includes/media/XMPValidate.php

   1 <?php
   2 /**
   3 * This contains some static methods for
   4 * validating XMP properties. See XMPInfo and XMPReader classes.
   5 *
   6 * Each of these functions take the same parameters
   7 * * an info array which is a subset of the XMPInfo::items array
   8 * * A value (passed as reference) to validate. This can be either a
   9 *       simple value or an array
  10 * * A boolean to determine if this is validating a simple or complex values
  11 *
  12 * It should be noted that when an array is being validated, typically the validation
  13 * function is called once for each value, and then once at the end for the entire array.
  14 *
  15 * These validation functions can also be used to modify the data. See the gps and flash one's
  16 * for example.
  17 *
  18 * @see http://www.adobe.com/devnet/xmp/pdfs/XMPSpecificationPart1.pdf starting at pg 28
  19 * @see http://www.adobe.com/devnet/xmp/pdfs/XMPSpecificationPart2.pdf starting at pg 11
  20 */
  21 class XMPValidate {
  22         /**
  23         * function to validate boolean properties ( True or False )
  24         *
  25         * @param $info Array information about current property
  26         * @param &$val Mixed current value to validate
  27         * @param $standalone Boolean if this is a simple property or array
  28         */
  29         public static function validateBoolean( $info, &$val, $standalone ) {
  30                 if ( !$standalone ) {
  31                         // this only validates standalone properties, not arrays, etc
  32                         return;
  33                 }
  34                 if ( $val !== 'True' && $val !== 'False' ) {
  35                         wfDebugLog( 'XMP', __METHOD__ . " Expected True or False but got $val" );
  36                         $val = null;
  37                 }
  38
  39         }
  40
  41         /**
  42         * function to validate rational properties ( 12/10 )
  43         *
  44         * @param $info Array information about current property
  45         * @param &$val Mixed current value to validate
  46         * @param $standalone Boolean if this is a simple property or array
  47         */
  48         public static function validateRational( $info, &$val, $standalone ) {
  49                 if ( !$standalone ) {
  50                         // this only validates standalone properties, not arrays, etc
  51                         return;
  52                 }
  53                 if ( !preg_match( '/^(?:-?\d+)\/(?:\d+[1-9]|[1-9]\d*)$/D', $val ) ) {
  54                         wfDebugLog( 'XMP', __METHOD__ . " Expected rational but got $val" );
  55                         $val = null;
  56                 }
  57
  58         }
  59
  60         /**
  61         * function to validate rating properties -1, 0-5
  62         *
  63         * if its outside of range put it into range.
  64         *
  65         * @see MWG spec
  66         * @param $info Array information about current property
  67         * @param &$val Mixed current value to validate
  68         * @param $standalone Boolean if this is a simple property or array
  69         */
  70         public static function validateRating( $info, &$val, $standalone ) {
  71                 if ( !$standalone ) {
  72                         // this only validates standalone properties, not arrays, etc
  73                         return;
  74                 }
  75                 if ( !preg_match( '/^[-+]?\d*(?:\.?\d*)$/D', $val )
  76                         || !is_numeric($val)
  77                  ) {
  78                         wfDebugLog( 'XMP', __METHOD__ . " Expected rating but got $val" );
  79                         $val = null;
  80                         return;
  81                 } else {
  82                         $nVal = (float) $val;
  83                         if ( $nVal < 0 ) {
  84                                 // We do < 0 here instead of < -1 here, since
  85                                 // the values between 0 and -1 are also illegal
  86                                 // as -1 is meant as a special reject rating.
  87                                 wfDebugLog( 'XMP', __METHOD__ . " Rating too low, setting to -1 (Rejected)");
  88                                 $val = '-1';
  89                                 return;
  90                         }
  91                         if ( $nVal > 5 ) {
  92                                 wfDebugLog( 'XMP', __METHOD__ . " Rating too high, setting to 5");
  93                                 $val = '5';
  94                                 return;
  95                         }
  96                 }
  97         }
  98
  99         /**
 100         * function to validate integers
 101         *
 102         * @param $info Array information about current property
 103         * @param &$val Mixed current value to validate
 104         * @param $standalone Boolean if this is a simple property or array
 105         */
 106         public static function validateInteger( $info, &$val, $standalone ) {
 107                 if ( !$standalone ) {
 108                         // this only validates standalone properties, not arrays, etc
 109                         return;
 110                 }
 111                 if ( !preg_match( '/^[-+]?\d+$/D', $val ) ) {
 112                         wfDebugLog( 'XMP', __METHOD__ . " Expected integer but got $val" );
 113                         $val = null;
 114                 }
 115
 116         }
 117
 118         /**
 119         * function to validate properties with a fixed number of allowed
 120         * choices. (closed choice)
 121         *
 122         * @param $info Array information about current property
 123         * @param &$val Mixed current value to validate
 124         * @param $standalone Boolean if this is a simple property or array
 125         */
 126         public static function validateClosed( $info, &$val, $standalone ) {
 127                 if ( !$standalone ) {
 128                         // this only validates standalone properties, not arrays, etc
 129                         return;
 130                 }
 131
 132                 //check if its in a numeric range
 133                 $inRange = false;
 134                 if ( isset( $info['rangeLow'] )
 135                         && isset( $info['rangeHigh'] )
 136                         && is_numeric( $val )
 137                         && ( intval( $val ) <= $info['rangeHigh'] )
 138                         && ( intval( $val ) >= $info['rangeLow'] )
 139                 ) {
 140                         $inRange = true;
 141                 }
 142
 143                 if ( !isset( $info['choices'][$val] ) && !$inRange ) {
 144                         wfDebugLog( 'XMP', __METHOD__ . " Expected closed choice, but got $val" );
 145                         $val = null;
 146                 }
 147         }
 148
 149         /**
 150         * function to validate and modify flash structure
 151         *
 152         * @param $info Array information about current property
 153         * @param &$val Mixed current value to validate
 154         * @param $standalone Boolean if this is a simple property or array
 155         */
 156         public static function validateFlash( $info, &$val, $standalone ) {
 157                 if ( $standalone ) {
 158                         // this only validates flash structs, not individual properties
 159                         return;
 160                 }
 161                 if ( !( isset( $val['Fired'] )
 162                         && isset( $val['Function'] )
 163                         && isset( $val['Mode'] )
 164                         && isset( $val['RedEyeMode'] )
 165                         && isset( $val['Return'] )
 166                 ) ) {
 167                         wfDebugLog( 'XMP', __METHOD__ . " Flash structure did not have all the required components" );
 168                         $val = null;
 169                 } else {
 170                         $val = ( "\0" | ( $val['Fired'] === 'True' )
 171                                 | ( intval( $val['Return'] ) << 1 )
 172                                 | ( intval( $val['Mode'] ) << 3 )
 173                                 | ( ( $val['Function'] === 'True' ) << 5 )
 174                                 | ( ( $val['RedEyeMode'] === 'True' ) << 6 ) );
 175                 }
 176         }
 177
 178         /**
 179         * function to validate LangCode properties ( en-GB, etc )
 180         *
 181         * This is just a naive check to make sure it somewhat looks like a lang code.
 182         *
 183         * @see rfc 3066
 184         * @see http://www.adobe.com/devnet/xmp/pdfs/XMPSpecificationPart1.pdf page 30 (section 8.2.2.5)
 185         *
 186         * @param $info Array information about current property
 187         * @param &$val Mixed current value to validate
 188         * @param $standalone Boolean if this is a simple property or array
 189         */
 190         public static function validateLangCode( $info, &$val, $standalone ) {
 191                 if ( !$standalone ) {
 192                         // this only validates standalone properties, not arrays, etc
 193                         return;
 194                 }
 195                 if ( !preg_match( '/^[-A-Za-z0-9]{2,}$/D', $val) ) {
 196                         //this is a rather naive check.
 197                         wfDebugLog( 'XMP', __METHOD__ . " Expected Lang code but got $val" );
 198                         $val = null;
 199                 }
 200
 201         }
 202
 203         /**
 204         * function to validate date properties, and convert to Exif format.
 205         *
 206         * @param $info Array information about current property
 207         * @param &$val Mixed current value to validate. Converts to TS_EXIF as a side-effect.
 208         * @param $standalone Boolean if this is a simple property or array
 209         */
 210         public static function validateDate( $info, &$val, $standalone ) {
 211                 if ( !$standalone ) {
 212                         // this only validates standalone properties, not arrays, etc
 213                         return;
 214                 }
 215                 $res = array();
 216                 if ( !preg_match(
 217                         /* ahh! scary regex... */
 218                         '/^([0-3]\d{3})(?:-([01]\d)(?:-([0-3]\d)(?:T([0-2]\d):([0-6]\d)(?::([0-6]\d)(?:\.\d+)?)?([-+]\d{2}:\d{2}|Z)?)?)?)?$/D'
 219                         , $val, $res)
 220                 ) {
 221                         wfDebugLog( 'XMP', __METHOD__ . " Expected date but got $val" );
 222                         $val = null;
 223                 } else {
 224                         /*
 225                          * $res is formatted as follows:
 226                          * 0 -> full date.
 227                          * 1 -> year, 2-> month, 3-> day, 4-> hour, 5-> minute, 6->second
 228                          * 7-> Timezone specifier (Z or something like +12:30 )
 229                          * many parts are optional, some aren't. For example if you specify
 230                          * minute, you must specify hour, day, month, and year but not second or TZ.
 231                          */
 232
 233                         /*
 234                          * First of all, if year = 0000, Something is wrongish,
 235                          * so don't extract. This seems to happen when
 236                          * some programs convert between metadata formats.
 237                          */
 238                         if ( $res[1] === '0000' ) {
 239                                 wfDebugLog( 'XMP', __METHOD__ . " Invalid date (year 0): $val" );
 240                                 $val = null;
 241                                 return;
 242                         }
 243                         //if month, etc unspecified, full out as 01.
 244                         $res[2] = isset( $res[2] ) ? $res[2] : '01'; //month
 245                         $res[3] = isset( $res[3] ) ? $res[3] : '01'; //day
 246                         if ( !isset( $res[4] ) ) { //hour
 247                                 //just have the year month day
 248                                 $val = $res[1] . ':' . $res[2] . ':' . $res[3];
 249                                 return;
 250                         }
 251                         //if hour is set, so is minute or regex above will fail.
 252                         //Extra check for empty string necessary due to TZ but no second case.
 253                         $res[6] = isset( $res[6] ) && $res[6] != '' ? $res[6] : '00';
 254
 255                         if ( !isset( $res[7] ) || $res[7] === 'Z' ) {
 256                                 $val = $res[1] . ':' . $res[2] . ':' . $res[3]
 257                                         . ' ' . $res[4] . ':' . $res[5] . ':' . $res[6];
 258                                 return;
 259                         }
 260
 261                         //do timezone processing. We've already done the case that tz = Z.
 262
 263                         $unix = wfTimestamp( TS_UNIX, $res[1] . $res[2] . $res[3] . $res[4] . $res[5] . $res[6] );
 264                         $offset = intval( substr( $res[7], 1, 2 ) ) * 60 * 60;
 265                         $offset += intval( substr( $res[7], 4, 2 ) ) * 60;
 266                         if ( substr( $res[7], 0, 1 ) === '-' ) {
 267                                 $offset = -$offset;
 268                         }
 269                         $val = wfTimestamp( TS_EXIF, $unix + $offset );
 270                 }
 271
 272         }
 273
 274         /** function to validate, and more importantly
 275          * translate the XMP DMS form of gps coords to
 276          * the decimal form we use.
 277          *
 278          * @see http://www.adobe.com/devnet/xmp/pdfs/XMPSpecificationPart2.pdf
 279          *        section 1.2.7.4 on page 23
 280          *
 281          * @param $info Array unused (info about prop)
 282          * @param &$val String GPS string in either DDD,MM,SSk or
 283          *           or DDD,MM.mmk form
 284          * @param $standalone Boolean if its a simple prop (should always be true)
 285          */
 286         public static function validateGPS ( $info, &$val, $standalone ) {
 287                 if ( !$standalone ) {
 288                         return;
 289                 }
 290
 291                 $m = array();
 292                 if ( preg_match(
 293                         '/(\d{1,3}),(\d{1,2}),(\d{1,2})([NWSE])/D',
 294                         $val, $m )
 295                 ) {
 296                         $coord = intval( $m[1] );
 297                         $coord += intval( $m[2] ) * (1/60);
 298                         $coord += intval( $m[3] ) * (1/3600);
 299                         if ( $m[4] === 'S' || $m[4] === 'W' ) {
 300                                 $coord = -$coord;
 301                         }
 302                         $val = $coord;
 303                         return;
 304                 } elseif ( preg_match(
 305                         '/(\d{1,3}),(\d{1,2}(?:.\d*)?)([NWSE])/D',
 306                         $val, $m )
 307                 ) {
 308                         $coord = intval( $m[1] );
 309                         $coord += floatval( $m[2] ) * (1/60);
 310                         if ( $m[3] === 'S' || $m[3] === 'W' ) {
 311                                 $coord = -$coord;
 312                         }
 313                         $val = $coord;
 314                         return;
 315
 316                 } else {
 317                         wfDebugLog( 'XMP', __METHOD__
 318                                 . " Expected GPSCoordinate, but got $val." );
 319                         $val = null;
 320                         return;
 321                 }
 322         }
 323 }