8 * To customize your installation, edit "LocalSettings.php". If you make
9 * changes here, they will be lost on next upgrade of MediaWiki!
11 * Note that since all these string interpolations are expanded
12 * before LocalSettings is included, if you localize something
13 * like $wgScriptPath, you must also localize everything that
16 * Documentation is in the source and on:
17 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
21 * @cond file_level_code
22 * This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
24 if( !defined( 'MEDIAWIKI' ) ) {
25 echo "This file is part of MediaWiki and is not a valid entry point\n";
30 # Create a site configuration object. Not used for much in a default install
31 if ( !defined( 'MW_PHP4' ) ) {
32 require_once( "$IP/includes/SiteConfiguration.php" );
33 $wgConf = new SiteConfiguration
;
37 /** MediaWiki version number */
38 $wgVersion = '1.17alpha';
40 /** Name of the site. It must be changed in LocalSettings.php */
41 $wgSitename = 'MediaWiki';
44 * URL of the server. It will be automatically built including https mode.
48 * $wgServer = http://example.com
51 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
52 * wrong server, it will redirect incorrectly after you save a page. In that
53 * case, set this variable to fix it.
57 /** @cond file_level_code */
58 if( isset( $_SERVER['SERVER_NAME'] ) ) {
59 $serverName = $_SERVER['SERVER_NAME'];
60 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
61 $serverName = $_SERVER['HOSTNAME'];
62 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
63 $serverName = $_SERVER['HTTP_HOST'];
64 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
65 $serverName = $_SERVER['SERVER_ADDR'];
67 $serverName = 'localhost';
70 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
72 $wgServer = $wgProto.'://' . $serverName;
73 # If the port is a non-standard one, add it to the URL
74 if( isset( $_SERVER['SERVER_PORT'] )
75 && !strpos( $serverName, ':' )
76 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
77 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
79 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
83 /************************************************************************//**
84 * @name Script path settings
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example.
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
121 * The extension to append to script names by default. This can either be .php
124 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
125 * variable is provided to support those providers.
127 $wgScriptExtension = '.php';
130 * The URL path to index.php.
132 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
137 * The URL path to redirect.php. This is a script that is used by the Nostalgia
140 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
142 $wgRedirectScript = false; ///< defaults to
146 * The URL path to load.php.
148 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
150 $wgLoadScript = false;
152 /************************************************************************//**
153 * @name URLs and file paths
155 * These various web and file path variables are set to their defaults
156 * in Setup.php if they are not explicitly set from LocalSettings.php.
157 * If you do override them, be sure to set them all!
159 * These will relatively rarely need to be set manually, unless you are
160 * splitting style sheets or images outside the main document root.
162 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
163 * the host part, that starts with a slash. In most cases a full URL is also
164 * acceptable. A "directory" is a local file path.
166 * In both paths and directories, trailing slashes should not be included.
172 * The URL path of the skins directory. Defaults to "{$wgScriptPath}/skins"
174 $wgStylePath = false;
175 $wgStyleSheetPath = &$wgStylePath;
178 * The URL path of the skins directory. Should not point to an external domain.
179 * Defaults to "{$wgScriptPath}/skins".
181 $wgLocalStylePath = false;
184 * The URL path of the extensions directory.
185 * Defaults to "{$wgScriptPath}/extensions".
187 $wgExtensionAssetsPath = false;
190 * Filesystem stylesheets directory. Defaults to "{$IP}/skins"
192 $wgStyleDirectory = false;
195 * The URL path for primary article page views. This path should contain $1,
196 * which is replaced by the article title.
198 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
201 $wgArticlePath = false;
204 * The URL path for the images directory. Defaults to "{$wgScriptPath}/images"
206 $wgUploadPath = false;
209 * The filesystem path of the images directory. Defaults to "{$IP}/images".
211 $wgUploadDirectory = false;
214 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
215 * Defaults to "{$wgStylePath}/common/images/wiki.png".
220 * The URL path of the shortcut icon.
222 $wgFavicon = '/favicon.ico';
225 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
226 * Defaults to no icon.
228 $wgAppleTouchIcon = false;
231 * The URL path of the math directory. Defaults to "{$wgUploadPath}/math".
233 * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
234 * set up mathematical formula display.
239 * The filesystem path of the math directory.
240 * Defaults to "{$wgUploadDirectory}/math".
242 * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
243 * set up mathematical formula display.
245 $wgMathDirectory = false;
248 * The local filesystem path to a temporary directory. This is not required to
251 * Defaults to "{$wgUploadDirectory}/tmp".
253 $wgTmpDirectory = false;
256 * If set, this URL is added to the start of $wgUploadPath to form a complete
259 $wgUploadBaseUrl = "";
262 * To set 'pretty' URL paths for actions other than
263 * plain page views, add to this array. For instance:
264 * 'edit' => "$wgScriptPath/edit/$1"
266 * There must be an appropriate script or rewrite rule
267 * in place to handle these URLs.
269 $wgActionPaths = array();
273 /************************************************************************//**
274 * @name Files and file uploads
278 /** Uploads have to be specially set up to be secure */
279 $wgEnableUploads = false;
281 /** Allows to move images and other media files */
282 $wgAllowImageMoving = true;
285 * These are additional characters that should be replaced with '-' in file names
287 $wgIllegalFileChars = ":";
290 * @deprecated use $wgDeletedDirectory
292 $wgFileStore = array();
295 * What directory to place deleted uploads in
297 $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted
300 * Set this to true if you use img_auth and want the user to see details on why access failed.
302 $wgImgAuthDetails = false;
305 * If this is enabled, img_auth.php will not allow image access unless the wiki
306 * is private. This improves security when image uploads are hosted on a
309 $wgImgAuthPublicTest = true;
312 * File repository structures
314 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
315 * an array of such structures. Each repository structure is an associative
316 * array of properties configuring the repository.
318 * Properties required for all repos:
319 * - class The class name for the repository. May come from the core or an extension.
320 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
322 * - name A unique name for the repository.
324 * For most core repos:
325 * - url Base public URL
326 * - hashLevels The number of directory levels for hash-based division of files
327 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
328 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
330 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
331 * determines whether filenames implicitly start with a capital letter.
332 * The current implementation may give incorrect description page links
333 * when the local $wgCapitalLinks and initialCapital are mismatched.
334 * - pathDisclosureProtection
335 * May be 'paranoid' to remove all parameters from error messages, 'none' to
336 * leave the paths in unchanged, or 'simple' to replace paths with
337 * placeholders. Default for LocalRepo is 'simple'.
338 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
340 * - directory The local filesystem directory where public files are stored. Not used for
342 * - thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
343 * - thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
346 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
347 * for local repositories:
348 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
349 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
350 * http://en.wikipedia.org/w
351 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
352 * $wgScriptExtension, e.g. .php5 defaults to .php
354 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
355 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
356 * $wgFetchCommonsDescriptions.
359 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
360 * equivalent to the corresponding member of $wgDBservers
361 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
362 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
365 * - apibase Use for the foreign API's URL
366 * - apiThumbCacheExpiry How long to locally cache thumbs for
368 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
369 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
371 $wgLocalFileRepo = false;
373 /** @see $wgLocalFileRepo */
374 $wgForeignFileRepos = array();
377 * Use Commons as a remote file repository. Essentially a wrapper, when this
378 * is enabled $wgForeignFileRepos will point at Commons with a set of default
381 $wgUseInstantCommons = false;
384 * Show EXIF data, on by default if available.
385 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
387 * NOTE FOR WINDOWS USERS:
388 * To enable EXIF functions, add the folloing lines to the
389 * "Windows extensions" section of php.ini:
391 * extension=extensions/php_mbstring.dll
392 * extension=extensions/php_exif.dll
394 $wgShowEXIF = function_exists( 'exif_read_data' );
397 * If you operate multiple wikis, you can define a shared upload path here.
398 * Uploads to this wiki will NOT be put there - they will be put into
399 * $wgUploadDirectory.
400 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
401 * no file of the given name is found in the local repository (for [[File:..]],
402 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
405 * Note that these configuration settings can now be defined on a per-
406 * repository basis for an arbitrary number of file repositories, using the
407 * $wgForeignFileRepos variable.
409 $wgUseSharedUploads = false;
410 /** Full path on the web server where shared uploads can be found */
411 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
412 /** Fetch commons image description pages and display them on the local wiki? */
413 $wgFetchCommonsDescriptions = false;
414 /** Path on the file system where shared uploads can be found. */
415 $wgSharedUploadDirectory = "/var/www/wiki3/images";
416 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
417 $wgSharedUploadDBname = false;
418 /** Optional table prefix used in database. */
419 $wgSharedUploadDBprefix = '';
420 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
421 $wgCacheSharedUploads = true;
423 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
424 * The timeout for copy uploads is set by $wgHTTPTimeout.
426 $wgAllowCopyUploads = false;
428 * Allow asynchronous copy uploads.
429 * This feature is experimental.
431 $wgAllowAsyncCopyUploads = false;
434 * Max size for uploads, in bytes. Applies to all uploads.
436 $wgMaxUploadSize = 1024*1024*100; # 100MB
439 * Point the upload navigation link to an external URL
440 * Useful if you want to use a shared repository by default
441 * without disabling local uploads (use $wgEnableUploads = false for that)
442 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
444 $wgUploadNavigationUrl = false;
447 * Point the upload link for missing files to an external URL, as with
448 * $wgUploadNavigationUrl. The URL will get (?|&)wpDestFile=<filename>
449 * appended to it as appropriate.
451 $wgUploadMissingFileUrl = false;
454 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
455 * generating them on render and outputting a static URL. This is necessary if some of your
456 * apache servers don't have read/write access to the thumbnail path.
459 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
461 $wgThumbnailScriptPath = false;
462 $wgSharedThumbnailScriptPath = false;
465 * Set this to false if you do not want MediaWiki to divide your images
466 * directory into many subdirectories, for improved performance.
468 * It's almost always good to leave this enabled. In previous versions of
469 * MediaWiki, some users set this to false to allow images to be added to the
470 * wiki by simply copying them into $wgUploadDirectory and then running
471 * maintenance/rebuildImages.php to register them in the database. This is no
472 * longer recommended, use maintenance/importImages.php instead.
474 * Note that this variable may be ignored if $wgLocalFileRepo is set.
476 $wgHashedUploadDirectory = true;
479 * Set the following to false especially if you have a set of files that need to
480 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
483 $wgHashedSharedUploadDirectory = true;
486 * Base URL for a repository wiki. Leave this blank if uploads are just stored
487 * in a shared directory and not meant to be accessible through a separate wiki.
488 * Otherwise the image description pages on the local wiki will link to the
489 * image description page on this wiki.
491 * Please specify the namespace, as in the example below.
493 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
496 * This is the list of preferred extensions for uploading files. Uploading files
497 * with extensions not in this list will trigger a warning.
499 * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
500 * such as odt or doc, and untrusted users are allowed to upload files, then
501 * your wiki will be vulnerable to cross-site request forgery (CSRF).
503 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
505 /** Files with these extensions will never be allowed as uploads. */
506 $wgFileBlacklist = array(
507 # HTML may contain cookie-stealing JavaScript and web bugs
508 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
509 # PHP scripts may execute arbitrary code on the server
510 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
511 # Other types that may be interpreted by some servers
512 'shtml', 'jhtml', 'pl', 'py', 'cgi',
513 # May contain harmful executables for Windows victims
514 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
517 * Files with these mime types will never be allowed as uploads
518 * if $wgVerifyMimeType is enabled.
520 $wgMimeTypeBlacklist = array(
521 # HTML may contain cookie-stealing JavaScript and web bugs
522 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
523 # PHP scripts may execute arbitrary code on the server
524 'application/x-php', 'text/x-php',
525 # Other types that may be interpreted by some servers
526 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
527 # Client-side hazards on Internet Explorer
528 'text/scriptlet', 'application/x-msdownload',
529 # Windows metafile, client-side vulnerability on some systems
530 'application/x-msmetafile',
531 # A ZIP file may be a valid Java archive containing an applet which exploits the
532 # same-origin policy to steal cookies
534 # MS Office OpenXML and other Open Package Conventions files are zip files
535 # and thus blacklisted just as other zip files
536 'application/x-opc+zip',
540 * This is a flag to determine whether or not to check file extensions on upload.
542 * WARNING: setting this to false is insecure for public wikis.
544 $wgCheckFileExtensions = true;
547 * If this is turned off, users may override the warning for files not covered
548 * by $wgFileExtensions.
550 * WARNING: setting this to false is insecure for public wikis.
552 $wgStrictFileExtensions = true;
554 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
555 $wgUploadSizeWarning = false;
558 * list of trusted media-types and mime types.
559 * Use the MEDIATYPE_xxx constants to represent media types.
560 * This list is used by File::isSafeFile
562 * Types not listed here will have a warning about unsafe content
563 * displayed on the images description page. It would also be possible
564 * to use this for further restrictions, like disabling direct
565 * [[media:...]] links for non-trusted formats.
567 $wgTrustedMediaFormats = array(
568 MEDIATYPE_BITMAP
, //all bitmap formats
569 MEDIATYPE_AUDIO
, //all audio formats
570 MEDIATYPE_VIDEO
, //all plain video formats
571 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
572 "application/pdf", //PDF files
573 #"application/x-shockwave-flash", //flash/shockwave movie
577 * Plugins for media file type handling.
578 * Each entry in the array maps a MIME type to a class name
580 $wgMediaHandlers = array(
581 'image/jpeg' => 'BitmapHandler',
582 'image/png' => 'PNGHandler',
583 'image/gif' => 'GIFHandler',
584 'image/tiff' => 'TiffHandler',
585 'image/x-ms-bmp' => 'BmpHandler',
586 'image/x-bmp' => 'BmpHandler',
587 'image/svg+xml' => 'SvgHandler', // official
588 'image/svg' => 'SvgHandler', // compat
589 'image/vnd.djvu' => 'DjVuHandler', // official
590 'image/x.djvu' => 'DjVuHandler', // compat
591 'image/x-djvu' => 'DjVuHandler', // compat
595 * Resizing can be done using PHP's internal image libraries or using
596 * ImageMagick or another third-party converter, e.g. GraphicMagick.
597 * These support more file formats than PHP, which only supports PNG,
598 * GIF, JPG, XBM and WBMP.
600 * Use Image Magick instead of PHP builtin functions.
602 $wgUseImageMagick = false;
603 /** The convert command shipped with ImageMagick */
604 $wgImageMagickConvertCommand = '/usr/bin/convert';
606 /** Sharpening parameter to ImageMagick */
607 $wgSharpenParameter = '0x0.4';
609 /** Reduction in linear dimensions below which sharpening will be enabled */
610 $wgSharpenReductionThreshold = 0.85;
613 * Temporary directory used for ImageMagick. The directory must exist. Leave
614 * this set to false to let ImageMagick decide for itself.
616 $wgImageMagickTempDir = false;
619 * Use another resizing converter, e.g. GraphicMagick
620 * %s will be replaced with the source path, %d with the destination
621 * %w and %h will be replaced with the width and height.
623 * Example for GraphicMagick:
625 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
628 * Leave as false to skip this.
630 $wgCustomConvertCommand = false;
633 * Scalable Vector Graphics (SVG) may be uploaded as images.
634 * Since SVG support is not yet standard in browsers, it is
635 * necessary to rasterize SVGs to PNG as a fallback format.
637 * An external program is required to perform this conversion.
639 $wgSVGConverters = array(
640 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
641 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
642 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
643 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
644 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
645 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
647 /** Pick a converter defined in $wgSVGConverters */
648 $wgSVGConverter = 'ImageMagick';
649 /** If not in the executable PATH, specify the SVG converter path. */
650 $wgSVGConverterPath = '';
651 /** Don't scale a SVG larger than this */
652 $wgSVGMaxSize = 2048;
655 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
656 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
657 * crap files as images. When this directive is on, <title> will be allowed in files with
658 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
659 * and doesn't send appropriate MIME types for SVG images.
661 $wgAllowTitlesInSVG = false;
664 * Don't thumbnail an image if it will use too much working memory.
665 * Default is 50 MB if decompressed to RGBA form, which corresponds to
666 * 12.5 million pixels or 3500x3500
668 $wgMaxImageArea = 1.25e7
;
670 * Force thumbnailing of animated GIFs above this size to a single
671 * frame instead of an animated thumbnail. As of MW 1.17 this limit
672 * is checked against the total size of all frames in the animation.
673 * It probably makes sense to keep this equal to $wgMaxImageArea.
675 $wgMaxAnimatedGifArea = 1.25e7
;
677 * Browsers don't support TIFF inline generally...
678 * For inline display, we need to convert to PNG or JPEG.
679 * Note scaling should work with ImageMagick, but may not with GD scaling.
683 * // PNG is lossless, but inefficient for photos
684 * $wgTiffThumbnailType = array( 'png', 'image/png' );
685 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
686 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
689 $wgTiffThumbnailType = false;
692 * If rendered thumbnail files are older than this timestamp, they
693 * will be rerendered on demand as if the file didn't already exist.
694 * Update if there is some need to force thumbs and SVG rasterizations
695 * to rerender, such as fixes to rendering bugs.
697 $wgThumbnailEpoch = '20030516000000';
700 * If set, inline scaled images will still produce <img> tags ready for
701 * output instead of showing an error message.
703 * This may be useful if errors are transitory, especially if the site
704 * is configured to automatically render thumbnails on request.
706 * On the other hand, it may obscure error conditions from debugging.
707 * Enable the debug log or the 'thumbnail' log group to make sure errors
708 * are logged to a file for review.
710 $wgIgnoreImageErrors = false;
713 * Allow thumbnail rendering on page view. If this is false, a valid
714 * thumbnail URL is still output, but no file will be created at
715 * the target location. This may save some time if you have a
716 * thumb.php or 404 handler set up which is faster than the regular
719 $wgGenerateThumbnailOnParse = true;
722 * Show thumbnails for old images on the image description page
724 $wgShowArchiveThumbnails = true;
726 /** Obsolete, always true, kept for compatibility with extensions */
727 $wgUseImageResize = true;
731 * Internal name of virus scanner. This servers as a key to the
732 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
733 * null, every file uploaded will be scanned for viruses.
738 * Configuration for different virus scanners. This an associative array of
739 * associative arrays. It contains one setup array per known scanner type.
740 * The entry is selected by $wgAntivirus, i.e.
741 * valid values for $wgAntivirus are the keys defined in this array.
743 * The configuration array for each scanner contains the following keys:
744 * "command", "codemap", "messagepattern":
746 * "command" is the full command to call the virus scanner - %f will be
747 * replaced with the name of the file to scan. If not present, the filename
748 * will be appended to the command. Note that this must be overwritten if the
749 * scanner is not in the system path; in that case, plase set
750 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
753 * "codemap" is a mapping of exit code to return codes of the detectVirus
754 * function in SpecialUpload.
755 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
756 * the scan to be failed. This will pass the file if $wgAntivirusRequired
758 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
759 * the file to have an usupported format, which is probably imune to
760 * virusses. This causes the file to pass.
761 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
762 * no virus was found.
763 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
765 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
767 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
768 * output. The relevant part should be matched as group one (\1).
769 * If not defined or the pattern does not match, the full message is shown to the user.
771 $wgAntivirusSetup = array(
775 'command' => "clamscan --no-summary ",
778 "0" => AV_NO_VIRUS
, # no virus
779 "1" => AV_VIRUS_FOUND
, # virus found
780 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
781 "*" => AV_SCAN_FAILED
, # else scan failed
784 'messagepattern' => '/.*?:(.*)/sim',
789 'command' => "f-prot ",
792 "0" => AV_NO_VIRUS
, # no virus
793 "3" => AV_VIRUS_FOUND
, # virus found
794 "6" => AV_VIRUS_FOUND
, # virus found
795 "*" => AV_SCAN_FAILED
, # else scan failed
798 'messagepattern' => '/.*?Infection:(.*)$/m',
803 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
804 $wgAntivirusRequired = true;
806 /** Determines if the mime type of uploaded files should be checked */
807 $wgVerifyMimeType = true;
809 /** Sets the mime type definition file to use by MimeMagic.php. */
810 $wgMimeTypeFile = "includes/mime.types";
811 #$wgMimeTypeFile= "/etc/mime.types";
812 #$wgMimeTypeFile= null; #use built-in defaults only.
814 /** Sets the mime type info file to use by MimeMagic.php. */
815 $wgMimeInfoFile= "includes/mime.info";
816 #$wgMimeInfoFile= null; #use built-in defaults only.
819 * Switch for loading the FileInfo extension by PECL at runtime.
820 * This should be used only if fileinfo is installed as a shared object
821 * or a dynamic library.
823 $wgLoadFileinfoExtension = false;
825 /** Sets an external mime detector program. The command must print only
826 * the mime type to standard output.
827 * The name of the file to process will be appended to the command given here.
828 * If not set or NULL, mime_content_type will be used if available.
831 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
834 $wgMimeDetectorCommand = null;
837 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
838 * things, because only a few types of images are needed and file extensions
841 $wgTrivialMimeDetection = false;
844 * Additional XML types we can allow via mime-detection.
845 * array = ( 'rootElement' => 'associatedMimeType' )
847 $wgXMLMimeTypes = array(
848 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
849 'svg' => 'image/svg+xml',
850 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
851 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
852 'html' => 'text/html', // application/xhtml+xml?
856 * Limit images on image description pages to a user-selectable limit. In order
857 * to reduce disk usage, limits can only be selected from a list.
858 * The user preference is saved as an array offset in the database, by default
859 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
860 * change it if you alter the array (see bug 8858).
861 * This is the list of settings the user can choose from:
863 $wgImageLimits = array (
869 array(10000,10000) );
872 * Adjust thumbnails on image pages according to a user setting. In order to
873 * reduce disk usage, the values can only be selected from a list. This is the
874 * list of settings the user can choose from:
876 $wgThumbLimits = array(
886 * Default parameters for the <gallery> tag
888 $wgGalleryOptions = array (
889 'imagesPerRow' => 4, // Default number of images per-row in the gallery
890 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
891 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
892 'captionLength' => 20, // Length of caption to truncate (in characters)
893 'showBytes' => true, // Show the filesize in bytes in categories
897 * Adjust width of upright images when parameter 'upright' is used
898 * This allows a nicer look for upright images without the need to fix the width
899 * by hardcoded px in wiki sourcecode.
901 $wgThumbUpright = 0.75;
904 * Default value for chmoding of new directories.
906 $wgDirectoryMode = 0777;
910 * Path of the djvudump executable
911 * Enable this and $wgDjvuRenderer to enable djvu rendering
913 # $wgDjvuDump = 'djvudump';
917 * Path of the ddjvu DJVU renderer
918 * Enable this and $wgDjvuDump to enable djvu rendering
920 # $wgDjvuRenderer = 'ddjvu';
921 $wgDjvuRenderer = null;
924 * Path of the djvutxt DJVU text extraction utility
925 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
927 # $wgDjvuTxt = 'djvutxt';
931 * Path of the djvutoxml executable
932 * This works like djvudump except much, much slower as of version 3.5.
934 * For now I recommend you use djvudump instead. The djvuxml output is
935 * probably more stable, so we'll switch back to it as soon as they fix
936 * the efficiency problem.
937 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
939 # $wgDjvuToXML = 'djvutoxml';
944 * Shell command for the DJVU post processor
945 * Default: pnmtopng, since ddjvu generates ppm output
946 * Set this to false to output the ppm file directly.
948 $wgDjvuPostProcessor = 'pnmtojpeg';
950 * File extension for the DJVU post processor output
952 $wgDjvuOutputExtension = 'jpg';
954 /** @} */ # end of file uploads }
956 /************************************************************************//**
957 * @name Email settings
962 * Site admin email address.
964 $wgEmergencyContact = 'wikiadmin@' . $serverName;
967 * Password reminder email address.
969 * The address we should use as sender when a user is requesting his password.
971 $wgPasswordSender = 'apache@' . $serverName;
973 unset( $serverName ); # Don't leak local variables to global scope
976 * Password reminder name
978 $wgPasswordSenderName = 'MediaWiki Mail';
981 * Dummy address which should be accepted during mail send action.
982 * It might be necessary to adapt the address or to set it equal
983 * to the $wgEmergencyContact address.
985 $wgNoReplyAddress = 'reply@not.possible';
988 * Set to true to enable the e-mail basic features:
989 * Password reminders, etc. If sending e-mail on your
990 * server doesn't work, you might want to disable this.
992 $wgEnableEmail = true;
995 * Set to true to enable user-to-user e-mail.
996 * This can potentially be abused, as it's hard to track.
998 $wgEnableUserEmail = true;
1001 * Set to true to put the sending user's email in a Reply-To header
1002 * instead of From. ($wgEmergencyContact will be used as From.)
1004 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1005 * which can cause problems with SPF validation and leak recipient addressses
1006 * when bounces are sent to the sender.
1008 $wgUserEmailUseReplyTo = false;
1011 * Minimum time, in hours, which must elapse between password reminder
1012 * emails for a given account. This is to prevent abuse by mail flooding.
1014 $wgPasswordReminderResendTime = 24;
1017 * The time, in seconds, when an emailed temporary password expires.
1019 $wgNewPasswordExpiry = 3600 * 24 * 7;
1023 * For using a direct (authenticated) SMTP server connection.
1024 * Default to false or fill an array :
1026 * "host" => 'SMTP domain',
1027 * "IDHost" => 'domain for MessageID',
1029 * "auth" => true/false,
1030 * "username" => user,
1031 * "password" => password
1037 * Additional email parameters, will be passed as the last argument to mail() call.
1039 $wgAdditionalMailParams = null;
1042 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1043 * from $wgEmergencyContact
1045 $wgEnotifFromEditor = false;
1047 // TODO move UPO to preferences probably ?
1048 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1049 # If set to false, the corresponding input form on the user preference page is suppressed
1050 # It call this to be a "user-preferences-option (UPO)"
1053 * Require email authentication before sending mail to an email addres. This is
1054 * highly recommended. It prevents MediaWiki from being used as an open spam
1057 $wgEmailAuthentication = true;
1060 * Allow users to enable email notification ("enotif") on watchlist changes.
1062 $wgEnotifWatchlist = false;
1065 * Allow users to enable email notification ("enotif") when someone edits their
1068 $wgEnotifUserTalk = false;
1071 * Set the Reply-to address in notifications to the editor's address, if user
1072 * allowed this in the preferences.
1074 $wgEnotifRevealEditorAddress = false;
1077 * Send notification mails on minor edits to watchlist pages. This is enabled
1078 * by default. Does not affect user talk notifications.
1080 $wgEnotifMinorEdits = true;
1083 * Send a generic mail instead of a personalised mail for each user. This
1084 * always uses UTC as the time zone, and doesn't include the username.
1086 * For pages with many users watching, this can significantly reduce mail load.
1087 * Has no effect when using sendmail rather than SMTP.
1089 $wgEnotifImpersonal = false;
1092 * Maximum number of users to mail at once when using impersonal mail. Should
1093 * match the limit on your mail server.
1095 $wgEnotifMaxRecips = 500;
1098 * Send mails via the job queue. This can be useful to reduce the time it
1099 * takes to save a page that a lot of people are watching.
1101 $wgEnotifUseJobQ = false;
1104 * Use real name instead of username in e-mail "from" field.
1106 $wgEnotifUseRealName = false;
1109 * Array of usernames who will be sent a notification email for every change
1110 * which occurs on a wiki.
1112 $wgUsersNotifiedOnAllChanges = array();
1115 /** @} */ # end of email settings
1117 /************************************************************************//**
1118 * @name Database settings
1121 /** Database host name or IP address */
1122 $wgDBserver = 'localhost';
1123 /** Database port number (for PostgreSQL) */
1125 /** Name of the database */
1126 $wgDBname = 'my_wiki';
1127 /** Database username */
1128 $wgDBuser = 'wikiuser';
1129 /** Database user's password */
1131 /** Database type */
1132 $wgDBtype = 'mysql';
1134 /** Separate username for maintenance tasks. Leave as null to use the default. */
1135 $wgDBadminuser = null;
1136 /** Separate password for maintenance tasks. Leave as null to use the default. */
1137 $wgDBadminpassword = null;
1141 * Leave as null to select the default search engine for the
1142 * selected database type (eg SearchMySQL), or set to a class
1143 * name to override to a custom search engine.
1145 $wgSearchType = null;
1147 /** Table name prefix */
1149 /** MySQL table options to use during installation or update */
1150 $wgDBTableOptions = 'ENGINE=InnoDB';
1153 * SQL Mode - default is turning off all modes, including strict, if set.
1154 * null can be used to skip the setting for performance reasons and assume
1155 * DBA has done his best job.
1156 * String override can be used for some additional fun :-)
1160 /** Mediawiki schema */
1161 $wgDBmwschema = 'mediawiki';
1162 /** Tsearch2 schema */
1163 $wgDBts2schema = 'public';
1165 /** To override default SQLite data directory ($docroot/../data) */
1166 $wgSQLiteDataDir = '';
1169 * Make all database connections secretly go to localhost. Fool the load balancer
1170 * thinking there is an arbitrarily large cluster of servers to connect to.
1171 * Useful for debugging.
1173 $wgAllDBsAreLocalhost = false;
1176 * Shared database for multiple wikis. Commonly used for storing a user table
1177 * for single sign-on. The server for this database must be the same as for the
1180 * For backwards compatibility the shared prefix is set to the same as the local
1181 * prefix, and the user table is listed in the default list of shared tables.
1182 * The user_properties table is also added so that users will continue to have their
1183 * preferences shared (preferences were stored in the user table prior to 1.16)
1185 * $wgSharedTables may be customized with a list of tables to share in the shared
1186 * datbase. However it is advised to limit what tables you do share as many of
1187 * MediaWiki's tables may have side effects if you try to share them.
1190 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1195 /** @see $wgSharedDB */
1196 $wgSharedPrefix = false;
1197 /** @see $wgSharedDB */
1198 $wgSharedTables = array( 'user', 'user_properties' );
1201 * Database load balancer
1202 * This is a two-dimensional array, an array of server info structures
1205 * - dbname: Default database name
1207 * - password: DB password
1208 * - type: "mysql" or "postgres"
1209 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1210 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1211 * to several groups, the most specific group defined here is used.
1213 * - flags: bit field
1214 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1215 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1216 * - DBO_TRX -- wrap entire request in a transaction
1217 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1218 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1220 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1221 * - max threads: (optional) Maximum number of running threads
1223 * These and any other user-defined properties will be assigned to the mLBInfo member
1224 * variable of the Database object.
1226 * Leave at false to use the single-server variables above. If you set this
1227 * variable, the single-server variables will generally be ignored (except
1228 * perhaps in some command-line scripts).
1230 * The first server listed in this array (with key 0) will be the master. The
1231 * rest of the servers will be slaves. To prevent writes to your slaves due to
1232 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1233 * slaves in my.cnf. You can set read_only mode at runtime using:
1236 * SET @@read_only=1;
1239 * Since the effect of writing to a slave is so damaging and difficult to clean
1240 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1241 * our masters, and then set read_only=0 on masters at runtime.
1243 $wgDBservers = false;
1246 * Load balancer factory configuration
1247 * To set up a multi-master wiki farm, set the class here to something that
1248 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1249 * The class identified here is responsible for reading $wgDBservers,
1250 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1252 * The LBFactory_Multi class is provided for this purpose, please see
1253 * includes/db/LBFactory_Multi.php for configuration information.
1255 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1257 /** How long to wait for a slave to catch up to the master */
1258 $wgMasterWaitTimeout = 10;
1260 /** File to log database errors to */
1261 $wgDBerrorLog = false;
1263 /** When to give an error message */
1264 $wgDBClusterTimeout = 10;
1267 * Scale load balancer polling time so that under overload conditions, the database server
1268 * receives a SHOW STATUS query at an average interval of this many microseconds
1270 $wgDBAvgStatusPoll = 2000;
1272 /** Set to true if using InnoDB tables */
1273 $wgDBtransactions = false;
1274 /** Set to true for compatibility with extensions that might be checking.
1275 * MySQL 3.23.x is no longer supported. */
1279 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1280 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1282 * WARNING: THIS IS EXPERIMENTAL!
1284 * May break if you're not using the table defs from mysql5/tables.sql.
1285 * May break if you're upgrading an existing wiki if set differently.
1286 * Broken symptoms likely to include incorrect behavior with page titles,
1287 * usernames, comments etc containing non-ASCII characters.
1288 * Might also cause failures on the object cache and other things.
1290 * Even correct usage may cause failures with Unicode supplementary
1291 * characters (those not in the Basic Multilingual Plane) unless MySQL
1292 * has enhanced their Unicode support.
1294 $wgDBmysql5 = false;
1297 * Other wikis on this site, can be administered from a single developer
1299 * Array numeric key => database name
1301 $wgLocalDatabases = array();
1304 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1305 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1306 * show a more obvious warning.
1308 $wgSlaveLagWarning = 10;
1309 /** @see $wgSlaveLagWarning */
1310 $wgSlaveLagCritical = 30;
1313 * Use old names for change_tags indices.
1315 $wgOldChangeTagsIndex = false;
1317 /**@}*/ # End of DB settings }
1320 /************************************************************************//**
1321 * @name Text storage
1326 * We can also compress text stored in the 'text' table. If this is set on, new
1327 * revisions will be compressed on page save if zlib support is available. Any
1328 * compressed revisions will be decompressed on load regardless of this setting
1329 * *but will not be readable at all* if zlib support is not available.
1331 $wgCompressRevisions = false;
1334 * External stores allow including content
1335 * from non database sources following URL links
1337 * Short names of ExternalStore classes may be specified in an array here:
1338 * $wgExternalStores = array("http","file","custom")...
1340 * CAUTION: Access to database might lead to code execution
1342 $wgExternalStores = false;
1345 * An array of external mysql servers, e.g.
1346 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
1347 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
1349 $wgExternalServers = array();
1352 * The place to put new revisions, false to put them in the local text table.
1353 * Part of a URL, e.g. DB://cluster1
1355 * Can be an array instead of a single string, to enable data distribution. Keys
1356 * must be consecutive integers, starting at zero. Example:
1358 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1361 $wgDefaultExternalStore = false;
1364 * Revision text may be cached in $wgMemc to reduce load on external storage
1365 * servers and object extraction overhead for frequently-loaded revisions.
1367 * Set to 0 to disable, or number of seconds before cache expiry.
1369 $wgRevisionCacheExpiry = 0;
1371 /** @} */ # end text storage }
1373 /************************************************************************//**
1374 * @name Performance hacks and limits
1377 /** Disable database-intensive features */
1378 $wgMiserMode = false;
1379 /** Disable all query pages if miser mode is on, not just some */
1380 $wgDisableQueryPages = false;
1381 /** Number of rows to cache in 'querycache' table when miser mode is on */
1382 $wgQueryCacheLimit = 1000;
1383 /** Number of links to a page required before it is deemed "wanted" */
1384 $wgWantedPagesThreshold = 1;
1385 /** Enable slow parser functions */
1386 $wgAllowSlowParserFunctions = false;
1389 * Do DELETE/INSERT for link updates instead of incremental
1391 $wgUseDumbLinkUpdate = false;
1394 * Anti-lock flags - bitfield
1395 * - ALF_PRELOAD_LINKS:
1396 * Preload links during link update for save
1397 * - ALF_PRELOAD_EXISTENCE:
1398 * Preload cur_id during replaceLinkHolders
1399 * - ALF_NO_LINK_LOCK:
1400 * Don't use locking reads when updating the link table. This is
1401 * necessary for wikis with a high edit rate for performance
1402 * reasons, but may cause link table inconsistency
1403 * - ALF_NO_BLOCK_LOCK:
1404 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1407 $wgAntiLockFlags = 0;
1410 * Maximum article size in kilobytes
1412 $wgMaxArticleSize = 2048;
1415 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1416 * raise PHP's memory limit if it's below this amount.
1418 $wgMemoryLimit = "50M";
1420 /** @} */ # end performance hacks }
1422 /************************************************************************//**
1423 * @name Cache settings
1428 * Directory for caching data in the local filesystem. Should not be accessible
1429 * from the web. Set this to false to not use any local caches.
1431 * Note: if multiple wikis share the same localisation cache directory, they
1432 * must all have the same set of extensions. You can set a directory just for
1433 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1435 $wgCacheDirectory = false;
1438 * Main cache type. This should be a cache with fast access, but it may have
1439 * limited space. By default, it is disabled, since the database is not fast
1440 * enough to make it worthwhile.
1444 * - CACHE_ANYTHING: Use anything, as long as it works
1445 * - CACHE_NONE: Do not cache
1446 * - CACHE_DB: Store cache objects in the DB
1447 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
1448 * - CACHE_ACCEL: eAccelerator, APC, XCache or WinCache
1449 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1450 * database. This is slow, and is not recommended for
1451 * anything other than debugging.
1453 * @see $wgMessageCacheType, $wgParserCacheType
1455 $wgMainCacheType = CACHE_NONE
;
1458 * The cache type for storing the contents of the MediaWiki namespace. This
1459 * cache is used for a small amount of data which is expensive to regenerate.
1461 * For available types see $wgMainCacheType.
1463 $wgMessageCacheType = CACHE_ANYTHING
;
1466 * The cache type for storing article HTML. This is used to store data which
1467 * is expensive to regenerate, and benefits from having plenty of storage space.
1469 * For available types see $wgMainCacheType.
1471 $wgParserCacheType = CACHE_ANYTHING
;
1474 * The expiry time for the parser cache, in seconds. The default is 86.4k
1475 * seconds, otherwise known as a day.
1477 $wgParserCacheExpireTime = 86400;
1480 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
1482 $wgDBAhandler = 'db3';
1485 * Store sessions in MemCached. This can be useful to improve performance, or to
1486 * avoid the locking behaviour of PHP's default session handler, which tends to
1487 * prevent multiple requests for the same user from acting concurrently.
1489 $wgSessionsInMemcached = false;
1492 * This is used for setting php's session.save_handler. In practice, you will
1493 * almost never need to change this ever. Other options might be 'user' or
1494 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1495 * useful if you're doing cross-application sessions, see bug 11381)
1497 $wgSessionHandler = 'files';
1499 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1500 $wgMemCachedDebug = false;
1502 /** The list of MemCached servers and port numbers */
1503 $wgMemCachedServers = array( '127.0.0.1:11000' );
1506 * Use persistent connections to MemCached, which are shared across multiple
1509 $wgMemCachedPersistent = false;
1512 * Read/write timeout for MemCached server communication, in microseconds.
1514 $wgMemCachedTimeout = 100000;
1517 * Set this to true to make a local copy of the message cache, for use in
1518 * addition to memcached. The files will be put in $wgCacheDirectory.
1520 $wgUseLocalMessageCache = false;
1523 * Defines format of local cache
1524 * true - Serialized object
1525 * false - PHP source file (Warning - security risk)
1527 $wgLocalMessageCacheSerialized = true;
1530 * Instead of caching everything, keep track which messages are requested and
1531 * load only most used messages. This only makes sense if there is lots of
1532 * interface messages customised in the wiki (like hundreds in many languages).
1534 $wgAdaptiveMessageCache = false;
1537 * Localisation cache configuration. Associative array with keys:
1538 * class: The class to use. May be overridden by extensions.
1540 * store: The location to store cache data. May be 'files', 'db' or
1541 * 'detect'. If set to "files", data will be in CDB files. If set
1542 * to "db", data will be stored to the database. If set to
1543 * "detect", files will be used if $wgCacheDirectory is set,
1544 * otherwise the database will be used.
1546 * storeClass: The class name for the underlying storage. If set to a class
1547 * name, it overrides the "store" setting.
1549 * storeDirectory: If the store class puts its data in files, this is the
1550 * directory it will use. If this is false, $wgCacheDirectory
1553 * manualRecache: Set this to true to disable cache updates on web requests.
1554 * Use maintenance/rebuildLocalisationCache.php instead.
1556 $wgLocalisationCacheConf = array(
1557 'class' => 'LocalisationCache',
1558 'store' => 'detect',
1559 'storeClass' => false,
1560 'storeDirectory' => false,
1561 'manualRecache' => false,
1564 /** Allow client-side caching of pages */
1565 $wgCachePages = true;
1568 * Set this to current time to invalidate all prior cached pages. Affects both
1569 * client- and server-side caching.
1570 * You can get the current date on your server by using the command:
1571 * date +%Y%m%d%H%M%S
1573 $wgCacheEpoch = '20030516000000';
1576 * Bump this number when changing the global style sheets and JavaScript.
1577 * It should be appended in the query string of static CSS and JS includes,
1578 * to ensure that client-side caches do not keep obsolete copies of global
1581 $wgStyleVersion = '301';
1584 * This will cache static pages for non-logged-in users to reduce
1585 * database traffic on public sites.
1586 * Must set $wgShowIPinHeader = false
1588 $wgUseFileCache = false;
1591 * Directory where the cached page will be saved.
1592 * Defaults to "$wgCacheDirectory/html".
1594 $wgFileCacheDirectory = false;
1597 * Keep parsed pages in a cache (objectcache table or memcached)
1598 * to speed up output of the same page viewed by another user with the
1601 * This can provide a significant speedup for medium to large pages,
1602 * so you probably want to keep it on. Extensions that conflict with the
1603 * parser cache should disable the cache on a per-page basis instead.
1605 $wgEnableParserCache = true;
1608 * Append a configured value to the parser cache and the sitenotice key so
1609 * that they can be kept separate for some class of activity.
1611 $wgRenderHashAppend = '';
1614 * If on, the sidebar navigation links are cached for users with the
1615 * current language set. This can save a touch of load on a busy site
1616 * by shaving off extra message lookups.
1618 * However it is also fragile: changing the site configuration, or
1619 * having a variable $wgArticlePath, can produce broken links that
1620 * don't update as expected.
1622 $wgEnableSidebarCache = false;
1625 * Expiry time for the sidebar cache, in seconds
1627 $wgSidebarCacheExpiry = 86400;
1630 * When using the file cache, we can store the cached HTML gzipped to save disk
1631 * space. Pages will then also be served compressed to clients that support it.
1632 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1633 * the default LocalSettings.php! If you enable this, remove that setting first.
1635 * Requires zlib support enabled in PHP.
1640 * Whether MediaWiki should send an ETag header. Seems to cause
1641 * broken behavior with Squid 2.6, see bug 7098.
1645 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1646 * problems when the user requests two pages within a short period of time. This
1647 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1650 $wgClockSkewFudge = 5;
1652 /** @} */ # end of cache settings
1654 /************************************************************************//**
1655 * @name HTTP proxy (Squid) settings
1657 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
1658 * although they are referred to as Squid settings for historical reasons.
1660 * Achieving a high hit ratio with an HTTP proxy requires special
1661 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
1668 * Enable/disable Squid.
1669 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
1671 $wgUseSquid = false;
1673 /** If you run Squid3 with ESI support, enable this (default:false): */
1676 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1680 * Internal server name as known to Squid, if different. Example:
1682 * $wgInternalServer = 'http://yourinternal.tld:8000';
1685 $wgInternalServer = $wgServer;
1688 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1689 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1690 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1693 $wgSquidMaxage = 18000;
1696 * Default maximum age for raw CSS/JS accesses
1698 $wgForcedRawSMaxage = 300;
1701 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1703 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1704 * headers sent/modified from these proxies when obtaining the remote IP address
1706 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1708 $wgSquidServers = array();
1711 * As above, except these servers aren't purged on page changes; use to set a
1712 * list of trusted proxies, etc.
1714 $wgSquidServersNoPurge = array();
1716 /** Maximum number of titles to purge in any one client operation */
1717 $wgMaxSquidPurgeTitles = 400;
1720 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
1722 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
1723 * present in the earliest Squid implementations of the protocol.
1725 $wgHTCPMulticastAddress = false;
1728 * HTCP multicast port.
1729 * @see $wgHTCPMulticastAddress
1734 * HTCP multicast TTL.
1735 * @see $wgHTCPMulticastAddress
1737 $wgHTCPMulticastTTL = 1;
1739 /** Should forwarded Private IPs be accepted? */
1740 $wgUsePrivateIPs = false;
1742 /** @} */ # end of HTTP proxy settings
1744 /************************************************************************//**
1745 * @name Language, regional and character encoding settings
1749 /** Site language code, should be one of ./languages/Language(.*).php */
1750 $wgLanguageCode = 'en';
1753 * Some languages need different word forms, usually for different cases.
1754 * Used in Language::convertGrammar(). Example:
1757 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
1760 $wgGrammarForms = array();
1762 /** Treat language links as magic connectors, not inline links */
1763 $wgInterwikiMagic = true;
1765 /** Hide interlanguage links from the sidebar */
1766 $wgHideInterlanguageLinks = false;
1768 /** List of language names or overrides for default names in Names.php */
1769 $wgExtraLanguageNames = array();
1772 * List of language codes that don't correspond to an actual language.
1773 * These codes are leftoffs from renames, or other legacy things.
1774 * Also, qqq is a dummy "language" for documenting messages.
1776 $wgDummyLanguageCodes = array(
1789 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1790 $wgInputEncoding = 'UTF-8';
1791 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1792 $wgOutputEncoding = 'UTF-8';
1795 * Character set for use in the article edit box. Language-specific encodings
1798 * This historic feature is one of the first that was added by former MediaWiki
1799 * team leader Brion Vibber, and is used to support the Esperanto x-system.
1801 $wgEditEncoding = '';
1804 * Set this to true to replace Arabic presentation forms with their standard
1805 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
1808 * Note that pages with titles containing presentation forms will become
1809 * inaccessible, run maintenance/cleanupTitles.php to fix this.
1811 $wgFixArabicUnicode = true;
1814 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
1815 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
1816 * set to "ml". Note that some clients (even new clients as of 2010) do not
1817 * support these characters.
1819 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
1820 * fix any ZWJ sequences in existing page titles.
1822 $wgFixMalayalamUnicode = true;
1825 * Set this to always convert certain Unicode sequences to modern ones
1826 * regardless of the content language. This has a small performance
1829 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
1834 $wgAllUnicodeFixes = false;
1837 * Set this to eg 'ISO-8859-1' to perform character set conversion when
1838 * loading old revisions not marked with "utf-8" flag. Use this when
1839 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
1840 * burdensome mass conversion of old text data.
1842 * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
1843 * user names, etc still must be converted en masse in the database before
1844 * continuing as a UTF-8 wiki.
1846 $wgLegacyEncoding = false;
1849 * Browser Blacklist for unicode non compliant browsers. Contains a list of
1850 * regexps : "/regexp/" matching problematic browsers. These browsers will
1851 * be served encoded unicode in the edit box instead of real unicode.
1853 $wgBrowserBlackList = array(
1855 * Netscape 2-4 detection
1856 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
1857 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
1858 * with a negative assertion. The [UIN] identifier specifies the level of security
1859 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
1860 * The language string is unreliable, it is missing on NS4 Mac.
1862 * Reference: http://www.psychedelix.com/agents/index.shtml
1864 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1865 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1866 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1869 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
1872 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
1873 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
1874 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
1877 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
1878 * @link http://en.wikipedia.org/wiki/Template%3AOS9
1880 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1883 * Google wireless transcoder, seems to eat a lot of chars alive
1884 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
1886 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
1890 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
1891 * create stub reference rows in the text table instead of copying
1892 * the full text of all current entries from 'cur' to 'text'.
1894 * This will speed up the conversion step for large sites, but
1895 * requires that the cur table be kept around for those revisions
1896 * to remain viewable.
1898 * maintenance/migrateCurStubs.php can be used to complete the
1899 * migration in the background once the wiki is back online.
1901 * This option affects the updaters *only*. Any present cur stub
1902 * revisions will be readable at runtime regardless of this setting.
1904 $wgLegacySchemaConversion = false;
1907 * Enable to allow rewriting dates in page text.
1908 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
1910 $wgUseDynamicDates = false;
1912 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
1913 * the interface is set to English.
1915 $wgAmericanDates = false;
1917 * For Hindi and Arabic use local numerals instead of Western style (0-9)
1918 * numerals in interface.
1920 $wgTranslateNumerals = true;
1923 * Translation using MediaWiki: namespace.
1924 * Interface messages will be loaded from the database.
1926 $wgUseDatabaseMessages = true;
1929 * Expiry time for the message cache key
1931 $wgMsgCacheExpiry = 86400;
1934 * Maximum entry size in the message cache, in bytes
1936 $wgMaxMsgCacheEntrySize = 10000;
1938 /** Whether to enable language variant conversion. */
1939 $wgDisableLangConversion = false;
1941 /** Whether to enable language variant conversion for links. */
1942 $wgDisableTitleConversion = false;
1944 /** Whether to enable cononical language links in meta data. */
1945 $wgCanonicalLanguageLinks = true;
1947 /** Default variant code, if false, the default will be the language code */
1948 $wgDefaultLanguageVariant = false;
1951 * Disabled variants array of language variant conversion. Example:
1953 * $wgDisabledVariants[] = 'zh-mo';
1954 * $wgDisabledVariants[] = 'zh-my';
1960 * $wgDisabledVariants = array('zh-mo', 'zh-my');
1963 $wgDisabledVariants = array();
1966 * Like $wgArticlePath, but on multi-variant wikis, this provides a
1967 * path format that describes which parts of the URL contain the
1968 * language variant. For Example:
1970 * $wgLanguageCode = 'sr';
1971 * $wgVariantArticlePath = '/$2/$1';
1972 * $wgArticlePath = '/wiki/$1';
1974 * A link to /wiki/ would be redirected to /sr/Главна_страна
1976 * It is important that $wgArticlePath not overlap with possible values
1977 * of $wgVariantArticlePath.
1979 $wgVariantArticlePath = false;
1982 * Show a bar of language selection links in the user login and user
1983 * registration forms; edit the "loginlanguagelinks" message to
1986 $wgLoginLanguageSelector = false;
1989 * When translating messages with wfMsg(), it is not always clear what should
1990 * be considered UI messages and what should be content messages.
1992 * For example, for the English Wikipedia, there should be only one 'mainpage',
1993 * so when getting the link for 'mainpage', we should treat it as site content
1994 * and call wfMsgForContent(), but for rendering the text of the link, we call
1995 * wfMsg(). The code behaves this way by default. However, sites like the
1996 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
1997 * different languages. This array provides a way to override the default
1998 * behavior. For example, to allow language-specific main page and community
2001 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2003 $wgForceUIMsgAsContentMsg = array();
2006 * Fake out the timezone that the server thinks it's in. This will be used for
2007 * date display and not for what's stored in the DB. Leave to null to retain
2008 * your server's OS-based timezone value.
2010 * This variable is currently used only for signature formatting and for local
2011 * time/date parser variables ({{LOCALTIME}} etc.)
2013 * Timezones can be translated by editing MediaWiki messages of type
2014 * timezone-nameinlowercase like timezone-utc.
2018 * $wgLocaltimezone = 'GMT';
2019 * $wgLocaltimezone = 'PST8PDT';
2020 * $wgLocaltimezone = 'Europe/Sweden';
2021 * $wgLocaltimezone = 'CET';
2024 $wgLocaltimezone = null;
2027 * Set an offset from UTC in minutes to use for the default timezone setting
2028 * for anonymous users and new user accounts.
2030 * This setting is used for most date/time displays in the software, and is
2031 * overrideable in user preferences. It is *not* used for signature timestamps.
2033 * You can set it to match the configured server timezone like this:
2034 * $wgLocalTZoffset = date("Z") / 60;
2036 * If your server is not configured for the timezone you want, you can set
2037 * this in conjunction with the signature timezone and override the PHP default
2039 * $wgLocaltimezone="Europe/Berlin";
2040 * date_default_timezone_set( $wgLocaltimezone );
2041 * $wgLocalTZoffset = date("Z") / 60;
2043 * Leave at NULL to show times in universal time (UTC/GMT).
2045 $wgLocalTZoffset = null;
2047 /** @} */ # End of language/charset settings
2049 /*************************************************************************//**
2050 * @name Output format and skin settings
2054 /** The default Content-Type header. */
2055 $wgMimeType = 'text/html';
2057 /** The content type used in script tags. */
2058 $wgJsMimeType = 'text/javascript';
2060 /** The HTML document type. */
2061 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2063 /** The URL of the document type declaration. */
2064 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2066 /** The default xmlns attribute. */
2067 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2070 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2071 * instead, and disable HTML5 features. This may eventually be removed and set
2077 * Defines the value of the version attribute in the <html> tag, if any.
2078 * Will be initialized later if not set explicitly.
2080 $wgHtml5Version = null;
2083 * Enabled RDFa attributes for use in wikitext.
2084 * NOTE: Interaction with HTML5 is somewhat underspecified.
2086 $wgAllowRdfaAttributes = false;
2089 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2091 $wgAllowMicrodataAttributes = false;
2094 * Should we try to make our HTML output well-formed XML? If set to false,
2095 * output will be a few bytes shorter, and the HTML will arguably be more
2096 * readable. If set to true, life will be much easier for the authors of
2097 * screen-scraping bots, and the HTML will arguably be more readable.
2099 * Setting this to false may omit quotation marks on some attributes, omit
2100 * slashes from some self-closing tags, omit some ending tags, etc., where
2101 * permitted by HTML5. Setting it to true will not guarantee that all pages
2102 * will be well-formed, although non-well-formed pages should be rare and it's
2103 * a bug if you find one. Conversely, setting it to false doesn't mean that
2104 * all XML-y constructs will be omitted, just that they might be.
2106 * Because of compatibility with screen-scraping bots, and because it's
2107 * controversial, this is currently left to true by default.
2109 $wgWellFormedXml = true;
2112 * Permit other namespaces in addition to the w3.org default.
2113 * Use the prefix for the key and the namespace for the value. For
2115 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2116 * Normally we wouldn't have to define this in the root <html>
2117 * element, but IE needs it there in some circumstances.
2119 $wgXhtmlNamespaces = array();
2122 * Show IP address, for non-logged in users. It's necessary to switch this off
2123 * for some forms of caching.
2125 $wgShowIPinHeader = true;
2128 * Site notice shown at the top of each page
2130 * MediaWiki:Sitenotice page, which will override this. You can also
2131 * provide a separate message for logged-out users using the
2132 * MediaWiki:Anonnotice page.
2137 * A subtitle to add to the tagline, for skins that have it/
2139 $wgExtraSubtitle = '';
2142 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2144 $wgSiteSupportPage = '';
2147 * Validate the overall output using tidy and refuse
2148 * to display the page if it's not valid.
2150 $wgValidateAllHtml = false;
2153 * Default skin, for new users and anonymous visitors. Registered users may
2154 * change this to any one of the other available skins in their preferences.
2155 * This has to be completely lowercase; see the "skins" directory for the list
2156 * of available skins.
2158 $wgDefaultSkin = 'vector';
2161 * Should we allow the user's to select their own skin that will override the default?
2162 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2164 $wgAllowUserSkin = true;
2167 * Specify the name of a skin that should not be presented in the list of
2168 * available skins. Use for blacklisting a skin which you do not want to
2169 * remove from the .../skins/ directory
2172 /** Array for more like $wgSkipSkin. */
2173 $wgSkipSkins = array();
2176 * Optionally, we can specify a stylesheet to use for media="handheld".
2177 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2178 * If left empty, compliant handheld browsers won't pick up the skin
2179 * stylesheet, which is specified for 'screen' media.
2181 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2182 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2184 * Will also be switched in when 'handheld=yes' is added to the URL, like
2185 * the 'printable=yes' mode for print media.
2187 $wgHandheldStyle = false;
2190 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2191 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2192 * which doesn't recognize 'handheld' but does support media queries on its
2195 * Consider only using this if you have a *really good* handheld stylesheet,
2196 * as iPhone users won't have any way to disable it and use the "grown-up"
2199 $wgHandheldForIPhone = false;
2202 * Allow user Javascript page?
2203 * This enables a lot of neat customizations, but may
2204 * increase security risk to users and server load.
2206 $wgAllowUserJs = false;
2209 * Allow user Cascading Style Sheets (CSS)?
2210 * This enables a lot of neat customizations, but may
2211 * increase security risk to users and server load.
2213 $wgAllowUserCss = false;
2216 * Allow user-preferences implemented in CSS?
2217 * This allows users to customise the site appearance to a greater
2218 * degree; disabling it will improve page load times.
2220 $wgAllowUserCssPrefs = true;
2222 /** Use the site's Javascript page? */
2223 $wgUseSiteJs = true;
2225 /** Use the site's Cascading Style Sheets (CSS)? */
2226 $wgUseSiteCss = true;
2229 * Set to false to disable application of access keys and tooltips,
2230 * eg to avoid keyboard conflicts with system keys or as a low-level
2233 $wgEnableTooltipsAndAccesskeys = true;
2236 * Break out of framesets. This can be used to prevent external sites from
2237 * framing your site with ads.
2239 $wgBreakFrames = false;
2242 * Disable output compression (enabled by default if zlib is available)
2244 $wgDisableOutputCompression = false;
2247 * Should we allow a broader set of characters in id attributes, per HTML5? If
2248 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2249 * functionality is ready, it will be on by default with no option.
2251 * Currently this appears to work fine in Chrome 4 and 5, Firefox 3.5 and 3.6, IE6
2252 * and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
2253 * to work as anchors. So not quite ready for general use yet.
2255 $wgExperimentalHtmlIds = true;
2258 * Search form behavior for Vector skin only
2259 * true = use an icon search button
2260 * false = use Go & Search buttons
2262 $wgVectorUseSimpleSearch = false;
2265 * Watch and unwatch as an icon rather than a link for Vector skin only
2266 * true = use an icon watch/unwatch button
2267 * false = use watch/unwatch text link
2269 $wgVectorUseIconWatch = false;
2272 * Show the name of the current variant as a label in the variants drop-down menu
2274 $wgVectorShowVariantName = false;
2277 * Display user edit counts in various prominent places.
2279 $wgEdititis = false;
2282 * Experimental better directionality support.
2284 $wgBetterDirectionality = false;
2287 /** @} */ # End of output format settings }
2289 /*************************************************************************//**
2290 * @name Resource loader settings
2295 * Client-side resource modules. Extensions should add their module definitions
2299 * $wgResourceModules['ext.myExtension'] = array(
2300 * 'scripts' => 'myExtension.js',
2301 * 'styles' => 'myExtension.css',
2302 * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
2303 * 'localBasePath' => dirname( __FILE__ ),
2304 * 'remoteExtPath' => 'MyExtension',
2307 $wgResourceModules = array();
2310 * Maximum time in seconds to cache resources served by the resource loader
2312 $wgResourceLoaderMaxage = array(
2313 'versioned' => array(
2314 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
2315 'server' => 30 * 24 * 60 * 60, // 30 days
2316 // On the client side (e.g. in the browser cache).
2317 'client' => 30 * 24 * 60 * 60, // 30 days
2319 'unversioned' => array(
2320 'server' => 5 * 60, // 5 minutes
2321 'client' => 5 * 60, // 5 minutes
2326 * Whether to embed private modules inline with HTML output or to bypass
2327 * caching and check the user parameter against $wgUser to prevent
2328 * unauthorized access to private modules.
2330 $wgResourceLoaderInlinePrivateModules = true;
2333 * The default debug mode (on/off) for of ResourceLoader requests. This will still
2334 * be overridden when the debug URL parameter is used.
2336 $wgResourceLoaderDebug = false;
2339 * Enable embedding of certain resources using Edge Side Includes. This will
2340 * improve performance but only works if there is something in front of the
2341 * web server (e..g a Squid or Varnish server) configured to process the ESI.
2343 $wgResourceLoaderUseESI = false;
2345 /** @} */ # End of resource loader settings }
2348 /*************************************************************************//**
2349 * @name Page title and interwiki link settings
2354 * Name of the project namespace. If left set to false, $wgSitename will be
2357 $wgMetaNamespace = false;
2360 * Name of the project talk namespace.
2362 * Normally you can ignore this and it will be something like
2363 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
2364 * manually for grammatical reasons.
2366 $wgMetaNamespaceTalk = false;
2369 * Additional namespaces. If the namespaces defined in Language.php and
2370 * Namespace.php are insufficient, you can create new ones here, for example,
2371 * to import Help files in other languages. You can also override the namespace
2372 * names of existing namespaces. Extensions developers should use
2373 * $wgCanonicalNamespaceNames.
2375 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2376 * no longer be accessible. If you rename it, then you can access them through
2377 * the new namespace name.
2379 * Custom namespaces should start at 100 to avoid conflicting with standard
2380 * namespaces, and should always follow the even/odd main/talk pattern.
2382 #$wgExtraNamespaces =
2383 # array(100 => "Hilfe",
2384 # 101 => "Hilfe_Diskussion",
2386 # 103 => "Discussion_Aide"
2388 $wgExtraNamespaces = array();
2392 * These are alternate names for the primary localised namespace names, which
2393 * are defined by $wgExtraNamespaces and the language file. If a page is
2394 * requested with such a prefix, the request will be redirected to the primary
2397 * Set this to a map from namespace names to IDs.
2399 * $wgNamespaceAliases = array(
2400 * 'Wikipedian' => NS_USER,
2404 $wgNamespaceAliases = array();
2407 * Allowed title characters -- regex character class
2408 * Don't change this unless you know what you're doing
2410 * Problematic punctuation:
2411 * - []{}|# Are needed for link syntax, never enable these
2412 * - <> Causes problems with HTML escaping, don't use
2413 * - % Enabled by default, minor problems with path to query rewrite rules, see below
2414 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
2415 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
2417 * All three of these punctuation problems can be avoided by using an alias, instead of a
2418 * rewrite rule of either variety.
2420 * The problem with % is that when using a path to query rewrite rule, URLs are
2421 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
2422 * %253F, for example, becomes "?". Our code does not double-escape to compensate
2423 * for this, indeed double escaping would break if the double-escaped title was
2424 * passed in the query string rather than the path. This is a minor security issue
2425 * because articles can be created such that they are hard to view or edit.
2427 * In some rare cases you may wish to remove + for compatibility with old links.
2429 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
2430 * this breaks interlanguage links
2432 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
2434 $wgLocalInterwiki = 'w';
2435 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
2437 /** Interwiki caching settings.
2438 $wgInterwikiCache specifies path to constant database file
2439 This cdb database is generated by dumpInterwiki from maintenance
2440 and has such key formats:
2441 dbname:key - a simple key (e.g. enwiki:meta)
2442 _sitename:key - site-scope key (e.g. wiktionary:meta)
2443 __global:key - global-scope key (e.g. __global:meta)
2444 __sites:dbname - site mapping (e.g. __sites:enwiki)
2445 Sites mapping just specifies site name, other keys provide
2446 "local url" data layout.
2447 $wgInterwikiScopes specify number of domains to check for messages:
2448 1 - Just wiki(db)-level
2449 2 - wiki and global levels
2451 $wgInterwikiFallbackSite - if unable to resolve from cache
2453 $wgInterwikiCache = false;
2454 $wgInterwikiScopes = 3;
2455 $wgInterwikiFallbackSite = 'wiki';
2458 * If local interwikis are set up which allow redirects,
2459 * set this regexp to restrict URLs which will be displayed
2460 * as 'redirected from' links.
2462 * It might look something like this:
2463 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
2465 * Leave at false to avoid displaying any incoming redirect markers.
2466 * This does not affect intra-wiki redirects, which don't change
2469 $wgRedirectSources = false;
2472 * Set this to false to avoid forcing the first letter of links to capitals.
2473 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2474 * appearing with a capital at the beginning of a sentence will *not* go to the
2475 * same place as links in the middle of a sentence using a lowercase initial.
2477 $wgCapitalLinks = true;
2480 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2481 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2482 * true by default (and setting them has no effect), due to various things that
2483 * require them to be so. Also, since Talk namespaces need to directly mirror their
2484 * associated content namespaces, the values for those are ignored in favor of the
2485 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2487 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2489 $wgCapitalLinkOverrides = array();
2491 /** Which namespaces should support subpages?
2492 * See Language.php for a list of namespaces.
2494 $wgNamespacesWithSubpages = array(
2497 NS_USER_TALK
=> true,
2498 NS_PROJECT_TALK
=> true,
2499 NS_FILE_TALK
=> true,
2500 NS_MEDIAWIKI
=> true,
2501 NS_MEDIAWIKI_TALK
=> true,
2502 NS_TEMPLATE_TALK
=> true,
2503 NS_HELP_TALK
=> true,
2504 NS_CATEGORY_TALK
=> true
2508 * Array of namespaces which can be deemed to contain valid "content", as far
2509 * as the site statistics are concerned. Useful if additional namespaces also
2510 * contain "content" which should be considered when generating a count of the
2511 * number of articles in the wiki.
2513 $wgContentNamespaces = array( NS_MAIN
);
2516 * Max number of redirects to follow when resolving redirects.
2517 * 1 means only the first redirect is followed (default behavior).
2518 * 0 or less means no redirects are followed.
2520 $wgMaxRedirects = 1;
2523 * Array of invalid page redirect targets.
2524 * Attempting to create a redirect to any of the pages in this array
2525 * will make the redirect fail.
2526 * Userlogout is hard-coded, so it does not need to be listed here.
2527 * (bug 10569) Disallow Mypage and Mytalk as well.
2529 * As of now, this only checks special pages. Redirects to pages in
2530 * other namespaces cannot be invalidated by this variable.
2532 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
2534 /** @} */ # End of title and interwiki settings }
2536 /************************************************************************//**
2537 * @name Parser settings
2538 * These settings configure the transformation from wikitext to HTML.
2543 * Parser configuration. Associative array with the following members:
2545 * class The class name
2547 * preprocessorClass The preprocessor class. Two classes are currently available:
2548 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
2549 * storage, and Preprocessor_DOM, which uses the DOM module for
2550 * temporary storage. Preprocessor_DOM generally uses less memory;
2551 * the speed of the two is roughly the same.
2553 * If this parameter is not given, it uses Preprocessor_DOM if the
2554 * DOM module is available, otherwise it uses Preprocessor_Hash.
2556 * The entire associative array will be passed through to the constructor as
2557 * the first parameter. Note that only Setup.php can use this variable --
2558 * the configuration will change at runtime via $wgParser member functions, so
2559 * the contents of this variable will be out-of-date. The variable can only be
2560 * changed during LocalSettings.php, in particular, it can't be changed during
2561 * an extension setup function.
2563 $wgParserConf = array(
2564 'class' => 'Parser',
2565 #'preprocessorClass' => 'Preprocessor_Hash',
2568 /** Maximum indent level of toc. */
2569 $wgMaxTocLevel = 999;
2572 * A complexity limit on template expansion
2574 $wgMaxPPNodeCount = 1000000;
2577 * Maximum recursion depth for templates within templates.
2578 * The current parser adds two levels to the PHP call stack for each template,
2579 * and xdebug limits the call stack to 100 by default. So this should hopefully
2580 * stop the parser before it hits the xdebug limit.
2582 $wgMaxTemplateDepth = 40;
2584 /** @see $wgMaxTemplateDepth */
2585 $wgMaxPPExpandDepth = 40;
2587 /** The external URL protocols */
2588 $wgUrlProtocols = array(
2594 'telnet://', // Well if we're going to support the above.. -ævar
2595 'nntp://', // @bug 3808 RFC 1738
2605 * If true, removes (substitutes) templates in "~~~~" signatures.
2607 $wgCleanSignatures = true;
2609 /** Whether to allow inline image pointing to other websites */
2610 $wgAllowExternalImages = false;
2613 * If the above is false, you can specify an exception here. Image URLs
2614 * that start with this string are then rendered, while all others are not.
2615 * You can use this to set up a trusted, simple repository of images.
2616 * You may also specify an array of strings to allow multiple sites
2620 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
2621 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
2624 $wgAllowExternalImagesFrom = '';
2626 /** If $wgAllowExternalImages is false, you can allow an on-wiki
2627 * whitelist of regular expression fragments to match the image URL
2628 * against. If the image matches one of the regular expression fragments,
2629 * The image will be displayed.
2631 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
2632 * Or false to disable it
2634 $wgEnableImageWhitelist = true;
2637 * A different approach to the above: simply allow the <img> tag to be used.
2638 * This allows you to specify alt text and other attributes, copy-paste HTML to
2639 * your wiki more easily, etc. However, allowing external images in any manner
2640 * will allow anyone with editing rights to snoop on your visitors' IP
2641 * addresses and so forth, if they wanted to, by inserting links to images on
2642 * sites they control.
2644 $wgAllowImageTag = false;
2647 * $wgUseTidy: use tidy to make sure HTML output is sane.
2648 * Tidy is a free tool that fixes broken HTML.
2649 * See http://www.w3.org/People/Raggett/tidy/
2651 * - $wgTidyBin should be set to the path of the binary and
2652 * - $wgTidyConf to the path of the configuration file.
2653 * - $wgTidyOpts can include any number of parameters.
2654 * - $wgTidyInternal controls the use of the PECL extension to use an in-
2655 * process tidy library instead of spawning a separate program.
2656 * Normally you shouldn't need to override the setting except for
2657 * debugging. To install, use 'pear install tidy' and add a line
2658 * 'extension=tidy.so' to php.ini.
2661 /** @see $wgUseTidy */
2662 $wgAlwaysUseTidy = false;
2663 /** @see $wgUseTidy */
2664 $wgTidyBin = 'tidy';
2665 /** @see $wgUseTidy */
2666 $wgTidyConf = $IP.'/includes/tidy.conf';
2667 /** @see $wgUseTidy */
2669 /** @see $wgUseTidy */
2670 $wgTidyInternal = extension_loaded( 'tidy' );
2673 * Put tidy warnings in HTML comments
2674 * Only works for internal tidy.
2676 $wgDebugTidy = false;
2678 /** Allow raw, unchecked HTML in <html>...</html> sections.
2679 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2680 * TO RESTRICT EDITING to only those that you trust
2685 * Set a default target for external links, e.g. _blank to pop up a new window
2687 $wgExternalLinkTarget = false;
2690 * If true, external URL links in wiki text will be given the
2691 * rel="nofollow" attribute as a hint to search engines that
2692 * they should not be followed for ranking purposes as they
2693 * are user-supplied and thus subject to spamming.
2695 $wgNoFollowLinks = true;
2698 * Namespaces in which $wgNoFollowLinks doesn't apply.
2699 * See Language.php for a list of namespaces.
2701 $wgNoFollowNsExceptions = array();
2704 * If this is set to an array of domains, external links to these domain names
2705 * (or any subdomains) will not be set to rel="nofollow" regardless of the
2706 * value of $wgNoFollowLinks. For instance:
2708 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
2710 * This would add rel="nofollow" to links to de.wikipedia.org, but not
2711 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
2714 $wgNoFollowDomainExceptions = array();
2717 * Allow DISPLAYTITLE to change title display
2719 $wgAllowDisplayTitle = true;
2722 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
2725 $wgRestrictDisplayTitle = true;
2728 * Maximum number of calls per parse to expensive parser functions such as
2731 $wgExpensiveParserFunctionLimit = 100;
2734 * Preprocessor caching threshold
2736 $wgPreprocessorCacheThreshold = 1000;
2739 * Enable interwiki transcluding. Only when iw_trans=1.
2741 $wgEnableScaryTranscluding = false;
2744 * Expiry time for interwiki transclusion
2746 $wgTranscludeCacheExpiry = 3600;
2748 /** @} */ # end of parser settings }
2750 /************************************************************************//**
2756 * Under which condition should a page in the main namespace be counted
2757 * as a valid article? If $wgUseCommaCount is set to true, it will be
2758 * counted if it contains at least one comma. If it is set to false
2759 * (default), it will only be counted if it contains at least one [[wiki
2760 * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
2762 * Retroactively changing this variable will not affect
2763 * the existing count (cf. maintenance/recount.sql).
2765 $wgUseCommaCount = false;
2768 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
2769 * values are easier on the database. A value of 1 causes the counters to be
2770 * updated on every hit, any higher value n cause them to update *on average*
2771 * every n hits. Should be set to either 1 or something largish, eg 1000, for
2772 * maximum efficiency.
2774 $wgHitcounterUpdateFreq = 1;
2777 * How many days user must be idle before he is considered inactive. Will affect
2778 * the number shown on Special:Statistics and Special:ActiveUsers special page.
2779 * You might want to leave this as the default value, to provide comparable
2780 * numbers between different wikis.
2782 $wgActiveUserDays = 30;
2784 /** @} */ # End of statistics }
2786 /************************************************************************//**
2787 * @name User accounts, authentication
2791 /** For compatibility with old installations set to false */
2792 $wgPasswordSalt = true;
2795 * Specifies the minimal length of a user password. If set to 0, empty pass-
2796 * words are allowed.
2798 $wgMinimalPasswordLength = 1;
2801 * Enabes or disables JavaScript-based suggestions of password strength
2803 $wgLivePasswordStrengthChecks = false;
2806 * List of weak passwords which shouldn't be allowed.
2807 * The items should be in lowercase. The check is case insensitive.
2809 $wgWeakPasswords = array( 'password', 'passpass', 'passpass1' );
2812 * Maximum number of Unicode characters in signature
2814 $wgMaxSigChars = 255;
2817 * Maximum number of bytes in username. You want to run the maintenance
2818 * script ./maintenance/checkUsernames.php once you have changed this value.
2820 $wgMaxNameChars = 255;
2823 * Array of usernames which may not be registered or logged in from
2824 * Maintenance scripts can still use these
2826 $wgReservedUsernames = array(
2827 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
2828 'Conversion script', // Used for the old Wikipedia software upgrade
2829 'Maintenance script', // Maintenance scripts which perform editing, image import script
2830 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
2831 'msg:double-redirect-fixer', // Automatic double redirect fix
2832 'msg:usermessage-editor', // Default user for leaving user messages
2833 'msg:proxyblocker', // For Special:Blockme
2837 * Settings added to this array will override the default globals for the user
2838 * preferences used by anonymous visitors and newly created accounts.
2839 * For instance, to disable section editing links:
2840 * $wgDefaultUserOptions ['editsection'] = 0;
2843 $wgDefaultUserOptions = array(
2844 'ccmeonemails' => 0,
2846 'contextchars' => 50,
2847 'contextlines' => 5,
2848 'date' => 'default',
2851 'disablesuggest' => 0,
2852 'editfont' => 'default',
2853 'editondblclick' => 0,
2855 'editsectiononrightclick' => 0,
2856 'enotifminoredits' => 0,
2857 'enotifrevealaddr' => 0,
2858 'enotifusertalkpages' => 1,
2859 'enotifwatchlistpages' => 0,
2860 'extendwatchlist' => 0,
2861 'externaldiff' => 0,
2862 'externaleditor' => 0,
2864 'forceeditsummary' => 0,
2865 'gender' => 'unknown',
2867 'hidepatrolled' => 0,
2868 'highlightbroken' => 1,
2872 'minordefault' => 0,
2873 'newpageshidepatrolled' => 0,
2875 'noconvertlink' => 0,
2876 'norollbackdiff' => 0,
2877 'numberheadings' => 0,
2878 'previewonfirst' => 0,
2879 'previewontop' => 1,
2883 'rememberpassword' => 0,
2885 'searchlimit' => 20,
2886 'showhiddencats' => 0,
2887 'showjumplinks' => 1,
2888 'shownumberswatching' => 1,
2892 'stubthreshold' => 0,
2895 'uselivepreview' => 0,
2897 'watchcreations' => 0,
2898 'watchdefault' => 0,
2899 'watchdeletion' => 0,
2900 'watchlistdays' => 3.0,
2901 'watchlisthideanons' => 0,
2902 'watchlisthidebots' => 0,
2903 'watchlisthideliu' => 0,
2904 'watchlisthideminor' => 0,
2905 'watchlisthideown' => 0,
2906 'watchlisthidepatrolled' => 0,
2912 * Whether or not to allow and use real name fields.
2913 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2916 $wgAllowRealName = true;
2918 /** An array of preferences to not show for the user */
2919 $wgHiddenPrefs = array();
2922 * Characters to prevent during new account creations.
2923 * This is used in a regular expression character class during
2924 * registration (regex metacharacters like / are escaped).
2926 $wgInvalidUsernameCharacters = '@';
2929 * Character used as a delimiter when testing for interwiki userrights
2930 * (In Special:UserRights, it is possible to modify users on different
2931 * databases if the delimiter is used, e.g. Someuser@enwiki).
2933 * It is recommended that you have this delimiter in
2934 * $wgInvalidUsernameCharacters above, or you will not be able to
2935 * modify the user rights of those users via Special:UserRights
2937 $wgUserrightsInterwikiDelimiter = '@';
2940 * Use some particular type of external authentication. The specific
2941 * authentication module you use will normally require some extra settings to
2944 * null indicates no external authentication is to be used. Otherwise,
2945 * $wgExternalAuthType must be the name of a non-abstract class that extends
2948 * Core authentication modules can be found in includes/extauth/.
2950 $wgExternalAuthType = null;
2953 * Configuration for the external authentication. This may include arbitrary
2954 * keys that depend on the authentication mechanism. For instance,
2955 * authentication against another web app might require that the database login
2956 * info be provided. Check the file where your auth mechanism is defined for
2957 * info on what to put here.
2959 $wgExternalAuthConf = array();
2962 * When should we automatically create local accounts when external accounts
2963 * already exist, if using ExternalAuth? Can have three values: 'never',
2964 * 'login', 'view'. 'view' requires the external database to support cookies,
2965 * and implies 'login'.
2967 * TODO: Implement 'view' (currently behaves like 'login').
2969 $wgAutocreatePolicy = 'login';
2972 * Policies for how each preference is allowed to be changed, in the presence
2973 * of external authentication. The keys are preference keys, e.g., 'password'
2974 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
2977 * - local: Allow changes to this pref through the wiki interface but only
2978 * apply them locally (default).
2979 * - semiglobal: Allow changes through the wiki interface and try to apply them
2980 * to the foreign database, but continue on anyway if that fails.
2981 * - global: Allow changes through the wiki interface, but only let them go
2982 * through if they successfully update the foreign database.
2983 * - message: Allow no local changes for linked accounts; replace the change
2984 * form with a message provided by the auth plugin, telling the user how to
2985 * change the setting externally (maybe providing a link, etc.). If the auth
2986 * plugin provides no message for this preference, hide it entirely.
2988 * Accounts that are not linked to an external account are never affected by
2989 * this setting. You may want to look at $wgHiddenPrefs instead.
2990 * $wgHiddenPrefs supersedes this option.
2992 * TODO: Implement message, global.
2994 $wgAllowPrefChange = array();
2997 * This is to let user authenticate using https when they come from http.
2998 * Based on an idea by George Herbert on wikitech-l:
2999 * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
3002 $wgSecureLogin = false;
3004 * Default for 'use secure login' checkbox
3007 $wgSecureLoginStickHTTPS = false;
3009 /** @} */ # end user accounts }
3011 /************************************************************************//**
3012 * @name User rights, access control and monitoring
3016 /** Allow sysops to ban logged-in users */
3017 $wgSysopUserBans = true;
3019 /** Allow sysops to ban IP ranges */
3020 $wgSysopRangeBans = true;
3023 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
3025 $wgAutoblockExpiry = 86400;
3028 * Set this to true to allow blocked users to edit their own user talk page.
3030 $wgBlockAllowsUTEdit = false;
3032 /** Allow sysops to ban users from accessing Emailuser */
3033 $wgSysopEmailBans = true;
3036 * Limits on the possible sizes of range blocks.
3038 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
3039 * /1 is a small range and a /31 is a large range. Setting this to half the
3040 * number of bits avoids such errors.
3042 $wgBlockCIDRLimit = array(
3043 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
3044 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
3048 * If true, blocked users will not be allowed to login. When using this with
3049 * a public wiki, the effect of logging out blocked users may actually be
3050 * avers: unless the user's address is also blocked (e.g. auto-block),
3051 * logging the user out will again allow reading and editing, just as for
3052 * anonymous visitors.
3054 $wgBlockDisablesLogin = false;
3057 * Pages anonymous user may see as an array, e.g.
3060 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
3063 * Special:Userlogin and Special:Resetpass are always whitelisted.
3065 * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
3066 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3068 * Also note that this will only protect _pages in the wiki_. Uploaded files
3069 * will remain readable. You can use img_auth.php to protect uploaded files,
3070 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3072 $wgWhitelistRead = false;
3075 * Should editors be required to have a validated e-mail
3076 * address before being allowed to edit?
3078 $wgEmailConfirmToEdit = false;
3081 * Permission keys given to users in each group.
3082 * All users are implicitly in the '*' group including anonymous visitors;
3083 * logged-in users are all implicitly in the 'user' group. These will be
3084 * combined with the permissions of all groups that a given user is listed
3085 * in in the user_groups table.
3087 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3088 * doing! This will wipe all permissions, and may mean that your users are
3089 * unable to perform certain essential tasks or access new functionality
3090 * when new permissions are introduced and default grants established.
3092 * Functionality to make pages inaccessible has not been extensively tested
3093 * for security. Use at your own risk!
3095 * This replaces wgWhitelistAccount and wgWhitelistEdit
3097 $wgGroupPermissions = array();
3099 /** @cond file_level_code */
3100 // Implicit group for all visitors
3101 $wgGroupPermissions['*']['createaccount'] = true;
3102 $wgGroupPermissions['*']['read'] = true;
3103 $wgGroupPermissions['*']['edit'] = true;
3104 $wgGroupPermissions['*']['createpage'] = true;
3105 $wgGroupPermissions['*']['createtalk'] = true;
3106 $wgGroupPermissions['*']['writeapi'] = true;
3107 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3109 // Implicit group for all logged-in accounts
3110 $wgGroupPermissions['user']['move'] = true;
3111 $wgGroupPermissions['user']['move-subpages'] = true;
3112 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3113 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
3114 $wgGroupPermissions['user']['read'] = true;
3115 $wgGroupPermissions['user']['edit'] = true;
3116 $wgGroupPermissions['user']['createpage'] = true;
3117 $wgGroupPermissions['user']['createtalk'] = true;
3118 $wgGroupPermissions['user']['writeapi'] = true;
3119 $wgGroupPermissions['user']['upload'] = true;
3120 $wgGroupPermissions['user']['reupload'] = true;
3121 $wgGroupPermissions['user']['reupload-shared'] = true;
3122 $wgGroupPermissions['user']['minoredit'] = true;
3123 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3124 $wgGroupPermissions['user']['sendemail'] = true;
3126 // Implicit group for accounts that pass $wgAutoConfirmAge
3127 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3129 // Users with bot privilege can have their edits hidden
3130 // from various log pages by default
3131 $wgGroupPermissions['bot']['bot'] = true;
3132 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3133 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3134 $wgGroupPermissions['bot']['autopatrol'] = true;
3135 $wgGroupPermissions['bot']['suppressredirect'] = true;
3136 $wgGroupPermissions['bot']['apihighlimits'] = true;
3137 $wgGroupPermissions['bot']['writeapi'] = true;
3138 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3140 // Most extra permission abilities go to this group
3141 $wgGroupPermissions['sysop']['block'] = true;
3142 $wgGroupPermissions['sysop']['createaccount'] = true;
3143 $wgGroupPermissions['sysop']['delete'] = true;
3144 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3145 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3146 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3147 $wgGroupPermissions['sysop']['undelete'] = true;
3148 $wgGroupPermissions['sysop']['editinterface'] = true;
3149 $wgGroupPermissions['sysop']['editusercss'] = true;
3150 $wgGroupPermissions['sysop']['edituserjs'] = true;
3151 $wgGroupPermissions['sysop']['import'] = true;
3152 $wgGroupPermissions['sysop']['importupload'] = true;
3153 $wgGroupPermissions['sysop']['move'] = true;
3154 $wgGroupPermissions['sysop']['move-subpages'] = true;
3155 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3156 $wgGroupPermissions['sysop']['patrol'] = true;
3157 $wgGroupPermissions['sysop']['autopatrol'] = true;
3158 $wgGroupPermissions['sysop']['protect'] = true;
3159 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3160 $wgGroupPermissions['sysop']['rollback'] = true;
3161 $wgGroupPermissions['sysop']['trackback'] = true;
3162 $wgGroupPermissions['sysop']['upload'] = true;
3163 $wgGroupPermissions['sysop']['reupload'] = true;
3164 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3165 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3166 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3167 $wgGroupPermissions['sysop']['upload_by_url'] = true;
3168 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3169 $wgGroupPermissions['sysop']['blockemail'] = true;
3170 $wgGroupPermissions['sysop']['markbotedits'] = true;
3171 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3172 $wgGroupPermissions['sysop']['browsearchive'] = true;
3173 $wgGroupPermissions['sysop']['noratelimit'] = true;
3174 $wgGroupPermissions['sysop']['movefile'] = true;
3175 $wgGroupPermissions['sysop']['unblockself'] = true;
3176 $wgGroupPermissions['sysop']['suppressredirect'] = true;
3177 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3179 // Permission to change users' group assignments
3180 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3181 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3182 // Permission to change users' groups assignments across wikis
3183 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3184 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3185 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3187 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3188 // To hide usernames from users and Sysops
3189 #$wgGroupPermissions['suppress']['hideuser'] = true;
3190 // To hide revisions/log items from users and Sysops
3191 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3192 // For private suppression log access
3193 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3196 * The developer group is deprecated, but can be activated if need be
3197 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3198 * that a lock file be defined and creatable/removable by the web
3201 # $wgGroupPermissions['developer']['siteadmin'] = true;
3206 * Permission keys revoked from users in each group.
3207 * This acts the same way as wgGroupPermissions above, except that
3208 * if the user is in a group here, the permission will be removed from them.
3210 * Improperly setting this could mean that your users will be unable to perform
3211 * certain essential tasks, so use at your own risk!
3213 $wgRevokePermissions = array();
3216 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3218 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3221 * A map of group names that the user is in, to group names that those users
3222 * are allowed to add or revoke.
3224 * Setting the list of groups to add or revoke to true is equivalent to "any group".
3226 * For example, to allow sysops to add themselves to the "bot" group:
3228 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3230 * Implicit groups may be used for the source group, for instance:
3232 * $wgGroupsRemoveFromSelf = array( '*' => true );
3234 * This allows users in the '*' group (i.e. any user) to remove themselves from
3235 * any group that they happen to be in.
3238 $wgGroupsAddToSelf = array();
3240 /** @see $wgGroupsAddToSelf */
3241 $wgGroupsRemoveFromSelf = array();
3244 * Set of available actions that can be restricted via action=protect
3245 * You probably shouldn't change this.
3246 * Translated through restriction-* messages.
3248 $wgRestrictionTypes = array( 'edit', 'move' );
3251 * Rights which can be required for each protection level (via action=protect)
3253 * You can add a new protection level that requires a specific
3254 * permission by manipulating this array. The ordering of elements
3255 * dictates the order on the protection form's lists.
3257 * - '' will be ignored (i.e. unprotected)
3258 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
3260 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
3263 * Set the minimum permissions required to edit pages in each
3264 * namespace. If you list more than one permission, a user must
3265 * have all of them to edit pages in that namespace.
3267 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
3269 $wgNamespaceProtection = array();
3272 * Pages in namespaces in this array can not be used as templates.
3273 * Elements must be numeric namespace ids.
3274 * Among other things, this may be useful to enforce read-restrictions
3275 * which may otherwise be bypassed by using the template machanism.
3277 $wgNonincludableNamespaces = array();
3280 * Number of seconds an account is required to age before it's given the
3281 * implicit 'autoconfirm' group membership. This can be used to limit
3282 * privileges of new accounts.
3284 * Accounts created by earlier versions of the software may not have a
3285 * recorded creation date, and will always be considered to pass the age test.
3287 * When left at 0, all registered accounts will pass.
3291 * $wgAutoConfirmAge = 600; // ten minutes
3292 * $wgAutoConfirmAge = 3600*24; // one day
3295 $wgAutoConfirmAge = 0;
3298 * Number of edits an account requires before it is autoconfirmed.
3299 * Passing both this AND the time requirement is needed. Example:
3302 * $wgAutoConfirmCount = 50;
3305 $wgAutoConfirmCount = 0;
3308 * Automatically add a usergroup to any user who matches certain conditions.
3310 * array( '&' or '|' or '^', cond1, cond2, ... )
3311 * where cond1, cond2, ... are themselves conditions; *OR*
3312 * APCOND_EMAILCONFIRMED, *OR*
3313 * array( APCOND_EMAILCONFIRMED ), *OR*
3314 * array( APCOND_EDITCOUNT, number of edits ), *OR*
3315 * array( APCOND_AGE, seconds since registration ), *OR*
3316 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
3317 * array( APCOND_ISIP, ip ), *OR*
3318 * array( APCOND_IPINRANGE, range ), *OR*
3319 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
3320 * array( APCOND_BLOCKED ), *OR*
3321 * similar constructs defined by extensions.
3323 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
3324 * user who has provided an e-mail address.
3326 $wgAutopromote = array(
3327 'autoconfirmed' => array( '&',
3328 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
3329 array( APCOND_AGE
, &$wgAutoConfirmAge ),
3334 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
3335 * can assign which groups at Special:Userrights. Example configuration:
3338 * // Bureaucrat can add any group
3339 * $wgAddGroups['bureaucrat'] = true;
3340 * // Bureaucrats can only remove bots and sysops
3341 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
3342 * // Sysops can make bots
3343 * $wgAddGroups['sysop'] = array( 'bot' );
3344 * // Sysops can disable other sysops in an emergency, and disable bots
3345 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
3348 $wgAddGroups = array();
3349 /** @see $wgAddGroups */
3350 $wgRemoveGroups = array();
3353 * A list of available rights, in addition to the ones defined by the core.
3354 * For extensions only.
3356 $wgAvailableRights = array();
3359 * Optional to restrict deletion of pages with higher revision counts
3360 * to users with the 'bigdelete' permission. (Default given to sysops.)
3362 $wgDeleteRevisionsLimit = 0;
3364 /** Number of accounts each IP address may create, 0 to disable.
3365 * Requires memcached */
3366 $wgAccountCreationThrottle = 0;
3369 * Edits matching these regular expressions in body text
3370 * will be recognised as spam and rejected automatically.
3372 * There's no administrator override on-wiki, so be careful what you set. :)
3373 * May be an array of regexes or a single string for backwards compatibility.
3375 * See http://en.wikipedia.org/wiki/Regular_expression
3376 * Note that each regex needs a beginning/end delimiter, eg: # or /
3378 $wgSpamRegex = array();
3380 /** Same as the above except for edit summaries */
3381 $wgSummarySpamRegex = array();
3384 * Similarly you can get a function to do the job. The function will be given
3385 * the following args:
3386 * - a Title object for the article the edit is made on
3387 * - the text submitted in the textarea (wpTextbox1)
3388 * - the section number.
3389 * The return should be boolean indicating whether the edit matched some evilness:
3391 * - false : let it through
3393 * @deprecated Use hooks. See SpamBlacklist extension.
3395 $wgFilterCallback = false;
3398 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3401 $wgEnableDnsBlacklist = false;
3404 * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
3407 $wgEnableSorbs = false;
3410 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
3413 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3416 * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
3419 $wgSorbsUrl = array();
3422 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3423 * what the other methods might say.
3425 $wgProxyWhitelist = array();
3428 * Simple rate limiter options to brake edit floods. Maximum number actions
3429 * allowed in the given number of seconds; after that the violating client re-
3430 * ceives HTTP 500 error pages until the period elapses.
3432 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3434 * This option set is experimental and likely to change. Requires memcached.
3436 $wgRateLimits = array(
3438 'anon' => null, // for any and all anonymous edits (aggregate)
3439 'user' => null, // for each logged-in user
3440 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3441 'ip' => null, // for each anon and recent account
3442 'subnet' => null, // ... with final octet removed
3450 'mailpassword' => array(
3453 'emailuser' => array(
3459 * Set to a filename to log rate limiter hits.
3461 $wgRateLimitLog = null;
3464 * Array of groups which should never trigger the rate limiter
3466 * @deprecated as of 1.13.0, the preferred method is using
3467 * $wgGroupPermissions[]['noratelimit']. However, this will still
3470 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3472 $wgRateLimitsExcludedGroups = array();
3475 * Array of IPs which should be excluded from rate limits.
3476 * This may be useful for whitelisting NAT gateways for conferences, etc.
3478 $wgRateLimitsExcludedIPs = array();
3481 * Log IP addresses in the recentchanges table; can be accessed only by
3482 * extensions (e.g. CheckUser) or a DB admin
3484 $wgPutIPinRC = true;
3487 * Limit password attempts to X attempts per Y seconds per IP per account.
3488 * Requires memcached.
3490 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3492 /** @} */ # end of user rights settings
3494 /************************************************************************//**
3495 * @name Proxy scanner settings
3500 * If you enable this, every editor's IP address will be scanned for open HTTP
3503 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
3504 * ISP and ask for your server to be shut down.
3506 * You have been warned.
3508 $wgBlockOpenProxies = false;
3509 /** Port we want to scan for a proxy */
3510 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
3511 /** Script used to scan */
3512 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
3514 $wgProxyMemcExpiry = 86400;
3515 /** This should always be customised in LocalSettings.php */
3516 $wgSecretKey = false;
3517 /** big list of banned IP addresses, in the keys not the values */
3518 $wgProxyList = array();
3520 $wgProxyKey = false;
3522 /** @} */ # end of proxy scanner settings
3524 /************************************************************************//**
3525 * @name Cookie settings
3530 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
3532 $wgCookieExpiration = 30*86400;
3535 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
3536 * or ".any.subdomain.net"
3538 $wgCookieDomain = '';
3539 $wgCookiePath = '/';
3540 $wgCookieSecure = ($wgProto == 'https');
3541 $wgDisableCookieCheck = false;
3544 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
3545 * using the database name.
3547 $wgCookiePrefix = false;
3550 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
3551 * in browsers that support this feature. This can mitigates some classes of
3554 * Only supported on PHP 5.2 or higher.
3556 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
3559 * If the requesting browser matches a regex in this blacklist, we won't
3560 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
3562 $wgHttpOnlyBlacklist = array(
3563 // Internet Explorer for Mac; sometimes the cookies work, sometimes
3564 // they don't. It's difficult to predict, as combinations of path
3565 // and expiration options affect its parsing.
3566 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
3569 /** A list of cookies that vary the cache (for use by extensions) */
3570 $wgCacheVaryCookies = array();
3572 /** Override to customise the session name */
3573 $wgSessionName = false;
3575 /** @} */ # end of cookie settings }
3577 /************************************************************************//**
3578 * @name LaTeX (mathematical formulas)
3583 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
3584 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
3585 * (ImageMagick) installed and available in the PATH.
3586 * Please see math/README for more information.
3589 /** Location of the texvc binary */
3590 $wgTexvc = $IP . '/math/texvc';
3592 * Texvc background color
3593 * use LaTeX color format as used in \special function
3594 * for transparent background use value 'Transparent' for alpha transparency or
3595 * 'transparent' for binary transparency.
3597 $wgTexvcBackgroundColor = 'transparent';
3600 * Normally when generating math images, we double-check that the
3601 * directories we want to write to exist, and that files that have
3602 * been generated still exist when we need to bring them up again.
3604 * This lets us give useful error messages in case of permission
3605 * problems, and automatically rebuild images that have been lost.
3607 * On a big site with heavy NFS traffic this can be slow and flaky,
3608 * so sometimes we want to short-circuit it by setting this to false.
3610 $wgMathCheckFiles = true;
3612 /* @} */ # end LaTeX }
3614 /************************************************************************//**
3615 * @name Profiling, testing and debugging
3617 * To enable profiling, edit StartProfiler.php
3623 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
3624 * The debug log file should be not be publicly accessible if it is used, as it
3625 * may contain private data.
3627 $wgDebugLogFile = '';
3630 * Prefix for debug log lines
3632 $wgDebugLogPrefix = '';
3635 * If true, instead of redirecting, show a page with a link to the redirect
3636 * destination. This allows for the inspection of PHP error messages, and easy
3637 * resubmission of form data. For developer use only.
3639 $wgDebugRedirects = false;
3642 * If true, log debugging data from action=raw.
3643 * This is normally false to avoid overlapping debug entries due to gen=css and
3646 $wgDebugRawPage = false;
3649 * Send debug data to an HTML comment in the output.
3651 * This may occasionally be useful when supporting a non-technical end-user. It's
3652 * more secure than exposing the debug log file to the web, since the output only
3653 * contains private data for the current user. But it's not ideal for development
3654 * use since data is lost on fatal errors and redirects.
3656 $wgDebugComments = false;
3659 * Write SQL queries to the debug log
3661 $wgDebugDumpSql = false;
3664 * Set to an array of log group keys to filenames.
3665 * If set, wfDebugLog() output for that group will go to that file instead
3666 * of the regular $wgDebugLogFile. Useful for enabling selective logging
3669 $wgDebugLogGroups = array();
3672 * Display debug data at the bottom of the main content area.
3674 * Useful for developers and technical users trying to working on a closed wiki.
3676 $wgShowDebug = false;
3679 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
3681 $wgDebugTimestamps = false;
3684 * Print HTTP headers for every request in the debug information.
3686 $wgDebugPrintHttpHeaders = true;
3689 * Show the contents of $wgHooks in Special:Version
3691 $wgSpecialVersionShowHooks = false;
3694 * Whether to show "we're sorry, but there has been a database error" pages.
3695 * Displaying errors aids in debugging, but may display information useful
3698 $wgShowSQLErrors = false;
3701 * If set to true, uncaught exceptions will print a complete stack trace
3702 * to output. This should only be used for debugging, as it may reveal
3703 * private information in function parameters due to PHP's backtrace
3706 $wgShowExceptionDetails = false;
3709 * If true, show a backtrace for database errors
3711 $wgShowDBErrorBacktrace = false;
3714 * Expose backend server host names through the API and various HTML comments
3716 $wgShowHostnames = false;
3719 * If set to true MediaWiki will throw notices for some possible error
3720 * conditions and for deprecated functions.
3722 $wgDevelopmentWarnings = false;
3724 /** Only record profiling info for pages that took longer than this */
3725 $wgProfileLimit = 0.0;
3727 /** Don't put non-profiling info into log file */
3728 $wgProfileOnly = false;
3731 * Log sums from profiling into "profiling" table in db.
3733 * You have to create a 'profiling' table in your database before using
3734 * this feature, see maintenance/archives/patch-profiling.sql
3736 * To enable profiling, edit StartProfiler.php
3738 $wgProfileToDatabase = false;
3740 /** If true, print a raw call tree instead of per-function report */
3741 $wgProfileCallTree = false;
3743 /** Should application server host be put into profiling table */
3744 $wgProfilePerHost = false;
3747 * Host for UDP profiler.
3749 * The host should be running a daemon which can be obtained from MediaWiki
3750 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
3752 $wgUDPProfilerHost = '127.0.0.1';
3755 * Port for UDP profiler.
3756 * @see $wgUDPProfilerHost
3758 $wgUDPProfilerPort = '3811';
3760 /** Detects non-matching wfProfileIn/wfProfileOut calls */
3761 $wgDebugProfiling = false;
3763 /** Output debug message on every wfProfileIn/wfProfileOut */
3764 $wgDebugFunctionEntry = 0;
3767 * Destination for wfIncrStats() data...
3768 * 'cache' to go into the system cache, if enabled (memcached)
3769 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
3772 $wgStatsMethod = 'cache';
3774 /** Whereas to count the number of time an article is viewed.
3775 * Does not work if pages are cached (for example with squid).
3777 $wgDisableCounters = false;
3780 * Support blog-style "trackbacks" for articles. See
3781 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3783 $wgUseTrackbacks = false;
3786 * Parser test suite files to be run by parserTests.php when no specific
3787 * filename is passed to it.
3789 * Extensions may add their own tests to this array, or site-local tests
3790 * may be added via LocalSettings.php
3794 $wgParserTestFiles = array(
3795 "$IP/maintenance/tests/parser/parserTests.txt",
3796 "$IP/maintenance/tests/parser/ExtraParserTests.txt"
3800 * If configured, specifies target CodeReview installation to send test
3801 * result data from 'parserTests.php --upload'
3803 * Something like this:
3804 * $wgParserTestRemote = array(
3805 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
3806 * 'repo' => 'MediaWiki',
3807 * 'suite' => 'ParserTests',
3808 * 'path' => '/trunk/phase3', // not used client-side; for reference
3809 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
3812 $wgParserTestRemote = false;
3814 /** @} */ # end of profiling, testing and debugging }
3816 /************************************************************************//**
3822 * Set this to true to disable the full text search feature.
3824 $wgDisableTextSearch = false;
3827 * Set to true to have nicer highligted text in search results,
3828 * by default off due to execution overhead
3830 $wgAdvancedSearchHighlighting = false;
3833 * Regexp to match word boundaries, defaults for non-CJK languages
3834 * should be empty for CJK since the words are not separate
3836 * @todo FIXME: checks for lower than required PHP version (5.1.x).
3838 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
3839 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
3842 * Set to true to have the search engine count total
3843 * search matches to present in the Special:Search UI.
3844 * Not supported by every search engine shipped with MW.
3846 * This could however be slow on larger wikis, and is pretty flaky
3847 * with the current title vs content split. Recommend avoiding until
3848 * that's been worked out cleanly; but this may aid in testing the
3849 * search UI and API to confirm that the result count works.
3851 $wgCountTotalSearchHits = false;
3854 * Template for OpenSearch suggestions, defaults to API action=opensearch
3856 * Sites with heavy load would tipically have these point to a custom
3857 * PHP wrapper to avoid firing up mediawiki for every keystroke
3859 * Placeholders: {searchTerms}
3862 $wgOpenSearchTemplate = false;
3865 * Enable suggestions while typing in search boxes
3866 * (results are passed around in OpenSearch format)
3867 * Requires $wgEnableOpenSearchSuggest = true;
3869 $wgEnableMWSuggest = false;
3872 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
3873 * false if you've disabled MWSuggest or another suggestion script and
3874 * want reduce load caused by cached scripts pulling suggestions.
3876 $wgEnableOpenSearchSuggest = true;
3879 * Expiry time for search suggestion responses
3881 $wgSearchSuggestCacheExpiry = 1200;
3884 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
3886 * Placeholders: {searchTerms}, {namespaces}, {dbname}
3889 $wgMWSuggestTemplate = false;
3892 * If you've disabled search semi-permanently, this also disables updates to the
3893 * table. If you ever re-enable, be sure to rebuild the search table.
3895 $wgDisableSearchUpdate = false;
3898 * List of namespaces which are searched by default. Example:
3901 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
3902 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
3905 $wgNamespacesToBeSearchedDefault = array(
3910 * Namespaces to be searched when user clicks the "Help" tab
3913 * Same format as $wgNamespacesToBeSearchedDefault
3915 $wgNamespacesToBeSearchedHelp = array(
3921 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
3922 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
3925 $wgSearchEverythingOnlyLoggedIn = false;
3928 * Disable the internal MySQL-based search, to allow it to be
3929 * implemented by an extension instead.
3931 $wgDisableInternalSearch = false;
3934 * Set this to a URL to forward search requests to some external location.
3935 * If the URL includes '$1', this will be replaced with the URL-encoded
3938 * For example, to forward to Google you'd have something like:
3939 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3940 * '&domains=http://example.com' .
3941 * '&sitesearch=http://example.com' .
3942 * '&ie=utf-8&oe=utf-8';
3944 $wgSearchForwardUrl = null;
3947 * Search form behavior
3948 * true = use Go & Search buttons
3949 * false = use Go button & Advanced search link
3951 $wgUseTwoButtonsSearchForm = true;
3954 * Array of namespaces to generate a Google sitemap for when the
3955 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
3956 * nerated for all namespaces.
3958 $wgSitemapNamespaces = false;
3960 /** @} */ # end of search settings
3962 /************************************************************************//**
3963 * @name Edit user interface
3968 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
3969 * fall back to the old behaviour (no merging).
3971 $wgDiff3 = '/usr/bin/diff3';
3974 * Path to the GNU diff utility.
3976 $wgDiff = '/usr/bin/diff';
3979 * Which namespaces have special treatment where they should be preview-on-open
3980 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
3981 * can specify namespaces of pages they have special treatment for
3983 $wgPreviewOnOpenNamespaces = array(
3988 * Activate external editor interface for files and pages
3989 * See http://www.mediawiki.org/wiki/Manual:External_editors
3991 $wgUseExternalEditor = true;
3993 /** Go button goes straight to the edit screen if the article doesn't exist. */
3994 $wgGoToEdit = false;
3997 * Enable the UniversalEditButton for browsers that support it
3998 * (currently only Firefox with an extension)
3999 * See http://universaleditbutton.org for more background information
4001 $wgUniversalEditButton = true;
4004 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4005 * will try to automatically create one. This feature can be disabled by set-
4006 * ting this variable false.
4008 $wgUseAutomaticEditSummaries = true;
4010 /** @} */ # end edit UI }
4012 /************************************************************************//**
4014 * See also $wgSiteNotice
4019 * @cond file_level_code
4020 * Set $wgCommandLineMode if it's not set already, to avoid notices
4022 if( !isset( $wgCommandLineMode ) ) {
4023 $wgCommandLineMode = false;
4027 /** For colorized maintenance script output, is your terminal background dark ? */
4028 $wgCommandLineDarkBg = false;
4031 * Array for extensions to register their maintenance scripts with the
4032 * system. The key is the name of the class and the value is the full
4035 $wgMaintenanceScripts = array();
4038 * Set this to a string to put the wiki into read-only mode. The text will be
4039 * used as an explanation to users.
4041 * This prevents most write operations via the web interface. Cache updates may
4042 * still be possible. To prevent database writes completely, use the read_only
4048 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
4049 * Its contents will be shown to users as part of the read-only warning
4052 * Defaults to "{$wgUploadDirectory}/lock_yBgMBwiR".
4054 $wgReadOnlyFile = false;
4057 * If this is set to some string, this opens up config/index.php for upgrades
4058 * when needed. You will need to provide this key to use it
4060 $wgUpgradeKey = false;
4062 /** @} */ # End of maintenance }
4064 /************************************************************************//**
4065 * @name Recent changes, new pages, watchlist and history
4070 * Recentchanges items are periodically purged; entries older than this many
4072 * Default: 13 weeks = about three months
4074 $wgRCMaxAge = 13 * 7 * 24 * 3600;
4077 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
4078 * higher than what will be stored. Note that this is disabled by default
4079 * because we sometimes do have RC data which is beyond the limit for some
4080 * reason, and some users may use the high numbers to display that data which
4083 $wgRCFilterByAge = false;
4086 * List of Days and Limits options to list in the Special:Recentchanges and
4087 * Special:Recentchangeslinked pages.
4089 $wgRCLinkLimits = array( 50, 100, 250, 500 );
4090 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
4093 * Send recent changes updates via UDP. The updates will be formatted for IRC.
4094 * Set this to the IP address of the receiver.
4096 $wgRC2UDPAddress = false;
4099 * Port number for RC updates
4101 $wgRC2UDPPort = false;
4104 * Prefix to prepend to each UDP packet.
4105 * This can be used to identify the wiki. A script is available called
4106 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
4107 * tab to identify the IRC channel to send the log line to.
4109 $wgRC2UDPPrefix = '';
4112 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
4113 * IRC feed. If this is set to a string, that string will be used as the prefix.
4115 $wgRC2UDPInterwikiPrefix = false;
4118 * Set to true to omit "bot" edits (by users with the bot permission) from the
4121 $wgRC2UDPOmitBots = false;
4124 * Enable user search in Special:Newpages
4125 * This is really a temporary hack around an index install bug on some Wikipedias.
4126 * Kill it once fixed.
4128 $wgEnableNewpagesUserFilter = true;
4130 /** Use RC Patrolling to check for vandalism */
4131 $wgUseRCPatrol = true;
4133 /** Use new page patrolling to check new pages on Special:Newpages */
4134 $wgUseNPPatrol = true;
4136 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
4139 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
4140 * eg Recentchanges, Newpages. */
4143 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
4144 * A cached version will continue to be served out even if changes
4145 * are made, until this many seconds runs out since the last render.
4147 * If set to 0, feed caching is disabled. Use this for debugging only;
4148 * feed generation can be pretty slow with diffs.
4150 $wgFeedCacheTimeout = 60;
4152 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
4153 * pages larger than this size. */
4154 $wgFeedDiffCutoff = 32768;
4156 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
4157 * every page. Some sites might have a different feed they'd like to promote
4158 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
4159 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
4160 * of either 'rss' or 'atom'.
4162 $wgOverrideSiteFeed = array();
4165 * Which feed types should we provide by default? This can include 'rss',
4166 * 'atom', neither, or both.
4168 $wgAdvertisedFeedTypes = array( 'atom' );
4170 /** Show watching users in recent changes, watchlist and page history views */
4171 $wgRCShowWatchingUsers = false; # UPO
4172 /** Show watching users in Page views */
4173 $wgPageShowWatchingUsers = false;
4174 /** Show the amount of changed characters in recent changes */
4175 $wgRCShowChangedSize = true;
4178 * If the difference between the character counts of the text
4179 * before and after the edit is below that value, the value will be
4180 * highlighted on the RC page.
4182 $wgRCChangedSizeThreshold = 500;
4185 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
4186 * view for watched pages with new changes */
4187 $wgShowUpdatedMarker = true;
4190 * Disable links to talk pages of anonymous users (IPs) in listings on special
4191 * pages like page history, Special:Recentchanges, etc.
4193 $wgDisableAnonTalk = false;
4196 * Enable filtering of categories in Recentchanges
4198 $wgAllowCategorizedRecentChanges = false;
4201 * Allow filtering by change tag in recentchanges, history, etc
4202 * Has no effect if no tags are defined in valid_tag.
4204 $wgUseTagFilter = true;
4206 /** @} */ # end RC/watchlist }
4208 /************************************************************************//**
4209 * @name Copyright and credits settings
4213 /** RDF metadata toggles */
4214 $wgEnableDublinCoreRdf = false;
4215 $wgEnableCreativeCommonsRdf = false;
4217 /** Override for copyright metadata.
4218 * TODO: these options need documentation
4220 $wgRightsPage = null;
4221 $wgRightsUrl = null;
4222 $wgRightsText = null;
4223 $wgRightsIcon = null;
4226 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
4228 $wgLicenseTerms = false;
4230 /** Set this to some HTML to override the rights icon with an arbitrary logo */
4231 $wgCopyrightIcon = null;
4233 /** Set this to true if you want detailed copyright information forms on Upload. */
4234 $wgUseCopyrightUpload = false;
4236 /** Set this to false if you want to disable checking that detailed copyright
4237 * information values are not empty. */
4238 $wgCheckCopyrightUpload = true;
4241 * Set this to the number of authors that you want to be credited below an
4242 * article text. Set it to zero to hide the attribution block, and a negative
4243 * number (like -1) to show all authors. Note that this will require 2-3 extra
4244 * database hits, which can have a not insignificant impact on performance for
4249 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
4250 * Otherwise, link to a separate credits page. */
4251 $wgShowCreditsIfMax = true;
4253 /** @} */ # end of copyright and credits settings }
4255 /************************************************************************//**
4256 * @name Import / Export
4261 * List of interwiki prefixes for wikis we'll accept as sources for
4262 * Special:Import (for sysops). Since complete page history can be imported,
4263 * these should be 'trusted'.
4265 * If a user has the 'import' permission but not the 'importupload' permission,
4266 * they will only be able to run imports through this transwiki interface.
4268 $wgImportSources = array();
4271 * Optional default target namespace for interwiki imports.
4272 * Can use this to create an incoming "transwiki"-style queue.
4273 * Set to numeric key, not the name.
4275 * Users may override this in the Special:Import dialog.
4277 $wgImportTargetNamespace = null;
4280 * If set to false, disables the full-history option on Special:Export.
4281 * This is currently poorly optimized for long edit histories, so is
4282 * disabled on Wikimedia's sites.
4284 $wgExportAllowHistory = true;
4287 * If set nonzero, Special:Export requests for history of pages with
4288 * more revisions than this will be rejected. On some big sites things
4289 * could get bogged down by very very long pages.
4291 $wgExportMaxHistory = 0;
4294 * Return distinct author list (when not returning full history)
4296 $wgExportAllowListContributors = false ;
4299 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
4300 * up to this specified level, which will cause it to include all
4301 * pages linked to from the pages you specify. Since this number
4302 * can become *insanely large* and could easily break your wiki,
4303 * it's disabled by default for now.
4305 * There's a HARD CODED limit of 5 levels of recursion to prevent a
4306 * crazy-big export from being done by someone setting the depth
4307 * number too high. In other words, last resort safety net.
4309 $wgExportMaxLinkDepth = 0;
4312 * Whether to allow the "export all pages in namespace" option
4314 $wgExportFromNamespaces = false;
4316 /** @} */ # end of import/export }
4318 /*************************************************************************//**
4324 * A list of callback functions which are called once MediaWiki is fully initialised
4326 $wgExtensionFunctions = array();
4329 * Extension functions for initialisation of skins. This is called somewhat earlier
4330 * than $wgExtensionFunctions.
4332 $wgSkinExtensionFunctions = array();
4335 * Extension messages files.
4337 * Associative array mapping extension name to the filename where messages can be
4338 * found. The file should contain variable assignments. Any of the variables
4339 * present in languages/messages/MessagesEn.php may be defined, but $messages
4340 * is the most common.
4342 * Variables defined in extensions will override conflicting variables defined
4346 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
4349 $wgExtensionMessagesFiles = array();
4352 * Aliases for special pages provided by extensions.
4353 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
4355 $wgExtensionAliasesFiles = array();
4358 * Parser output hooks.
4359 * This is an associative array where the key is an extension-defined tag
4360 * (typically the extension name), and the value is a PHP callback.
4361 * These will be called as an OutputPageParserOutput hook, if the relevant
4362 * tag has been registered with the parser output object.
4364 * Registration is done with $pout->addOutputHook( $tag, $data ).
4366 * The callback has the form:
4367 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
4369 $wgParserOutputHooks = array();
4372 * List of valid skin names.
4373 * The key should be the name in all lower case, the value should be a display name.
4374 * The default skins will be added later, by Skin::getSkinNames(). Use
4375 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
4377 $wgValidSkinNames = array();
4380 * Special page list.
4381 * See the top of SpecialPage.php for documentation.
4383 $wgSpecialPages = array();
4386 * Array mapping class names to filenames, for autoloading.
4388 $wgAutoloadClasses = array();
4391 * An array of extension types and inside that their names, versions, authors,
4392 * urls, descriptions and pointers to localized description msgs. Note that
4393 * the version, url, description and descriptionmsg key can be omitted.
4396 * $wgExtensionCredits[$type][] = array(
4397 * 'name' => 'Example extension',
4399 * 'path' => __FILE__,
4400 * 'author' => 'Foo Barstein',
4401 * 'url' => 'http://wwww.example.com/Example%20Extension/',
4402 * 'description' => 'An example extension',
4403 * 'descriptionmsg' => 'exampleextension-desc',
4407 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
4408 * Where 'descriptionmsg' can be an array with message key and parameters:
4409 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
4411 $wgExtensionCredits = array();
4414 * Authentication plugin.
4419 * Global list of hooks.
4420 * Add a hook by doing:
4421 * $wgHooks['event_name'][] = $function;
4423 * $wgHooks['event_name'][] = array($function, $data);
4425 * $wgHooks['event_name'][] = array($object, 'method');
4430 * Maps jobs to their handling classes; extensions
4431 * can add to this to provide custom jobs
4433 $wgJobClasses = array(
4434 'refreshLinks' => 'RefreshLinksJob',
4435 'refreshLinks2' => 'RefreshLinksJob2',
4436 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
4437 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
4438 'sendMail' => 'EmaillingJob',
4439 'enotifNotify' => 'EnotifNotifyJob',
4440 'fixDoubleRedirect' => 'DoubleRedirectJob',
4441 'uploadFromUrl' => 'UploadFromUrlJob',
4445 * Additional functions to be performed with updateSpecialPages.
4446 * Expensive Querypages are already updated.
4448 $wgSpecialPageCacheUpdates = array(
4449 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
4453 * Hooks that are used for outputting exceptions. Format is:
4454 * $wgExceptionHooks[] = $funcname
4456 * $wgExceptionHooks[] = array( $class, $funcname )
4457 * Hooks should return strings or false
4459 $wgExceptionHooks = array();
4463 * Page property link table invalidation lists. When a page property
4464 * changes, this may require other link tables to be updated (eg
4465 * adding __HIDDENCAT__ means the hiddencat tracking category will
4466 * have been added, so the categorylinks table needs to be rebuilt).
4467 * This array can be added to by extensions.
4469 $wgPagePropLinkInvalidations = array(
4470 'hiddencat' => 'categorylinks',
4473 /** @} */ # End extensions }
4475 /*************************************************************************//**
4481 * Use experimental, DMOZ-like category browser
4483 $wgUseCategoryBrowser = false;
4486 * On category pages, show thumbnail gallery for images belonging to that
4487 * category instead of listing them as articles.
4489 $wgCategoryMagicGallery = true;
4492 * Paging limit for categories
4494 $wgCategoryPagingLimit = 200;
4497 * A version indicator for collations that will be stored in cl_collation for
4498 * all new rows. Used when the collation algorithm changes: a script checks
4499 * for all rows where cl_collation != $wgCategoryCollation and regenerates
4500 * cl_sortkey based on the page name and cl_sortkey_prefix.
4502 * Currently only supports 'uppercase', which just uppercases the string. This
4503 * is a dummy collation, to be replaced later by real ones.
4505 $wgCategoryCollation = 'uppercase';
4507 /** @} */ # End categories }
4509 /*************************************************************************//**
4515 * The logging system has two levels: an event type, which describes the
4516 * general category and can be viewed as a named subset of all logs; and
4517 * an action, which is a specific kind of event that can exist in that
4520 $wgLogTypes = array( '',
4534 * This restricts log access to those who have a certain right
4535 * Users without this will not see it in the option menu and can not view it
4536 * Restricted logs are not added to recent changes
4537 * Logs should remain non-transcludable
4538 * Format: logtype => permissiontype
4540 $wgLogRestrictions = array(
4541 'suppress' => 'suppressionlog'
4545 * Show/hide links on Special:Log will be shown for these log types.
4547 * This is associative array of log type => boolean "hide by default"
4549 * See $wgLogTypes for a list of available log types.
4552 * $wgFilterLogTypes => array(
4554 * 'import' => false,
4557 * Will display show/hide links for the move and import logs. Move logs will be
4558 * hidden by default unless the link is clicked. Import logs will be shown by
4559 * default, and hidden when the link is clicked.
4561 * A message of the form log-show-hide-<type> should be added, and will be used
4562 * for the link text.
4564 $wgFilterLogTypes = array(
4569 * Lists the message key string for each log type. The localized messages
4570 * will be listed in the user interface.
4572 * Extensions with custom log types may add to this array.
4574 $wgLogNames = array(
4575 '' => 'all-logs-page',
4576 'block' => 'blocklogpage',
4577 'protect' => 'protectlogpage',
4578 'rights' => 'rightslog',
4579 'delete' => 'dellogpage',
4580 'upload' => 'uploadlogpage',
4581 'move' => 'movelogpage',
4582 'import' => 'importlogpage',
4583 'patrol' => 'patrol-log-page',
4584 'merge' => 'mergelog',
4585 'suppress' => 'suppressionlog',
4589 * Lists the message key string for descriptive text to be shown at the
4590 * top of each log type.
4592 * Extensions with custom log types may add to this array.
4594 $wgLogHeaders = array(
4595 '' => 'alllogstext',
4596 'block' => 'blocklogtext',
4597 'protect' => 'protectlogtext',
4598 'rights' => 'rightslogtext',
4599 'delete' => 'dellogpagetext',
4600 'upload' => 'uploadlogpagetext',
4601 'move' => 'movelogpagetext',
4602 'import' => 'importlogpagetext',
4603 'patrol' => 'patrol-log-header',
4604 'merge' => 'mergelogpagetext',
4605 'suppress' => 'suppressionlogtext',
4609 * Lists the message key string for formatting individual events of each
4610 * type and action when listed in the logs.
4612 * Extensions with custom log types may add to this array.
4614 $wgLogActions = array(
4615 'block/block' => 'blocklogentry',
4616 'block/unblock' => 'unblocklogentry',
4617 'block/reblock' => 'reblock-logentry',
4618 'protect/protect' => 'protectedarticle',
4619 'protect/modify' => 'modifiedarticleprotection',
4620 'protect/unprotect' => 'unprotectedarticle',
4621 'protect/move_prot' => 'movedarticleprotection',
4622 'rights/rights' => 'rightslogentry',
4623 'delete/delete' => 'deletedarticle',
4624 'delete/restore' => 'undeletedarticle',
4625 'delete/revision' => 'revdelete-logentry',
4626 'delete/event' => 'logdelete-logentry',
4627 'upload/upload' => 'uploadedimage',
4628 'upload/overwrite' => 'overwroteimage',
4629 'upload/revert' => 'uploadedimage',
4630 'move/move' => '1movedto2',
4631 'move/move_redir' => '1movedto2_redir',
4632 'move/move_rev' => 'moverevlogentry',
4633 'import/upload' => 'import-logentry-upload',
4634 'import/interwiki' => 'import-logentry-interwiki',
4635 'merge/merge' => 'pagemerge-logentry',
4636 'suppress/revision' => 'revdelete-logentry',
4637 'suppress/file' => 'revdelete-logentry',
4638 'suppress/event' => 'logdelete-logentry',
4639 'suppress/delete' => 'suppressedarticle',
4640 'suppress/block' => 'blocklogentry',
4641 'suppress/reblock' => 'reblock-logentry',
4642 'patrol/patrol' => 'patrol-log-line',
4646 * The same as above, but here values are names of functions,
4648 * @see LogPage::actionText
4650 $wgLogActionsHandlers = array();
4653 * Maintain a log of newusers at Log/newusers?
4655 $wgNewUserLog = true;
4658 * Log the automatic creations of new users accounts?
4660 $wgLogAutocreatedAccounts = false;
4662 /** @} */ # end logging }
4664 /*************************************************************************//**
4665 * @name Special pages (general and miscellaneous)
4670 * Allow special page inclusions such as {{Special:Allpages}}
4672 $wgAllowSpecialInclusion = true;
4675 * Set this to an array of special page names to prevent
4676 * maintenance/updateSpecialPages.php from updating those pages.
4678 $wgDisableQueryPageUpdate = false;
4681 * List of special pages, followed by what subtitle they should go under
4682 * at Special:SpecialPages
4684 $wgSpecialPageGroups = array(
4685 'DoubleRedirects' => 'maintenance',
4686 'BrokenRedirects' => 'maintenance',
4687 'Lonelypages' => 'maintenance',
4688 'Uncategorizedpages' => 'maintenance',
4689 'Uncategorizedcategories' => 'maintenance',
4690 'Uncategorizedimages' => 'maintenance',
4691 'Uncategorizedtemplates' => 'maintenance',
4692 'Unusedcategories' => 'maintenance',
4693 'Unusedimages' => 'maintenance',
4694 'Protectedpages' => 'maintenance',
4695 'Protectedtitles' => 'maintenance',
4696 'Unusedtemplates' => 'maintenance',
4697 'Withoutinterwiki' => 'maintenance',
4698 'Longpages' => 'maintenance',
4699 'Shortpages' => 'maintenance',
4700 'Ancientpages' => 'maintenance',
4701 'Deadendpages' => 'maintenance',
4702 'Wantedpages' => 'maintenance',
4703 'Wantedcategories' => 'maintenance',
4704 'Wantedfiles' => 'maintenance',
4705 'Wantedtemplates' => 'maintenance',
4706 'Unwatchedpages' => 'maintenance',
4707 'Fewestrevisions' => 'maintenance',
4709 'Userlogin' => 'login',
4710 'Userlogout' => 'login',
4711 'CreateAccount' => 'login',
4713 'Recentchanges' => 'changes',
4714 'Recentchangeslinked' => 'changes',
4715 'Watchlist' => 'changes',
4716 'Newimages' => 'changes',
4717 'Newpages' => 'changes',
4719 'Tags' => 'changes',
4721 'Upload' => 'media',
4722 'Listfiles' => 'media',
4723 'MIMEsearch' => 'media',
4724 'FileDuplicateSearch' => 'media',
4725 'Filepath' => 'media',
4727 'Listusers' => 'users',
4728 'Activeusers' => 'users',
4729 'Listgrouprights' => 'users',
4730 'Ipblocklist' => 'users',
4731 'Contributions' => 'users',
4732 'Emailuser' => 'users',
4733 'Listadmins' => 'users',
4734 'Listbots' => 'users',
4735 'Userrights' => 'users',
4736 'Blockip' => 'users',
4737 'Preferences' => 'users',
4738 'Resetpass' => 'users',
4739 'DeletedContributions' => 'users',
4741 'Mostlinked' => 'highuse',
4742 'Mostlinkedcategories' => 'highuse',
4743 'Mostlinkedtemplates' => 'highuse',
4744 'Mostcategories' => 'highuse',
4745 'Mostimages' => 'highuse',
4746 'Mostrevisions' => 'highuse',
4748 'Allpages' => 'pages',
4749 'Prefixindex' => 'pages',
4750 'Listredirects' => 'pages',
4751 'Categories' => 'pages',
4752 'Disambiguations' => 'pages',
4754 'Randompage' => 'redirects',
4755 'Randomredirect' => 'redirects',
4756 'Mypage' => 'redirects',
4757 'Mytalk' => 'redirects',
4758 'Mycontributions' => 'redirects',
4759 'Search' => 'redirects',
4760 'LinkSearch' => 'redirects',
4762 'ComparePages' => 'pagetools',
4763 'Movepage' => 'pagetools',
4764 'MergeHistory' => 'pagetools',
4765 'Revisiondelete' => 'pagetools',
4766 'Undelete' => 'pagetools',
4767 'Export' => 'pagetools',
4768 'Import' => 'pagetools',
4769 'Whatlinkshere' => 'pagetools',
4771 'Statistics' => 'wiki',
4772 'Version' => 'wiki',
4774 'Unlockdb' => 'wiki',
4775 'Allmessages' => 'wiki',
4776 'Popularpages' => 'wiki',
4778 'Specialpages' => 'other',
4779 'Blockme' => 'other',
4780 'Booksources' => 'other',
4783 /** Whether or not to sort special pages in Special:Specialpages */
4785 $wgSortSpecialPages = true;
4788 * Filter for Special:Randompage. Part of a WHERE clause
4789 * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
4791 $wgExtraRandompageSQL = false;
4794 * On Special:Unusedimages, consider images "used", if they are put
4795 * into a category. Default (false) is not to count those as used.
4797 $wgCountCategorizedImagesAsUsed = false;
4800 * Maximum number of links to a redirect page listed on
4801 * Special:Whatlinkshere/RedirectDestination
4803 $wgMaxRedirectLinksRetrieved = 500;
4805 /** @} */ # end special pages }
4807 /*************************************************************************//**
4808 * @name Robot (search engine crawler) policy
4809 * See also $wgNoFollowLinks.
4814 * Default robot policy. The default policy is to encourage indexing and fol-
4815 * lowing of links. It may be overridden on a per-namespace and/or per-page
4818 $wgDefaultRobotPolicy = 'index,follow';
4821 * Robot policies per namespaces. The default policy is given above, the array
4822 * is made of namespace constants as defined in includes/Defines.php. You can-
4823 * not specify a different default policy for NS_SPECIAL: it is always noindex,
4824 * nofollow. This is because a number of special pages (e.g., ListPages) have
4825 * many permutations of options that display the same data under redundant
4826 * URLs, so search engine spiders risk getting lost in a maze of twisty special
4827 * pages, all alike, and never reaching your actual content.
4830 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
4832 $wgNamespaceRobotPolicies = array();
4835 * Robot policies per article. These override the per-namespace robot policies.
4836 * Must be in the form of an array where the key part is a properly canonical-
4837 * ised text form title and the value is a robot policy.
4839 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
4840 * 'User:Bob' => 'index,follow' );
4841 * Example that DOES NOT WORK because the names are not canonical text forms:
4842 * $wgArticleRobotPolicies = array(
4843 * # Underscore, not space!
4844 * 'Main_Page' => 'noindex,follow',
4845 * # "Project", not the actual project name!
4846 * 'Project:X' => 'index,follow',
4847 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
4848 * 'abc' => 'noindex,nofollow'
4851 $wgArticleRobotPolicies = array();
4854 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
4855 * will not function, so users can't decide whether pages in that namespace are
4856 * indexed by search engines. If set to null, default to $wgContentNamespaces.
4858 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
4860 $wgExemptFromUserRobotsControl = null;
4862 /** @} */ # End robot policy }
4864 /************************************************************************//**
4865 * @name AJAX and API
4866 * Note: The AJAX entry point which this section refers to is gradually being
4867 * replaced by the API entry point, api.php. They are essentially equivalent.
4868 * Both of them are used for dynamic client-side features, via XHR.
4873 * Enable the MediaWiki API for convenient access to
4874 * machine-readable data via api.php
4876 * See http://www.mediawiki.org/wiki/API
4878 $wgEnableAPI = true;
4881 * Allow the API to be used to perform write operations
4882 * (page edits, rollback, etc.) when an authorised user
4885 $wgEnableWriteAPI = true;
4888 * API module extensions
4889 * Associative array mapping module name to class name.
4890 * Extension modules may override the core modules.
4892 $wgAPIModules = array();
4893 $wgAPIMetaModules = array();
4894 $wgAPIPropModules = array();
4895 $wgAPIListModules = array();
4898 * Maximum amount of rows to scan in a DB query in the API
4899 * The default value is generally fine
4901 $wgAPIMaxDBRows = 5000;
4904 * The maximum size (in bytes) of an API result.
4905 * Don't set this lower than $wgMaxArticleSize*1024
4907 $wgAPIMaxResultSize = 8388608;
4910 * The maximum number of uncached diffs that can be retrieved in one API
4911 * request. Set this to 0 to disable API diffs altogether
4913 $wgAPIMaxUncachedDiffs = 1;
4916 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
4917 * API request logging
4919 $wgAPIRequestLog = false;
4922 * Cache the API help text for up to an hour. Disable this during API
4923 * debugging and development
4925 $wgAPICacheHelp = true;
4928 * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
4931 $wgAPICacheHelpTimeout = 60*60;
4934 * Enable AJAX framework
4939 * List of Ajax-callable functions.
4940 * Extensions acting as Ajax callbacks must register here
4942 $wgAjaxExportList = array( 'wfAjaxGetFileUrl' );
4945 * Enable watching/unwatching pages using AJAX.
4946 * Requires $wgUseAjax to be true too.
4947 * Causes wfAjaxWatch to be added to $wgAjaxExportList
4949 $wgAjaxWatch = true;
4952 * Enable AJAX check for file overwrite, pre-upload
4954 $wgAjaxUploadDestCheck = true;
4957 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
4959 $wgAjaxLicensePreview = true;
4962 * Settings for incoming cross-site AJAX requests:
4963 * Newer browsers support cross-site AJAX when the target resource allows requests
4964 * from the origin domain by the Access-Control-Allow-Origin header.
4965 * This is currently only used by the API (requests to api.php)
4966 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
4968 * '*' matches any number of characters
4969 * '?' matches any 1 character
4972 $wgCrossSiteAJAXdomains = array(
4973 'www.mediawiki.org',
4980 $wgCrossSiteAJAXdomains = array();
4983 * Domains that should not be allowed to make AJAX requests,
4984 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
4985 * Uses the same syntax as $wgCrossSiteAJAXdomains
4988 $wgCrossSiteAJAXdomainExceptions = array();
4990 /** @} */ # End AJAX and API }
4992 /************************************************************************//**
4993 * @name Shell and process control
4998 * Maximum amount of virtual memory available to shell processes under linux, in KB.
5000 $wgMaxShellMemory = 102400;
5003 * Maximum file size created by shell processes under linux, in KB
5004 * ImageMagick convert for example can be fairly hungry for scratch space
5006 $wgMaxShellFileSize = 102400;
5009 * Maximum CPU time in seconds for shell processes under linux
5011 $wgMaxShellTime = 180;
5014 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
5016 $wgPhpCli = '/usr/bin/php';
5019 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
5020 * For Unix-like operating systems, set this to to a locale that has a UTF-8
5021 * character set. Only the character set is relevant.
5023 $wgShellLocale = 'en_US.utf8';
5025 /** @} */ # End shell }
5027 /************************************************************************//**
5033 * Timeout for HTTP requests done internally
5035 $wgHTTPTimeout = 25;
5038 * Timeout for Asynchronous (background) HTTP requests
5040 $wgAsyncHTTPTimeout = 25;
5043 * Proxy to use for CURL requests.
5045 $wgHTTPProxy = false;
5047 /** @} */ # End HTTP client }
5049 /************************************************************************//**
5051 * See also $wgEnotifUseJobQ.
5056 * Number of jobs to perform per request. May be less than one in which case
5057 * jobs are performed probabalistically. If this is zero, jobs will not be done
5058 * during ordinary apache requests. In this case, maintenance/runJobs.php should
5059 * be run periodically.
5064 * Number of rows to update per job
5066 $wgUpdateRowsPerJob = 500;
5069 * Number of rows to update per query
5071 $wgUpdateRowsPerQuery = 100;
5073 /** @} */ # End job queue }
5075 /************************************************************************//**
5076 * @name Miscellaneous
5080 /** Allow the "info" action, very inefficient at the moment */
5081 $wgAllowPageInfo = false;
5083 /** Name of the external diff engine to use */
5084 $wgExternalDiffEngine = false;
5087 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
5089 $wgDisabledActions = array();
5092 * Disable redirects to special pages and interwiki redirects, which use a 302
5093 * and have no "redirected from" link.
5095 $wgDisableHardRedirects = false;
5098 * LinkHolderArray batch size
5101 $wgLinkHolderBatchSize = 1000;
5104 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
5105 * use this value to override:
5107 $wgRegisterInternalExternals = false;
5110 * Maximum number of pages to move at once when moving subpages with a page.
5112 $wgMaximumMovedPages = 100;
5115 * Fix double redirects after a page move.
5116 * Tends to conflict with page move vandalism, use only on a private wiki.
5118 $wgFixDoubleRedirects = false;
5121 * Allow redirection to another page when a user logs in.
5122 * To enable, set to a string like 'Main Page'
5124 $wgRedirectOnLogin = null;
5127 * Configuration for processing pool control, for use in high-traffic wikis.
5128 * An implementation is provided in the PoolCounter extension.
5130 * This configuration array maps pool types to an associative array. The only
5131 * defined key in the associative array is "class", which gives the class name.
5132 * The remaining elements are passed through to the class as constructor
5133 * parameters. Example:
5135 * $wgPoolCounterConf = array( 'ArticleView' => array(
5136 * 'class' => 'PoolCounter_Client',
5137 * 'timeout' => 15, // wait timeout in seconds
5138 * 'workers' => 5, // maximum number of active threads in each pool
5139 * 'maxqueue' => 50, // maximum number of total threads in each pool
5140 * ... any extension-specific options...
5143 $wgPoolCounterConf = null;
5146 * To disable file delete/restore temporarily
5148 $wgUploadMaintenance = false;
5151 * The location of the MediaWiki package repository to use.
5156 $wgRepositoryApiLocation = 'http://www.mediawiki.org/w/api.php';
5159 * The location of the remote web interface for the selected repository.
5164 $wgRepositoryLocation = 'http://www.mediawiki.org/wiki/Special:Repository';
5167 * List of package states to filter update detection and extension listing on.
5172 $wgRepositoryPackageStates = array(
5182 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
5184 $wgEnableSelenium = false;
5185 $wgSeleniumTestConfigs = array();
5186 $wgSeleniumConfigFile = null;
5191 * For really cool vim folding this needs to be at the end:
5192 * vim: foldmarker=@{,@} foldmethod=marker