a886751d2c6b3a246948aa6becb894b228dcab1c
8 * To customize your installation, edit "LocalSettings.php". If you make
9 * changes here, they will be lost on next upgrade of MediaWiki!
11 * Note that since all these string interpolations are expanded
12 * before LocalSettings is included, if you localize something
13 * like $wgScriptPath, you must also localize everything that
16 * Documentation is in the source and on:
17 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
21 * @cond file_level_code
22 * This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
24 if( !defined( 'MEDIAWIKI' ) ) {
25 echo "This file is part of MediaWiki and is not a valid entry point\n";
30 # Create a site configuration object. Not used for much in a default install
31 if ( !defined( 'MW_PHP4' ) ) {
32 require_once( "$IP/includes/SiteConfiguration.php" );
33 $wgConf = new SiteConfiguration
;
37 /** MediaWiki version number */
38 $wgVersion = '1.17alpha';
40 /** Name of the site. It must be changed in LocalSettings.php */
41 $wgSitename = 'MediaWiki';
44 * URL of the server. It will be automatically built including https mode.
48 * $wgServer = http://example.com
51 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
52 * wrong server, it will redirect incorrectly after you save a page. In that
53 * case, set this variable to fix it.
57 /** @cond file_level_code */
58 if( isset( $_SERVER['SERVER_NAME'] ) ) {
59 $serverName = $_SERVER['SERVER_NAME'];
60 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
61 $serverName = $_SERVER['HOSTNAME'];
62 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
63 $serverName = $_SERVER['HTTP_HOST'];
64 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
65 $serverName = $_SERVER['SERVER_ADDR'];
67 $serverName = 'localhost';
70 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
72 $wgServer = $wgProto.'://' . $serverName;
73 # If the port is a non-standard one, add it to the URL
74 if( isset( $_SERVER['SERVER_PORT'] )
75 && !strpos( $serverName, ':' )
76 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
77 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
79 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
83 /************************************************************************//**
84 * @name Script path settings
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example.
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
121 * The extension to append to script names by default. This can either be .php
124 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
125 * variable is provided to support those providers.
127 $wgScriptExtension = '.php';
130 * The URL path to index.php.
132 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
137 * The URL path to redirect.php. This is a script that is used by the Nostalgia
140 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
142 $wgRedirectScript = false; ///< defaults to
146 * The URL path to load.php.
148 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
150 $wgLoadScript = false;
152 /************************************************************************//**
153 * @name URLs and file paths
155 * These various web and file path variables are set to their defaults
156 * in Setup.php if they are not explicitly set from LocalSettings.php.
157 * If you do override them, be sure to set them all!
159 * These will relatively rarely need to be set manually, unless you are
160 * splitting style sheets or images outside the main document root.
162 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
163 * the host part, that starts with a slash. In most cases a full URL is also
164 * acceptable. A "directory" is a local file path.
166 * In both paths and directories, trailing slashes should not be included.
172 * The URL path of the skins directory. Defaults to "{$wgScriptPath}/skins"
174 $wgStylePath = false;
175 $wgStyleSheetPath = &$wgStylePath;
178 * The URL path of the skins directory. Should not point to an external domain.
179 * Defaults to "{$wgScriptPath}/skins".
181 $wgLocalStylePath = false;
184 * The URL path of the extensions directory.
185 * Defaults to "{$wgScriptPath}/extensions".
187 $wgExtensionAssetsPath = false;
190 * Filesystem stylesheets directory. Defaults to "{$IP}/skins"
192 $wgStyleDirectory = false;
195 * The URL path for primary article page views. This path should contain $1,
196 * which is replaced by the article title.
198 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
201 $wgArticlePath = false;
204 * The URL path for the images directory. Defaults to "{$wgScriptPath}/images"
206 $wgUploadPath = false;
209 * The filesystem path of the images directory. Defaults to "{$IP}/images".
211 $wgUploadDirectory = false;
214 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
215 * Defaults to "{$wgStylePath}/common/images/wiki.png".
220 * The URL path of the shortcut icon.
222 $wgFavicon = '/favicon.ico';
225 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
226 * Defaults to no icon.
228 $wgAppleTouchIcon = false;
231 * The URL path of the math directory. Defaults to "{$wgUploadPath}/math".
233 * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
234 * set up mathematical formula display.
239 * The filesystem path of the math directory.
240 * Defaults to "{$wgUploadDirectory}/math".
242 * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
243 * set up mathematical formula display.
245 $wgMathDirectory = false;
248 * The local filesystem path to a temporary directory. This is not required to
251 * Defaults to "{$wgUploadDirectory}/tmp".
253 $wgTmpDirectory = false;
256 * If set, this URL is added to the start of $wgUploadPath to form a complete
259 $wgUploadBaseUrl = "";
262 * To set 'pretty' URL paths for actions other than
263 * plain page views, add to this array. For instance:
264 * 'edit' => "$wgScriptPath/edit/$1"
266 * There must be an appropriate script or rewrite rule
267 * in place to handle these URLs.
269 $wgActionPaths = array();
273 /************************************************************************//**
274 * @name Files and file uploads
278 /** Uploads have to be specially set up to be secure */
279 $wgEnableUploads = false;
281 /** Allows to move images and other media files */
282 $wgAllowImageMoving = true;
285 * These are additional characters that should be replaced with '-' in file names
287 $wgIllegalFileChars = ":";
290 * @deprecated use $wgDeletedDirectory
292 $wgFileStore = array();
295 * What directory to place deleted uploads in
297 $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted
300 * Set this to true if you use img_auth and want the user to see details on why access failed.
302 $wgImgAuthDetails = false;
305 * If this is enabled, img_auth.php will not allow image access unless the wiki
306 * is private. This improves security when image uploads are hosted on a
309 $wgImgAuthPublicTest = true;
312 * File repository structures
314 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
315 * an array of such structures. Each repository structure is an associative
316 * array of properties configuring the repository.
318 * Properties required for all repos:
319 * - class The class name for the repository. May come from the core or an extension.
320 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
322 * - name A unique name for the repository.
324 * For most core repos:
325 * - url Base public URL
326 * - hashLevels The number of directory levels for hash-based division of files
327 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
328 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
330 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
331 * determines whether filenames implicitly start with a capital letter.
332 * The current implementation may give incorrect description page links
333 * when the local $wgCapitalLinks and initialCapital are mismatched.
334 * - pathDisclosureProtection
335 * May be 'paranoid' to remove all parameters from error messages, 'none' to
336 * leave the paths in unchanged, or 'simple' to replace paths with
337 * placeholders. Default for LocalRepo is 'simple'.
338 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
340 * - directory The local filesystem directory where public files are stored. Not used for
342 * - thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
343 * - thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
346 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
347 * for local repositories:
348 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
349 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
350 * http://en.wikipedia.org/w
351 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
352 * $wgScriptExtension, e.g. .php5 defaults to .php
354 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
355 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
356 * $wgFetchCommonsDescriptions.
359 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
360 * equivalent to the corresponding member of $wgDBservers
361 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
362 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
365 * - apibase Use for the foreign API's URL
366 * - apiThumbCacheExpiry How long to locally cache thumbs for
368 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
369 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
371 $wgLocalFileRepo = false;
373 /** @see $wgLocalFileRepo */
374 $wgForeignFileRepos = array();
377 * Use Commons as a remote file repository. Essentially a wrapper, when this
378 * is enabled $wgForeignFileRepos will point at Commons with a set of default
381 $wgUseInstantCommons = false;
384 * Show EXIF data, on by default if available.
385 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
387 * NOTE FOR WINDOWS USERS:
388 * To enable EXIF functions, add the folloing lines to the
389 * "Windows extensions" section of php.ini:
391 * extension=extensions/php_mbstring.dll
392 * extension=extensions/php_exif.dll
394 $wgShowEXIF = function_exists( 'exif_read_data' );
397 * If you operate multiple wikis, you can define a shared upload path here.
398 * Uploads to this wiki will NOT be put there - they will be put into
399 * $wgUploadDirectory.
400 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
401 * no file of the given name is found in the local repository (for [[File:..]],
402 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
405 * Note that these configuration settings can now be defined on a per-
406 * repository basis for an arbitrary number of file repositories, using the
407 * $wgForeignFileRepos variable.
409 $wgUseSharedUploads = false;
410 /** Full path on the web server where shared uploads can be found */
411 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
412 /** Fetch commons image description pages and display them on the local wiki? */
413 $wgFetchCommonsDescriptions = false;
414 /** Path on the file system where shared uploads can be found. */
415 $wgSharedUploadDirectory = "/var/www/wiki3/images";
416 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
417 $wgSharedUploadDBname = false;
418 /** Optional table prefix used in database. */
419 $wgSharedUploadDBprefix = '';
420 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
421 $wgCacheSharedUploads = true;
423 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
424 * The timeout for copy uploads is set by $wgHTTPTimeout.
426 $wgAllowCopyUploads = false;
428 * Allow asynchronous copy uploads.
429 * This feature is experimental.
431 $wgAllowAsyncCopyUploads = false;
434 * Max size for uploads, in bytes. Applies to all uploads.
436 $wgMaxUploadSize = 1024*1024*100; # 100MB
439 * Point the upload navigation link to an external URL
440 * Useful if you want to use a shared repository by default
441 * without disabling local uploads (use $wgEnableUploads = false for that)
442 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
444 $wgUploadNavigationUrl = false;
447 * Point the upload link for missing files to an external URL, as with
448 * $wgUploadNavigationUrl. The URL will get (?|&)wpDestFile=<filename>
449 * appended to it as appropriate.
451 $wgUploadMissingFileUrl = false;
454 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
455 * generating them on render and outputting a static URL. This is necessary if some of your
456 * apache servers don't have read/write access to the thumbnail path.
459 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
461 $wgThumbnailScriptPath = false;
462 $wgSharedThumbnailScriptPath = false;
465 * Set this to false if you do not want MediaWiki to divide your images
466 * directory into many subdirectories, for improved performance.
468 * It's almost always good to leave this enabled. In previous versions of
469 * MediaWiki, some users set this to false to allow images to be added to the
470 * wiki by simply copying them into $wgUploadDirectory and then running
471 * maintenance/rebuildImages.php to register them in the database. This is no
472 * longer recommended, use maintenance/importImages.php instead.
474 * Note that this variable may be ignored if $wgLocalFileRepo is set.
476 $wgHashedUploadDirectory = true;
479 * Set the following to false especially if you have a set of files that need to
480 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
483 $wgHashedSharedUploadDirectory = true;
486 * Base URL for a repository wiki. Leave this blank if uploads are just stored
487 * in a shared directory and not meant to be accessible through a separate wiki.
488 * Otherwise the image description pages on the local wiki will link to the
489 * image description page on this wiki.
491 * Please specify the namespace, as in the example below.
493 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
496 * This is the list of preferred extensions for uploading files. Uploading files
497 * with extensions not in this list will trigger a warning.
499 * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
500 * such as odt or doc, and untrusted users are allowed to upload files, then
501 * your wiki will be vulnerable to cross-site request forgery (CSRF).
503 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
505 /** Files with these extensions will never be allowed as uploads. */
506 $wgFileBlacklist = array(
507 # HTML may contain cookie-stealing JavaScript and web bugs
508 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
509 # PHP scripts may execute arbitrary code on the server
510 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
511 # Other types that may be interpreted by some servers
512 'shtml', 'jhtml', 'pl', 'py', 'cgi',
513 # May contain harmful executables for Windows victims
514 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
517 * Files with these mime types will never be allowed as uploads
518 * if $wgVerifyMimeType is enabled.
520 $wgMimeTypeBlacklist = array(
521 # HTML may contain cookie-stealing JavaScript and web bugs
522 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
523 # PHP scripts may execute arbitrary code on the server
524 'application/x-php', 'text/x-php',
525 # Other types that may be interpreted by some servers
526 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
527 # Client-side hazards on Internet Explorer
528 'text/scriptlet', 'application/x-msdownload',
529 # Windows metafile, client-side vulnerability on some systems
530 'application/x-msmetafile',
531 # A ZIP file may be a valid Java archive containing an applet which exploits the
532 # same-origin policy to steal cookies
534 # MS Office OpenXML and other Open Package Conventions files are zip files
535 # and thus blacklisted just as other zip files
536 'application/x-opc+zip',
540 * This is a flag to determine whether or not to check file extensions on upload.
542 * WARNING: setting this to false is insecure for public wikis.
544 $wgCheckFileExtensions = true;
547 * If this is turned off, users may override the warning for files not covered
548 * by $wgFileExtensions.
550 * WARNING: setting this to false is insecure for public wikis.
552 $wgStrictFileExtensions = true;
554 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
555 $wgUploadSizeWarning = false;
558 * list of trusted media-types and mime types.
559 * Use the MEDIATYPE_xxx constants to represent media types.
560 * This list is used by File::isSafeFile
562 * Types not listed here will have a warning about unsafe content
563 * displayed on the images description page. It would also be possible
564 * to use this for further restrictions, like disabling direct
565 * [[media:...]] links for non-trusted formats.
567 $wgTrustedMediaFormats = array(
568 MEDIATYPE_BITMAP
, //all bitmap formats
569 MEDIATYPE_AUDIO
, //all audio formats
570 MEDIATYPE_VIDEO
, //all plain video formats
571 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
572 "application/pdf", //PDF files
573 #"application/x-shockwave-flash", //flash/shockwave movie
577 * Plugins for media file type handling.
578 * Each entry in the array maps a MIME type to a class name
580 $wgMediaHandlers = array(
581 'image/jpeg' => 'BitmapHandler',
582 'image/png' => 'PNGHandler',
583 'image/gif' => 'GIFHandler',
584 'image/tiff' => 'TiffHandler',
585 'image/x-ms-bmp' => 'BmpHandler',
586 'image/x-bmp' => 'BmpHandler',
587 'image/svg+xml' => 'SvgHandler', // official
588 'image/svg' => 'SvgHandler', // compat
589 'image/vnd.djvu' => 'DjVuHandler', // official
590 'image/x.djvu' => 'DjVuHandler', // compat
591 'image/x-djvu' => 'DjVuHandler', // compat
595 * Resizing can be done using PHP's internal image libraries or using
596 * ImageMagick or another third-party converter, e.g. GraphicMagick.
597 * These support more file formats than PHP, which only supports PNG,
598 * GIF, JPG, XBM and WBMP.
600 * Use Image Magick instead of PHP builtin functions.
602 $wgUseImageMagick = false;
603 /** The convert command shipped with ImageMagick */
604 $wgImageMagickConvertCommand = '/usr/bin/convert';
606 /** Sharpening parameter to ImageMagick */
607 $wgSharpenParameter = '0x0.4';
609 /** Reduction in linear dimensions below which sharpening will be enabled */
610 $wgSharpenReductionThreshold = 0.85;
613 * Temporary directory used for ImageMagick. The directory must exist. Leave
614 * this set to false to let ImageMagick decide for itself.
616 $wgImageMagickTempDir = false;
619 * Use another resizing converter, e.g. GraphicMagick
620 * %s will be replaced with the source path, %d with the destination
621 * %w and %h will be replaced with the width and height.
623 * Example for GraphicMagick:
625 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
628 * Leave as false to skip this.
630 $wgCustomConvertCommand = false;
633 * Scalable Vector Graphics (SVG) may be uploaded as images.
634 * Since SVG support is not yet standard in browsers, it is
635 * necessary to rasterize SVGs to PNG as a fallback format.
637 * An external program is required to perform this conversion.
639 $wgSVGConverters = array(
640 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
641 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
642 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
643 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
644 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
645 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
647 /** Pick a converter defined in $wgSVGConverters */
648 $wgSVGConverter = 'ImageMagick';
649 /** If not in the executable PATH, specify the SVG converter path. */
650 $wgSVGConverterPath = '';
651 /** Don't scale a SVG larger than this */
652 $wgSVGMaxSize = 2048;
655 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
656 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
657 * crap files as images. When this directive is on, <title> will be allowed in files with
658 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
659 * and doesn't send appropriate MIME types for SVG images.
661 $wgAllowTitlesInSVG = false;
664 * Don't thumbnail an image if it will use too much working memory.
665 * Default is 50 MB if decompressed to RGBA form, which corresponds to
666 * 12.5 million pixels or 3500x3500
668 $wgMaxImageArea = 1.25e7
;
670 * Force thumbnailing of animated GIFs above this size to a single
671 * frame instead of an animated thumbnail. As of MW 1.17 this limit
672 * is checked against the total size of all frames in the animation.
673 * It probably makes sense to keep this equal to $wgMaxImageArea.
675 $wgMaxAnimatedGifArea = 1.25e7
;
677 * Browsers don't support TIFF inline generally...
678 * For inline display, we need to convert to PNG or JPEG.
679 * Note scaling should work with ImageMagick, but may not with GD scaling.
683 * // PNG is lossless, but inefficient for photos
684 * $wgTiffThumbnailType = array( 'png', 'image/png' );
685 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
686 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
689 $wgTiffThumbnailType = false;
692 * If rendered thumbnail files are older than this timestamp, they
693 * will be rerendered on demand as if the file didn't already exist.
694 * Update if there is some need to force thumbs and SVG rasterizations
695 * to rerender, such as fixes to rendering bugs.
697 $wgThumbnailEpoch = '20030516000000';
700 * If set, inline scaled images will still produce <img> tags ready for
701 * output instead of showing an error message.
703 * This may be useful if errors are transitory, especially if the site
704 * is configured to automatically render thumbnails on request.
706 * On the other hand, it may obscure error conditions from debugging.
707 * Enable the debug log or the 'thumbnail' log group to make sure errors
708 * are logged to a file for review.
710 $wgIgnoreImageErrors = false;
713 * Allow thumbnail rendering on page view. If this is false, a valid
714 * thumbnail URL is still output, but no file will be created at
715 * the target location. This may save some time if you have a
716 * thumb.php or 404 handler set up which is faster than the regular
719 $wgGenerateThumbnailOnParse = true;
722 * Show thumbnails for old images on the image description page
724 $wgShowArchiveThumbnails = true;
726 /** Obsolete, always true, kept for compatibility with extensions */
727 $wgUseImageResize = true;
731 * Internal name of virus scanner. This servers as a key to the
732 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
733 * null, every file uploaded will be scanned for viruses.
738 * Configuration for different virus scanners. This an associative array of
739 * associative arrays. It contains one setup array per known scanner type.
740 * The entry is selected by $wgAntivirus, i.e.
741 * valid values for $wgAntivirus are the keys defined in this array.
743 * The configuration array for each scanner contains the following keys:
744 * "command", "codemap", "messagepattern":
746 * "command" is the full command to call the virus scanner - %f will be
747 * replaced with the name of the file to scan. If not present, the filename
748 * will be appended to the command. Note that this must be overwritten if the
749 * scanner is not in the system path; in that case, plase set
750 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
753 * "codemap" is a mapping of exit code to return codes of the detectVirus
754 * function in SpecialUpload.
755 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
756 * the scan to be failed. This will pass the file if $wgAntivirusRequired
758 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
759 * the file to have an usupported format, which is probably imune to
760 * virusses. This causes the file to pass.
761 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
762 * no virus was found.
763 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
765 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
767 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
768 * output. The relevant part should be matched as group one (\1).
769 * If not defined or the pattern does not match, the full message is shown to the user.
771 $wgAntivirusSetup = array(
775 'command' => "clamscan --no-summary ",
778 "0" => AV_NO_VIRUS
, # no virus
779 "1" => AV_VIRUS_FOUND
, # virus found
780 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
781 "*" => AV_SCAN_FAILED
, # else scan failed
784 'messagepattern' => '/.*?:(.*)/sim',
789 'command' => "f-prot ",
792 "0" => AV_NO_VIRUS
, # no virus
793 "3" => AV_VIRUS_FOUND
, # virus found
794 "6" => AV_VIRUS_FOUND
, # virus found
795 "*" => AV_SCAN_FAILED
, # else scan failed
798 'messagepattern' => '/.*?Infection:(.*)$/m',
803 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
804 $wgAntivirusRequired = true;
806 /** Determines if the mime type of uploaded files should be checked */
807 $wgVerifyMimeType = true;
809 /** Sets the mime type definition file to use by MimeMagic.php. */
810 $wgMimeTypeFile = "includes/mime.types";
811 #$wgMimeTypeFile= "/etc/mime.types";
812 #$wgMimeTypeFile= null; #use built-in defaults only.
814 /** Sets the mime type info file to use by MimeMagic.php. */
815 $wgMimeInfoFile= "includes/mime.info";
816 #$wgMimeInfoFile= null; #use built-in defaults only.
819 * Switch for loading the FileInfo extension by PECL at runtime.
820 * This should be used only if fileinfo is installed as a shared object
821 * or a dynamic library.
823 $wgLoadFileinfoExtension = false;
825 /** Sets an external mime detector program. The command must print only
826 * the mime type to standard output.
827 * The name of the file to process will be appended to the command given here.
828 * If not set or NULL, mime_content_type will be used if available.
831 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
834 $wgMimeDetectorCommand = null;
837 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
838 * things, because only a few types of images are needed and file extensions
841 $wgTrivialMimeDetection = false;
844 * Additional XML types we can allow via mime-detection.
845 * array = ( 'rootElement' => 'associatedMimeType' )
847 $wgXMLMimeTypes = array(
848 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
849 'svg' => 'image/svg+xml',
850 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
851 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
852 'html' => 'text/html', // application/xhtml+xml?
856 * Limit images on image description pages to a user-selectable limit. In order
857 * to reduce disk usage, limits can only be selected from a list.
858 * The user preference is saved as an array offset in the database, by default
859 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
860 * change it if you alter the array (see bug 8858).
861 * This is the list of settings the user can choose from:
863 $wgImageLimits = array (
869 array(10000,10000) );
872 * Adjust thumbnails on image pages according to a user setting. In order to
873 * reduce disk usage, the values can only be selected from a list. This is the
874 * list of settings the user can choose from:
876 $wgThumbLimits = array(
886 * Default parameters for the <gallery> tag
888 $wgGalleryOptions = array (
889 'imagesPerRow' => 4, // Default number of images per-row in the gallery
890 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
891 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
892 'captionLength' => 20, // Length of caption to truncate (in characters)
893 'showBytes' => true, // Show the filesize in bytes in categories
897 * Adjust width of upright images when parameter 'upright' is used
898 * This allows a nicer look for upright images without the need to fix the width
899 * by hardcoded px in wiki sourcecode.
901 $wgThumbUpright = 0.75;
904 * Default value for chmoding of new directories.
906 $wgDirectoryMode = 0777;
910 * Path of the djvudump executable
911 * Enable this and $wgDjvuRenderer to enable djvu rendering
913 # $wgDjvuDump = 'djvudump';
917 * Path of the ddjvu DJVU renderer
918 * Enable this and $wgDjvuDump to enable djvu rendering
920 # $wgDjvuRenderer = 'ddjvu';
921 $wgDjvuRenderer = null;
924 * Path of the djvutxt DJVU text extraction utility
925 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
927 # $wgDjvuTxt = 'djvutxt';
931 * Path of the djvutoxml executable
932 * This works like djvudump except much, much slower as of version 3.5.
934 * For now I recommend you use djvudump instead. The djvuxml output is
935 * probably more stable, so we'll switch back to it as soon as they fix
936 * the efficiency problem.
937 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
939 # $wgDjvuToXML = 'djvutoxml';
944 * Shell command for the DJVU post processor
945 * Default: pnmtopng, since ddjvu generates ppm output
946 * Set this to false to output the ppm file directly.
948 $wgDjvuPostProcessor = 'pnmtojpeg';
950 * File extension for the DJVU post processor output
952 $wgDjvuOutputExtension = 'jpg';
954 /** @} */ # end of file uploads }
956 /************************************************************************//**
957 * @name Email settings
962 * Site admin email address.
964 $wgEmergencyContact = 'wikiadmin@' . $serverName;
967 * Password reminder email address.
969 * The address we should use as sender when a user is requesting his password.
971 $wgPasswordSender = 'MediaWiki Mail <apache@' . $serverName . '>';
973 unset($serverName); # Don't leak local variables to global scope
976 * Dummy address which should be accepted during mail send action.
977 * It might be necessary to adapt the address or to set it equal
978 * to the $wgEmergencyContact address.
980 $wgNoReplyAddress = 'reply@not.possible';
983 * Set to true to enable the e-mail basic features:
984 * Password reminders, etc. If sending e-mail on your
985 * server doesn't work, you might want to disable this.
987 $wgEnableEmail = true;
990 * Set to true to enable user-to-user e-mail.
991 * This can potentially be abused, as it's hard to track.
993 $wgEnableUserEmail = true;
996 * Set to true to put the sending user's email in a Reply-To header
997 * instead of From. ($wgEmergencyContact will be used as From.)
999 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1000 * which can cause problems with SPF validation and leak recipient addressses
1001 * when bounces are sent to the sender.
1003 $wgUserEmailUseReplyTo = false;
1006 * Minimum time, in hours, which must elapse between password reminder
1007 * emails for a given account. This is to prevent abuse by mail flooding.
1009 $wgPasswordReminderResendTime = 24;
1012 * The time, in seconds, when an emailed temporary password expires.
1014 $wgNewPasswordExpiry = 3600 * 24 * 7;
1018 * For using a direct (authenticated) SMTP server connection.
1019 * Default to false or fill an array :
1021 * "host" => 'SMTP domain',
1022 * "IDHost" => 'domain for MessageID',
1024 * "auth" => true/false,
1025 * "username" => user,
1026 * "password" => password
1031 /** For email notification on page changes */
1032 $wgPasswordSender = $wgEmergencyContact;
1035 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1036 * from $wgEmergencyContact
1038 $wgEnotifFromEditor = false;
1040 // TODO move UPO to preferences probably ?
1041 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1042 # If set to false, the corresponding input form on the user preference page is suppressed
1043 # It call this to be a "user-preferences-option (UPO)"
1046 * Require email authentication before sending mail to an email addres. This is
1047 * highly recommended. It prevents MediaWiki from being used as an open spam
1050 $wgEmailAuthentication = true;
1053 * Allow users to enable email notification ("enotif") on watchlist changes.
1055 $wgEnotifWatchlist = false;
1058 * Allow users to enable email notification ("enotif") when someone edits their
1061 $wgEnotifUserTalk = false;
1064 * Set the Reply-to address in notifications to the editor's address, if user
1065 * allowed this in the preferences.
1067 $wgEnotifRevealEditorAddress = false;
1070 * Send notification mails on minor edits to watchlist pages. This is enabled
1071 * by default. Does not affect user talk notifications.
1073 $wgEnotifMinorEdits = true;
1076 * Send a generic mail instead of a personalised mail for each user. This
1077 * always uses UTC as the time zone, and doesn't include the username.
1079 * For pages with many users watching, this can significantly reduce mail load.
1080 * Has no effect when using sendmail rather than SMTP.
1082 $wgEnotifImpersonal = false;
1085 * Maximum number of users to mail at once when using impersonal mail. Should
1086 * match the limit on your mail server.
1088 $wgEnotifMaxRecips = 500;
1091 * Send mails via the job queue. This can be useful to reduce the time it
1092 * takes to save a page that a lot of people are watching.
1094 $wgEnotifUseJobQ = false;
1097 * Use real name instead of username in e-mail "from" field.
1099 $wgEnotifUseRealName = false;
1102 * Array of usernames who will be sent a notification email for every change
1103 * which occurs on a wiki.
1105 $wgUsersNotifiedOnAllChanges = array();
1108 /** @} */ # end of email settings
1110 /************************************************************************//**
1111 * @name Database settings
1114 /** Database host name or IP address */
1115 $wgDBserver = 'localhost';
1116 /** Database port number (for PostgreSQL) */
1118 /** Name of the database */
1119 $wgDBname = 'my_wiki';
1120 /** Database username */
1121 $wgDBuser = 'wikiuser';
1122 /** Database user's password */
1124 /** Database type */
1125 $wgDBtype = 'mysql';
1127 /** Separate username for maintenance tasks. Leave as null to use the default. */
1128 $wgDBadminuser = null;
1129 /** Separate password for maintenance tasks. Leave as null to use the default. */
1130 $wgDBadminpassword = null;
1134 * Leave as null to select the default search engine for the
1135 * selected database type (eg SearchMySQL), or set to a class
1136 * name to override to a custom search engine.
1138 $wgSearchType = null;
1140 /** Table name prefix */
1142 /** MySQL table options to use during installation or update */
1143 $wgDBTableOptions = 'ENGINE=InnoDB';
1146 * SQL Mode - default is turning off all modes, including strict, if set.
1147 * null can be used to skip the setting for performance reasons and assume
1148 * DBA has done his best job.
1149 * String override can be used for some additional fun :-)
1153 /** Mediawiki schema */
1154 $wgDBmwschema = 'mediawiki';
1155 /** Tsearch2 schema */
1156 $wgDBts2schema = 'public';
1158 /** To override default SQLite data directory ($docroot/../data) */
1159 $wgSQLiteDataDir = '';
1162 * Make all database connections secretly go to localhost. Fool the load balancer
1163 * thinking there is an arbitrarily large cluster of servers to connect to.
1164 * Useful for debugging.
1166 $wgAllDBsAreLocalhost = false;
1169 * Shared database for multiple wikis. Commonly used for storing a user table
1170 * for single sign-on. The server for this database must be the same as for the
1173 * For backwards compatibility the shared prefix is set to the same as the local
1174 * prefix, and the user table is listed in the default list of shared tables.
1175 * The user_properties table is also added so that users will continue to have their
1176 * preferences shared (preferences were stored in the user table prior to 1.16)
1178 * $wgSharedTables may be customized with a list of tables to share in the shared
1179 * datbase. However it is advised to limit what tables you do share as many of
1180 * MediaWiki's tables may have side effects if you try to share them.
1183 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1188 /** @see $wgSharedDB */
1189 $wgSharedPrefix = false;
1190 /** @see $wgSharedDB */
1191 $wgSharedTables = array( 'user', 'user_properties' );
1194 * Database load balancer
1195 * This is a two-dimensional array, an array of server info structures
1198 * - dbname: Default database name
1200 * - password: DB password
1201 * - type: "mysql" or "postgres"
1202 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1203 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1204 * to several groups, the most specific group defined here is used.
1206 * - flags: bit field
1207 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1208 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1209 * - DBO_TRX -- wrap entire request in a transaction
1210 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1211 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1213 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1214 * - max threads: (optional) Maximum number of running threads
1216 * These and any other user-defined properties will be assigned to the mLBInfo member
1217 * variable of the Database object.
1219 * Leave at false to use the single-server variables above. If you set this
1220 * variable, the single-server variables will generally be ignored (except
1221 * perhaps in some command-line scripts).
1223 * The first server listed in this array (with key 0) will be the master. The
1224 * rest of the servers will be slaves. To prevent writes to your slaves due to
1225 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1226 * slaves in my.cnf. You can set read_only mode at runtime using:
1229 * SET @@read_only=1;
1232 * Since the effect of writing to a slave is so damaging and difficult to clean
1233 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1234 * our masters, and then set read_only=0 on masters at runtime.
1236 $wgDBservers = false;
1239 * Load balancer factory configuration
1240 * To set up a multi-master wiki farm, set the class here to something that
1241 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1242 * The class identified here is responsible for reading $wgDBservers,
1243 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1245 * The LBFactory_Multi class is provided for this purpose, please see
1246 * includes/db/LBFactory_Multi.php for configuration information.
1248 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1250 /** How long to wait for a slave to catch up to the master */
1251 $wgMasterWaitTimeout = 10;
1253 /** File to log database errors to */
1254 $wgDBerrorLog = false;
1256 /** When to give an error message */
1257 $wgDBClusterTimeout = 10;
1260 * Scale load balancer polling time so that under overload conditions, the database server
1261 * receives a SHOW STATUS query at an average interval of this many microseconds
1263 $wgDBAvgStatusPoll = 2000;
1265 /** Set to true if using InnoDB tables */
1266 $wgDBtransactions = false;
1267 /** Set to true for compatibility with extensions that might be checking.
1268 * MySQL 3.23.x is no longer supported. */
1272 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1273 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1275 * WARNING: THIS IS EXPERIMENTAL!
1277 * May break if you're not using the table defs from mysql5/tables.sql.
1278 * May break if you're upgrading an existing wiki if set differently.
1279 * Broken symptoms likely to include incorrect behavior with page titles,
1280 * usernames, comments etc containing non-ASCII characters.
1281 * Might also cause failures on the object cache and other things.
1283 * Even correct usage may cause failures with Unicode supplementary
1284 * characters (those not in the Basic Multilingual Plane) unless MySQL
1285 * has enhanced their Unicode support.
1287 $wgDBmysql5 = false;
1290 * Other wikis on this site, can be administered from a single developer
1292 * Array numeric key => database name
1294 $wgLocalDatabases = array();
1297 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1298 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1299 * show a more obvious warning.
1301 $wgSlaveLagWarning = 10;
1302 /** @see $wgSlaveLagWarning */
1303 $wgSlaveLagCritical = 30;
1306 * Use old names for change_tags indices.
1308 $wgOldChangeTagsIndex = false;
1310 /**@}*/ # End of DB settings }
1313 /************************************************************************//**
1314 * @name Text storage
1319 * We can also compress text stored in the 'text' table. If this is set on, new
1320 * revisions will be compressed on page save if zlib support is available. Any
1321 * compressed revisions will be decompressed on load regardless of this setting
1322 * *but will not be readable at all* if zlib support is not available.
1324 $wgCompressRevisions = false;
1327 * External stores allow including content
1328 * from non database sources following URL links
1330 * Short names of ExternalStore classes may be specified in an array here:
1331 * $wgExternalStores = array("http","file","custom")...
1333 * CAUTION: Access to database might lead to code execution
1335 $wgExternalStores = false;
1338 * An array of external mysql servers, e.g.
1339 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
1340 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
1342 $wgExternalServers = array();
1345 * The place to put new revisions, false to put them in the local text table.
1346 * Part of a URL, e.g. DB://cluster1
1348 * Can be an array instead of a single string, to enable data distribution. Keys
1349 * must be consecutive integers, starting at zero. Example:
1351 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1354 $wgDefaultExternalStore = false;
1357 * Revision text may be cached in $wgMemc to reduce load on external storage
1358 * servers and object extraction overhead for frequently-loaded revisions.
1360 * Set to 0 to disable, or number of seconds before cache expiry.
1362 $wgRevisionCacheExpiry = 0;
1364 /** @} */ # end text storage }
1366 /************************************************************************//**
1367 * @name Performance hacks and limits
1370 /** Disable database-intensive features */
1371 $wgMiserMode = false;
1372 /** Disable all query pages if miser mode is on, not just some */
1373 $wgDisableQueryPages = false;
1374 /** Number of rows to cache in 'querycache' table when miser mode is on */
1375 $wgQueryCacheLimit = 1000;
1376 /** Number of links to a page required before it is deemed "wanted" */
1377 $wgWantedPagesThreshold = 1;
1378 /** Enable slow parser functions */
1379 $wgAllowSlowParserFunctions = false;
1382 * Do DELETE/INSERT for link updates instead of incremental
1384 $wgUseDumbLinkUpdate = false;
1387 * Anti-lock flags - bitfield
1388 * - ALF_PRELOAD_LINKS:
1389 * Preload links during link update for save
1390 * - ALF_PRELOAD_EXISTENCE:
1391 * Preload cur_id during replaceLinkHolders
1392 * - ALF_NO_LINK_LOCK:
1393 * Don't use locking reads when updating the link table. This is
1394 * necessary for wikis with a high edit rate for performance
1395 * reasons, but may cause link table inconsistency
1396 * - ALF_NO_BLOCK_LOCK:
1397 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1400 $wgAntiLockFlags = 0;
1403 * Maximum article size in kilobytes
1405 $wgMaxArticleSize = 2048;
1408 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1409 * raise PHP's memory limit if it's below this amount.
1411 $wgMemoryLimit = "50M";
1413 /** @} */ # end performance hacks }
1415 /************************************************************************//**
1416 * @name Cache settings
1421 * Directory for caching data in the local filesystem. Should not be accessible
1422 * from the web. Set this to false to not use any local caches.
1424 * Note: if multiple wikis share the same localisation cache directory, they
1425 * must all have the same set of extensions. You can set a directory just for
1426 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1428 $wgCacheDirectory = false;
1431 * Main cache type. This should be a cache with fast access, but it may have
1432 * limited space. By default, it is disabled, since the database is not fast
1433 * enough to make it worthwhile.
1437 * - CACHE_ANYTHING: Use anything, as long as it works
1438 * - CACHE_NONE: Do not cache
1439 * - CACHE_DB: Store cache objects in the DB
1440 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCacheServers
1441 * - CACHE_ACCEL: eAccelerator, APC, XCache or WinCache
1442 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1443 * database. This is slow, and is not recommended for
1444 * anything other than debugging.
1446 * @see $wgMessageCacheType, $wgParserCacheType
1448 $wgMainCacheType = CACHE_NONE
;
1451 * The cache type for storing the contents of the MediaWiki namespace. This
1452 * cache is used for a small amount of data which is expensive to regenerate.
1454 * For available types see $wgMainCacheType.
1456 $wgMessageCacheType = CACHE_ANYTHING
;
1459 * The cache type for storing article HTML. This is used to store data which
1460 * is expensive to regenerate, and benefits from having plenty of storage space.
1462 * For available types see $wgMainCacheType.
1464 $wgParserCacheType = CACHE_ANYTHING
;
1467 * The expiry time for the parser cache, in seconds. The default is 86.4k
1468 * seconds, otherwise known as a day.
1470 $wgParserCacheExpireTime = 86400;
1473 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
1475 $wgDBAhandler = 'db3';
1478 * Store sessions in MemCached. This can be useful to improve performance, or to
1479 * avoid the locking behaviour of PHP's default session handler, which tends to
1480 * prevent multiple requests for the same user from acting concurrently.
1482 $wgSessionsInMemcached = false;
1485 * This is used for setting php's session.save_handler. In practice, you will
1486 * almost never need to change this ever. Other options might be 'user' or
1487 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1488 * useful if you're doing cross-application sessions, see bug 11381)
1490 $wgSessionHandler = 'files';
1492 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1493 $wgMemCachedDebug = false;
1495 /** The list of MemCached servers and port numbers */
1496 $wgMemCachedServers = array( '127.0.0.1:11000' );
1499 * Use persistent connections to MemCached, which are shared across multiple
1502 $wgMemCachedPersistent = false;
1505 * Read/write timeout for MemCached server communication, in microseconds.
1507 $wgMemCachedTimeout = 100000;
1510 * Set this to true to make a local copy of the message cache, for use in
1511 * addition to memcached. The files will be put in $wgCacheDirectory.
1513 $wgUseLocalMessageCache = false;
1516 * Defines format of local cache
1517 * true - Serialized object
1518 * false - PHP source file (Warning - security risk)
1520 $wgLocalMessageCacheSerialized = true;
1523 * Instead of caching everything, keep track which messages are requested and
1524 * load only most used messages. This only makes sense if there is lots of
1525 * interface messages customised in the wiki (like hundreds in many languages).
1527 $wgAdaptiveMessageCache = false;
1530 * Localisation cache configuration. Associative array with keys:
1531 * class: The class to use. May be overridden by extensions.
1533 * store: The location to store cache data. May be 'files', 'db' or
1534 * 'detect'. If set to "files", data will be in CDB files. If set
1535 * to "db", data will be stored to the database. If set to
1536 * "detect", files will be used if $wgCacheDirectory is set,
1537 * otherwise the database will be used.
1539 * storeClass: The class name for the underlying storage. If set to a class
1540 * name, it overrides the "store" setting.
1542 * storeDirectory: If the store class puts its data in files, this is the
1543 * directory it will use. If this is false, $wgCacheDirectory
1546 * manualRecache: Set this to true to disable cache updates on web requests.
1547 * Use maintenance/rebuildLocalisationCache.php instead.
1549 $wgLocalisationCacheConf = array(
1550 'class' => 'LocalisationCache',
1551 'store' => 'detect',
1552 'storeClass' => false,
1553 'storeDirectory' => false,
1554 'manualRecache' => false,
1557 /** Allow client-side caching of pages */
1558 $wgCachePages = true;
1561 * Set this to current time to invalidate all prior cached pages. Affects both
1562 * client- and server-side caching.
1563 * You can get the current date on your server by using the command:
1564 * date +%Y%m%d%H%M%S
1566 $wgCacheEpoch = '20030516000000';
1569 * Bump this number when changing the global style sheets and JavaScript.
1570 * It should be appended in the query string of static CSS and JS includes,
1571 * to ensure that client-side caches do not keep obsolete copies of global
1574 $wgStyleVersion = '301';
1577 * This will cache static pages for non-logged-in users to reduce
1578 * database traffic on public sites.
1579 * Must set $wgShowIPinHeader = false
1581 $wgUseFileCache = false;
1584 * Directory where the cached page will be saved.
1585 * Defaults to "$wgCacheDirectory/html".
1587 $wgFileCacheDirectory = false;
1590 * Keep parsed pages in a cache (objectcache table or memcached)
1591 * to speed up output of the same page viewed by another user with the
1594 * This can provide a significant speedup for medium to large pages,
1595 * so you probably want to keep it on. Extensions that conflict with the
1596 * parser cache should disable the cache on a per-page basis instead.
1598 $wgEnableParserCache = true;
1601 * Append a configured value to the parser cache and the sitenotice key so
1602 * that they can be kept separate for some class of activity.
1604 $wgRenderHashAppend = '';
1607 * If on, the sidebar navigation links are cached for users with the
1608 * current language set. This can save a touch of load on a busy site
1609 * by shaving off extra message lookups.
1611 * However it is also fragile: changing the site configuration, or
1612 * having a variable $wgArticlePath, can produce broken links that
1613 * don't update as expected.
1615 $wgEnableSidebarCache = false;
1618 * Expiry time for the sidebar cache, in seconds
1620 $wgSidebarCacheExpiry = 86400;
1623 * When using the file cache, we can store the cached HTML gzipped to save disk
1624 * space. Pages will then also be served compressed to clients that support it.
1625 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1626 * the default LocalSettings.php! If you enable this, remove that setting first.
1628 * Requires zlib support enabled in PHP.
1632 /** Whether MediaWiki should send an ETag header */
1635 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1636 * problems when the user requests two pages within a short period of time. This
1637 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1640 $wgClockSkewFudge = 5;
1643 * Maximum time in seconds to cache resources served by the resource loader
1645 $wgResourceLoaderMaxage = array(
1646 'versioned' => array(
1647 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
1648 'server' => 30 * 24 * 60 * 60, // 30 days
1649 // On the client side (e.g. in the browser cache).
1650 'client' => 30 * 24 * 60 * 60, // 30 days
1652 'unversioned' => array(
1653 'server' => 5 * 60, // 5 minutes
1654 'client' => 5 * 60, // 5 minutes
1659 * Whether to embed private modules inline with HTML output or to bypass caching and check the user parameter against
1660 * $wgUser to prevent unauthorized access to private modules.
1662 $wgResourceLoaderInlinePrivateModules = true;
1665 * The default debug mode (on/off) for of ResourceLoader requests. This will still
1666 * be overridden when the debug URL parameter is used.
1668 $wgResourceLoaderDebug = false;
1671 * Enable embedding of certain resources using Edge Side Includes. This will
1672 * improve performance but only works if there is something in front of the
1673 * web server (e..g a Squid or Varnish server) configured to process the ESI.
1675 $wgResourceLoaderUseESI = false;
1677 /** @} */ # end of cache settings
1679 /************************************************************************//**
1680 * @name HTTP proxy (Squid) settings
1682 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
1683 * although they are referred to as Squid settings for historical reasons.
1685 * Achieving a high hit ratio with an HTTP proxy requires special
1686 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
1693 * Enable/disable Squid.
1694 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
1696 $wgUseSquid = false;
1698 /** If you run Squid3 with ESI support, enable this (default:false): */
1701 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1705 * Internal server name as known to Squid, if different. Example:
1707 * $wgInternalServer = 'http://yourinternal.tld:8000';
1710 $wgInternalServer = $wgServer;
1713 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1714 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1715 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1718 $wgSquidMaxage = 18000;
1721 * Default maximum age for raw CSS/JS accesses
1723 $wgForcedRawSMaxage = 300;
1726 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1728 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1729 * headers sent/modified from these proxies when obtaining the remote IP address
1731 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1733 $wgSquidServers = array();
1736 * As above, except these servers aren't purged on page changes; use to set a
1737 * list of trusted proxies, etc.
1739 $wgSquidServersNoPurge = array();
1741 /** Maximum number of titles to purge in any one client operation */
1742 $wgMaxSquidPurgeTitles = 400;
1745 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
1747 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
1748 * present in the earliest Squid implementations of the protocol.
1750 $wgHTCPMulticastAddress = false;
1753 * HTCP multicast port.
1754 * @see $wgHTCPMulticastAddress
1759 * HTCP multicast TTL.
1760 * @see $wgHTCPMulticastAddress
1762 $wgHTCPMulticastTTL = 1;
1764 /** Should forwarded Private IPs be accepted? */
1765 $wgUsePrivateIPs = false;
1767 /** @} */ # end of HTTP proxy settings
1769 /************************************************************************//**
1770 * @name Language, regional and character encoding settings
1774 /** Site language code, should be one of ./languages/Language(.*).php */
1775 $wgLanguageCode = 'en';
1778 * Some languages need different word forms, usually for different cases.
1779 * Used in Language::convertGrammar(). Example:
1782 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
1785 $wgGrammarForms = array();
1787 /** Treat language links as magic connectors, not inline links */
1788 $wgInterwikiMagic = true;
1790 /** Hide interlanguage links from the sidebar */
1791 $wgHideInterlanguageLinks = false;
1793 /** List of language names or overrides for default names in Names.php */
1794 $wgExtraLanguageNames = array();
1797 * List of language codes that don't correspond to an actual language.
1798 * These codes are leftoffs from renames, or other legacy things.
1799 * Also, qqq is a dummy "language" for documenting messages.
1801 $wgDummyLanguageCodes = array( 'qqq', 'als', 'be-x-old', 'dk', 'fiu-vro', 'iu', 'nb', 'simple', 'tp' );
1803 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1804 $wgInputEncoding = 'UTF-8';
1805 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1806 $wgOutputEncoding = 'UTF-8';
1809 * Character set for use in the article edit box. Language-specific encodings
1812 * This historic feature is one of the first that was added by former MediaWiki
1813 * team leader Brion Vibber, and is used to support the Esperanto x-system.
1815 $wgEditEncoding = '';
1818 * Set this to true to replace Arabic presentation forms with their standard
1819 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
1822 * Note that pages with titles containing presentation forms will become
1823 * inaccessible, run maintenance/cleanupTitles.php to fix this.
1825 $wgFixArabicUnicode = true;
1828 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
1829 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
1830 * set to "ml". Note that some clients (even new clients as of 2010) do not
1831 * support these characters.
1833 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
1834 * fix any ZWJ sequences in existing page titles.
1836 $wgFixMalayalamUnicode = true;
1839 * Set this to always convert certain Unicode sequences to modern ones
1840 * regardless of the content language. This has a small performance
1843 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
1848 $wgAllUnicodeFixes = false;
1851 * Set this to eg 'ISO-8859-1' to perform character set conversion when
1852 * loading old revisions not marked with "utf-8" flag. Use this when
1853 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
1854 * burdensome mass conversion of old text data.
1856 * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
1857 * user names, etc still must be converted en masse in the database before
1858 * continuing as a UTF-8 wiki.
1860 $wgLegacyEncoding = false;
1863 * Browser Blacklist for unicode non compliant browsers. Contains a list of
1864 * regexps : "/regexp/" matching problematic browsers. These browsers will
1865 * be served encoded unicode in the edit box instead of real unicode.
1867 $wgBrowserBlackList = array(
1869 * Netscape 2-4 detection
1870 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
1871 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
1872 * with a negative assertion. The [UIN] identifier specifies the level of security
1873 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
1874 * The language string is unreliable, it is missing on NS4 Mac.
1876 * Reference: http://www.psychedelix.com/agents/index.shtml
1878 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1879 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1880 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1883 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
1886 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
1887 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
1888 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
1891 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
1892 * @link http://en.wikipedia.org/wiki/Template%3AOS9
1894 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1897 * Google wireless transcoder, seems to eat a lot of chars alive
1898 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
1900 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
1904 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
1905 * create stub reference rows in the text table instead of copying
1906 * the full text of all current entries from 'cur' to 'text'.
1908 * This will speed up the conversion step for large sites, but
1909 * requires that the cur table be kept around for those revisions
1910 * to remain viewable.
1912 * maintenance/migrateCurStubs.php can be used to complete the
1913 * migration in the background once the wiki is back online.
1915 * This option affects the updaters *only*. Any present cur stub
1916 * revisions will be readable at runtime regardless of this setting.
1918 $wgLegacySchemaConversion = false;
1921 * Enable to allow rewriting dates in page text.
1922 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
1924 $wgUseDynamicDates = false;
1926 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
1927 * the interface is set to English.
1929 $wgAmericanDates = false;
1931 * For Hindi and Arabic use local numerals instead of Western style (0-9)
1932 * numerals in interface.
1934 $wgTranslateNumerals = true;
1937 * Translation using MediaWiki: namespace.
1938 * Interface messages will be loaded from the database.
1940 $wgUseDatabaseMessages = true;
1943 * Expiry time for the message cache key
1945 $wgMsgCacheExpiry = 86400;
1948 * Maximum entry size in the message cache, in bytes
1950 $wgMaxMsgCacheEntrySize = 10000;
1952 /** Whether to enable language variant conversion. */
1953 $wgDisableLangConversion = false;
1955 /** Whether to enable language variant conversion for links. */
1956 $wgDisableTitleConversion = false;
1958 /** Default variant code, if false, the default will be the language code */
1959 $wgDefaultLanguageVariant = false;
1962 * Disabled variants array of language variant conversion. Example:
1964 * $wgDisabledVariants[] = 'zh-mo';
1965 * $wgDisabledVariants[] = 'zh-my';
1971 * $wgDisabledVariants = array('zh-mo', 'zh-my');
1974 $wgDisabledVariants = array();
1977 * Like $wgArticlePath, but on multi-variant wikis, this provides a
1978 * path format that describes which parts of the URL contain the
1979 * language variant. For Example:
1981 * $wgLanguageCode = 'sr';
1982 * $wgVariantArticlePath = '/$2/$1';
1983 * $wgArticlePath = '/wiki/$1';
1985 * A link to /wiki/ would be redirected to /sr/Главна_страна
1987 * It is important that $wgArticlePath not overlap with possible values
1988 * of $wgVariantArticlePath.
1990 $wgVariantArticlePath = false;
1993 * Show a bar of language selection links in the user login and user
1994 * registration forms; edit the "loginlanguagelinks" message to
1997 $wgLoginLanguageSelector = false;
2000 * When translating messages with wfMsg(), it is not always clear what should
2001 * be considered UI messages and what should be content messages.
2003 * For example, for the English Wikipedia, there should be only one 'mainpage',
2004 * so when getting the link for 'mainpage', we should treat it as site content
2005 * and call wfMsgForContent(), but for rendering the text of the link, we call
2006 * wfMsg(). The code behaves this way by default. However, sites like the
2007 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2008 * different languages. This array provides a way to override the default
2009 * behavior. For example, to allow language-specific main page and community
2012 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2014 $wgForceUIMsgAsContentMsg = array();
2017 * Fake out the timezone that the server thinks it's in. This will be used for
2018 * date display and not for what's stored in the DB. Leave to null to retain
2019 * your server's OS-based timezone value.
2021 * This variable is currently used only for signature formatting and for local
2022 * time/date parser variables ({{LOCALTIME}} etc.)
2024 * Timezones can be translated by editing MediaWiki messages of type
2025 * timezone-nameinlowercase like timezone-utc.
2029 * $wgLocaltimezone = 'GMT';
2030 * $wgLocaltimezone = 'PST8PDT';
2031 * $wgLocaltimezone = 'Europe/Sweden';
2032 * $wgLocaltimezone = 'CET';
2035 $wgLocaltimezone = null;
2038 * Set an offset from UTC in minutes to use for the default timezone setting
2039 * for anonymous users and new user accounts.
2041 * This setting is used for most date/time displays in the software, and is
2042 * overrideable in user preferences. It is *not* used for signature timestamps.
2044 * You can set it to match the configured server timezone like this:
2045 * $wgLocalTZoffset = date("Z") / 60;
2047 * If your server is not configured for the timezone you want, you can set
2048 * this in conjunction with the signature timezone and override the PHP default
2050 * $wgLocaltimezone="Europe/Berlin";
2051 * date_default_timezone_set( $wgLocaltimezone );
2052 * $wgLocalTZoffset = date("Z") / 60;
2054 * Leave at NULL to show times in universal time (UTC/GMT).
2056 $wgLocalTZoffset = null;
2058 /** @} */ # End of language/charset settings
2060 /*************************************************************************//**
2061 * @name Output format and skin settings
2065 /** The default Content-Type header. */
2066 $wgMimeType = 'text/html';
2068 /** The content type used in script tags. */
2069 $wgJsMimeType = 'text/javascript';
2071 /** The HTML document type. */
2072 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2074 /** The URL of the document type declaration. */
2075 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2077 /** The default xmlns attribute. */
2078 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2081 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2082 * instead, and disable HTML5 features. This may eventually be removed and set
2088 * Defines the value of the version attribute in the <html> tag, if any.
2089 * Will be initialized later if not set explicitly.
2091 $wgHtml5Version = null;
2094 * Enabled RDFa attributes for use in wikitext.
2095 * NOTE: Interaction with HTML5 is somewhat underspecified.
2097 $wgAllowRdfaAttributes = false;
2100 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2102 $wgAllowMicrodataAttributes = false;
2105 * Should we try to make our HTML output well-formed XML? If set to false,
2106 * output will be a few bytes shorter, and the HTML will arguably be more
2107 * readable. If set to true, life will be much easier for the authors of
2108 * screen-scraping bots, and the HTML will arguably be more readable.
2110 * Setting this to false may omit quotation marks on some attributes, omit
2111 * slashes from some self-closing tags, omit some ending tags, etc., where
2112 * permitted by HTML5. Setting it to true will not guarantee that all pages
2113 * will be well-formed, although non-well-formed pages should be rare and it's
2114 * a bug if you find one. Conversely, setting it to false doesn't mean that
2115 * all XML-y constructs will be omitted, just that they might be.
2117 * Because of compatibility with screen-scraping bots, and because it's
2118 * controversial, this is currently left to true by default.
2120 $wgWellFormedXml = true;
2123 * Permit other namespaces in addition to the w3.org default.
2124 * Use the prefix for the key and the namespace for the value. For
2126 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2127 * Normally we wouldn't have to define this in the root <html>
2128 * element, but IE needs it there in some circumstances.
2130 $wgXhtmlNamespaces = array();
2133 * Show IP address, for non-logged in users. It's necessary to switch this off
2134 * for some forms of caching.
2136 $wgShowIPinHeader = true;
2139 * Site notice shown at the top of each page
2141 * MediaWiki:Sitenotice page, which will override this. You can also
2142 * provide a separate message for logged-out users using the
2143 * MediaWiki:Anonnotice page.
2148 * A subtitle to add to the tagline, for skins that have it/
2150 $wgExtraSubtitle = '';
2153 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2155 $wgSiteSupportPage = '';
2158 * Validate the overall output using tidy and refuse
2159 * to display the page if it's not valid.
2161 $wgValidateAllHtml = false;
2164 * Default skin, for new users and anonymous visitors. Registered users may
2165 * change this to any one of the other available skins in their preferences.
2166 * This has to be completely lowercase; see the "skins" directory for the list
2167 * of available skins.
2169 $wgDefaultSkin = 'vector';
2172 * Should we allow the user's to select their own skin that will override the default?
2173 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2175 $wgAllowUserSkin = true;
2178 * Specify the name of a skin that should not be presented in the list of
2179 * available skins. Use for blacklisting a skin which you do not want to
2180 * remove from the .../skins/ directory
2183 /** Array for more like $wgSkipSkin. */
2184 $wgSkipSkins = array();
2187 * Optionally, we can specify a stylesheet to use for media="handheld".
2188 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2189 * If left empty, compliant handheld browsers won't pick up the skin
2190 * stylesheet, which is specified for 'screen' media.
2192 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2193 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2195 * Will also be switched in when 'handheld=yes' is added to the URL, like
2196 * the 'printable=yes' mode for print media.
2198 $wgHandheldStyle = false;
2201 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2202 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2203 * which doesn't recognize 'handheld' but does support media queries on its
2206 * Consider only using this if you have a *really good* handheld stylesheet,
2207 * as iPhone users won't have any way to disable it and use the "grown-up"
2210 $wgHandheldForIPhone = false;
2213 * Allow user Javascript page?
2214 * This enables a lot of neat customizations, but may
2215 * increase security risk to users and server load.
2217 $wgAllowUserJs = false;
2220 * Allow user Cascading Style Sheets (CSS)?
2221 * This enables a lot of neat customizations, but may
2222 * increase security risk to users and server load.
2224 $wgAllowUserCss = false;
2227 * Allow user-preferences implemented in CSS?
2228 * This allows users to customise the site appearance to a greater
2229 * degree; disabling it will improve page load times.
2231 $wgAllowUserCssPrefs = true;
2233 /** Use the site's Javascript page? */
2234 $wgUseSiteJs = true;
2236 /** Use the site's Cascading Style Sheets (CSS)? */
2237 $wgUseSiteCss = true;
2240 * Set to false to disable application of access keys and tooltips,
2241 * eg to avoid keyboard conflicts with system keys or as a low-level
2244 $wgEnableTooltipsAndAccesskeys = true;
2247 * Break out of framesets. This can be used to prevent external sites from
2248 * framing your site with ads.
2250 $wgBreakFrames = false;
2253 * Disable output compression (enabled by default if zlib is available)
2255 $wgDisableOutputCompression = false;
2258 * Should we allow a broader set of characters in id attributes, per HTML5? If
2259 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2260 * functionality is ready, it will be on by default with no option.
2262 * Currently this appears to work fine in Chrome 4 and 5, Firefox 3.5 and 3.6, IE6
2263 * and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
2264 * to work as anchors. So not quite ready for general use yet.
2266 $wgExperimentalHtmlIds = true;
2269 * Search form behavior for Vector skin only
2270 * true = use an icon search button
2271 * false = use Go & Search buttons
2273 $wgVectorUseSimpleSearch = false;
2276 * Watch and unwatch as an icon rather than a link for Vector skin only
2277 * true = use an icon watch/unwatch button
2278 * false = use watch/unwatch text link
2280 $wgVectorUseIconWatch = false;
2283 * Show the name of the current variant as a label in the variants drop-down menu
2285 $wgVectorShowVariantName = false;
2288 * Display user edit counts in various prominent places.
2290 $wgEdititis = false;
2293 * Experimental better directionality support.
2295 $wgBetterDirectionality = false;
2298 /** @} */ # End of output format settings }
2300 /*************************************************************************//**
2301 * @name Page title and interwiki link settings
2306 * Name of the project namespace. If left set to false, $wgSitename will be
2309 $wgMetaNamespace = false;
2312 * Name of the project talk namespace.
2314 * Normally you can ignore this and it will be something like
2315 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
2316 * manually for grammatical reasons.
2318 $wgMetaNamespaceTalk = false;
2321 * Additional namespaces. If the namespaces defined in Language.php and
2322 * Namespace.php are insufficient, you can create new ones here, for example,
2323 * to import Help files in other languages. You can also override the namespace
2324 * names of existing namespaces. Extensions developers should use
2325 * $wgCanonicalNamespaceNames.
2327 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2328 * no longer be accessible. If you rename it, then you can access them through
2329 * the new namespace name.
2331 * Custom namespaces should start at 100 to avoid conflicting with standard
2332 * namespaces, and should always follow the even/odd main/talk pattern.
2334 #$wgExtraNamespaces =
2335 # array(100 => "Hilfe",
2336 # 101 => "Hilfe_Diskussion",
2338 # 103 => "Discussion_Aide"
2340 $wgExtraNamespaces = array();
2344 * These are alternate names for the primary localised namespace names, which
2345 * are defined by $wgExtraNamespaces and the language file. If a page is
2346 * requested with such a prefix, the request will be redirected to the primary
2349 * Set this to a map from namespace names to IDs.
2351 * $wgNamespaceAliases = array(
2352 * 'Wikipedian' => NS_USER,
2356 $wgNamespaceAliases = array();
2359 * Allowed title characters -- regex character class
2360 * Don't change this unless you know what you're doing
2362 * Problematic punctuation:
2363 * - []{}|# Are needed for link syntax, never enable these
2364 * - <> Causes problems with HTML escaping, don't use
2365 * - % Enabled by default, minor problems with path to query rewrite rules, see below
2366 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
2367 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
2369 * All three of these punctuation problems can be avoided by using an alias, instead of a
2370 * rewrite rule of either variety.
2372 * The problem with % is that when using a path to query rewrite rule, URLs are
2373 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
2374 * %253F, for example, becomes "?". Our code does not double-escape to compensate
2375 * for this, indeed double escaping would break if the double-escaped title was
2376 * passed in the query string rather than the path. This is a minor security issue
2377 * because articles can be created such that they are hard to view or edit.
2379 * In some rare cases you may wish to remove + for compatibility with old links.
2381 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
2382 * this breaks interlanguage links
2384 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
2386 $wgLocalInterwiki = 'w';
2387 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
2389 /** Interwiki caching settings.
2390 $wgInterwikiCache specifies path to constant database file
2391 This cdb database is generated by dumpInterwiki from maintenance
2392 and has such key formats:
2393 dbname:key - a simple key (e.g. enwiki:meta)
2394 _sitename:key - site-scope key (e.g. wiktionary:meta)
2395 __global:key - global-scope key (e.g. __global:meta)
2396 __sites:dbname - site mapping (e.g. __sites:enwiki)
2397 Sites mapping just specifies site name, other keys provide
2398 "local url" data layout.
2399 $wgInterwikiScopes specify number of domains to check for messages:
2400 1 - Just wiki(db)-level
2401 2 - wiki and global levels
2403 $wgInterwikiFallbackSite - if unable to resolve from cache
2405 $wgInterwikiCache = false;
2406 $wgInterwikiScopes = 3;
2407 $wgInterwikiFallbackSite = 'wiki';
2410 * If local interwikis are set up which allow redirects,
2411 * set this regexp to restrict URLs which will be displayed
2412 * as 'redirected from' links.
2414 * It might look something like this:
2415 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
2417 * Leave at false to avoid displaying any incoming redirect markers.
2418 * This does not affect intra-wiki redirects, which don't change
2421 $wgRedirectSources = false;
2424 * Set this to false to avoid forcing the first letter of links to capitals.
2425 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2426 * appearing with a capital at the beginning of a sentence will *not* go to the
2427 * same place as links in the middle of a sentence using a lowercase initial.
2429 $wgCapitalLinks = true;
2432 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2433 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2434 * true by default (and setting them has no effect), due to various things that
2435 * require them to be so. Also, since Talk namespaces need to directly mirror their
2436 * associated content namespaces, the values for those are ignored in favor of the
2437 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2439 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2441 $wgCapitalLinkOverrides = array();
2443 /** Which namespaces should support subpages?
2444 * See Language.php for a list of namespaces.
2446 $wgNamespacesWithSubpages = array(
2449 NS_USER_TALK
=> true,
2450 NS_PROJECT_TALK
=> true,
2451 NS_FILE_TALK
=> true,
2452 NS_MEDIAWIKI
=> true,
2453 NS_MEDIAWIKI_TALK
=> true,
2454 NS_TEMPLATE_TALK
=> true,
2455 NS_HELP_TALK
=> true,
2456 NS_CATEGORY_TALK
=> true
2460 * Array of namespaces which can be deemed to contain valid "content", as far
2461 * as the site statistics are concerned. Useful if additional namespaces also
2462 * contain "content" which should be considered when generating a count of the
2463 * number of articles in the wiki.
2465 $wgContentNamespaces = array( NS_MAIN
);
2468 * Max number of redirects to follow when resolving redirects.
2469 * 1 means only the first redirect is followed (default behavior).
2470 * 0 or less means no redirects are followed.
2472 $wgMaxRedirects = 1;
2475 * Array of invalid page redirect targets.
2476 * Attempting to create a redirect to any of the pages in this array
2477 * will make the redirect fail.
2478 * Userlogout is hard-coded, so it does not need to be listed here.
2479 * (bug 10569) Disallow Mypage and Mytalk as well.
2481 * As of now, this only checks special pages. Redirects to pages in
2482 * other namespaces cannot be invalidated by this variable.
2484 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
2486 /** @} */ # End of title and interwiki settings }
2488 /************************************************************************//**
2489 * @name Parser settings
2490 * These settings configure the transformation from wikitext to HTML.
2495 * Parser configuration. Associative array with the following members:
2497 * class The class name
2499 * preprocessorClass The preprocessor class. Two classes are currently available:
2500 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
2501 * storage, and Preprocessor_DOM, which uses the DOM module for
2502 * temporary storage. Preprocessor_DOM generally uses less memory;
2503 * the speed of the two is roughly the same.
2505 * If this parameter is not given, it uses Preprocessor_DOM if the
2506 * DOM module is available, otherwise it uses Preprocessor_Hash.
2508 * The entire associative array will be passed through to the constructor as
2509 * the first parameter. Note that only Setup.php can use this variable --
2510 * the configuration will change at runtime via $wgParser member functions, so
2511 * the contents of this variable will be out-of-date. The variable can only be
2512 * changed during LocalSettings.php, in particular, it can't be changed during
2513 * an extension setup function.
2515 $wgParserConf = array(
2516 'class' => 'Parser',
2517 #'preprocessorClass' => 'Preprocessor_Hash',
2520 /** Maximum indent level of toc. */
2521 $wgMaxTocLevel = 999;
2524 * A complexity limit on template expansion
2526 $wgMaxPPNodeCount = 1000000;
2529 * Maximum recursion depth for templates within templates.
2530 * The current parser adds two levels to the PHP call stack for each template,
2531 * and xdebug limits the call stack to 100 by default. So this should hopefully
2532 * stop the parser before it hits the xdebug limit.
2534 $wgMaxTemplateDepth = 40;
2536 /** @see $wgMaxTemplateDepth */
2537 $wgMaxPPExpandDepth = 40;
2539 /** The external URL protocols */
2540 $wgUrlProtocols = array(
2546 'telnet://', // Well if we're going to support the above.. -ævar
2547 'nntp://', // @bug 3808 RFC 1738
2557 * If true, removes (substitutes) templates in "~~~~" signatures.
2559 $wgCleanSignatures = true;
2561 /** Whether to allow inline image pointing to other websites */
2562 $wgAllowExternalImages = false;
2565 * If the above is false, you can specify an exception here. Image URLs
2566 * that start with this string are then rendered, while all others are not.
2567 * You can use this to set up a trusted, simple repository of images.
2568 * You may also specify an array of strings to allow multiple sites
2572 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
2573 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
2576 $wgAllowExternalImagesFrom = '';
2578 /** If $wgAllowExternalImages is false, you can allow an on-wiki
2579 * whitelist of regular expression fragments to match the image URL
2580 * against. If the image matches one of the regular expression fragments,
2581 * The image will be displayed.
2583 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
2584 * Or false to disable it
2586 $wgEnableImageWhitelist = true;
2589 * A different approach to the above: simply allow the <img> tag to be used.
2590 * This allows you to specify alt text and other attributes, copy-paste HTML to
2591 * your wiki more easily, etc. However, allowing external images in any manner
2592 * will allow anyone with editing rights to snoop on your visitors' IP
2593 * addresses and so forth, if they wanted to, by inserting links to images on
2594 * sites they control.
2596 $wgAllowImageTag = false;
2599 * $wgUseTidy: use tidy to make sure HTML output is sane.
2600 * Tidy is a free tool that fixes broken HTML.
2601 * See http://www.w3.org/People/Raggett/tidy/
2603 * - $wgTidyBin should be set to the path of the binary and
2604 * - $wgTidyConf to the path of the configuration file.
2605 * - $wgTidyOpts can include any number of parameters.
2606 * - $wgTidyInternal controls the use of the PECL extension to use an in-
2607 * process tidy library instead of spawning a separate program.
2608 * Normally you shouldn't need to override the setting except for
2609 * debugging. To install, use 'pear install tidy' and add a line
2610 * 'extension=tidy.so' to php.ini.
2613 /** @see $wgUseTidy */
2614 $wgAlwaysUseTidy = false;
2615 /** @see $wgUseTidy */
2616 $wgTidyBin = 'tidy';
2617 /** @see $wgUseTidy */
2618 $wgTidyConf = $IP.'/includes/tidy.conf';
2619 /** @see $wgUseTidy */
2621 /** @see $wgUseTidy */
2622 $wgTidyInternal = extension_loaded( 'tidy' );
2625 * Put tidy warnings in HTML comments
2626 * Only works for internal tidy.
2628 $wgDebugTidy = false;
2630 /** Allow raw, unchecked HTML in <html>...</html> sections.
2631 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2632 * TO RESTRICT EDITING to only those that you trust
2637 * Set a default target for external links, e.g. _blank to pop up a new window
2639 $wgExternalLinkTarget = false;
2642 * If true, external URL links in wiki text will be given the
2643 * rel="nofollow" attribute as a hint to search engines that
2644 * they should not be followed for ranking purposes as they
2645 * are user-supplied and thus subject to spamming.
2647 $wgNoFollowLinks = true;
2650 * Namespaces in which $wgNoFollowLinks doesn't apply.
2651 * See Language.php for a list of namespaces.
2653 $wgNoFollowNsExceptions = array();
2656 * If this is set to an array of domains, external links to these domain names
2657 * (or any subdomains) will not be set to rel="nofollow" regardless of the
2658 * value of $wgNoFollowLinks. For instance:
2660 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
2662 * This would add rel="nofollow" to links to de.wikipedia.org, but not
2663 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
2666 $wgNoFollowDomainExceptions = array();
2669 * Allow DISPLAYTITLE to change title display
2671 $wgAllowDisplayTitle = true;
2674 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
2677 $wgRestrictDisplayTitle = true;
2680 * Maximum number of calls per parse to expensive parser functions such as
2683 $wgExpensiveParserFunctionLimit = 100;
2686 * Preprocessor caching threshold
2688 $wgPreprocessorCacheThreshold = 1000;
2691 * Enable interwiki transcluding. Only when iw_trans=1.
2693 $wgEnableScaryTranscluding = false;
2696 * Expiry time for interwiki transclusion
2698 $wgTranscludeCacheExpiry = 3600;
2700 /** @} */ # end of parser settings }
2702 /************************************************************************//**
2708 * Under which condition should a page in the main namespace be counted
2709 * as a valid article? If $wgUseCommaCount is set to true, it will be
2710 * counted if it contains at least one comma. If it is set to false
2711 * (default), it will only be counted if it contains at least one [[wiki
2712 * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
2714 * Retroactively changing this variable will not affect
2715 * the existing count (cf. maintenance/recount.sql).
2717 $wgUseCommaCount = false;
2720 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
2721 * values are easier on the database. A value of 1 causes the counters to be
2722 * updated on every hit, any higher value n cause them to update *on average*
2723 * every n hits. Should be set to either 1 or something largish, eg 1000, for
2724 * maximum efficiency.
2726 $wgHitcounterUpdateFreq = 1;
2729 * How many days user must be idle before he is considered inactive. Will affect
2730 * the number shown on Special:Statistics and Special:ActiveUsers special page.
2731 * You might want to leave this as the default value, to provide comparable
2732 * numbers between different wikis.
2734 $wgActiveUserDays = 30;
2736 /** @} */ # End of statistics }
2738 /************************************************************************//**
2739 * @name User accounts, authentication
2743 /** For compatibility with old installations set to false */
2744 $wgPasswordSalt = true;
2747 * Specifies the minimal length of a user password. If set to 0, empty pass-
2748 * words are allowed.
2750 $wgMinimalPasswordLength = 1;
2753 * Enabes or disables JavaScript-based suggestions of password strength
2755 $wgLivePasswordStrengthChecks = false;
2758 * Maximum number of Unicode characters in signature
2760 $wgMaxSigChars = 255;
2763 * Maximum number of bytes in username. You want to run the maintenance
2764 * script ./maintenance/checkUsernames.php once you have changed this value.
2766 $wgMaxNameChars = 255;
2769 * Array of usernames which may not be registered or logged in from
2770 * Maintenance scripts can still use these
2772 $wgReservedUsernames = array(
2773 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
2774 'Conversion script', // Used for the old Wikipedia software upgrade
2775 'Maintenance script', // Maintenance scripts which perform editing, image import script
2776 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
2777 'msg:double-redirect-fixer', // Automatic double redirect fix
2778 'msg:usermessage-editor', // Default user for leaving user messages
2779 'msg:proxyblocker', // For Special:Blockme
2783 * Settings added to this array will override the default globals for the user
2784 * preferences used by anonymous visitors and newly created accounts.
2785 * For instance, to disable section editing links:
2786 * $wgDefaultUserOptions ['editsection'] = 0;
2789 $wgDefaultUserOptions = array(
2790 'ccmeonemails' => 0,
2792 'contextchars' => 50,
2793 'contextlines' => 5,
2794 'date' => 'default',
2797 'disablesuggest' => 0,
2798 'editfont' => 'default',
2799 'editondblclick' => 0,
2801 'editsectiononrightclick' => 0,
2802 'enotifminoredits' => 0,
2803 'enotifrevealaddr' => 0,
2804 'enotifusertalkpages' => 1,
2805 'enotifwatchlistpages' => 0,
2806 'extendwatchlist' => 0,
2807 'externaldiff' => 0,
2808 'externaleditor' => 0,
2810 'forceeditsummary' => 0,
2811 'gender' => 'unknown',
2813 'hidepatrolled' => 0,
2814 'highlightbroken' => 1,
2818 'newpageshidepatrolled' => 0,
2820 'noconvertlink' => 0,
2821 'norollbackdiff' => 0,
2822 'numberheadings' => 0,
2823 'previewonfirst' => 0,
2824 'previewontop' => 1,
2828 'rememberpassword' => 0,
2830 'searchlimit' => 20,
2831 'showhiddencats' => 0,
2832 'showjumplinks' => 1,
2833 'shownumberswatching' => 1,
2837 'stubthreshold' => 0,
2840 'uselivepreview' => 0,
2842 'watchcreations' => 0,
2843 'watchdefault' => 0,
2844 'watchdeletion' => 0,
2845 'watchlistdays' => 3.0,
2846 'watchlisthideanons' => 0,
2847 'watchlisthidebots' => 0,
2848 'watchlisthideliu' => 0,
2849 'watchlisthideminor' => 0,
2850 'watchlisthideown' => 0,
2851 'watchlisthidepatrolled' => 0,
2857 * Whether or not to allow and use real name fields.
2858 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2861 $wgAllowRealName = true;
2863 /** An array of preferences to not show for the user */
2864 $wgHiddenPrefs = array();
2867 * Characters to prevent during new account creations.
2868 * This is used in a regular expression character class during
2869 * registration (regex metacharacters like / are escaped).
2871 $wgInvalidUsernameCharacters = '@';
2874 * Character used as a delimiter when testing for interwiki userrights
2875 * (In Special:UserRights, it is possible to modify users on different
2876 * databases if the delimiter is used, e.g. Someuser@enwiki).
2878 * It is recommended that you have this delimiter in
2879 * $wgInvalidUsernameCharacters above, or you will not be able to
2880 * modify the user rights of those users via Special:UserRights
2882 $wgUserrightsInterwikiDelimiter = '@';
2885 * Use some particular type of external authentication. The specific
2886 * authentication module you use will normally require some extra settings to
2889 * null indicates no external authentication is to be used. Otherwise,
2890 * $wgExternalAuthType must be the name of a non-abstract class that extends
2893 * Core authentication modules can be found in includes/extauth/.
2895 $wgExternalAuthType = null;
2898 * Configuration for the external authentication. This may include arbitrary
2899 * keys that depend on the authentication mechanism. For instance,
2900 * authentication against another web app might require that the database login
2901 * info be provided. Check the file where your auth mechanism is defined for
2902 * info on what to put here.
2904 $wgExternalAuthConf = array();
2907 * When should we automatically create local accounts when external accounts
2908 * already exist, if using ExternalAuth? Can have three values: 'never',
2909 * 'login', 'view'. 'view' requires the external database to support cookies,
2910 * and implies 'login'.
2912 * TODO: Implement 'view' (currently behaves like 'login').
2914 $wgAutocreatePolicy = 'login';
2917 * Policies for how each preference is allowed to be changed, in the presence
2918 * of external authentication. The keys are preference keys, e.g., 'password'
2919 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
2922 * - local: Allow changes to this pref through the wiki interface but only
2923 * apply them locally (default).
2924 * - semiglobal: Allow changes through the wiki interface and try to apply them
2925 * to the foreign database, but continue on anyway if that fails.
2926 * - global: Allow changes through the wiki interface, but only let them go
2927 * through if they successfully update the foreign database.
2928 * - message: Allow no local changes for linked accounts; replace the change
2929 * form with a message provided by the auth plugin, telling the user how to
2930 * change the setting externally (maybe providing a link, etc.). If the auth
2931 * plugin provides no message for this preference, hide it entirely.
2933 * Accounts that are not linked to an external account are never affected by
2934 * this setting. You may want to look at $wgHiddenPrefs instead.
2935 * $wgHiddenPrefs supersedes this option.
2937 * TODO: Implement message, global.
2939 $wgAllowPrefChange = array();
2941 /** @} */ # end user accounts }
2943 /************************************************************************//**
2944 * @name User rights, access control and monitoring
2948 /** Allow sysops to ban logged-in users */
2949 $wgSysopUserBans = true;
2951 /** Allow sysops to ban IP ranges */
2952 $wgSysopRangeBans = true;
2955 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
2957 $wgAutoblockExpiry = 86400;
2960 * Set this to true to allow blocked users to edit their own user talk page.
2962 $wgBlockAllowsUTEdit = false;
2964 /** Allow sysops to ban users from accessing Emailuser */
2965 $wgSysopEmailBans = true;
2968 * Limits on the possible sizes of range blocks.
2970 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
2971 * /1 is a small range and a /31 is a large range. Setting this to half the
2972 * number of bits avoids such errors.
2974 $wgBlockCIDRLimit = array(
2975 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
2976 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
2980 * If true, blocked users will not be allowed to login. When using this with
2981 * a public wiki, the effect of logging out blocked users may actually be
2982 * avers: unless the user's address is also blocked (e.g. auto-block),
2983 * logging the user out will again allow reading and editing, just as for
2984 * anonymous visitors.
2986 $wgBlockDisablesLogin = false;
2989 * Pages anonymous user may see as an array, e.g.
2992 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
2995 * Special:Userlogin and Special:Resetpass are always whitelisted.
2997 * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
2998 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3000 * Also note that this will only protect _pages in the wiki_. Uploaded files
3001 * will remain readable. You can use img_auth.php to protect uploaded files,
3002 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3004 $wgWhitelistRead = false;
3007 * Should editors be required to have a validated e-mail
3008 * address before being allowed to edit?
3010 $wgEmailConfirmToEdit = false;
3013 * Permission keys given to users in each group.
3014 * All users are implicitly in the '*' group including anonymous visitors;
3015 * logged-in users are all implicitly in the 'user' group. These will be
3016 * combined with the permissions of all groups that a given user is listed
3017 * in in the user_groups table.
3019 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3020 * doing! This will wipe all permissions, and may mean that your users are
3021 * unable to perform certain essential tasks or access new functionality
3022 * when new permissions are introduced and default grants established.
3024 * Functionality to make pages inaccessible has not been extensively tested
3025 * for security. Use at your own risk!
3027 * This replaces wgWhitelistAccount and wgWhitelistEdit
3029 $wgGroupPermissions = array();
3031 /** @cond file_level_code */
3032 // Implicit group for all visitors
3033 $wgGroupPermissions['*']['createaccount'] = true;
3034 $wgGroupPermissions['*']['read'] = true;
3035 $wgGroupPermissions['*']['edit'] = true;
3036 $wgGroupPermissions['*']['createpage'] = true;
3037 $wgGroupPermissions['*']['createtalk'] = true;
3038 $wgGroupPermissions['*']['writeapi'] = true;
3039 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3041 // Implicit group for all logged-in accounts
3042 $wgGroupPermissions['user']['move'] = true;
3043 $wgGroupPermissions['user']['move-subpages'] = true;
3044 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3045 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
3046 $wgGroupPermissions['user']['read'] = true;
3047 $wgGroupPermissions['user']['edit'] = true;
3048 $wgGroupPermissions['user']['createpage'] = true;
3049 $wgGroupPermissions['user']['createtalk'] = true;
3050 $wgGroupPermissions['user']['writeapi'] = true;
3051 $wgGroupPermissions['user']['upload'] = true;
3052 $wgGroupPermissions['user']['reupload'] = true;
3053 $wgGroupPermissions['user']['reupload-shared'] = true;
3054 $wgGroupPermissions['user']['minoredit'] = true;
3055 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3056 $wgGroupPermissions['user']['sendemail'] = true;
3058 // Implicit group for accounts that pass $wgAutoConfirmAge
3059 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3061 // Users with bot privilege can have their edits hidden
3062 // from various log pages by default
3063 $wgGroupPermissions['bot']['bot'] = true;
3064 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3065 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3066 $wgGroupPermissions['bot']['autopatrol'] = true;
3067 $wgGroupPermissions['bot']['suppressredirect'] = true;
3068 $wgGroupPermissions['bot']['apihighlimits'] = true;
3069 $wgGroupPermissions['bot']['writeapi'] = true;
3070 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3072 // Most extra permission abilities go to this group
3073 $wgGroupPermissions['sysop']['block'] = true;
3074 $wgGroupPermissions['sysop']['createaccount'] = true;
3075 $wgGroupPermissions['sysop']['delete'] = true;
3076 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3077 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3078 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3079 $wgGroupPermissions['sysop']['undelete'] = true;
3080 $wgGroupPermissions['sysop']['editinterface'] = true;
3081 $wgGroupPermissions['sysop']['editusercss'] = true;
3082 $wgGroupPermissions['sysop']['edituserjs'] = true;
3083 $wgGroupPermissions['sysop']['import'] = true;
3084 $wgGroupPermissions['sysop']['importupload'] = true;
3085 $wgGroupPermissions['sysop']['move'] = true;
3086 $wgGroupPermissions['sysop']['move-subpages'] = true;
3087 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3088 $wgGroupPermissions['sysop']['patrol'] = true;
3089 $wgGroupPermissions['sysop']['autopatrol'] = true;
3090 $wgGroupPermissions['sysop']['protect'] = true;
3091 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3092 $wgGroupPermissions['sysop']['rollback'] = true;
3093 $wgGroupPermissions['sysop']['trackback'] = true;
3094 $wgGroupPermissions['sysop']['upload'] = true;
3095 $wgGroupPermissions['sysop']['reupload'] = true;
3096 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3097 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3098 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3099 $wgGroupPermissions['sysop']['upload_by_url'] = true;
3100 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3101 $wgGroupPermissions['sysop']['blockemail'] = true;
3102 $wgGroupPermissions['sysop']['markbotedits'] = true;
3103 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3104 $wgGroupPermissions['sysop']['browsearchive'] = true;
3105 $wgGroupPermissions['sysop']['noratelimit'] = true;
3106 $wgGroupPermissions['sysop']['movefile'] = true;
3107 $wgGroupPermissions['sysop']['unblockself'] = true;
3108 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3110 // Permission to change users' group assignments
3111 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3112 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3113 // Permission to change users' groups assignments across wikis
3114 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3115 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3116 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3118 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3119 // To hide usernames from users and Sysops
3120 #$wgGroupPermissions['suppress']['hideuser'] = true;
3121 // To hide revisions/log items from users and Sysops
3122 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3123 // For private suppression log access
3124 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3127 * The developer group is deprecated, but can be activated if need be
3128 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3129 * that a lock file be defined and creatable/removable by the web
3132 # $wgGroupPermissions['developer']['siteadmin'] = true;
3137 * Permission keys revoked from users in each group.
3138 * This acts the same way as wgGroupPermissions above, except that
3139 * if the user is in a group here, the permission will be removed from them.
3141 * Improperly setting this could mean that your users will be unable to perform
3142 * certain essential tasks, so use at your own risk!
3144 $wgRevokePermissions = array();
3147 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3149 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3152 * A map of group names that the user is in, to group names that those users
3153 * are allowed to add or revoke.
3155 * Setting the list of groups to add or revoke to true is equivalent to "any group".
3157 * For example, to allow sysops to add themselves to the "bot" group:
3159 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3161 * Implicit groups may be used for the source group, for instance:
3163 * $wgGroupsRemoveFromSelf = array( '*' => true );
3165 * This allows users in the '*' group (i.e. any user) to remove themselves from
3166 * any group that they happen to be in.
3169 $wgGroupsAddToSelf = array();
3171 /** @see $wgGroupsAddToSelf */
3172 $wgGroupsRemoveFromSelf = array();
3175 * Set of available actions that can be restricted via action=protect
3176 * You probably shouldn't change this.
3177 * Translated through restriction-* messages.
3179 $wgRestrictionTypes = array( 'edit', 'move' );
3182 * Rights which can be required for each protection level (via action=protect)
3184 * You can add a new protection level that requires a specific
3185 * permission by manipulating this array. The ordering of elements
3186 * dictates the order on the protection form's lists.
3188 * - '' will be ignored (i.e. unprotected)
3189 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
3191 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
3194 * Set the minimum permissions required to edit pages in each
3195 * namespace. If you list more than one permission, a user must
3196 * have all of them to edit pages in that namespace.
3198 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
3200 $wgNamespaceProtection = array();
3203 * Pages in namespaces in this array can not be used as templates.
3204 * Elements must be numeric namespace ids.
3205 * Among other things, this may be useful to enforce read-restrictions
3206 * which may otherwise be bypassed by using the template machanism.
3208 $wgNonincludableNamespaces = array();
3211 * Number of seconds an account is required to age before it's given the
3212 * implicit 'autoconfirm' group membership. This can be used to limit
3213 * privileges of new accounts.
3215 * Accounts created by earlier versions of the software may not have a
3216 * recorded creation date, and will always be considered to pass the age test.
3218 * When left at 0, all registered accounts will pass.
3222 * $wgAutoConfirmAge = 600; // ten minutes
3223 * $wgAutoConfirmAge = 3600*24; // one day
3226 $wgAutoConfirmAge = 0;
3229 * Number of edits an account requires before it is autoconfirmed.
3230 * Passing both this AND the time requirement is needed. Example:
3233 * $wgAutoConfirmCount = 50;
3236 $wgAutoConfirmCount = 0;
3239 * Automatically add a usergroup to any user who matches certain conditions.
3241 * array( '&' or '|' or '^', cond1, cond2, ... )
3242 * where cond1, cond2, ... are themselves conditions; *OR*
3243 * APCOND_EMAILCONFIRMED, *OR*
3244 * array( APCOND_EMAILCONFIRMED ), *OR*
3245 * array( APCOND_EDITCOUNT, number of edits ), *OR*
3246 * array( APCOND_AGE, seconds since registration ), *OR*
3247 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
3248 * array( APCOND_ISIP, ip ), *OR*
3249 * array( APCOND_IPINRANGE, range ), *OR*
3250 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
3251 * array( APCOND_BLOCKED ), *OR*
3252 * similar constructs defined by extensions.
3254 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
3255 * user who has provided an e-mail address.
3257 $wgAutopromote = array(
3258 'autoconfirmed' => array( '&',
3259 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
3260 array( APCOND_AGE
, &$wgAutoConfirmAge ),
3265 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
3266 * can assign which groups at Special:Userrights. Example configuration:
3269 * // Bureaucrat can add any group
3270 * $wgAddGroups['bureaucrat'] = true;
3271 * // Bureaucrats can only remove bots and sysops
3272 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
3273 * // Sysops can make bots
3274 * $wgAddGroups['sysop'] = array( 'bot' );
3275 * // Sysops can disable other sysops in an emergency, and disable bots
3276 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
3279 $wgAddGroups = array();
3280 /** @see $wgAddGroups */
3281 $wgRemoveGroups = array();
3284 * A list of available rights, in addition to the ones defined by the core.
3285 * For extensions only.
3287 $wgAvailableRights = array();
3290 * Optional to restrict deletion of pages with higher revision counts
3291 * to users with the 'bigdelete' permission. (Default given to sysops.)
3293 $wgDeleteRevisionsLimit = 0;
3295 /** Number of accounts each IP address may create, 0 to disable.
3296 * Requires memcached */
3297 $wgAccountCreationThrottle = 0;
3300 * Edits matching these regular expressions in body text
3301 * will be recognised as spam and rejected automatically.
3303 * There's no administrator override on-wiki, so be careful what you set. :)
3304 * May be an array of regexes or a single string for backwards compatibility.
3306 * See http://en.wikipedia.org/wiki/Regular_expression
3307 * Note that each regex needs a beginning/end delimiter, eg: # or /
3309 $wgSpamRegex = array();
3311 /** Same as the above except for edit summaries */
3312 $wgSummarySpamRegex = array();
3315 * Similarly you can get a function to do the job. The function will be given
3316 * the following args:
3317 * - a Title object for the article the edit is made on
3318 * - the text submitted in the textarea (wpTextbox1)
3319 * - the section number.
3320 * The return should be boolean indicating whether the edit matched some evilness:
3322 * - false : let it through
3324 * @deprecated Use hooks. See SpamBlacklist extension.
3326 $wgFilterCallback = false;
3329 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3332 $wgEnableDnsBlacklist = false;
3335 * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
3338 $wgEnableSorbs = false;
3341 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
3344 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3347 * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
3350 $wgSorbsUrl = array();
3353 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3354 * what the other methods might say.
3356 $wgProxyWhitelist = array();
3359 * Simple rate limiter options to brake edit floods. Maximum number actions
3360 * allowed in the given number of seconds; after that the violating client re-
3361 * ceives HTTP 500 error pages until the period elapses.
3363 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3365 * This option set is experimental and likely to change. Requires memcached.
3367 $wgRateLimits = array(
3369 'anon' => null, // for any and all anonymous edits (aggregate)
3370 'user' => null, // for each logged-in user
3371 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3372 'ip' => null, // for each anon and recent account
3373 'subnet' => null, // ... with final octet removed
3381 'mailpassword' => array(
3384 'emailuser' => array(
3390 * Set to a filename to log rate limiter hits.
3392 $wgRateLimitLog = null;
3395 * Array of groups which should never trigger the rate limiter
3397 * @deprecated as of 1.13.0, the preferred method is using
3398 * $wgGroupPermissions[]['noratelimit']. However, this will still
3401 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3403 $wgRateLimitsExcludedGroups = array();
3406 * Array of IPs which should be excluded from rate limits.
3407 * This may be useful for whitelisting NAT gateways for conferences, etc.
3408 * Wiki administrators can add additional IP addresses via
3409 * [[MediaWiki:Ratelimit-excluded-ips]]
3411 $wgRateLimitsExcludedIPs = array();
3414 * Log IP addresses in the recentchanges table; can be accessed only by
3415 * extensions (e.g. CheckUser) or a DB admin
3417 $wgPutIPinRC = true;
3420 * Limit password attempts to X attempts per Y seconds per IP per account.
3421 * Requires memcached.
3423 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3425 /** @} */ # end of user rights settings
3427 /************************************************************************//**
3428 * @name Proxy scanner settings
3433 * If you enable this, every editor's IP address will be scanned for open HTTP
3436 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
3437 * ISP and ask for your server to be shut down.
3439 * You have been warned.
3441 $wgBlockOpenProxies = false;
3442 /** Port we want to scan for a proxy */
3443 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
3444 /** Script used to scan */
3445 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
3447 $wgProxyMemcExpiry = 86400;
3448 /** This should always be customised in LocalSettings.php */
3449 $wgSecretKey = false;
3450 /** big list of banned IP addresses, in the keys not the values */
3451 $wgProxyList = array();
3453 $wgProxyKey = false;
3455 /** @} */ # end of proxy scanner settings
3457 /************************************************************************//**
3458 * @name Cookie settings
3463 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
3465 $wgCookieExpiration = 30*86400;
3468 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
3469 * or ".any.subdomain.net"
3471 $wgCookieDomain = '';
3472 $wgCookiePath = '/';
3473 $wgCookieSecure = ($wgProto == 'https');
3474 $wgDisableCookieCheck = false;
3477 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
3478 * using the database name.
3480 $wgCookiePrefix = false;
3483 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
3484 * in browsers that support this feature. This can mitigates some classes of
3487 * Only supported on PHP 5.2 or higher.
3489 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
3492 * If the requesting browser matches a regex in this blacklist, we won't
3493 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
3495 $wgHttpOnlyBlacklist = array(
3496 // Internet Explorer for Mac; sometimes the cookies work, sometimes
3497 // they don't. It's difficult to predict, as combinations of path
3498 // and expiration options affect its parsing.
3499 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
3502 /** A list of cookies that vary the cache (for use by extensions) */
3503 $wgCacheVaryCookies = array();
3505 /** Override to customise the session name */
3506 $wgSessionName = false;
3508 /** @} */ # end of cookie settings }
3510 /************************************************************************//**
3511 * @name LaTeX (mathematical formulas)
3516 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
3517 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
3518 * (ImageMagick) installed and available in the PATH.
3519 * Please see math/README for more information.
3522 /** Location of the texvc binary */
3523 $wgTexvc = $IP . '/math/texvc';
3525 * Texvc background color
3526 * use LaTeX color format as used in \special function
3527 * for transparent background use value 'Transparent' for alpha transparency or
3528 * 'transparent' for binary transparency.
3530 $wgTexvcBackgroundColor = 'transparent';
3533 * Normally when generating math images, we double-check that the
3534 * directories we want to write to exist, and that files that have
3535 * been generated still exist when we need to bring them up again.
3537 * This lets us give useful error messages in case of permission
3538 * problems, and automatically rebuild images that have been lost.
3540 * On a big site with heavy NFS traffic this can be slow and flaky,
3541 * so sometimes we want to short-circuit it by setting this to false.
3543 $wgMathCheckFiles = true;
3545 /* @} */ # end LaTeX }
3547 /************************************************************************//**
3548 * @name Profiling, testing and debugging
3550 * To enable profiling, edit StartProfiler.php
3556 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
3557 * The debug log file should be not be publicly accessible if it is used, as it
3558 * may contain private data.
3560 $wgDebugLogFile = '';
3563 * Prefix for debug log lines
3565 $wgDebugLogPrefix = '';
3568 * If true, instead of redirecting, show a page with a link to the redirect
3569 * destination. This allows for the inspection of PHP error messages, and easy
3570 * resubmission of form data. For developer use only.
3572 $wgDebugRedirects = false;
3575 * If true, log debugging data from action=raw.
3576 * This is normally false to avoid overlapping debug entries due to gen=css and
3579 $wgDebugRawPage = false;
3582 * Send debug data to an HTML comment in the output.
3584 * This may occasionally be useful when supporting a non-technical end-user. It's
3585 * more secure than exposing the debug log file to the web, since the output only
3586 * contains private data for the current user. But it's not ideal for development
3587 * use since data is lost on fatal errors and redirects.
3589 $wgDebugComments = false;
3592 * Write SQL queries to the debug log
3594 $wgDebugDumpSql = false;
3597 * Set to an array of log group keys to filenames.
3598 * If set, wfDebugLog() output for that group will go to that file instead
3599 * of the regular $wgDebugLogFile. Useful for enabling selective logging
3602 $wgDebugLogGroups = array();
3605 * Display debug data at the bottom of the main content area.
3607 * Useful for developers and technical users trying to working on a closed wiki.
3609 $wgShowDebug = false;
3612 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
3614 $wgDebugTimestamps = false;
3617 * Print HTTP headers for every request in the debug information.
3619 $wgDebugPrintHttpHeaders = true;
3622 * Show the contents of $wgHooks in Special:Version
3624 $wgSpecialVersionShowHooks = false;
3627 * Whether to show "we're sorry, but there has been a database error" pages.
3628 * Displaying errors aids in debugging, but may display information useful
3631 $wgShowSQLErrors = false;
3634 * If set to true, uncaught exceptions will print a complete stack trace
3635 * to output. This should only be used for debugging, as it may reveal
3636 * private information in function parameters due to PHP's backtrace
3639 $wgShowExceptionDetails = false;
3642 * If true, show a backtrace for database errors
3644 $wgShowDBErrorBacktrace = false;
3647 * Expose backend server host names through the API and various HTML comments
3649 $wgShowHostnames = false;
3652 * If set to true MediaWiki will throw notices for some possible error
3653 * conditions and for deprecated functions.
3655 $wgDevelopmentWarnings = false;
3657 /** Only record profiling info for pages that took longer than this */
3658 $wgProfileLimit = 0.0;
3660 /** Don't put non-profiling info into log file */
3661 $wgProfileOnly = false;
3664 * Log sums from profiling into "profiling" table in db.
3666 * You have to create a 'profiling' table in your database before using
3667 * this feature, see maintenance/archives/patch-profiling.sql
3669 * To enable profiling, edit StartProfiler.php
3671 $wgProfileToDatabase = false;
3673 /** If true, print a raw call tree instead of per-function report */
3674 $wgProfileCallTree = false;
3676 /** Should application server host be put into profiling table */
3677 $wgProfilePerHost = false;
3680 * Host for UDP profiler.
3682 * The host should be running a daemon which can be obtained from MediaWiki
3683 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
3685 $wgUDPProfilerHost = '127.0.0.1';
3688 * Port for UDP profiler.
3689 * @see $wgUDPProfilerHost
3691 $wgUDPProfilerPort = '3811';
3693 /** Detects non-matching wfProfileIn/wfProfileOut calls */
3694 $wgDebugProfiling = false;
3696 /** Output debug message on every wfProfileIn/wfProfileOut */
3697 $wgDebugFunctionEntry = 0;
3700 * Destination for wfIncrStats() data...
3701 * 'cache' to go into the system cache, if enabled (memcached)
3702 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
3705 $wgStatsMethod = 'cache';
3707 /** Whereas to count the number of time an article is viewed.
3708 * Does not work if pages are cached (for example with squid).
3710 $wgDisableCounters = false;
3713 * Support blog-style "trackbacks" for articles. See
3714 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3716 $wgUseTrackbacks = false;
3719 * Parser test suite files to be run by parserTests.php when no specific
3720 * filename is passed to it.
3722 * Extensions may add their own tests to this array, or site-local tests
3723 * may be added via LocalSettings.php
3727 $wgParserTestFiles = array(
3728 "$IP/maintenance/tests/parser/parserTests.txt",
3729 "$IP/maintenance/tests/parser/ExtraParserTests.txt"
3733 * If configured, specifies target CodeReview installation to send test
3734 * result data from 'parserTests.php --upload'
3736 * Something like this:
3737 * $wgParserTestRemote = array(
3738 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
3739 * 'repo' => 'MediaWiki',
3740 * 'suite' => 'ParserTests',
3741 * 'path' => '/trunk/phase3', // not used client-side; for reference
3742 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
3745 $wgParserTestRemote = false;
3747 /** @} */ # end of profiling, testing and debugging }
3749 /************************************************************************//**
3755 * Set this to true to disable the full text search feature.
3757 $wgDisableTextSearch = false;
3760 * Set to true to have nicer highligted text in search results,
3761 * by default off due to execution overhead
3763 $wgAdvancedSearchHighlighting = false;
3766 * Regexp to match word boundaries, defaults for non-CJK languages
3767 * should be empty for CJK since the words are not separate
3769 * @todo FIXME: checks for lower than required PHP version (5.1.x).
3771 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
3772 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
3775 * Set to true to have the search engine count total
3776 * search matches to present in the Special:Search UI.
3777 * Not supported by every search engine shipped with MW.
3779 * This could however be slow on larger wikis, and is pretty flaky
3780 * with the current title vs content split. Recommend avoiding until
3781 * that's been worked out cleanly; but this may aid in testing the
3782 * search UI and API to confirm that the result count works.
3784 $wgCountTotalSearchHits = false;
3787 * Template for OpenSearch suggestions, defaults to API action=opensearch
3789 * Sites with heavy load would tipically have these point to a custom
3790 * PHP wrapper to avoid firing up mediawiki for every keystroke
3792 * Placeholders: {searchTerms}
3795 $wgOpenSearchTemplate = false;
3798 * Enable suggestions while typing in search boxes
3799 * (results are passed around in OpenSearch format)
3800 * Requires $wgEnableOpenSearchSuggest = true;
3802 $wgEnableMWSuggest = false;
3805 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
3806 * false if you've disabled MWSuggest or another suggestion script and
3807 * want reduce load caused by cached scripts pulling suggestions.
3809 $wgEnableOpenSearchSuggest = true;
3812 * Expiry time for search suggestion responses
3814 $wgSearchSuggestCacheExpiry = 1200;
3817 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
3819 * Placeholders: {searchTerms}, {namespaces}, {dbname}
3822 $wgMWSuggestTemplate = false;
3825 * If you've disabled search semi-permanently, this also disables updates to the
3826 * table. If you ever re-enable, be sure to rebuild the search table.
3828 $wgDisableSearchUpdate = false;
3831 * List of namespaces which are searched by default. Example:
3834 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
3835 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
3838 $wgNamespacesToBeSearchedDefault = array(
3843 * Namespaces to be searched when user clicks the "Help" tab
3846 * Same format as $wgNamespacesToBeSearchedDefault
3848 $wgNamespacesToBeSearchedHelp = array(
3854 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
3855 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
3858 $wgSearchEverythingOnlyLoggedIn = false;
3861 * Disable the internal MySQL-based search, to allow it to be
3862 * implemented by an extension instead.
3864 $wgDisableInternalSearch = false;
3867 * Set this to a URL to forward search requests to some external location.
3868 * If the URL includes '$1', this will be replaced with the URL-encoded
3871 * For example, to forward to Google you'd have something like:
3872 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3873 * '&domains=http://example.com' .
3874 * '&sitesearch=http://example.com' .
3875 * '&ie=utf-8&oe=utf-8';
3877 $wgSearchForwardUrl = null;
3880 * Search form behavior
3881 * true = use Go & Search buttons
3882 * false = use Go button & Advanced search link
3884 $wgUseTwoButtonsSearchForm = true;
3887 * Array of namespaces to generate a Google sitemap for when the
3888 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
3889 * nerated for all namespaces.
3891 $wgSitemapNamespaces = false;
3893 /** @} */ # end of search settings
3895 /************************************************************************//**
3896 * @name Edit user interface
3901 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
3902 * fall back to the old behaviour (no merging).
3904 $wgDiff3 = '/usr/bin/diff3';
3907 * Path to the GNU diff utility.
3909 $wgDiff = '/usr/bin/diff';
3912 * Which namespaces have special treatment where they should be preview-on-open
3913 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
3914 * can specify namespaces of pages they have special treatment for
3916 $wgPreviewOnOpenNamespaces = array(
3921 * Activate external editor interface for files and pages
3922 * See http://www.mediawiki.org/wiki/Manual:External_editors
3924 $wgUseExternalEditor = true;
3926 /** Go button goes straight to the edit screen if the article doesn't exist. */
3927 $wgGoToEdit = false;
3930 * Enable the UniversalEditButton for browsers that support it
3931 * (currently only Firefox with an extension)
3932 * See http://universaleditbutton.org for more background information
3934 $wgUniversalEditButton = true;
3937 * If user doesn't specify any edit summary when making a an edit, MediaWiki
3938 * will try to automatically create one. This feature can be disabled by set-
3939 * ting this variable false.
3941 $wgUseAutomaticEditSummaries = true;
3943 /** @} */ # end edit UI }
3945 /************************************************************************//**
3947 * See also $wgSiteNotice
3952 * @cond file_level_code
3953 * Set $wgCommandLineMode if it's not set already, to avoid notices
3955 if( !isset( $wgCommandLineMode ) ) {
3956 $wgCommandLineMode = false;
3960 /** For colorized maintenance script output, is your terminal background dark ? */
3961 $wgCommandLineDarkBg = false;
3964 * Array for extensions to register their maintenance scripts with the
3965 * system. The key is the name of the class and the value is the full
3968 $wgMaintenanceScripts = array();
3971 * Set this to a string to put the wiki into read-only mode. The text will be
3972 * used as an explanation to users.
3974 * This prevents most write operations via the web interface. Cache updates may
3975 * still be possible. To prevent database writes completely, use the read_only
3981 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
3982 * Its contents will be shown to users as part of the read-only warning
3985 * Defaults to "{$wgUploadDirectory}/lock_yBgMBwiR".
3987 $wgReadOnlyFile = false;
3989 /** @} */ # End of maintenance }
3991 /************************************************************************//**
3992 * @name Recent changes, new pages, watchlist and history
3997 * Recentchanges items are periodically purged; entries older than this many
3999 * Default: 13 weeks = about three months
4001 $wgRCMaxAge = 13 * 7 * 24 * 3600;
4004 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
4005 * higher than what will be stored. Note that this is disabled by default
4006 * because we sometimes do have RC data which is beyond the limit for some
4007 * reason, and some users may use the high numbers to display that data which
4010 $wgRCFilterByAge = false;
4013 * List of Days and Limits options to list in the Special:Recentchanges and
4014 * Special:Recentchangeslinked pages.
4016 $wgRCLinkLimits = array( 50, 100, 250, 500 );
4017 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
4020 * Send recent changes updates via UDP. The updates will be formatted for IRC.
4021 * Set this to the IP address of the receiver.
4023 $wgRC2UDPAddress = false;
4026 * Port number for RC updates
4028 $wgRC2UDPPort = false;
4031 * Prefix to prepend to each UDP packet.
4032 * This can be used to identify the wiki. A script is available called
4033 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
4034 * tab to identify the IRC channel to send the log line to.
4036 $wgRC2UDPPrefix = '';
4039 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
4040 * IRC feed. If this is set to a string, that string will be used as the prefix.
4042 $wgRC2UDPInterwikiPrefix = false;
4045 * Set to true to omit "bot" edits (by users with the bot permission) from the
4048 $wgRC2UDPOmitBots = false;
4051 * Enable user search in Special:Newpages
4052 * This is really a temporary hack around an index install bug on some Wikipedias.
4053 * Kill it once fixed.
4055 $wgEnableNewpagesUserFilter = true;
4057 /** Use RC Patrolling to check for vandalism */
4058 $wgUseRCPatrol = true;
4060 /** Use new page patrolling to check new pages on Special:Newpages */
4061 $wgUseNPPatrol = true;
4063 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
4066 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
4067 * eg Recentchanges, Newpages. */
4070 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
4071 * A cached version will continue to be served out even if changes
4072 * are made, until this many seconds runs out since the last render.
4074 * If set to 0, feed caching is disabled. Use this for debugging only;
4075 * feed generation can be pretty slow with diffs.
4077 $wgFeedCacheTimeout = 60;
4079 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
4080 * pages larger than this size. */
4081 $wgFeedDiffCutoff = 32768;
4083 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
4084 * every page. Some sites might have a different feed they'd like to promote
4085 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
4086 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
4087 * of either 'rss' or 'atom'.
4089 $wgOverrideSiteFeed = array();
4092 * Which feed types should we provide by default? This can include 'rss',
4093 * 'atom', neither, or both.
4095 $wgAdvertisedFeedTypes = array( 'atom' );
4097 /** Show watching users in recent changes, watchlist and page history views */
4098 $wgRCShowWatchingUsers = false; # UPO
4099 /** Show watching users in Page views */
4100 $wgPageShowWatchingUsers = false;
4101 /** Show the amount of changed characters in recent changes */
4102 $wgRCShowChangedSize = true;
4105 * If the difference between the character counts of the text
4106 * before and after the edit is below that value, the value will be
4107 * highlighted on the RC page.
4109 $wgRCChangedSizeThreshold = 500;
4112 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
4113 * view for watched pages with new changes */
4114 $wgShowUpdatedMarker = true;
4117 * Disable links to talk pages of anonymous users (IPs) in listings on special
4118 * pages like page history, Special:Recentchanges, etc.
4120 $wgDisableAnonTalk = false;
4123 * Enable filtering of categories in Recentchanges
4125 $wgAllowCategorizedRecentChanges = false;
4128 * Allow filtering by change tag in recentchanges, history, etc
4129 * Has no effect if no tags are defined in valid_tag.
4131 $wgUseTagFilter = true;
4133 /** @} */ # end RC/watchlist }
4135 /************************************************************************//**
4136 * @name Copyright and credits settings
4140 /** RDF metadata toggles */
4141 $wgEnableDublinCoreRdf = false;
4142 $wgEnableCreativeCommonsRdf = false;
4144 /** Override for copyright metadata.
4145 * TODO: these options need documentation
4147 $wgRightsPage = null;
4148 $wgRightsUrl = null;
4149 $wgRightsText = null;
4150 $wgRightsIcon = null;
4153 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
4155 $wgLicenseTerms = false;
4157 /** Set this to some HTML to override the rights icon with an arbitrary logo */
4158 $wgCopyrightIcon = null;
4160 /** Set this to true if you want detailed copyright information forms on Upload. */
4161 $wgUseCopyrightUpload = false;
4163 /** Set this to false if you want to disable checking that detailed copyright
4164 * information values are not empty. */
4165 $wgCheckCopyrightUpload = true;
4168 * Set this to the number of authors that you want to be credited below an
4169 * article text. Set it to zero to hide the attribution block, and a negative
4170 * number (like -1) to show all authors. Note that this will require 2-3 extra
4171 * database hits, which can have a not insignificant impact on performance for
4176 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
4177 * Otherwise, link to a separate credits page. */
4178 $wgShowCreditsIfMax = true;
4180 /** @} */ # end of copyright and credits settings }
4182 /************************************************************************//**
4183 * @name Import / Export
4188 * List of interwiki prefixes for wikis we'll accept as sources for
4189 * Special:Import (for sysops). Since complete page history can be imported,
4190 * these should be 'trusted'.
4192 * If a user has the 'import' permission but not the 'importupload' permission,
4193 * they will only be able to run imports through this transwiki interface.
4195 $wgImportSources = array();
4198 * Optional default target namespace for interwiki imports.
4199 * Can use this to create an incoming "transwiki"-style queue.
4200 * Set to numeric key, not the name.
4202 * Users may override this in the Special:Import dialog.
4204 $wgImportTargetNamespace = null;
4207 * If set to false, disables the full-history option on Special:Export.
4208 * This is currently poorly optimized for long edit histories, so is
4209 * disabled on Wikimedia's sites.
4211 $wgExportAllowHistory = true;
4214 * If set nonzero, Special:Export requests for history of pages with
4215 * more revisions than this will be rejected. On some big sites things
4216 * could get bogged down by very very long pages.
4218 $wgExportMaxHistory = 0;
4221 * Return distinct author list (when not returning full history)
4223 $wgExportAllowListContributors = false ;
4226 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
4227 * up to this specified level, which will cause it to include all
4228 * pages linked to from the pages you specify. Since this number
4229 * can become *insanely large* and could easily break your wiki,
4230 * it's disabled by default for now.
4232 * There's a HARD CODED limit of 5 levels of recursion to prevent a
4233 * crazy-big export from being done by someone setting the depth
4234 * number too high. In other words, last resort safety net.
4236 $wgExportMaxLinkDepth = 0;
4239 * Whether to allow the "export all pages in namespace" option
4241 $wgExportFromNamespaces = false;
4243 /** @} */ # end of import/export }
4245 /*************************************************************************//**
4251 * A list of callback functions which are called once MediaWiki is fully initialised
4253 $wgExtensionFunctions = array();
4256 * Extension functions for initialisation of skins. This is called somewhat earlier
4257 * than $wgExtensionFunctions.
4259 $wgSkinExtensionFunctions = array();
4262 * Extension messages files.
4264 * Associative array mapping extension name to the filename where messages can be
4265 * found. The file should contain variable assignments. Any of the variables
4266 * present in languages/messages/MessagesEn.php may be defined, but $messages
4267 * is the most common.
4269 * Variables defined in extensions will override conflicting variables defined
4273 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
4276 $wgExtensionMessagesFiles = array();
4279 * Aliases for special pages provided by extensions.
4280 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
4282 $wgExtensionAliasesFiles = array();
4285 * Parser output hooks.
4286 * This is an associative array where the key is an extension-defined tag
4287 * (typically the extension name), and the value is a PHP callback.
4288 * These will be called as an OutputPageParserOutput hook, if the relevant
4289 * tag has been registered with the parser output object.
4291 * Registration is done with $pout->addOutputHook( $tag, $data ).
4293 * The callback has the form:
4294 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
4296 $wgParserOutputHooks = array();
4299 * List of valid skin names.
4300 * The key should be the name in all lower case, the value should be a display name.
4301 * The default skins will be added later, by Skin::getSkinNames(). Use
4302 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
4304 $wgValidSkinNames = array();
4307 * Special page list.
4308 * See the top of SpecialPage.php for documentation.
4310 $wgSpecialPages = array();
4313 * Array mapping class names to filenames, for autoloading.
4315 $wgAutoloadClasses = array();
4318 * An array of extension types and inside that their names, versions, authors,
4319 * urls, descriptions and pointers to localized description msgs. Note that
4320 * the version, url, description and descriptionmsg key can be omitted.
4323 * $wgExtensionCredits[$type][] = array(
4324 * 'name' => 'Example extension',
4326 * 'path' => __FILE__,
4327 * 'author' => 'Foo Barstein',
4328 * 'url' => 'http://wwww.example.com/Example%20Extension/',
4329 * 'description' => 'An example extension',
4330 * 'descriptionmsg' => 'exampleextension-desc',
4334 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
4335 * Where 'descriptionmsg' can be an array with message key and parameters:
4336 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
4338 $wgExtensionCredits = array();
4341 * Authentication plugin.
4346 * Global list of hooks.
4347 * Add a hook by doing:
4348 * $wgHooks['event_name'][] = $function;
4350 * $wgHooks['event_name'][] = array($function, $data);
4352 * $wgHooks['event_name'][] = array($object, 'method');
4357 * Maps jobs to their handling classes; extensions
4358 * can add to this to provide custom jobs
4360 $wgJobClasses = array(
4361 'refreshLinks' => 'RefreshLinksJob',
4362 'refreshLinks2' => 'RefreshLinksJob2',
4363 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
4364 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
4365 'sendMail' => 'EmaillingJob',
4366 'enotifNotify' => 'EnotifNotifyJob',
4367 'fixDoubleRedirect' => 'DoubleRedirectJob',
4368 'uploadFromUrl' => 'UploadFromUrlJob',
4372 * Additional functions to be performed with updateSpecialPages.
4373 * Expensive Querypages are already updated.
4375 $wgSpecialPageCacheUpdates = array(
4376 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
4380 * Hooks that are used for outputting exceptions. Format is:
4381 * $wgExceptionHooks[] = $funcname
4383 * $wgExceptionHooks[] = array( $class, $funcname )
4384 * Hooks should return strings or false
4386 $wgExceptionHooks = array();
4389 * List of page property names and descriptions of what they are.
4390 * This is used for the API prop=pageprops module to know which
4391 * page props to search for. The help message is only seen from
4392 * the API help page.
4394 $wgPageProps = array(
4395 'displaytitle' => 'Value of the {{DISPLAYTITLE}} tag',
4396 'defaultsort' => 'Value of the {{DEFAULTSORT}} tag',
4397 'hiddencat' => 'Whether or not the page has a category with the __HIDDENCAT__ magic word',
4401 * Page property link table invalidation lists. When a page property
4402 * changes, this may require other link tables to be updated (eg
4403 * adding __HIDDENCAT__ means the hiddencat tracking category will
4404 * have been added, so the categorylinks table needs to be rebuilt).
4405 * This array can be added to by extensions.
4407 $wgPagePropLinkInvalidations = array(
4408 'hiddencat' => 'categorylinks',
4411 /** @} */ # End extensions }
4413 /*************************************************************************//**
4419 * Use experimental, DMOZ-like category browser
4421 $wgUseCategoryBrowser = false;
4424 * On category pages, show thumbnail gallery for images belonging to that
4425 * category instead of listing them as articles.
4427 $wgCategoryMagicGallery = true;
4430 * Paging limit for categories
4432 $wgCategoryPagingLimit = 200;
4435 * A version indicator for collations that will be stored in cl_collation for
4436 * all new rows. Used when the collation algorithm changes: a script checks
4437 * for all rows where cl_collation != $wgCategoryCollation and regenerates
4438 * cl_sortkey based on the page name and cl_sortkey_prefix.
4440 * Currently only supports 'uppercase', which just uppercases the string. This
4441 * is a dummy collation, to be replaced later by real ones.
4443 $wgCategoryCollation = 'uppercase';
4445 /** @} */ # End categories }
4447 /*************************************************************************//**
4453 * The logging system has two levels: an event type, which describes the
4454 * general category and can be viewed as a named subset of all logs; and
4455 * an action, which is a specific kind of event that can exist in that
4458 $wgLogTypes = array( '',
4472 * This restricts log access to those who have a certain right
4473 * Users without this will not see it in the option menu and can not view it
4474 * Restricted logs are not added to recent changes
4475 * Logs should remain non-transcludable
4476 * Format: logtype => permissiontype
4478 $wgLogRestrictions = array(
4479 'suppress' => 'suppressionlog'
4483 * Show/hide links on Special:Log will be shown for these log types.
4485 * This is associative array of log type => boolean "hide by default"
4487 * See $wgLogTypes for a list of available log types.
4490 * $wgFilterLogTypes => array(
4492 * 'import' => false,
4495 * Will display show/hide links for the move and import logs. Move logs will be
4496 * hidden by default unless the link is clicked. Import logs will be shown by
4497 * default, and hidden when the link is clicked.
4499 * A message of the form log-show-hide-<type> should be added, and will be used
4500 * for the link text.
4502 $wgFilterLogTypes = array(
4507 * Lists the message key string for each log type. The localized messages
4508 * will be listed in the user interface.
4510 * Extensions with custom log types may add to this array.
4512 $wgLogNames = array(
4513 '' => 'all-logs-page',
4514 'block' => 'blocklogpage',
4515 'protect' => 'protectlogpage',
4516 'rights' => 'rightslog',
4517 'delete' => 'dellogpage',
4518 'upload' => 'uploadlogpage',
4519 'move' => 'movelogpage',
4520 'import' => 'importlogpage',
4521 'patrol' => 'patrol-log-page',
4522 'merge' => 'mergelog',
4523 'suppress' => 'suppressionlog',
4527 * Lists the message key string for descriptive text to be shown at the
4528 * top of each log type.
4530 * Extensions with custom log types may add to this array.
4532 $wgLogHeaders = array(
4533 '' => 'alllogstext',
4534 'block' => 'blocklogtext',
4535 'protect' => 'protectlogtext',
4536 'rights' => 'rightslogtext',
4537 'delete' => 'dellogpagetext',
4538 'upload' => 'uploadlogpagetext',
4539 'move' => 'movelogpagetext',
4540 'import' => 'importlogpagetext',
4541 'patrol' => 'patrol-log-header',
4542 'merge' => 'mergelogpagetext',
4543 'suppress' => 'suppressionlogtext',
4547 * Lists the message key string for formatting individual events of each
4548 * type and action when listed in the logs.
4550 * Extensions with custom log types may add to this array.
4552 $wgLogActions = array(
4553 'block/block' => 'blocklogentry',
4554 'block/unblock' => 'unblocklogentry',
4555 'block/reblock' => 'reblock-logentry',
4556 'protect/protect' => 'protectedarticle',
4557 'protect/modify' => 'modifiedarticleprotection',
4558 'protect/unprotect' => 'unprotectedarticle',
4559 'protect/move_prot' => 'movedarticleprotection',
4560 'rights/rights' => 'rightslogentry',
4561 'delete/delete' => 'deletedarticle',
4562 'delete/restore' => 'undeletedarticle',
4563 'delete/revision' => 'revdelete-logentry',
4564 'delete/event' => 'logdelete-logentry',
4565 'upload/upload' => 'uploadedimage',
4566 'upload/overwrite' => 'overwroteimage',
4567 'upload/revert' => 'uploadedimage',
4568 'move/move' => '1movedto2',
4569 'move/move_redir' => '1movedto2_redir',
4570 'move/move_rev' => 'moverevlogentry',
4571 'import/upload' => 'import-logentry-upload',
4572 'import/interwiki' => 'import-logentry-interwiki',
4573 'merge/merge' => 'pagemerge-logentry',
4574 'suppress/revision' => 'revdelete-logentry',
4575 'suppress/file' => 'revdelete-logentry',
4576 'suppress/event' => 'logdelete-logentry',
4577 'suppress/delete' => 'suppressedarticle',
4578 'suppress/block' => 'blocklogentry',
4579 'suppress/reblock' => 'reblock-logentry',
4580 'patrol/patrol' => 'patrol-log-line',
4584 * The same as above, but here values are names of functions,
4586 * @see LogPage::actionText
4588 $wgLogActionsHandlers = array();
4591 * Maintain a log of newusers at Log/newusers?
4593 $wgNewUserLog = true;
4596 * Log the automatic creations of new users accounts?
4598 $wgLogAutocreatedAccounts = false;
4600 /** @} */ # end logging }
4602 /*************************************************************************//**
4603 * @name Special pages (general and miscellaneous)
4608 * Allow special page inclusions such as {{Special:Allpages}}
4610 $wgAllowSpecialInclusion = true;
4613 * Set this to an array of special page names to prevent
4614 * maintenance/updateSpecialPages.php from updating those pages.
4616 $wgDisableQueryPageUpdate = false;
4619 * List of special pages, followed by what subtitle they should go under
4620 * at Special:SpecialPages
4622 $wgSpecialPageGroups = array(
4623 'DoubleRedirects' => 'maintenance',
4624 'BrokenRedirects' => 'maintenance',
4625 'Lonelypages' => 'maintenance',
4626 'Uncategorizedpages' => 'maintenance',
4627 'Uncategorizedcategories' => 'maintenance',
4628 'Uncategorizedimages' => 'maintenance',
4629 'Uncategorizedtemplates' => 'maintenance',
4630 'Unusedcategories' => 'maintenance',
4631 'Unusedimages' => 'maintenance',
4632 'Protectedpages' => 'maintenance',
4633 'Protectedtitles' => 'maintenance',
4634 'Unusedtemplates' => 'maintenance',
4635 'Withoutinterwiki' => 'maintenance',
4636 'Longpages' => 'maintenance',
4637 'Shortpages' => 'maintenance',
4638 'Ancientpages' => 'maintenance',
4639 'Deadendpages' => 'maintenance',
4640 'Wantedpages' => 'maintenance',
4641 'Wantedcategories' => 'maintenance',
4642 'Wantedfiles' => 'maintenance',
4643 'Wantedtemplates' => 'maintenance',
4644 'Unwatchedpages' => 'maintenance',
4645 'Fewestrevisions' => 'maintenance',
4647 'Userlogin' => 'login',
4648 'Userlogout' => 'login',
4649 'CreateAccount' => 'login',
4651 'Recentchanges' => 'changes',
4652 'Recentchangeslinked' => 'changes',
4653 'Watchlist' => 'changes',
4654 'Newimages' => 'changes',
4655 'Newpages' => 'changes',
4657 'Tags' => 'changes',
4659 'Upload' => 'media',
4660 'Listfiles' => 'media',
4661 'MIMEsearch' => 'media',
4662 'FileDuplicateSearch' => 'media',
4663 'Filepath' => 'media',
4665 'Listusers' => 'users',
4666 'Activeusers' => 'users',
4667 'Listgrouprights' => 'users',
4668 'Ipblocklist' => 'users',
4669 'Contributions' => 'users',
4670 'Emailuser' => 'users',
4671 'Listadmins' => 'users',
4672 'Listbots' => 'users',
4673 'Userrights' => 'users',
4674 'Blockip' => 'users',
4675 'Preferences' => 'users',
4676 'Resetpass' => 'users',
4677 'DeletedContributions' => 'users',
4679 'Mostlinked' => 'highuse',
4680 'Mostlinkedcategories' => 'highuse',
4681 'Mostlinkedtemplates' => 'highuse',
4682 'Mostcategories' => 'highuse',
4683 'Mostimages' => 'highuse',
4684 'Mostrevisions' => 'highuse',
4686 'Allpages' => 'pages',
4687 'Prefixindex' => 'pages',
4688 'Listredirects' => 'pages',
4689 'Categories' => 'pages',
4690 'Disambiguations' => 'pages',
4692 'Randompage' => 'redirects',
4693 'Randomredirect' => 'redirects',
4694 'Mypage' => 'redirects',
4695 'Mytalk' => 'redirects',
4696 'Mycontributions' => 'redirects',
4697 'Search' => 'redirects',
4698 'LinkSearch' => 'redirects',
4700 'ComparePages' => 'pagetools',
4701 'Movepage' => 'pagetools',
4702 'MergeHistory' => 'pagetools',
4703 'Revisiondelete' => 'pagetools',
4704 'Undelete' => 'pagetools',
4705 'Export' => 'pagetools',
4706 'Import' => 'pagetools',
4707 'Whatlinkshere' => 'pagetools',
4709 'Statistics' => 'wiki',
4710 'Version' => 'wiki',
4712 'Unlockdb' => 'wiki',
4713 'Allmessages' => 'wiki',
4714 'Popularpages' => 'wiki',
4716 'Specialpages' => 'other',
4717 'Blockme' => 'other',
4718 'Booksources' => 'other',
4721 /** Whether or not to sort special pages in Special:Specialpages */
4723 $wgSortSpecialPages = true;
4726 * Filter for Special:Randompage. Part of a WHERE clause
4727 * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
4729 $wgExtraRandompageSQL = false;
4732 * On Special:Unusedimages, consider images "used", if they are put
4733 * into a category. Default (false) is not to count those as used.
4735 $wgCountCategorizedImagesAsUsed = false;
4738 * Maximum number of links to a redirect page listed on
4739 * Special:Whatlinkshere/RedirectDestination
4741 $wgMaxRedirectLinksRetrieved = 500;
4743 /** @} */ # end special pages }
4745 /*************************************************************************//**
4746 * @name Robot (search engine crawler) policy
4747 * See also $wgNoFollowLinks.
4752 * Default robot policy. The default policy is to encourage indexing and fol-
4753 * lowing of links. It may be overridden on a per-namespace and/or per-page
4756 $wgDefaultRobotPolicy = 'index,follow';
4759 * Robot policies per namespaces. The default policy is given above, the array
4760 * is made of namespace constants as defined in includes/Defines.php. You can-
4761 * not specify a different default policy for NS_SPECIAL: it is always noindex,
4762 * nofollow. This is because a number of special pages (e.g., ListPages) have
4763 * many permutations of options that display the same data under redundant
4764 * URLs, so search engine spiders risk getting lost in a maze of twisty special
4765 * pages, all alike, and never reaching your actual content.
4768 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
4770 $wgNamespaceRobotPolicies = array();
4773 * Robot policies per article. These override the per-namespace robot policies.
4774 * Must be in the form of an array where the key part is a properly canonical-
4775 * ised text form title and the value is a robot policy.
4777 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
4778 * 'User:Bob' => 'index,follow' );
4779 * Example that DOES NOT WORK because the names are not canonical text forms:
4780 * $wgArticleRobotPolicies = array(
4781 * # Underscore, not space!
4782 * 'Main_Page' => 'noindex,follow',
4783 * # "Project", not the actual project name!
4784 * 'Project:X' => 'index,follow',
4785 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
4786 * 'abc' => 'noindex,nofollow'
4789 $wgArticleRobotPolicies = array();
4792 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
4793 * will not function, so users can't decide whether pages in that namespace are
4794 * indexed by search engines. If set to null, default to $wgContentNamespaces.
4796 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
4798 $wgExemptFromUserRobotsControl = null;
4800 /** @} */ # End robot policy }
4802 /************************************************************************//**
4803 * @name AJAX and API
4804 * Note: The AJAX entry point which this section refers to is gradually being
4805 * replaced by the API entry point, api.php. They are essentially equivalent.
4806 * Both of them are used for dynamic client-side features, via XHR.
4811 * Enable the MediaWiki API for convenient access to
4812 * machine-readable data via api.php
4814 * See http://www.mediawiki.org/wiki/API
4816 $wgEnableAPI = true;
4819 * Allow the API to be used to perform write operations
4820 * (page edits, rollback, etc.) when an authorised user
4823 $wgEnableWriteAPI = true;
4826 * API module extensions
4827 * Associative array mapping module name to class name.
4828 * Extension modules may override the core modules.
4830 $wgAPIModules = array();
4831 $wgAPIMetaModules = array();
4832 $wgAPIPropModules = array();
4833 $wgAPIListModules = array();
4836 * Maximum amount of rows to scan in a DB query in the API
4837 * The default value is generally fine
4839 $wgAPIMaxDBRows = 5000;
4842 * The maximum size (in bytes) of an API result.
4843 * Don't set this lower than $wgMaxArticleSize*1024
4845 $wgAPIMaxResultSize = 8388608;
4848 * The maximum number of uncached diffs that can be retrieved in one API
4849 * request. Set this to 0 to disable API diffs altogether
4851 $wgAPIMaxUncachedDiffs = 1;
4854 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
4855 * API request logging
4857 $wgAPIRequestLog = false;
4860 * Cache the API help text for up to an hour. Disable this during API
4861 * debugging and development
4863 $wgAPICacheHelp = true;
4866 * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
4869 $wgAPICacheHelpTimeout = 60*60;
4872 * Enable AJAX framework
4877 * List of Ajax-callable functions.
4878 * Extensions acting as Ajax callbacks must register here
4880 $wgAjaxExportList = array( 'wfAjaxGetFileUrl' );
4883 * Enable watching/unwatching pages using AJAX.
4884 * Requires $wgUseAjax to be true too.
4885 * Causes wfAjaxWatch to be added to $wgAjaxExportList
4887 $wgAjaxWatch = true;
4890 * Enable AJAX check for file overwrite, pre-upload
4892 $wgAjaxUploadDestCheck = true;
4895 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
4897 $wgAjaxLicensePreview = true;
4900 * Settings for incoming cross-site AJAX requests:
4901 * Newer browsers support cross-site AJAX when the target resource allows requests
4902 * from the origin domain by the Access-Control-Allow-Origin header.
4903 * This is currently only used by the API (requests to api.php)
4904 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
4906 * '*' matches any number of characters
4907 * '?' matches any 1 character
4910 $wgCrossSiteAJAXdomains = array(
4911 'www.mediawiki.org',
4918 $wgCrossSiteAJAXdomains = array();
4921 * Domains that should not be allowed to make AJAX requests,
4922 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
4923 * Uses the same syntax as $wgCrossSiteAJAXdomains
4926 $wgCrossSiteAJAXdomainExceptions = array();
4928 /** @} */ # End AJAX and API }
4930 /************************************************************************//**
4931 * @name Shell and process control
4936 * Maximum amount of virtual memory available to shell processes under linux, in KB.
4938 $wgMaxShellMemory = 102400;
4941 * Maximum file size created by shell processes under linux, in KB
4942 * ImageMagick convert for example can be fairly hungry for scratch space
4944 $wgMaxShellFileSize = 102400;
4947 * Maximum CPU time in seconds for shell processes under linux
4949 $wgMaxShellTime = 180;
4952 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
4954 $wgPhpCli = '/usr/bin/php';
4957 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
4958 * For Unix-like operating systems, set this to to a locale that has a UTF-8
4959 * character set. Only the character set is relevant.
4961 $wgShellLocale = 'en_US.utf8';
4963 /** @} */ # End shell }
4965 /************************************************************************//**
4971 * Timeout for HTTP requests done internally
4973 $wgHTTPTimeout = 25;
4976 * Timeout for Asynchronous (background) HTTP requests
4978 $wgAsyncHTTPTimeout = 25;
4981 * Proxy to use for CURL requests.
4983 $wgHTTPProxy = false;
4985 /** @} */ # End HTTP client }
4987 /************************************************************************//**
4989 * See also $wgEnotifUseJobQ.
4994 * Number of jobs to perform per request. May be less than one in which case
4995 * jobs are performed probabalistically. If this is zero, jobs will not be done
4996 * during ordinary apache requests. In this case, maintenance/runJobs.php should
4997 * be run periodically.
5002 * Number of rows to update per job
5004 $wgUpdateRowsPerJob = 500;
5007 * Number of rows to update per query
5009 $wgUpdateRowsPerQuery = 100;
5011 /** @} */ # End job queue }
5013 /************************************************************************//**
5014 * @name Miscellaneous
5018 /** Allow the "info" action, very inefficient at the moment */
5019 $wgAllowPageInfo = false;
5021 /** Name of the external diff engine to use */
5022 $wgExternalDiffEngine = false;
5025 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
5027 $wgDisabledActions = array();
5030 * Disable redirects to special pages and interwiki redirects, which use a 302
5031 * and have no "redirected from" link.
5033 $wgDisableHardRedirects = false;
5036 * LinkHolderArray batch size
5039 $wgLinkHolderBatchSize = 1000;
5042 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
5043 * use this value to override:
5045 $wgRegisterInternalExternals = false;
5048 * Maximum number of pages to move at once when moving subpages with a page.
5050 $wgMaximumMovedPages = 100;
5053 * Fix double redirects after a page move.
5054 * Tends to conflict with page move vandalism, use only on a private wiki.
5056 $wgFixDoubleRedirects = false;
5059 * Allow redirection to another page when a user logs in.
5060 * To enable, set to a string like 'Main Page'
5062 $wgRedirectOnLogin = null;
5065 * Configuration for processing pool control, for use in high-traffic wikis.
5066 * An implementation is provided in the PoolCounter extension.
5068 * This configuration array maps pool types to an associative array. The only
5069 * defined key in the associative array is "class", which gives the class name.
5070 * The remaining elements are passed through to the class as constructor
5071 * parameters. Example:
5073 * $wgPoolCounterConf = array( 'ArticleView' => array(
5074 * 'class' => 'PoolCounter_Client',
5075 * 'timeout' => 15, // wait timeout in seconds
5076 * 'workers' => 5, // maximum number of active threads in each pool
5077 * 'maxqueue' => 50, // maximum number of total threads in each pool
5078 * ... any extension-specific options...
5081 $wgPoolCounterConf = null;
5084 * To disable file delete/restore temporarily
5086 $wgUploadMaintenance = false;
5089 * The location of the MediaWiki package repository to use.
5094 $wgRepositoryApiLocation = 'http://www.mediawiki.org/w/api.php';
5097 * The location of the remote web interface for the selected repository.
5102 $wgRepositoryLocation = 'http://www.mediawiki.org/wiki/Special:Repository';
5105 * List of package states to filter update detection and extension listing on.
5110 $wgRepositoryPackageStates = array(
5120 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
5122 $wgEnableSelenium = false;
5123 $wgSeleniumTestConfigs = array();
5124 $wgSeleniumConfigFile = null;
5129 * For really cool vim folding this needs to be at the end:
5130 * vim: foldmarker=@{,@} foldmethod=marker