
3136 * This setting is used for most date/time displays in the software, and is
3137 * overrideable in user preferences. It is *not* used for signature timestamps.
3139 * You can set it to match the configured server timezone like this:
3140 * $wgLocalTZoffset = date("Z") / 60;
3142 * If your server is not configured for the timezone you want, you can set
3143 * this in conjunction with the signature timezone and override the PHP default
3145 * $wgLocaltimezone="Europe/Berlin";
3146 * date_default_timezone_set( $wgLocaltimezone );
3147 * $wgLocalTZoffset = date("Z") / 60;
3149 * Leave at NULL to show times in universal time (UTC/GMT).
3151 $wgLocalTZoffset = null;
3155 * When translating messages with wfMsg(), it is not always clear what should
3156 * be considered UI messages and what should be content messages.
3158 * For example, for the English Wikipedia, there should be only one 'mainpage',
3159 * so when getting the link for 'mainpage', we should treat it as site content
3160 * and call wfMsgForContent(), but for rendering the text of the link, we call
3161 * wfMsg(). The code behaves this way by default. However, sites like the
3162 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
3163 * different languages. This array provides a way to override the default
3164 * behavior. For example, to allow language-specific main page and community
3167 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
3169 $wgForceUIMsgAsContentMsg = array();
3173 * Authentication plugin.
3178 * Global list of hooks.
3179 * Add a hook by doing:
3180 * $wgHooks['event_name'][] = $function;
3182 * $wgHooks['event_name'][] = array($function, $data);
3184 * $wgHooks['event_name'][] = array($object, 'method');
3189 * The logging system has two levels: an event type, which describes the
3190 * general category and can be viewed as a named subset of all logs; and
3191 * an action, which is a specific kind of event that can exist in that
3194 $wgLogTypes = array( '',
3208 * This restricts log access to those who have a certain right
3209 * Users without this will not see it in the option menu and can not view it
3210 * Restricted logs are not added to recent changes
3211 * Logs should remain non-transcludable
3212 * Format: logtype => permissiontype
3214 $wgLogRestrictions = array(
3215 'suppress' => 'suppressionlog'
3219 * Show/hide links on Special:Log will be shown for these log types.
3221 * This is associative array of log type => boolean "hide by default"
3223 * See $wgLogTypes for a list of available log types.
3226 * $wgFilterLogTypes => array(
3228 * 'import' => false,
3231 * Will display show/hide links for the move and import logs. Move logs will be
3232 * hidden by default unless the link is clicked. Import logs will be shown by
3233 * default, and hidden when the link is clicked.
3235 * A message of the form log-show-hide-<type> should be added, and will be used
3236 * for the link text.
3238 $wgFilterLogTypes = array(
3243 * Lists the message key string for each log type. The localized messages
3244 * will be listed in the user interface.
3246 * Extensions with custom log types may add to this array.
3248 $wgLogNames = array(
3249 '' => 'all-logs-page',
3250 'block' => 'blocklogpage',
3251 'protect' => 'protectlogpage',
3252 'rights' => 'rightslog',
3253 'delete' => 'dellogpage',
3254 'upload' => 'uploadlogpage',
3255 'move' => 'movelogpage',
3256 'import' => 'importlogpage',
3257 'patrol' => 'patrol-log-page',
3258 'merge' => 'mergelog',
3259 'suppress' => 'suppressionlog',
3263 * Lists the message key string for descriptive text to be shown at the
3264 * top of each log type.
3266 * Extensions with custom log types may add to this array.
3268 $wgLogHeaders = array(
3269 '' => 'alllogstext',
3270 'block' => 'blocklogtext',
3271 'protect' => 'protectlogtext',
3272 'rights' => 'rightslogtext',
3273 'delete' => 'dellogpagetext',
3274 'upload' => 'uploadlogpagetext',
3275 'move' => 'movelogpagetext',
3276 'import' => 'importlogpagetext',
3277 'patrol' => 'patrol-log-header',
3278 'merge' => 'mergelogpagetext',
3279 'suppress' => 'suppressionlogtext',
3283 * Lists the message key string for formatting individual events of each
3284 * type and action when listed in the logs.
3286 * Extensions with custom log types may add to this array.
3288 $wgLogActions = array(
3289 'block/block' => 'blocklogentry',
3290 'block/unblock' => 'unblocklogentry',
3291 'block/reblock' => 'reblock-logentry',
3292 'protect/protect' => 'protectedarticle',
3293 'protect/modify' => 'modifiedarticleprotection',
3294 'protect/unprotect' => 'unprotectedarticle',
3295 'protect/move_prot' => 'movedarticleprotection',
3296 'rights/rights' => 'rightslogentry',
3297 'delete/delete' => 'deletedarticle',
3298 'delete/restore' => 'undeletedarticle',
3299 'delete/revision' => 'revdelete-logentry',
3300 'delete/event' => 'logdelete-logentry',
3301 'upload/upload' => 'uploadedimage',
3302 'upload/overwrite' => 'overwroteimage',
3303 'upload/revert' => 'uploadedimage',
3304 'move/move' => '1movedto2',
3305 'move/move_redir' => '1movedto2_redir',
3306 'import/upload' => 'import-logentry-upload',
3307 'import/interwiki' => 'import-logentry-interwiki',
3308 'merge/merge' => 'pagemerge-logentry',
3309 'suppress/revision' => 'revdelete-logentry',
3310 'suppress/file' => 'revdelete-logentry',
3311 'suppress/event' => 'logdelete-logentry',
3312 'suppress/delete' => 'suppressedarticle',
3313 'suppress/block' => 'blocklogentry',
3314 'suppress/reblock' => 'reblock-logentry',
3315 'patrol/patrol' => 'patrol-log-line',
3319 * The same as above, but here values are names of functions,
3322 $wgLogActionsHandlers = array();
3325 * Maintain a log of newusers at Log/newusers?
3327 $wgNewUserLog = true;
3330 * List of special pages, followed by what subtitle they should go under
3331 * at Special:SpecialPages
3333 $wgSpecialPageGroups = array(
3334 'DoubleRedirects' => 'maintenance',
3335 'BrokenRedirects' => 'maintenance',
3336 'Lonelypages' => 'maintenance',
3337 'Uncategorizedpages' => 'maintenance',
3338 'Uncategorizedcategories' => 'maintenance',
3339 'Uncategorizedimages' => 'maintenance',
3340 'Uncategorizedtemplates' => 'maintenance',
3341 'Unusedcategories' => 'maintenance',
3342 'Unusedimages' => 'maintenance',
3343 'Protectedpages' => 'maintenance',
3344 'Protectedtitles' => 'maintenance',
3345 'Unusedtemplates' => 'maintenance',
3346 'Withoutinterwiki' => 'maintenance',
3347 'Longpages' => 'maintenance',
3348 'Shortpages' => 'maintenance',
3349 'Ancientpages' => 'maintenance',
3350 'Deadendpages' => 'maintenance',
3351 'Wantedpages' => 'maintenance',
3352 'Wantedcategories' => 'maintenance',
3353 'Wantedfiles' => 'maintenance',
3354 'Wantedtemplates' => 'maintenance',
3355 'Unwatchedpages' => 'maintenance',
3356 'Fewestrevisions' => 'maintenance',
3358 'Userlogin' => 'login',
3359 'Userlogout' => 'login',
3360 'CreateAccount' => 'login',
3362 'Recentchanges' => 'changes',
3363 'Recentchangeslinked' => 'changes',
3364 'Watchlist' => 'changes',
3365 'Newimages' => 'changes',
3366 'Newpages' => 'changes',
3368 'Tags' => 'changes',
3370 'Upload' => 'media',
3371 'Listfiles' => 'media',
3372 'MIMEsearch' => 'media',
3373 'FileDuplicateSearch' => 'media',
3374 'Filepath' => 'media',
3376 'Listusers' => 'users',
3377 'Activeusers' => 'users',
3378 'Listgrouprights' => 'users',
3379 'Ipblocklist' => 'users',
3380 'Contributions' => 'users',
3381 'Emailuser' => 'users',
3382 'Listadmins' => 'users',
3383 'Listbots' => 'users',
3384 'Userrights' => 'users',
3385 'Blockip' => 'users',
3386 'Preferences' => 'users',
3387 'Resetpass' => 'users',
3388 'DeletedContributions' => 'users',
3390 'Mostlinked' => 'highuse',
3391 'Mostlinkedcategories' => 'highuse',
3392 'Mostlinkedtemplates' => 'highuse',
3393 'Mostcategories' => 'highuse',
3394 'Mostimages' => 'highuse',
3395 'Mostrevisions' => 'highuse',
3397 'Allpages' => 'pages',
3398 'Prefixindex' => 'pages',
3399 'Listredirects' => 'pages',
3400 'Categories' => 'pages',
3401 'Disambiguations' => 'pages',
3403 'Randompage' => 'redirects',
3404 'Randomredirect' => 'redirects',
3405 'Mypage' => 'redirects',
3406 'Mytalk' => 'redirects',
3407 'Mycontributions' => 'redirects',
3408 'Search' => 'redirects',
3409 'LinkSearch' => 'redirects',
3411 'Movepage' => 'pagetools',
3412 'MergeHistory' => 'pagetools',
3413 'Revisiondelete' => 'pagetools',
3414 'Undelete' => 'pagetools',
3415 'Export' => 'pagetools',
3416 'Import' => 'pagetools',
3417 'Whatlinkshere' => 'pagetools',
3419 'Statistics' => 'wiki',
3420 'Version' => 'wiki',
3422 'Unlockdb' => 'wiki',
3423 'Allmessages' => 'wiki',
3424 'Popularpages' => 'wiki',
3426 'Specialpages' => 'other',
3427 'Blockme' => 'other',
3428 'Booksources' => 'other',
3432 * Disable the internal MySQL-based search, to allow it to be
3433 * implemented by an extension instead.
3435 $wgDisableInternalSearch = false;
3438 * Set this to a URL to forward search requests to some external location.
3439 * If the URL includes '$1', this will be replaced with the URL-encoded
3442 * For example, to forward to Google you'd have something like:
3443 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3444 * '&domains=http://example.com' .
3445 * '&sitesearch=http://example.com' .
3446 * '&ie=utf-8&oe=utf-8';
3448 $wgSearchForwardUrl = null;
3451 * Set a default target for external links, e.g. _blank to pop up a new window
3453 $wgExternalLinkTarget = false;
3456 * If true, external URL links in wiki text will be given the
3457 * rel="nofollow" attribute as a hint to search engines that
3458 * they should not be followed for ranking purposes as they
3459 * are user-supplied and thus subject to spamming.
3461 $wgNoFollowLinks = true;
3464 * Namespaces in which $wgNoFollowLinks doesn't apply.
3465 * See Language.php for a list of namespaces.
3467 $wgNoFollowNsExceptions = array();
3470 * If this is set to an array of domains, external links to these domain names
3471 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3472 * value of $wgNoFollowLinks. For instance:
3474 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3476 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3477 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3480 $wgNoFollowDomainExceptions = array();
3483 * Default robot policy. The default policy is to encourage indexing and fol-
3484 * lowing of links. It may be overridden on a per-namespace and/or per-page
3487 $wgDefaultRobotPolicy = 'index,follow';
3490 * Robot policies per namespaces. The default policy is given above, the array
3491 * is made of namespace constants as defined in includes/Defines.php. You can-
3492 * not specify a different default policy for NS_SPECIAL: it is always noindex,
3493 * nofollow. This is because a number of special pages (e.g., ListPages) have
3494 * many permutations of options that display the same data under redundant
3495 * URLs, so search engine spiders risk getting lost in a maze of twisty special
3496 * pages, all alike, and never reaching your actual content.
3499 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
3501 $wgNamespaceRobotPolicies = array();
3504 * Robot policies per article. These override the per-namespace robot policies.
3505 * Must be in the form of an array where the key part is a properly canonical-
3506 * ised text form title and the value is a robot policy.
3508 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
3509 * 'User:Bob' => 'index,follow' );
3510 * Example that DOES NOT WORK because the names are not canonical text forms:
3511 * $wgArticleRobotPolicies = array(
3512 * # Underscore, not space!
3513 * 'Main_Page' => 'noindex,follow',
3514 * # "Project", not the actual project name!
3515 * 'Project:X' => 'index,follow',
3516 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
3517 * 'abc' => 'noindex,nofollow'
3520 $wgArticleRobotPolicies = array();
3523 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
3524 * will not function, so users can't decide whether pages in that namespace are
3525 * indexed by search engines. If set to null, default to $wgContentNamespaces.
3527 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
3529 $wgExemptFromUserRobotsControl = null;
3532 * Specifies the minimal length of a user password. If set to 0, empty pass-
3533 * words are allowed.
3535 $wgMinimalPasswordLength = 1;
3538 * Activate external editor interface for files and pages
3539 * See http://www.mediawiki.org/wiki/Manual:External_editors
3541 $wgUseExternalEditor = true;
3543 /** Whether or not to sort special pages in Special:Specialpages */
3545 $wgSortSpecialPages = true;
3548 * Specify the name of a skin that should not be presented in the list of a-
3549 * vailable skins. Use for blacklisting a skin which you do not want to remove
3550 * from the .../skins/ directory
3553 $wgSkipSkins = array(); # More of the same
3556 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
3558 $wgDisabledActions = array();
3561 * Disable redirects to special pages and interwiki redirects, which use a 302
3562 * and have no "redirected from" link.
3564 $wgDisableHardRedirects = false;
3567 * Set to false to disable application of access keys and tooltips,
3568 * eg to avoid keyboard conflicts with system keys or as a low-level
3571 $wgEnableTooltipsAndAccesskeys = true;
3574 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3577 $wgEnableDnsBlacklist = false;
3580 * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
3583 $wgEnableSorbs = false;
3586 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
3589 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3592 * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
3595 $wgSorbsUrl = array();
3598 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3599 * what the other methods might say.
3601 $wgProxyWhitelist = array();
3604 * Simple rate limiter options to brake edit floods. Maximum number actions
3605 * allowed in the given number of seconds; after that the violating client re-
3606 * ceives HTTP 500 error pages until the period elapses.
3608 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3610 * This option set is experimental and likely to change. Requires memcached.
3612 $wgRateLimits = array(
3614 'anon' => null, // for any and all anonymous edits (aggregate)
3615 'user' => null, // for each logged-in user
3616 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3617 'ip' => null, // for each anon and recent account
3618 'subnet' => null, // ... with final octet removed
3626 'mailpassword' => array(
3629 'emailuser' => array(
3635 * Set to a filename to log rate limiter hits.
3637 $wgRateLimitLog = null;
3640 * Array of groups which should never trigger the rate limiter
3642 * @deprecated as of 1.13.0, the preferred method is using
3643 * $wgGroupPermissions[]['noratelimit']. However, this will still
3646 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3648 $wgRateLimitsExcludedGroups = array();
3651 * Array of IPs which should be excluded from rate limits.
3652 * This may be useful for whitelisting NAT gateways for conferences, etc.
3654 $wgRateLimitsExcludedIPs = array();
3657 * On Special:Unusedimages, consider images "used", if they are put
3658 * into a category. Default (false) is not to count those as used.
3660 $wgCountCategorizedImagesAsUsed = false;
3663 * External stores allow including content
3664 * from non database sources following URL links
3666 * Short names of ExternalStore classes may be specified in an array here:
3667 * $wgExternalStores = array("http","file","custom")...
3669 * CAUTION: Access to database might lead to code execution
3671 $wgExternalStores = false;
3674 * An array of external mysql servers, e.g.
3675 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
3676 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
3678 $wgExternalServers = array();
3681 * The place to put new revisions, false to put them in the local text table.
3682 * Part of a URL, e.g. DB://cluster1
3684 * Can be an array instead of a single string, to enable data distribution. Keys
3685 * must be consecutive integers, starting at zero. Example:
3687 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
3690 $wgDefaultExternalStore = false;
3693 * Revision text may be cached in $wgMemc to reduce load on external storage
3694 * servers and object extraction overhead for frequently-loaded revisions.
3696 * Set to 0 to disable, or number of seconds before cache expiry.
3698 $wgRevisionCacheExpiry = 0;
3701 * list of trusted media-types and mime types.
3702 * Use the MEDIATYPE_xxx constants to represent media types.
3703 * This list is used by Image::isSafeFile
3705 * Types not listed here will have a warning about unsafe content
3706 * displayed on the images description page. It would also be possible
3707 * to use this for further restrictions, like disabling direct
3708 * [[media:...]] links for non-trusted formats.
3710 $wgTrustedMediaFormats= array(
3711 MEDIATYPE_BITMAP
, //all bitmap formats
3712 MEDIATYPE_AUDIO
, //all audio formats
3713 MEDIATYPE_VIDEO
, //all plain video formats
3714 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
3715 "application/pdf", //PDF files
3716 #"application/x-shockwave-flash", //flash/shockwave movie
3720 * Allow special page inclusions such as {{Special:Allpages}}
3722 $wgAllowSpecialInclusion = true;
3725 * Timeout for HTTP requests done internally
3727 $wgHTTPTimeout = 25;
3730 * Timeout for Asynchronous (background) HTTP requests
3732 $wgAsyncHTTPTimeout = 25;
3735 * Proxy to use for CURL requests.
3737 $wgHTTPProxy = false;
3740 * Enable interwiki transcluding. Only when iw_trans=1.
3742 $wgEnableScaryTranscluding = false;
3744 * Expiry time for interwiki transclusion
3746 $wgTranscludeCacheExpiry = 3600;
3749 * Support blog-style "trackbacks" for articles. See
3750 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3752 $wgUseTrackbacks = false;
3755 * Enable filtering of categories in Recentchanges
3757 $wgAllowCategorizedRecentChanges = false ;
3760 * Number of jobs to perform per request. May be less than one in which case
3761 * jobs are performed probabalistically. If this is zero, jobs will not be done
3762 * during ordinary apache requests. In this case, maintenance/runJobs.php should
3763 * be run periodically.
3768 * Number of rows to update per job
3770 $wgUpdateRowsPerJob = 500;
3773 * Number of rows to update per query
3775 $wgUpdateRowsPerQuery = 100;
3778 * Enable AJAX framework
3783 * List of Ajax-callable functions.
3784 * Extensions acting as Ajax callbacks must register here
3786 $wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
3789 * Enable watching/unwatching pages using AJAX.
3790 * Requires $wgUseAjax to be true too.
3791 * Causes wfAjaxWatch to be added to $wgAjaxExportList
3793 $wgAjaxWatch = true;
3796 * Enable AJAX check for file overwrite, pre-upload
3798 $wgAjaxUploadDestCheck = true;
3801 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
3803 $wgAjaxLicensePreview = true;
3806 * Allow DISPLAYTITLE to change title display
3808 $wgAllowDisplayTitle = true;
3811 * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
3813 $wgRestrictDisplayTitle = true;
3816 * Array of usernames which may not be registered or logged in from
3817 * Maintenance scripts can still use these
3819 $wgReservedUsernames = array(
3820 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3821 'Conversion script', // Used for the old Wikipedia software upgrade
3822 'Maintenance script', // Maintenance scripts which perform editing, image import script
3823 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3824 'msg:double-redirect-fixer', // Automatic double redirect fix
3828 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
3829 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
3830 * crap files as images. When this directive is on, <title> will be allowed in files with
3831 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
3832 * and doesn't send appropriate MIME types for SVG images.
3834 $wgAllowTitlesInSVG = false;
3837 * Array of namespaces which can be deemed to contain valid "content", as far
3838 * as the site statistics are concerned. Useful if additional namespaces also
3839 * contain "content" which should be considered when generating a count of the
3840 * number of articles in the wiki.
3842 $wgContentNamespaces = array( NS_MAIN
);
3845 * Maximum amount of virtual memory available to shell processes under linux, in KB.
3847 $wgMaxShellMemory = 102400;
3850 * Maximum file size created by shell processes under linux, in KB
3851 * ImageMagick convert for example can be fairly hungry for scratch space
3853 $wgMaxShellFileSize = 102400;
3856 * Maximum CPU time in seconds for shell processes under linux
3858 $wgMaxShellTime = 180;
3861 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
3863 $wgPhpCli = '/usr/bin/php';
3867 * Path of the djvudump executable
3868 * Enable this and $wgDjvuRenderer to enable djvu rendering
3870 # $wgDjvuDump = 'djvudump';
3874 * Path of the ddjvu DJVU renderer
3875 * Enable this and $wgDjvuDump to enable djvu rendering
3877 # $wgDjvuRenderer = 'ddjvu';
3878 $wgDjvuRenderer = null;
3881 * Path of the djvutxt DJVU text extraction utility
3882 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
3884 # $wgDjvuTxt = 'djvutxt';
3888 * Path of the djvutoxml executable
3889 * This works like djvudump except much, much slower as of version 3.5.
3891 * For now I recommend you use djvudump instead. The djvuxml output is
3892 * probably more stable, so we'll switch back to it as soon as they fix
3893 * the efficiency problem.
3894 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
3896 # $wgDjvuToXML = 'djvutoxml';
3897 $wgDjvuToXML = null;
3901 * Shell command for the DJVU post processor
3902 * Default: pnmtopng, since ddjvu generates ppm output
3903 * Set this to false to output the ppm file directly.
3905 $wgDjvuPostProcessor = 'pnmtojpeg';
3907 * File extension for the DJVU post processor output
3909 $wgDjvuOutputExtension = 'jpg';
3912 * Enable the MediaWiki API for convenient access to
3913 * machine-readable data via api.php
3915 * See http://www.mediawiki.org/wiki/API
3917 $wgEnableAPI = true;
3920 * Allow the API to be used to perform write operations
3921 * (page edits, rollback, etc.) when an authorised user
3924 $wgEnableWriteAPI = true;
3927 * API module extensions
3928 * Associative array mapping module name to class name.
3929 * Extension modules may override the core modules.
3931 $wgAPIModules = array();
3932 $wgAPIMetaModules = array();
3933 $wgAPIPropModules = array();
3934 $wgAPIListModules = array();
3937 * Maximum amount of rows to scan in a DB query in the API
3938 * The default value is generally fine
3940 $wgAPIMaxDBRows = 5000;
3943 * The maximum size (in bytes) of an API result.
3944 * Don't set this lower than $wgMaxArticleSize*1024
3946 $wgAPIMaxResultSize = 8388608;
3949 * The maximum number of uncached diffs that can be retrieved in one API
3950 * request. Set this to 0 to disable API diffs altogether
3952 $wgAPIMaxUncachedDiffs = 1;
3955 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
3956 * API request logging
3958 $wgAPIRequestLog = false;
3961 * Cache the API help text for up to an hour. Disable this during API
3962 * debugging and development
3964 $wgAPICacheHelp = true;
3967 * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
3970 $wgAPICacheHelpTimeout = 60*60;
3973 * Parser test suite files to be run by parserTests.php when no specific
3974 * filename is passed to it.
3976 * Extensions may add their own tests to this array, or site-local tests
3977 * may be added via LocalSettings.php
3981 $wgParserTestFiles = array(
3982 "$IP/maintenance/parserTests.txt",
3986 * If configured, specifies target CodeReview installation to send test
3987 * result data from 'parserTests.php --upload'
3989 * Something like this:
3990 * $wgParserTestRemote = array(
3991 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
3992 * 'repo' => 'MediaWiki',
3993 * 'suite' => 'ParserTests',
3994 * 'path' => '/trunk/phase3', // not used client-side; for reference
3995 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
3998 $wgParserTestRemote = false;
4001 * Break out of framesets. This can be used to prevent external sites from
4002 * framing your site with ads.
4004 $wgBreakFrames = false;
4007 * Set this to an array of special page names to prevent
4008 * maintenance/updateSpecialPages.php from updating those pages.
4010 $wgDisableQueryPageUpdate = false;
4013 * Disable output compression (enabled by default if zlib is available)
4015 $wgDisableOutputCompression = false;
4018 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
4019 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
4020 * show a more obvious warning.
4022 $wgSlaveLagWarning = 10;
4023 $wgSlaveLagCritical = 30;
4026 * Parser configuration. Associative array with the following members:
4028 * class The class name
4030 * preprocessorClass The preprocessor class. Two classes are currently available:
4031 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
4032 * storage, and Preprocessor_DOM, which uses the DOM module for
4033 * temporary storage. Preprocessor_DOM generally uses less memory;
4034 * the speed of the two is roughly the same.
4036 * If this parameter is not given, it uses Preprocessor_DOM if the
4037 * DOM module is available, otherwise it uses Preprocessor_Hash.
4039 * The entire associative array will be passed through to the constructor as
4040 * the first parameter. Note that only Setup.php can use this variable --
4041 * the configuration will change at runtime via $wgParser member functions, so
4042 * the contents of this variable will be out-of-date. The variable can only be
4043 * changed during LocalSettings.php, in particular, it can't be changed during
4044 * an extension setup function.
4046 $wgParserConf = array(
4047 'class' => 'Parser',
4048 #'preprocessorClass' => 'Preprocessor_Hash',
4052 * LinkHolderArray batch size
4055 $wgLinkHolderBatchSize = 1000;
4058 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
4059 * use this value to override:
4061 $wgRegisterInternalExternals = false;
4064 * Hooks that are used for outputting exceptions. Format is:
4065 * $wgExceptionHooks[] = $funcname
4067 * $wgExceptionHooks[] = array( $class, $funcname )
4068 * Hooks should return strings or false
4070 $wgExceptionHooks = array();
4073 * Page property link table invalidation lists. When a page property
4074 * changes, this may require other link tables to be updated (eg
4075 * adding __HIDDENCAT__ means the hiddencat tracking category will
4076 * have been added, so the categorylinks table needs to be rebuilt).
4077 * This array can be added to by extensions.
4079 $wgPagePropLinkInvalidations = array(
4080 'hiddencat' => 'categorylinks',
4084 * Maximum number of links to a redirect page listed on
4085 * Special:Whatlinkshere/RedirectDestination
4087 $wgMaxRedirectLinksRetrieved = 500;
4090 * Maximum number of calls per parse to expensive parser functions such as
4093 $wgExpensiveParserFunctionLimit = 100;
4096 * Maximum number of pages to move at once when moving subpages with a page.
4098 $wgMaximumMovedPages = 100;
4101 * Fix double redirects after a page move.
4102 * Tends to conflict with page move vandalism, use only on a private wiki.
4104 $wgFixDoubleRedirects = false;
4107 * Max number of redirects to follow when resolving redirects.
4108 * 1 means only the first redirect is followed (default behavior).
4109 * 0 or less means no redirects are followed.
4111 $wgMaxRedirects = 1;
4114 * Array of invalid page redirect targets.
4115 * Attempting to create a redirect to any of the pages in this array
4116 * will make the redirect fail.
4117 * Userlogout is hard-coded, so it does not need to be listed here.
4118 * (bug 10569) Disallow Mypage and Mytalk as well.
4120 * As of now, this only checks special pages. Redirects to pages in
4121 * other namespaces cannot be invalidated by this variable.
4123 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
4126 * Array of namespaces to generate a sitemap for when the
4127 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4128 * nerated for all namespaces.
4130 $wgSitemapNamespaces = false;
4134 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4135 * will try to automatically create one. This feature can be disabled by set-
4136 * ting this variable false.
4138 $wgUseAutomaticEditSummaries = true;
4141 * Limit password attempts to X attempts per Y seconds per IP per account.
4142 * Requires memcached.
4144 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
4147 * Display user edit counts in various prominent places.
4149 $wgEdititis = false;
4152 * Enable the UniversalEditButton for browsers that support it
4153 * (currently only Firefox with an extension)
4154 * See http://universaleditbutton.org for more background information
4156 $wgUniversalEditButton = true;
4159 * Should we allow a broader set of characters in id attributes, per HTML5? If
4160 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
4161 * functionality is ready, it will be on by default with no option.
4163 * Currently this appears to work fine in Chrome 4 and 5, Firefox 3.5 and 3.6, IE6
4164 * and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
4165 * to work as anchors. So not quite ready for general use yet.
4167 $wgExperimentalHtmlIds = false;
4170 * Search form behavior
4171 * true = use Go & Search buttons
4172 * false = use Go button & Advanced search link
4174 $wgUseTwoButtonsSearchForm = true;
4177 * Search form behavior for Vector skin only
4178 * true = use an icon search button
4179 * false = use Go & Search buttons
4181 $wgVectorUseSimpleSearch = false;
4184 * Watch and unwatch as an icon rather than a link for Vector skin only
4185 * true = use an icon watch/unwatch button
4186 * false = use watch/unwatch text link
4188 $wgVectorUseIconWatch = false;
4191 * Add extra stylesheets for Vector - This is only being used so that we can play around with different options while
4192 * keeping our CSS code in the SVN and not having to change the main Vector styles. This will probably go away later on.
4193 * null = add no extra styles
4194 * array = list of style paths relative to skins/vector/
4196 $wgVectorExtraStyles = null;
4199 * Preprocessor caching threshold
4201 $wgPreprocessorCacheThreshold = 1000;
4204 * Allow filtering by change tag in recentchanges, history, etc
4205 * Has no effect if no tags are defined in valid_tag.
4207 $wgUseTagFilter = true;
4210 * Allow redirection to another page when a user logs in.
4211 * To enable, set to a string like 'Main Page'
4213 $wgRedirectOnLogin = null;
4216 * Characters to prevent during new account creations.
4217 * This is used in a regular expression character class during
4218 * registration (regex metacharacters like / are escaped).
4220 $wgInvalidUsernameCharacters = '@';
4223 * Character used as a delimiter when testing for interwiki userrights
4224 * (In Special:UserRights, it is possible to modify users on different
4225 * databases if the delimiter is used, e.g. Someuser@enwiki).
4227 * It is recommended that you have this delimiter in
4228 * $wgInvalidUsernameCharacters above, or you will not be able to
4229 * modify the user rights of those users via Special:UserRights
4231 $wgUserrightsInterwikiDelimiter = '@';
4234 * Configuration for processing pool control, for use in high-traffic wikis.
4235 * An implementation is provided in the PoolCounter extension.
4237 * This configuration array maps pool types to an associative array. The only
4238 * defined key in the associative array is "class", which gives the class name.
4239 * The remaining elements are passed through to the class as constructor
4240 * parameters. Example:
4242 * $wgPoolCounterConf = array( 'Article::view' => array(
4243 * 'class' => 'PoolCounter_Client',
4244 * ... any extension-specific options...
4247 $wgPoolCounterConf = null;
4250 * Use some particular type of external authentication. The specific
4251 * authentication module you use will normally require some extra settings to
4254 * null indicates no external authentication is to be used. Otherwise,
4255 * $wgExternalAuthType must be the name of a non-abstract class that extends
4258 * Core authentication modules can be found in includes/extauth/.
4260 $wgExternalAuthType = null;
4263 * Configuration for the external authentication. This may include arbitrary
4264 * keys that depend on the authentication mechanism. For instance,
4265 * authentication against another web app might require that the database login
4266 * info be provided. Check the file where your auth mechanism is defined for
4267 * info on what to put here.
4269 $wgExternalAuthConfig = array();
4272 * When should we automatically create local accounts when external accounts
4273 * already exist, if using ExternalAuth? Can have three values: 'never',
4274 * 'login', 'view'. 'view' requires the external database to support cookies,
4275 * and implies 'login'.
4277 * TODO: Implement 'view' (currently behaves like 'login').
4279 $wgAutocreatePolicy = 'login';
4282 * Policies for how each preference is allowed to be changed, in the presence
4283 * of external authentication. The keys are preference keys, e.g., 'password'
4284 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
4287 * - local: Allow changes to this pref through the wiki interface but only
4288 * apply them locally (default).
4289 * - semiglobal: Allow changes through the wiki interface and try to apply them
4290 * to the foreign database, but continue on anyway if that fails.
4291 * - global: Allow changes through the wiki interface, but only let them go
4292 * through if they successfully update the foreign database.
4293 * - message: Allow no local changes for linked accounts; replace the change
4294 * form with a message provided by the auth plugin, telling the user how to
4295 * change the setting externally (maybe providing a link, etc.). If the auth
4296 * plugin provides no message for this preference, hide it entirely.
4298 * Accounts that are not linked to an external account are never affected by
4299 * this setting. You may want to look at $wgHiddenPrefs instead.
4300 * $wgHiddenPrefs supersedes this option.
4302 * TODO: Implement message, global.
4304 $wgAllowPrefChange = array();
4308 * Settings for incoming cross-site AJAX requests:
4309 * Newer browsers support cross-site AJAX when the target resource allows requests
4310 * from the origin domain by the Access-Control-Allow-Origin header.
4311 * This is currently only used by the API (requests to api.php)
4312 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
4314 * '*' matches any number of characters
4315 * '?' matches any 1 character
4318 $wgCrossSiteAJAXdomains = array(
4319 'www.mediawiki.org',
4326 $wgCrossSiteAJAXdomains = array();
4329 * Domains that should not be allowed to make AJAX requests,
4330 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
4331 * Uses the same syntax as $wgCrossSiteAJAXdomains
4334 $wgCrossSiteAJAXdomainExceptions = array();
4337 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to raise PHP's memory limit if it's below this amount.
4339 $wgMemoryLimit = "50M";
4342 * To disable file delete/restore temporarily
4344 $wgUploadMaintenance = false;
4347 * Use old names for change_tags indices.
4349 $wgOldChangeTagsIndex = false;