$wgAllowAsyncCopyUploads = false;
/**
- * Max size for uploads, in bytes. Applies to all uploads.
+ * Max size for uploads, in bytes. If not set to an array, applies to all
+ * uploads. If set to an array, per upload type maximums can be set, using the
+ * file and url keys. If the * key is set this value will be used as maximum
+ * for non-specified types.
+ *
+ * For example:
+ * $wgUploadSize = array(
+ * '*' => 250 * 1024,
+ * 'url' => 500 * 1024,
+ * );
+ * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
+ * will have a maximum of 500 kB.
+ *
*/
$wgMaxUploadSize = 1024*1024*100; # 100MB
/**
* Additional email parameters, will be passed as the last argument to mail() call.
+ * If using safe_mode this has no effect
*/
$wgAdditionalMailParams = null;
$wgEnableTooltipsAndAccesskeys = true;
/**
- * Break out of framesets. This can be used to prevent external sites from
- * framing your site with ads.
+ * Break out of framesets. This can be used to prevent clickjacking attacks,
+ * or to prevent external sites from framing your site with ads.
*/
$wgBreakFrames = false;
+/**
+ * The X-Frame-Options header to send on pages sensitive to clickjacking
+ * attacks, such as edit pages. This prevents those pages from being displayed
+ * in a frame or iframe. The options are:
+ *
+ * - 'DENY': Do not allow framing. This is recommended for most wikis.
+ *
+ * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
+ * to allow framing within a trusted domain. This is insecure if there
+ * is a page on the same domain which allows framing of arbitrary URLs.
+ *
+ * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
+ * full compromise of local user accounts. Private wikis behind a
+ * corporate firewall are especially vulnerable. This is not
+ * recommended.
+ *
+ * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
+ * not just edit pages.
+ */
+$wgEditPageFrameOptions = 'DENY';
+
/**
* Disable output compression (enabled by default if zlib is available)
*/
* of new blocks in monobook. vector and modern should work without any special css.
*
* $wgFooterIcons itself is a key/value array.
- * The key os the name of a block that the icons will be wrapped in.
- * The final id varries by skin; Monobook and Vector will turn poweredby into f-poweredbyico
- * while Modern turns it into mw_poweredby.
- * The value is a key/value array of icons. The key may or may not be used by the
- * skin but it can be used to find the icon and unset it or change the icon if needed.
- * This is useful for disabling icons that are set by extensions.
- * The value should be either a string or an array.
- * If it is a string it will be output directly, however some skins may choose to ignore it.
- * An array is the preferred format for the icon, the following keys are used:
+ * The key is the name of a block that the icons will be wrapped in. The final id varies
+ * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
+ * turns it into mw_poweredby. The value is a key/value array of icons. The key may or
+ * may not be used by the skin but it can be used to find the icon and unset it or
+ * change the icon if needed. This is useful for disabling icons that are set by extensions.
+ * The value should be either a string or an array. If it is a string it will be output
+ * directly, however some skins may choose to ignore it. An array is the preferred format
+ * for the icon, the following keys are used:
* src: An absolute url to the image to use for the icon, this is recommended
* but not required, however some skins will ignore icons without an image
* url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted
),
);
+/**
+ * Login / create account link behavior when it's possible for anonymous users to create an account
+ * true = use a combined login / create account link
+ * false = split login and create account into two separate links
+ */
+$wgUseCombinedLoginLink = true;
+
/**
* Search form behavior for Vector skin only
* true = use an icon search button
*/
$wgLivePasswordStrengthChecks = false;
-/**
- * List of weak passwords which shouldn't be allowed.
- * The items should be in lowercase. The check is case insensitive.
- */
-$wgWeakPasswords = array( 'password', 'passpass', 'passpass1' );
-
/**
* Maximum number of Unicode characters in signature
*/
* @since 1.17
*/
$wgSecureLogin = false;
-/**
- * Default for 'use secure login' checkbox
- * @since 1.17
- */
-$wgSecureLoginStickHTTPS = false;
/** @} */ # end user accounts }
* Set of available actions that can be restricted via action=protect
* You probably shouldn't change this.
* Translated through restriction-* messages.
+ * Title::getRestrictionTypes() will remove restrictions that are not
+ * applicable to a specific title (upload currently)
*/
-$wgRestrictionTypes = array( 'edit', 'move' );
+$wgRestrictionTypes = array( 'edit', 'move', 'upload' );
/**
* Rights which can be required for each protection level (via action=protect)
* Use full paths.
*/
$wgParserTestFiles = array(
- "$IP/maintenance/tests/parser/parserTests.txt",
- "$IP/maintenance/tests/parser/ExtraParserTests.txt"
+ "$IP/tests/parser/parserTests.txt",
+ "$IP/tests/parser/extraParserTests.txt"
);
/**
$wgReadOnlyFile = false;
/**
- * If this is set to some string, this opens up config/index.php for upgrades
- * when needed. You will need to provide this key to use it
+ * When you run the web-based upgrade utility, it will tell you what to set
+ * this to in order to authorize the upgrade process. It will subsequently be
+ * used as a password, to authorize further upgrades.
+ *
+ * For security, do not set this to a guessable string. Use the value supplied
+ * by the install/upgrade process. To cause the upgrader to generate a new key,
+ * delete the old key from LocalSettings.php.
*/
$wgUpgradeKey = false;
/**
* List of valid skin names.
- * The key should be the name in all lower case, the value should be a display name.
+ * The key should be the name in all lower case, the value should be a properly
+ * cased name for the skin. This value will be prefixed with "Skin" to create the
+ * class name of the skin to load, and if the skin's class cannot be found through
+ * the autoloader it will be used to load a .php file by that name in the skins directory.
* The default skins will be added later, by Skin::getSkinNames(). Use
* Skin::getSkinNames() as an accessor if you wish to have access to the full list.
*/
$wgCategoryPagingLimit = 200;
/**
- * A version indicator for collations that will be stored in cl_collation for
- * all new rows. Used when the collation algorithm changes: a script checks
- * for all rows where cl_collation != $wgCategoryCollation and regenerates
- * cl_sortkey based on the page name and cl_sortkey_prefix.
+ * Specify how category names should be sorted, when listed on a category page.
+ * A sorting scheme is also known as a collation.
+ *
+ * Available values are:
+ *
+ * - uppercase: Converts the category name to upper case, and sorts by that.
+ *
+ * - uca-default: Provides access to the Unicode Collation Algorithm with
+ * the default element table. This is a compromise collation which sorts
+ * all languages in a mediocre way. However, it is better than "uppercase".
*
- * Currently only supports 'uppercase', which just uppercases the string. This
- * is a dummy collation, to be replaced later by real ones.
+ * To use the uca-default collation, you must have PHP's intl extension
+ * installed. See http://php.net/manual/en/intl.setup.php . The details of the
+ * resulting collation will depend on the version of ICU installed on the
+ * server.
+ *
+ * After you change this, you must run maintenance/updateCollation.php to fix
+ * the sort keys in the database.
*/
$wgCategoryCollation = 'uppercase';
$wgAPIRequestLog = false;
/**
- * Cache the API help text for up to an hour. Disable this during API
- * debugging and development
- */
-$wgAPICacheHelp = true;
-
-/**
- * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
- * is false.
+ * Set the timeout for the API help text cache. If set to 0, caching disabled
*/
$wgAPICacheHelpTimeout = 60*60;
/**
* Enable watching/unwatching pages using AJAX.
* Requires $wgUseAjax to be true too.
- * Causes wfAjaxWatch to be added to $wgAjaxExportList
*/
$wgAjaxWatch = true;
$wgEnableSelenium = false;
$wgSeleniumTestConfigs = array();
$wgSeleniumConfigFile = null;
-
-
+$wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
+$wgDBtestpassword = '';
/**
* For really cool vim folding this needs to be at the end:
dépôts / lhc / web / wiklou.git / blobdiff