7 * To customize your installation, edit "LocalSettings.php". If you make
8 * changes here, they will be lost on next upgrade of MediaWiki!
10 * Note that since all these string interpolations are expanded
11 * before LocalSettings is included, if you localize something
12 * like $wgScriptPath, you must also localize everything that
15 * Documentation is in the source and on:
16 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 # This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
21 if( !defined( 'MEDIAWIKI' ) ) {
22 echo "This file is part of MediaWiki and is not a valid entry point\n";
27 * Create a site configuration object
28 * Not used for much in a default install
30 if ( !defined( 'MW_PHP4' ) ) {
31 require_once( "$IP/includes/SiteConfiguration.php" );
32 $wgConf = new SiteConfiguration
;
35 /** MediaWiki version number */
36 $wgVersion = '1.17alpha';
38 /** Name of the site. It must be changed in LocalSettings.php */
39 $wgSitename = 'MediaWiki';
42 * Name of the project namespace. If left set to false, $wgSitename will be
45 $wgMetaNamespace = false;
48 * Name of the project talk namespace.
50 * Normally you can ignore this and it will be something like
51 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
52 * manually for grammatical reasons. It is currently only respected by those
53 * languages where it might be relevant and where no automatic grammar converter
56 $wgMetaNamespaceTalk = false;
59 /** URL of the server. It will be automatically built including https mode */
62 if( isset( $_SERVER['SERVER_NAME'] ) ) {
63 $wgServerName = $_SERVER['SERVER_NAME'];
64 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
65 $wgServerName = $_SERVER['HOSTNAME'];
66 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
67 $wgServerName = $_SERVER['HTTP_HOST'];
68 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
69 $wgServerName = $_SERVER['SERVER_ADDR'];
71 $wgServerName = 'localhost';
74 # check if server use https:
75 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
77 $wgServer = $wgProto.'://' . $wgServerName;
78 # If the port is a non-standard one, add it to the URL
79 if( isset( $_SERVER['SERVER_PORT'] )
80 && !strpos( $wgServerName, ':' )
81 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
82 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
84 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
122 * Script users will request to get articles
123 * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
124 * LocalSettings.php is correctly set!
126 * Will be set based on $wgScriptPath in Setup.php if not overridden in
127 * LocalSettings.php. Generally you should not need to change this unless you
128 * don't like seeing "index.php".
130 $wgScriptExtension = '.php'; ///< extension to append to script names by default
131 $wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
132 $wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
139 * If you do override them, be sure to set them all!
141 * These will relatively rarely need to be set manually, unless you are
142 * splitting style sheets or images outside the main document root.
145 * asset paths as seen by users
147 $wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
148 $wgExtensionAssetsPath = false; ///< defaults to "{$wgScriptPath}/extensions"
151 * filesystem stylesheets directory
153 $wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
154 $wgStyleSheetPath = &$wgStylePath;
155 $wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
156 $wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
157 $wgUploadDirectory = false; ///< defaults to "{$IP}/images"
158 $wgHashedUploadDirectory = true;
159 $wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
160 $wgFavicon = '/favicon.ico';
161 $wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
162 $wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
163 $wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
164 $wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
165 $wgUploadBaseUrl = "";
169 * Directory for caching data in the local filesystem. Should not be accessible
170 * from the web. Set this to false to not use any local caches.
172 * Note: if multiple wikis share the same localisation cache directory, they
173 * must all have the same set of extensions. You can set a directory just for
174 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
176 $wgCacheDirectory = false;
179 * Default value for chmoding of new directories.
181 $wgDirectoryMode = 0777;
184 * New file storage paths; currently used only for deleted files.
187 * $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
190 $wgFileStore = array();
191 $wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
192 $wgFileStore['deleted']['url'] = null; ///< Private
193 $wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
195 $wgImgAuthDetails = false; ///< defaults to false - only set to true if you use img_auth and want the user to see details on why access failed
196 $wgImgAuthPublicTest = true; ///< defaults to true - if public read is turned on, no need for img_auth, config error unless other access is used
199 * File repository structures
201 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
202 * an array of such structures. Each repository structure is an associative
203 * array of properties configuring the repository.
205 * Properties required for all repos:
206 * class The class name for the repository. May come from the core or an extension.
207 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
209 * name A unique name for the repository.
211 * For most core repos:
212 * url Base public URL
213 * hashLevels The number of directory levels for hash-based division of files
214 * thumbScriptUrl The URL for thumb.php (optional, not recommended)
215 * transformVia404 Whether to skip media file transformation on parse and rely on a 404
217 * initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
218 * determines whether filenames implicitly start with a capital letter.
219 * The current implementation may give incorrect description page links
220 * when the local $wgCapitalLinks and initialCapital are mismatched.
221 * pathDisclosureProtection
222 * May be 'paranoid' to remove all parameters from error messages, 'none' to
223 * leave the paths in unchanged, or 'simple' to replace paths with
224 * placeholders. Default for LocalRepo is 'simple'.
225 * fileMode This allows wikis to set the file mode when uploading/moving files. Default
227 * directory The local filesystem directory where public files are stored. Not used for
229 * thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
230 * thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
233 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
234 * for local repositories:
235 * descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
236 * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
237 * http://en.wikipedia.org/w
239 * articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
240 * fetchDescription Fetch the text of the remote file description page. Equivalent to
241 * $wgFetchCommonsDescriptions.
244 * dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
245 * equivalent to the corresponding member of $wgDBservers
246 * tablePrefix Table prefix, the foreign wiki's $wgDBprefix
247 * hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
250 * apibase Use for the foreign API's URL
251 * apiThumbCacheExpiry How long to locally cache thumbs for
253 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
254 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
256 $wgLocalFileRepo = false;
257 $wgForeignFileRepos = array();
261 * Use Commons as a remote file repository. Essentially a wrapper, when this
262 * is enabled $wgForeignFileRepos will point at Commons with a set of default
265 $wgUseInstantCommons = false;
268 * Allowed title characters -- regex character class
269 * Don't change this unless you know what you're doing
271 * Problematic punctuation:
272 * []{}|# Are needed for link syntax, never enable these
273 * <> Causes problems with HTML escaping, don't use
274 * % Enabled by default, minor problems with path to query rewrite rules, see below
275 * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
276 * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
278 * All three of these punctuation problems can be avoided by using an alias, instead of a
279 * rewrite rule of either variety.
281 * The problem with % is that when using a path to query rewrite rule, URLs are
282 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
283 * %253F, for example, becomes "?". Our code does not double-escape to compensate
284 * for this, indeed double escaping would break if the double-escaped title was
285 * passed in the query string rather than the path. This is a minor security issue
286 * because articles can be created such that they are hard to view or edit.
288 * In some rare cases you may wish to remove + for compatibility with old links.
290 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
291 * this breaks interlanguage links
293 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
294 $wgIllegalFileChars = ":"; // These are additional characters that should be replaced with '-' in file names
298 * The external URL protocols
300 $wgUrlProtocols = array(
306 'telnet://', // Well if we're going to support the above.. -ævar
307 'nntp://', // @bug 3808 RFC 1738
316 /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
317 * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
321 /** Configuration for different virus scanners. This an associative array of associative arrays:
322 * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
323 * valid values for $wgAntivirus are the keys defined in this array.
325 * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
327 * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
328 * file to scan. If not present, the filename will be appended to the command. Note that this must be
329 * overwritten if the scanner is not in the system path; in that case, plase set
330 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
332 * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
333 * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
334 * the file if $wgAntivirusRequired is not set.
335 * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
336 * which is probably imune to virusses. This causes the file to pass.
337 * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
338 * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
339 * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
341 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
342 * output. The relevant part should be matched as group one (\1).
343 * If not defined or the pattern does not match, the full message is shown to the user.
345 $wgAntivirusSetup = array(
349 'command' => "clamscan --no-summary ",
352 "0" => AV_NO_VIRUS
, # no virus
353 "1" => AV_VIRUS_FOUND
, # virus found
354 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
355 "*" => AV_SCAN_FAILED
, # else scan failed
358 'messagepattern' => '/.*?:(.*)/sim',
363 'command' => "f-prot ",
366 "0" => AV_NO_VIRUS
, # no virus
367 "3" => AV_VIRUS_FOUND
, # virus found
368 "6" => AV_VIRUS_FOUND
, # virus found
369 "*" => AV_SCAN_FAILED
, # else scan failed
372 'messagepattern' => '/.*?Infection:(.*)$/m',
377 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
378 $wgAntivirusRequired= true;
380 /** Determines if the mime type of uploaded files should be checked */
381 $wgVerifyMimeType= true;
383 /** Sets the mime type definition file to use by MimeMagic.php. */
384 $wgMimeTypeFile= "includes/mime.types";
385 #$wgMimeTypeFile= "/etc/mime.types";
386 #$wgMimeTypeFile= null; #use built-in defaults only.
388 /** Sets the mime type info file to use by MimeMagic.php. */
389 $wgMimeInfoFile= "includes/mime.info";
390 #$wgMimeInfoFile= null; #use built-in defaults only.
392 /** Switch for loading the FileInfo extension by PECL at runtime.
393 * This should be used only if fileinfo is installed as a shared object
394 * or a dynamic libary
396 $wgLoadFileinfoExtension= false;
398 /** Sets an external mime detector program. The command must print only
399 * the mime type to standard output.
400 * The name of the file to process will be appended to the command given here.
401 * If not set or NULL, mime_content_type will be used if available.
403 $wgMimeDetectorCommand= null; # use internal mime_content_type function, available since php 4.3.0
404 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
406 /** Switch for trivial mime detection. Used by thumb.php to disable all fance
407 * things, because only a few types of images are needed and file extensions
410 $wgTrivialMimeDetection= false;
413 * Additional XML types we can allow via mime-detection.
414 * array = ( 'rootElement' => 'associatedMimeType' )
416 $wgXMLMimeTypes = array(
417 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
418 'svg' => 'image/svg+xml',
419 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
420 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
421 'html' => 'text/html', // application/xhtml+xml?
425 * To set 'pretty' URL paths for actions other than
426 * plain page views, add to this array. For instance:
427 * 'edit' => "$wgScriptPath/edit/$1"
429 * There must be an appropriate script or rewrite rule
430 * in place to handle these URLs.
432 $wgActionPaths = array();
435 * If you operate multiple wikis, you can define a shared upload path here.
436 * Uploads to this wiki will NOT be put there - they will be put into
437 * $wgUploadDirectory.
438 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
439 * no file of the given name is found in the local repository (for [[Image:..]],
440 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
443 * Note that these configuration settings can now be defined on a per-
444 * repository basis for an arbitrary number of file repositories, using the
445 * $wgForeignFileRepos variable.
447 $wgUseSharedUploads = false;
448 /** Full path on the web server where shared uploads can be found */
449 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
450 /** Fetch commons image description pages and display them on the local wiki? */
451 $wgFetchCommonsDescriptions = false;
452 /** Path on the file system where shared uploads can be found. */
453 $wgSharedUploadDirectory = "/var/www/wiki3/images";
454 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
455 $wgSharedUploadDBname = false;
456 /** Optional table prefix used in database. */
457 $wgSharedUploadDBprefix = '';
458 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
459 $wgCacheSharedUploads = true;
461 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
462 * The timeout for copy uploads is set by $wgHTTPTimeout.
464 $wgAllowCopyUploads = false;
467 * Max size for uploads, in bytes. Applies to all uploads.
469 $wgMaxUploadSize = 1024*1024*100; # 100MB
472 * Point the upload navigation link to an external URL
473 * Useful if you want to use a shared repository by default
474 * without disabling local uploads (use $wgEnableUploads = false for that)
475 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
477 * This also affects images inline images that do not exist. In that case the URL will get
478 * (?|&)wpDestFile=<filename> appended to it as appropriate.
480 $wgUploadNavigationUrl = false;
483 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
484 * generating them on render and outputting a static URL. This is necessary if some of your
485 * apache servers don't have read/write access to the thumbnail path.
488 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
490 $wgThumbnailScriptPath = false;
491 $wgSharedThumbnailScriptPath = false;
494 * Set the following to false especially if you have a set of files that need to
495 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
498 $wgHashedSharedUploadDirectory = true;
501 * Base URL for a repository wiki. Leave this blank if uploads are just stored
502 * in a shared directory and not meant to be accessible through a separate wiki.
503 * Otherwise the image description pages on the local wiki will link to the
504 * image description page on this wiki.
506 * Please specify the namespace, as in the example below.
508 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
515 * Site admin email address
516 * Default to wikiadmin@SERVER_NAME
518 $wgEmergencyContact = 'wikiadmin@' . $wgServerName;
521 * Password reminder email address
522 * The address we should use as sender when a user is requesting his password
523 * Default to apache@SERVER_NAME
525 $wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
528 * dummy address which should be accepted during mail send action
529 * It might be necessay to adapt the address or to set it equal
530 * to the $wgEmergencyContact address
532 #$wgNoReplyAddress = $wgEmergencyContact;
533 $wgNoReplyAddress = 'reply@not.possible';
536 * Set to true to enable the e-mail basic features:
537 * Password reminders, etc. If sending e-mail on your
538 * server doesn't work, you might want to disable this.
540 $wgEnableEmail = true;
543 * Set to true to enable user-to-user e-mail.
544 * This can potentially be abused, as it's hard to track.
546 $wgEnableUserEmail = true;
549 * Set to true to put the sending user's email in a Reply-To header
550 * instead of From. ($wgEmergencyContact will be used as From.)
552 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
553 * which can cause problems with SPF validation and leak recipient addressses
554 * when bounces are sent to the sender.
556 $wgUserEmailUseReplyTo = false;
559 * Minimum time, in hours, which must elapse between password reminder
560 * emails for a given account. This is to prevent abuse by mail flooding.
562 $wgPasswordReminderResendTime = 24;
565 * The time, in seconds, when an emailed temporary password expires.
567 $wgNewPasswordExpiry = 3600 * 24 * 7;
571 * For using a direct (authenticated) SMTP server connection.
572 * Default to false or fill an array :
574 * "host" => 'SMTP domain',
575 * "IDHost" => 'domain for MessageID',
577 * "auth" => true/false,
578 * "username" => user,
579 * "password" => password
588 /** database host name or ip address */
589 $wgDBserver = 'localhost';
590 /** database port number (for PostgreSQL) */
592 /** name of the database */
593 $wgDBname = 'my_wiki';
595 $wgDBconnection = '';
596 /** Database username */
597 $wgDBuser = 'wikiuser';
598 /** Database user's password */
603 /** Separate username and password for maintenance tasks. Leave as null to use the default */
604 $wgDBadminuser = null;
605 $wgDBadminpassword = null;
608 * Leave as null to select the default search engine for the
609 * selected database type (eg SearchMySQL), or set to a class
610 * name to override to a custom search engine.
612 $wgSearchType = null;
614 /** Table name prefix */
616 /** MySQL table options to use during installation or update */
617 $wgDBTableOptions = 'ENGINE=InnoDB';
619 /** Mediawiki schema */
620 $wgDBmwschema = 'mediawiki';
621 /** Tsearch2 schema */
622 $wgDBts2schema = 'public';
624 /** To override default SQLite data directory ($docroot/../data) */
625 $wgSQLiteDataDir = '';
627 /** Default directory mode for SQLite data directory on creation.
628 * Note that this is different from the default directory mode used
631 $wgSQLiteDataDirMode = 0700;
634 * Make all database connections secretly go to localhost. Fool the load balancer
635 * thinking there is an arbitrarily large cluster of servers to connect to.
636 * Useful for debugging.
638 $wgAllDBsAreLocalhost = false;
643 * Shared database for multiple wikis. Commonly used for storing a user table
644 * for single sign-on. The server for this database must be the same as for the
646 * For backwards compatibility the shared prefix is set to the same as the local
647 * prefix, and the user table is listed in the default list of shared tables.
648 * The user_properties table is also added so that users will continue to have their
649 * preferences shared (preferences were stored in the user table prior to 1.16)
651 * $wgSharedTables may be customized with a list of tables to share in the shared
652 * datbase. However it is advised to limit what tables you do share as many of
653 * MediaWiki's tables may have side effects if you try to share them.
657 $wgSharedPrefix = false; # Defaults to $wgDBprefix
658 $wgSharedTables = array( 'user', 'user_properties' );
661 * Database load balancer
662 * This is a two-dimensional array, an array of server info structures
665 * dbname: Default database name
667 * password: DB password
668 * type: "mysql" or "postgres"
669 * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
670 * groupLoads: array of load ratios, the key is the query group name. A query may belong
671 * to several groups, the most specific group defined here is used.
674 * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
675 * DBO_DEBUG -- equivalent of $wgDebugDumpSql
676 * DBO_TRX -- wrap entire request in a transaction
677 * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
678 * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
680 * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
681 * max threads: (optional) Maximum number of running threads
683 * These and any other user-defined properties will be assigned to the mLBInfo member
684 * variable of the Database object.
686 * Leave at false to use the single-server variables above. If you set this
687 * variable, the single-server variables will generally be ignored (except
688 * perhaps in some command-line scripts).
690 * The first server listed in this array (with key 0) will be the master. The
691 * rest of the servers will be slaves. To prevent writes to your slaves due to
692 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
693 * slaves in my.cnf. You can set read_only mode at runtime using:
697 * Since the effect of writing to a slave is so damaging and difficult to clean
698 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
699 * our masters, and then set read_only=0 on masters at runtime.
701 $wgDBservers = false;
704 * Load balancer factory configuration
705 * To set up a multi-master wiki farm, set the class here to something that
706 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
707 * The class identified here is responsible for reading $wgDBservers,
708 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
710 * The LBFactory_Multi class is provided for this purpose, please see
711 * includes/db/LBFactory_Multi.php for configuration information.
713 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
715 /** How long to wait for a slave to catch up to the master */
716 $wgMasterWaitTimeout = 10;
718 /** File to log database errors to */
719 $wgDBerrorLog = false;
721 /** When to give an error message */
722 $wgDBClusterTimeout = 10;
725 * Scale load balancer polling time so that under overload conditions, the database server
726 * receives a SHOW STATUS query at an average interval of this many microseconds
728 $wgDBAvgStatusPoll = 2000;
730 /** Set to true if using InnoDB tables */
731 $wgDBtransactions = false;
732 /** Set to true for compatibility with extensions that might be checking.
733 * MySQL 3.23.x is no longer supported. */
737 * Set to true to engage MySQL 4.1/5.0 charset-related features;
738 * for now will just cause sending of 'SET NAMES=utf8' on connect.
740 * WARNING: THIS IS EXPERIMENTAL!
742 * May break if you're not using the table defs from mysql5/tables.sql.
743 * May break if you're upgrading an existing wiki if set differently.
744 * Broken symptoms likely to include incorrect behavior with page titles,
745 * usernames, comments etc containing non-ASCII characters.
746 * Might also cause failures on the object cache and other things.
748 * Even correct usage may cause failures with Unicode supplementary
749 * characters (those not in the Basic Multilingual Plane) unless MySQL
750 * has enhanced their Unicode support.
755 * Other wikis on this site, can be administered from a single developer
757 * Array numeric key => database name
759 $wgLocalDatabases = array();
762 * Object cache settings
763 * See Defines.php for types
765 $wgMainCacheType = CACHE_NONE
;
766 $wgMessageCacheType = CACHE_ANYTHING
;
767 $wgParserCacheType = CACHE_ANYTHING
;
770 $wgParserCacheExpireTime = 86400;
772 // Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
773 $wgDBAhandler = 'db3';
775 $wgSessionsInMemcached = false;
777 /** This is used for setting php's session.save_handler. In practice, you will
778 * almost never need to change this ever. Other options might be 'user' or
779 * 'session_mysql.' Setting to null skips setting this entirely (which might be
780 * useful if you're doing cross-application sessions, see bug 11381) */
781 $wgSessionHandler = 'files';
784 * Memcached-specific settings
785 * See docs/memcached.txt
787 $wgUseMemCached = false;
788 $wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
789 $wgMemCachedServers = array( '127.0.0.1:11000' );
790 $wgMemCachedPersistent = false;
791 $wgMemCachedTimeout = 100000; //Data timeout in microseconds
795 * Set this to true to make a local copy of the message cache, for use in
796 * addition to memcached. The files will be put in $wgCacheDirectory.
798 $wgUseLocalMessageCache = false;
801 * Defines format of local cache
802 * true - Serialized object
803 * false - PHP source file (Warning - security risk)
805 $wgLocalMessageCacheSerialized = true;
808 * Localisation cache configuration. Associative array with keys:
809 * class: The class to use. May be overridden by extensions.
811 * store: The location to store cache data. May be 'files', 'db' or
812 * 'detect'. If set to "files", data will be in CDB files. If set
813 * to "db", data will be stored to the database. If set to
814 * "detect", files will be used if $wgCacheDirectory is set,
815 * otherwise the database will be used.
817 * storeClass: The class name for the underlying storage. If set to a class
818 * name, it overrides the "store" setting.
820 * storeDirectory: If the store class puts its data in files, this is the
821 * directory it will use. If this is false, $wgCacheDirectory
824 * manualRecache: Set this to true to disable cache updates on web requests.
825 * Use maintenance/rebuildLocalisationCache.php instead.
827 $wgLocalisationCacheConf = array(
828 'class' => 'LocalisationCache',
830 'storeClass' => false,
831 'storeDirectory' => false,
832 'manualRecache' => false,
837 /** Site language code, should be one of ./languages/Language(.*).php */
838 $wgLanguageCode = 'en';
841 * Some languages need different word forms, usually for different cases.
842 * Used in Language::convertGrammar().
844 $wgGrammarForms = array();
845 #$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
847 /** Treat language links as magic connectors, not inline links */
848 $wgInterwikiMagic = true;
850 /** Hide interlanguage links from the sidebar */
851 $wgHideInterlanguageLinks = false;
853 /** List of language names or overrides for default names in Names.php */
854 $wgExtraLanguageNames = array();
857 * List of language codes that don't correspond to an actual language.
858 * These codes are leftoffs from renames, or other legacy things.
859 * Also, qqq is a dummy "language" for documenting messages.
861 $wgDummyLanguageCodes = array( 'qqq', 'als', 'be-x-old', 'dk', 'fiu-vro', 'iu', 'nb', 'simple', 'tp' );
863 /** We speak UTF-8 all the time now, unless some oddities happen */
864 $wgInputEncoding = 'UTF-8';
865 $wgOutputEncoding = 'UTF-8';
866 $wgEditEncoding = '';
869 * Set this to true to replace Arabic presentation forms with their standard
870 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
873 * Note that pages with titles containing presentation forms will become
874 * inaccessible, run maintenance/cleanupTitles.php to fix this.
876 $wgFixArabicUnicode = true;
879 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
880 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
881 * set to "ml". Note that some clients (even new clients as of 2010) do not
882 * support these characters.
884 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
885 * fix any ZWJ sequences in existing page titles.
887 $wgFixMalayalamUnicode = true;
890 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
891 * For Unix-like operating systems, set this to to a locale that has a UTF-8
892 * character set. Only the character set is relevant.
894 $wgShellLocale = 'en_US.utf8';
897 * Set this to eg 'ISO-8859-1' to perform character set
898 * conversion when loading old revisions not marked with
899 * "utf-8" flag. Use this when converting wiki to UTF-8
900 * without the burdensome mass conversion of old text data.
902 * NOTE! This DOES NOT touch any fields other than old_text.
903 * Titles, comments, user names, etc still must be converted
904 * en masse in the database before continuing as a UTF-8 wiki.
906 $wgLegacyEncoding = false;
909 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
910 * create stub reference rows in the text table instead of copying
911 * the full text of all current entries from 'cur' to 'text'.
913 * This will speed up the conversion step for large sites, but
914 * requires that the cur table be kept around for those revisions
915 * to remain viewable.
917 * maintenance/migrateCurStubs.php can be used to complete the
918 * migration in the background once the wiki is back online.
920 * This option affects the updaters *only*. Any present cur stub
921 * revisions will be readable at runtime regardless of this setting.
923 $wgLegacySchemaConversion = false;
925 $wgMimeType = 'text/html';
926 $wgJsMimeType = 'text/javascript';
927 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
928 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
929 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
932 * Should we output an HTML5 doctype? This mode is still experimental, but
933 * all indications are that it should be usable, so it's enabled by default.
934 * If all goes well, it will be removed and become always true before the 1.16
940 * Defines the value of the version attribute in the <html> tag, if any.
941 * Will be initialized later if not set explicitly.
943 $wgHtml5Version = null;
946 * Enabled RDFa attributes for use in wikitext.
947 * NOTE: Interaction with HTML5 is somewhat underspecified.
949 $wgAllowRdfaAttributes = false;
952 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
954 $wgAllowMicrodataAttributes = false;
957 * Should we try to make our HTML output well-formed XML? If set to false,
958 * output will be a few bytes shorter, and the HTML will arguably be more
959 * readable. If set to true, life will be much easier for the authors of
960 * screen-scraping bots, and the HTML will arguably be more readable.
962 * Setting this to false may omit quotation marks on some attributes, omit
963 * slashes from some self-closing tags, omit some ending tags, etc., where
964 * permitted by HTML5. Setting it to true will not guarantee that all pages
965 * will be well-formed, although non-well-formed pages should be rare and it's
966 * a bug if you find one. Conversely, setting it to false doesn't mean that
967 * all XML-y constructs will be omitted, just that they might be.
969 * Because of compatibility with screen-scraping bots, and because it's
970 * controversial, this is currently left to true by default.
972 $wgWellFormedXml = true;
975 * Permit other namespaces in addition to the w3.org default.
976 * Use the prefix for the key and the namespace for the value. For
978 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
979 * Normally we wouldn't have to define this in the root <html>
980 * element, but IE needs it there in some circumstances.
982 $wgXhtmlNamespaces = array();
984 /** Enable to allow rewriting dates in page text.
985 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
986 $wgUseDynamicDates = false;
987 /** Enable dates like 'May 12' instead of '12 May', this only takes effect if
988 * the interface is set to English
990 $wgAmericanDates = false;
992 * For Hindi and Arabic use local numerals instead of Western style (0-9)
993 * numerals in interface.
995 $wgTranslateNumerals = true;
998 * Translation using MediaWiki: namespace.
999 * Interface messages will be loaded from the database.
1001 $wgUseDatabaseMessages = true;
1004 * Expiry time for the message cache key
1006 $wgMsgCacheExpiry = 86400;
1009 * Maximum entry size in the message cache, in bytes
1011 $wgMaxMsgCacheEntrySize = 10000;
1014 * If true, serialized versions of the messages arrays will be
1015 * read from the 'serialized' subdirectory if they are present.
1016 * Set to false to always use the Messages files, regardless of
1017 * whether they are up to date or not.
1019 $wgEnableSerializedMessages = true;
1022 * Set to false if you are thorough system admin who always remembers to keep
1023 * serialized files up to date to save few mtime calls.
1025 $wgCheckSerialized = true;
1027 /** Whether to enable language variant conversion. */
1028 $wgDisableLangConversion = false;
1030 /** Whether to enable language variant conversion for links. */
1031 $wgDisableTitleConversion = false;
1033 /** Default variant code, if false, the default will be the language code */
1034 $wgDefaultLanguageVariant = false;
1036 /** Disabled variants array of language variant conversion.
1038 * $wgDisabledVariants[] = 'zh-mo';
1039 * $wgDisabledVariants[] = 'zh-my';
1042 * $wgDisabledVariants = array('zh-mo', 'zh-my');
1044 $wgDisabledVariants = array();
1047 * Like $wgArticlePath, but on multi-variant wikis, this provides a
1048 * path format that describes which parts of the URL contain the
1049 * language variant. For Example:
1051 * $wgLanguageCode = 'sr';
1052 * $wgVariantArticlePath = '/$2/$1';
1053 * $wgArticlePath = '/wiki/$1';
1055 * A link to /wiki/ would be redirected to /sr/Главна_страна
1057 * It is important that $wgArticlePath not overlap with possible values
1058 * of $wgVariantArticlePath.
1060 $wgVariantArticlePath = false;///< defaults to false
1063 * Show a bar of language selection links in the user login and user
1064 * registration forms; edit the "loginlanguagelinks" message to
1067 $wgLoginLanguageSelector = false;
1070 * Whether to use zhdaemon to perform Chinese text processing
1071 * zhdaemon is under developement, so normally you don't want to
1072 * use it unless for testing
1074 $wgUseZhdaemon = false;
1075 $wgZhdaemonHost="localhost";
1076 $wgZhdaemonPort=2004;
1079 # Miscellaneous configuration settings
1082 $wgLocalInterwiki = 'w';
1083 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
1085 /** Interwiki caching settings.
1086 $wgInterwikiCache specifies path to constant database file
1087 This cdb database is generated by dumpInterwiki from maintenance
1088 and has such key formats:
1089 dbname:key - a simple key (e.g. enwiki:meta)
1090 _sitename:key - site-scope key (e.g. wiktionary:meta)
1091 __global:key - global-scope key (e.g. __global:meta)
1092 __sites:dbname - site mapping (e.g. __sites:enwiki)
1093 Sites mapping just specifies site name, other keys provide
1094 "local url" data layout.
1095 $wgInterwikiScopes specify number of domains to check for messages:
1096 1 - Just wiki(db)-level
1097 2 - wiki and global levels
1099 $wgInterwikiFallbackSite - if unable to resolve from cache
1101 $wgInterwikiCache = false;
1102 $wgInterwikiScopes = 3;
1103 $wgInterwikiFallbackSite = 'wiki';
1106 * If local interwikis are set up which allow redirects,
1107 * set this regexp to restrict URLs which will be displayed
1108 * as 'redirected from' links.
1110 * It might look something like this:
1111 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
1113 * Leave at false to avoid displaying any incoming redirect markers.
1114 * This does not affect intra-wiki redirects, which don't change
1117 $wgRedirectSources = false;
1120 $wgShowIPinHeader = true; # For non-logged in users
1121 $wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
1122 $wgMaxArticleSize = 2048; # Maximum article size in kilobytes
1123 # Maximum number of bytes in username. You want to run the maintenance
1124 # script ./maintenance/checkUsernames.php once you have changed this value
1125 $wgMaxNameChars = 255;
1127 $wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
1130 * Maximum recursion depth for templates within templates.
1131 * The current parser adds two levels to the PHP call stack for each template,
1132 * and xdebug limits the call stack to 100 by default. So this should hopefully
1133 * stop the parser before it hits the xdebug limit.
1135 $wgMaxTemplateDepth = 40;
1136 $wgMaxPPExpandDepth = 40;
1139 * If true, removes (substitutes) templates in "~~~~" signatures.
1141 $wgCleanSignatures = true;
1143 $wgExtraSubtitle = '';
1144 $wgSiteSupportPage = ''; # A page where you users can receive donations
1147 * Set this to a string to put the wiki into read-only mode. The text will be
1148 * used as an explanation to users.
1150 * This prevents most write operations via the web interface. Cache updates may
1151 * still be possible. To prevent database writes completely, use the read_only
1157 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
1158 * Its contents will be shown to users as part of the read-only warning
1161 $wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
1164 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
1165 * The debug log file should be not be publicly accessible if it is used, as it
1166 * may contain private data.
1168 $wgDebugLogFile = '';
1171 * Prefix for debug log lines
1173 $wgDebugLogPrefix = '';
1176 * If true, instead of redirecting, show a page with a link to the redirect
1177 * destination. This allows for the inspection of PHP error messages, and easy
1178 * resubmission of form data. For developer use only.
1180 $wgDebugRedirects = false;
1183 * If true, log debugging data from action=raw.
1184 * This is normally false to avoid overlapping debug entries due to gen=css and
1187 $wgDebugRawPage = false;
1190 * Send debug data to an HTML comment in the output.
1192 * This may occasionally be useful when supporting a non-technical end-user. It's
1193 * more secure than exposing the debug log file to the web, since the output only
1194 * contains private data for the current user. But it's not ideal for development
1195 * use since data is lost on fatal errors and redirects.
1197 $wgDebugComments = false;
1200 * Write SQL queries to the debug log
1202 $wgDebugDumpSql = false;
1205 * Set to an array of log group keys to filenames.
1206 * If set, wfDebugLog() output for that group will go to that file instead
1207 * of the regular $wgDebugLogFile. Useful for enabling selective logging
1210 $wgDebugLogGroups = array();
1213 * Display debug data at the bottom of the main content area.
1215 * Useful for developers and technical users trying to working on a closed wiki.
1217 $wgShowDebug = false;
1220 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
1222 $wgDebugTimestamps = false;
1225 * Print HTTP headers for every request in the debug information.
1227 $wgDebugPrintHttpHeaders = true;
1230 * Show the contents of $wgHooks in Special:Version
1232 $wgSpecialVersionShowHooks = false;
1235 * Whether to show "we're sorry, but there has been a database error" pages.
1236 * Displaying errors aids in debugging, but may display information useful
1239 $wgShowSQLErrors = false;
1242 * If true, some error messages will be colorized when running scripts on the
1243 * command line; this can aid picking important things out when debugging.
1244 * Ignored when running on Windows or when output is redirected to a file.
1246 $wgColorErrors = true;
1249 * If set to true, uncaught exceptions will print a complete stack trace
1250 * to output. This should only be used for debugging, as it may reveal
1251 * private information in function parameters due to PHP's backtrace
1254 $wgShowExceptionDetails = false;
1257 * If true, show a backtrace for database errors
1259 $wgShowDBErrorBacktrace = false;
1262 * Expose backend server host names through the API and various HTML comments
1264 $wgShowHostnames = false;
1267 * If set to true MediaWiki will throw notices for some possible error
1268 * conditions and for deprecated functions.
1270 $wgDevelopmentWarnings = false;
1273 * Use experimental, DMOZ-like category browser
1275 $wgUseCategoryBrowser = false;
1278 * Keep parsed pages in a cache (objectcache table or memcached)
1279 * to speed up output of the same page viewed by another user with the
1282 * This can provide a significant speedup for medium to large pages,
1283 * so you probably want to keep it on. Extensions that conflict with the
1284 * parser cache should disable the cache on a per-page basis instead.
1286 $wgEnableParserCache = true;
1289 * Append a configured value to the parser cache and the sitenotice key so
1290 * that they can be kept separate for some class of activity.
1292 $wgRenderHashAppend = '';
1295 * If on, the sidebar navigation links are cached for users with the
1296 * current language set. This can save a touch of load on a busy site
1297 * by shaving off extra message lookups.
1299 * However it is also fragile: changing the site configuration, or
1300 * having a variable $wgArticlePath, can produce broken links that
1301 * don't update as expected.
1303 $wgEnableSidebarCache = false;
1306 * Expiry time for the sidebar cache, in seconds
1308 $wgSidebarCacheExpiry = 86400;
1311 * Under which condition should a page in the main namespace be counted
1312 * as a valid article? If $wgUseCommaCount is set to true, it will be
1313 * counted if it contains at least one comma. If it is set to false
1314 * (default), it will only be counted if it contains at least one [[wiki
1315 * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
1317 * Retroactively changing this variable will not affect
1318 * the existing count (cf. maintenance/recount.sql).
1320 $wgUseCommaCount = false;
1323 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
1324 * values are easier on the database. A value of 1 causes the counters to be
1325 * updated on every hit, any higher value n cause them to update *on average*
1326 * every n hits. Should be set to either 1 or something largish, eg 1000, for
1327 * maximum efficiency.
1329 $wgHitcounterUpdateFreq = 1;
1331 # Basic user rights and block settings
1332 $wgSysopUserBans = true; # Allow sysops to ban logged-in users
1333 $wgSysopRangeBans = true; # Allow sysops to ban IP ranges
1334 $wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
1335 $wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
1336 $wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
1337 $wgBlockCIDRLimit = array(
1338 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
1339 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
1343 * If true, blocked users will not be allowed to login. When using this with
1344 * a public wiki, the effect of logging out blocked users may actually be
1345 * avers: unless the user's address is also blocked (e.g. auto-block),
1346 * logging the user out will again allow reading and editing, just as for
1347 * anonymous visitors.
1349 $wgBlockDisablesLogin = false; #
1351 # Pages anonymous user may see as an array, e.g.:
1352 # array ( "Main Page", "Wikipedia:Help");
1353 # Special:Userlogin and Special:Resetpass are always whitelisted.
1354 # NOTE: This will only work if $wgGroupPermissions['*']['read']
1355 # is false -- see below. Otherwise, ALL pages are accessible,
1356 # regardless of this setting.
1357 # Also note that this will only protect _pages in the wiki_.
1358 # Uploaded files will remain readable. Make your upload
1359 # directory name unguessable, or use .htaccess to protect it.
1360 $wgWhitelistRead = false;
1363 * Should editors be required to have a validated e-mail
1364 * address before being allowed to edit?
1366 $wgEmailConfirmToEdit=false;
1369 * Permission keys given to users in each group.
1370 * All users are implicitly in the '*' group including anonymous visitors;
1371 * logged-in users are all implicitly in the 'user' group. These will be
1372 * combined with the permissions of all groups that a given user is listed
1373 * in in the user_groups table.
1375 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
1376 * doing! This will wipe all permissions, and may mean that your users are
1377 * unable to perform certain essential tasks or access new functionality
1378 * when new permissions are introduced and default grants established.
1380 * Functionality to make pages inaccessible has not been extensively tested
1381 * for security. Use at your own risk!
1383 * This replaces wgWhitelistAccount and wgWhitelistEdit
1385 $wgGroupPermissions = array();
1387 // Implicit group for all visitors
1388 $wgGroupPermissions['*']['createaccount'] = true;
1389 $wgGroupPermissions['*']['read'] = true;
1390 $wgGroupPermissions['*']['edit'] = true;
1391 $wgGroupPermissions['*']['createpage'] = true;
1392 $wgGroupPermissions['*']['createtalk'] = true;
1393 $wgGroupPermissions['*']['writeapi'] = true;
1394 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
1396 // Implicit group for all logged-in accounts
1397 $wgGroupPermissions['user']['move'] = true;
1398 $wgGroupPermissions['user']['move-subpages'] = true;
1399 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
1400 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
1401 $wgGroupPermissions['user']['read'] = true;
1402 $wgGroupPermissions['user']['edit'] = true;
1403 $wgGroupPermissions['user']['createpage'] = true;
1404 $wgGroupPermissions['user']['createtalk'] = true;
1405 $wgGroupPermissions['user']['writeapi'] = true;
1406 $wgGroupPermissions['user']['upload'] = true;
1407 $wgGroupPermissions['user']['reupload'] = true;
1408 $wgGroupPermissions['user']['reupload-shared'] = true;
1409 $wgGroupPermissions['user']['minoredit'] = true;
1410 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
1411 $wgGroupPermissions['user']['sendemail'] = true;
1413 // Implicit group for accounts that pass $wgAutoConfirmAge
1414 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
1416 // Users with bot privilege can have their edits hidden
1417 // from various log pages by default
1418 $wgGroupPermissions['bot']['bot'] = true;
1419 $wgGroupPermissions['bot']['autoconfirmed'] = true;
1420 $wgGroupPermissions['bot']['nominornewtalk'] = true;
1421 $wgGroupPermissions['bot']['autopatrol'] = true;
1422 $wgGroupPermissions['bot']['suppressredirect'] = true;
1423 $wgGroupPermissions['bot']['apihighlimits'] = true;
1424 $wgGroupPermissions['bot']['writeapi'] = true;
1425 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
1427 // Most extra permission abilities go to this group
1428 $wgGroupPermissions['sysop']['block'] = true;
1429 $wgGroupPermissions['sysop']['createaccount'] = true;
1430 $wgGroupPermissions['sysop']['delete'] = true;
1431 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
1432 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
1433 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
1434 $wgGroupPermissions['sysop']['undelete'] = true;
1435 $wgGroupPermissions['sysop']['editinterface'] = true;
1436 $wgGroupPermissions['sysop']['editusercss'] = true;
1437 $wgGroupPermissions['sysop']['edituserjs'] = true;
1438 $wgGroupPermissions['sysop']['import'] = true;
1439 $wgGroupPermissions['sysop']['importupload'] = true;
1440 $wgGroupPermissions['sysop']['move'] = true;
1441 $wgGroupPermissions['sysop']['move-subpages'] = true;
1442 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
1443 $wgGroupPermissions['sysop']['patrol'] = true;
1444 $wgGroupPermissions['sysop']['autopatrol'] = true;
1445 $wgGroupPermissions['sysop']['protect'] = true;
1446 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
1447 $wgGroupPermissions['sysop']['rollback'] = true;
1448 $wgGroupPermissions['sysop']['trackback'] = true;
1449 $wgGroupPermissions['sysop']['upload'] = true;
1450 $wgGroupPermissions['sysop']['reupload'] = true;
1451 $wgGroupPermissions['sysop']['reupload-shared'] = true;
1452 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
1453 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
1454 $wgGroupPermissions['sysop']['upload_by_url'] = true;
1455 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
1456 $wgGroupPermissions['sysop']['blockemail'] = true;
1457 $wgGroupPermissions['sysop']['markbotedits'] = true;
1458 $wgGroupPermissions['sysop']['apihighlimits'] = true;
1459 $wgGroupPermissions['sysop']['browsearchive'] = true;
1460 $wgGroupPermissions['sysop']['noratelimit'] = true;
1461 $wgGroupPermissions['sysop']['versiondetail'] = true;
1462 $wgGroupPermissions['sysop']['movefile'] = true;
1463 $wgGroupPermissions['sysop']['unblockself'] = true;
1464 #$wgGroupPermissions['sysop']['mergehistory'] = true;
1466 // Permission to change users' group assignments
1467 $wgGroupPermissions['bureaucrat']['userrights'] = true;
1468 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
1469 // Permission to change users' groups assignments across wikis
1470 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
1471 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
1472 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
1474 #$wgGroupPermissions['sysop']['deleterevision'] = true;
1475 // To hide usernames from users and Sysops
1476 #$wgGroupPermissions['suppress']['hideuser'] = true;
1477 // To hide revisions/log items from users and Sysops
1478 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
1479 // For private suppression log access
1480 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
1483 * The developer group is deprecated, but can be activated if need be
1484 * to use the 'lockdb' and 'unlockdb' special pages. Those require
1485 * that a lock file be defined and creatable/removable by the web
1488 # $wgGroupPermissions['developer']['siteadmin'] = true;
1491 * Permission keys revoked from users in each group.
1492 * This acts the same way as wgGroupPermissions above, except that
1493 * if the user is in a group here, the permission will be removed from them.
1495 * Improperly setting this could mean that your users will be unable to perform
1496 * certain essential tasks, so use at your own risk!
1498 $wgRevokePermissions = array();
1501 * Implicit groups, aren't shown on Special:Listusers or somewhere else
1503 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
1506 * A map of group names that the user is in, to group names that those users
1507 * are allowed to add or revoke.
1509 * Setting the list of groups to add or revoke to true is equivalent to "any group".
1511 * For example, to allow sysops to add themselves to the "bot" group:
1513 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
1515 * Implicit groups may be used for the source group, for instance:
1517 * $wgGroupsRemoveFromSelf = array( '*' => true );
1519 * This allows users in the '*' group (i.e. any user) to remove themselves from
1520 * any group that they happen to be in.
1523 $wgGroupsAddToSelf = array();
1524 $wgGroupsRemoveFromSelf = array();
1527 * Set of available actions that can be restricted via action=protect
1528 * You probably shouldn't change this.
1529 * Translated through restriction-* messages.
1531 $wgRestrictionTypes = array( 'edit', 'move' );
1534 * Rights which can be required for each protection level (via action=protect)
1536 * You can add a new protection level that requires a specific
1537 * permission by manipulating this array. The ordering of elements
1538 * dictates the order on the protection form's lists.
1540 * '' will be ignored (i.e. unprotected)
1541 * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
1543 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
1546 * Set the minimum permissions required to edit pages in each
1547 * namespace. If you list more than one permission, a user must
1548 * have all of them to edit pages in that namespace.
1550 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
1552 $wgNamespaceProtection = array();
1555 * Pages in namespaces in this array can not be used as templates.
1556 * Elements must be numeric namespace ids.
1557 * Among other things, this may be useful to enforce read-restrictions
1558 * which may otherwise be bypassed by using the template machanism.
1560 $wgNonincludableNamespaces = array();
1563 * Number of seconds an account is required to age before
1564 * it's given the implicit 'autoconfirm' group membership.
1565 * This can be used to limit privileges of new accounts.
1567 * Accounts created by earlier versions of the software
1568 * may not have a recorded creation date, and will always
1569 * be considered to pass the age test.
1571 * When left at 0, all registered accounts will pass.
1573 $wgAutoConfirmAge = 0;
1574 //$wgAutoConfirmAge = 600; // ten minutes
1575 //$wgAutoConfirmAge = 3600*24; // one day
1577 # Number of edits an account requires before it is autoconfirmed
1578 # Passing both this AND the time requirement is needed
1579 $wgAutoConfirmCount = 0;
1580 //$wgAutoConfirmCount = 50;
1583 * Automatically add a usergroup to any user who matches certain conditions.
1585 * array( '&' or '|' or '^', cond1, cond2, ... )
1586 * where cond1, cond2, ... are themselves conditions; *OR*
1587 * APCOND_EMAILCONFIRMED, *OR*
1588 * array( APCOND_EMAILCONFIRMED ), *OR*
1589 * array( APCOND_EDITCOUNT, number of edits ), *OR*
1590 * array( APCOND_AGE, seconds since registration ), *OR*
1591 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
1592 * array( APCOND_ISIP, ip ), *OR*
1593 * array( APCOND_IPINRANGE, range ), *OR*
1594 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
1595 * array( APCOND_BLOCKED ), *OR*
1596 * similar constructs defined by extensions.
1598 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
1599 * user who has provided an e-mail address.
1601 $wgAutopromote = array(
1602 'autoconfirmed' => array( '&',
1603 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
1604 array( APCOND_AGE
, &$wgAutoConfirmAge ),
1609 * These settings can be used to give finer control over who can assign which
1610 * groups at Special:Userrights. Example configuration:
1612 * // Bureaucrat can add any group
1613 * $wgAddGroups['bureaucrat'] = true;
1614 * // Bureaucrats can only remove bots and sysops
1615 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
1616 * // Sysops can make bots
1617 * $wgAddGroups['sysop'] = array( 'bot' );
1618 * // Sysops can disable other sysops in an emergency, and disable bots
1619 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
1621 $wgAddGroups = array();
1622 $wgRemoveGroups = array();
1625 * A list of available rights, in addition to the ones defined by the core.
1626 * For extensions only.
1628 $wgAvailableRights = array();
1631 * Optional to restrict deletion of pages with higher revision counts
1632 * to users with the 'bigdelete' permission. (Default given to sysops.)
1634 $wgDeleteRevisionsLimit = 0;
1636 # Proxy scanner settings
1640 * If you enable this, every editor's IP address will be scanned for open HTTP
1643 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
1644 * ISP and ask for your server to be shut down.
1646 * You have been warned.
1648 $wgBlockOpenProxies = false;
1649 /** Port we want to scan for a proxy */
1650 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
1651 /** Script used to scan */
1652 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
1654 $wgProxyMemcExpiry = 86400;
1655 /** This should always be customised in LocalSettings.php */
1656 $wgSecretKey = false;
1657 /** big list of banned IP addresses, in the keys not the values */
1658 $wgProxyList = array();
1660 $wgProxyKey = false;
1662 /** Number of accounts each IP address may create, 0 to disable.
1663 * Requires memcached */
1664 $wgAccountCreationThrottle = 0;
1666 # Client-side caching:
1668 /** Allow client-side caching of pages */
1669 $wgCachePages = true;
1672 * Set this to current time to invalidate all prior cached pages. Affects both
1673 * client- and server-side caching.
1674 * You can get the current date on your server by using the command:
1675 * date +%Y%m%d%H%M%S
1677 $wgCacheEpoch = '20030516000000';
1680 * Bump this number when changing the global style sheets and JavaScript.
1681 * It should be appended in the query string of static CSS and JS includes,
1682 * to ensure that client-side caches do not keep obsolete copies of global
1685 $wgStyleVersion = '270';
1688 # Server-side caching:
1691 * This will cache static pages for non-logged-in users to reduce
1692 * database traffic on public sites.
1693 * Must set $wgShowIPinHeader = false
1695 $wgUseFileCache = false;
1697 /** Directory where the cached page will be saved */
1698 $wgFileCacheDirectory = false; ///< defaults to "$wgCacheDirectory/html";
1701 * When using the file cache, we can store the cached HTML gzipped to save disk
1702 * space. Pages will then also be served compressed to clients that support it.
1703 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1704 * the default LocalSettings.php! If you enable this, remove that setting first.
1706 * Requires zlib support enabled in PHP.
1710 /** Whether MediaWiki should send an ETag header */
1713 # Email notification settings
1716 /** For email notification on page changes */
1717 $wgPasswordSender = $wgEmergencyContact;
1719 # true: from page editor if s/he opted-in
1720 # false: Enotif mails appear to come from $wgEmergencyContact
1721 $wgEnotifFromEditor = false;
1723 // TODO move UPO to preferences probably ?
1724 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1725 # If set to false, the corresponding input form on the user preference page is suppressed
1726 # It call this to be a "user-preferences-option (UPO)"
1727 $wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
1728 $wgEnotifWatchlist = false; # UPO
1729 $wgEnotifUserTalk = false; # UPO
1730 $wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
1731 $wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
1732 # # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
1734 # Send a generic mail instead of a personalised mail for each user. This
1735 # always uses UTC as the time zone, and doesn't include the username.
1737 # For pages with many users watching, this can significantly reduce mail load.
1738 # Has no effect when using sendmail rather than SMTP;
1740 $wgEnotifImpersonal = false;
1742 # Maximum number of users to mail at once when using impersonal mail. Should
1743 # match the limit on your mail server.
1744 $wgEnotifMaxRecips = 500;
1746 # Send mails via the job queue.
1747 $wgEnotifUseJobQ = false;
1749 # Use real name instead of username in e-mail "from" field
1750 $wgEnotifUseRealName = false;
1753 * Array of usernames who will be sent a notification email for every change which occurs on a wiki
1755 $wgUsersNotifiedOnAllChanges = array();
1757 /** Show watching users in recent changes, watchlist and page history views */
1758 $wgRCShowWatchingUsers = false; # UPO
1759 /** Show watching users in Page views */
1760 $wgPageShowWatchingUsers = false;
1761 /** Show the amount of changed characters in recent changes */
1762 $wgRCShowChangedSize = true;
1765 * If the difference between the character counts of the text
1766 * before and after the edit is below that value, the value will be
1767 * highlighted on the RC page.
1769 $wgRCChangedSizeThreshold = 500;
1772 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
1773 * view for watched pages with new changes */
1774 $wgShowUpdatedMarker = true;
1777 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
1779 $wgCookieExpiration = 30*86400;
1781 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1782 * problems when the user requests two pages within a short period of time. This
1783 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1786 $wgClockSkewFudge = 5;
1788 # Squid-related settings
1791 /** Enable/disable Squid */
1792 $wgUseSquid = false;
1794 /** If you run Squid3 with ESI support, enable this (default:false): */
1797 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1800 /** Internal server name as known to Squid, if different */
1801 # $wgInternalServer = 'http://yourinternal.tld:8000';
1802 $wgInternalServer = $wgServer;
1805 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1806 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1807 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1810 $wgSquidMaxage = 18000;
1813 * Default maximum age for raw CSS/JS accesses
1815 $wgForcedRawSMaxage = 300;
1818 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1820 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1821 * headers sent/modified from these proxies when obtaining the remote IP address
1823 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1825 $wgSquidServers = array();
1828 * As above, except these servers aren't purged on page changes; use to set a
1829 * list of trusted proxies, etc.
1831 $wgSquidServersNoPurge = array();
1833 /** Maximum number of titles to purge in any one client operation */
1834 $wgMaxSquidPurgeTitles = 400;
1836 /** HTCP multicast purging */
1838 $wgHTCPMulticastTTL = 1;
1839 # $wgHTCPMulticastAddress = "224.0.0.85";
1840 $wgHTCPMulticastAddress = false;
1842 /** Should forwarded Private IPs be accepted? */
1843 $wgUsePrivateIPs = false;
1848 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
1849 * or ".any.subdomain.net"
1851 $wgCookieDomain = '';
1852 $wgCookiePath = '/';
1853 $wgCookieSecure = ($wgProto == 'https');
1854 $wgDisableCookieCheck = false;
1857 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
1858 * using the database name.
1860 $wgCookiePrefix = false;
1863 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
1864 * in browsers that support this feature. This can mitigates some classes of
1867 * Only supported on PHP 5.2 or higher.
1869 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
1872 * If the requesting browser matches a regex in this blacklist, we won't
1873 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
1875 $wgHttpOnlyBlacklist = array(
1876 // Internet Explorer for Mac; sometimes the cookies work, sometimes
1877 // they don't. It's difficult to predict, as combinations of path
1878 // and expiration options affect its parsing.
1879 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1882 /** A list of cookies that vary the cache (for use by extensions) */
1883 $wgCacheVaryCookies = array();
1885 /** Override to customise the session name */
1886 $wgSessionName = false;
1888 /** Whether to allow inline image pointing to other websites */
1889 $wgAllowExternalImages = false;
1891 /** If the above is false, you can specify an exception here. Image URLs
1892 * that start with this string are then rendered, while all others are not.
1893 * You can use this to set up a trusted, simple repository of images.
1894 * You may also specify an array of strings to allow multiple sites
1897 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
1898 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
1900 $wgAllowExternalImagesFrom = '';
1902 /** If $wgAllowExternalImages is false, you can allow an on-wiki
1903 * whitelist of regular expression fragments to match the image URL
1904 * against. If the image matches one of the regular expression fragments,
1905 * The image will be displayed.
1907 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
1908 * Or false to disable it
1910 $wgEnableImageWhitelist = true;
1912 /** Allows to move images and other media files */
1913 $wgAllowImageMoving = true;
1915 /** Disable database-intensive features */
1916 $wgMiserMode = false;
1917 /** Disable all query pages if miser mode is on, not just some */
1918 $wgDisableQueryPages = false;
1919 /** Number of rows to cache in 'querycache' table when miser mode is on */
1920 $wgQueryCacheLimit = 1000;
1921 /** Number of links to a page required before it is deemed "wanted" */
1922 $wgWantedPagesThreshold = 1;
1923 /** Enable slow parser functions */
1924 $wgAllowSlowParserFunctions = false;
1927 * Maps jobs to their handling classes; extensions
1928 * can add to this to provide custom jobs
1930 $wgJobClasses = array(
1931 'refreshLinks' => 'RefreshLinksJob',
1932 'refreshLinks2' => 'RefreshLinksJob2',
1933 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
1934 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
1935 'sendMail' => 'EmaillingJob',
1936 'enotifNotify' => 'EnotifNotifyJob',
1937 'fixDoubleRedirect' => 'DoubleRedirectJob',
1941 * Additional functions to be performed with updateSpecialPages.
1942 * Expensive Querypages are already updated.
1944 $wgSpecialPageCacheUpdates = array(
1945 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
1949 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
1950 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
1951 * (ImageMagick) installed and available in the PATH.
1952 * Please see math/README for more information.
1955 /** Location of the texvc binary */
1956 $wgTexvc = './math/texvc';
1958 * Texvc background color
1959 * use LaTeX color format as used in \special function
1960 * for transparent background use value 'Transparent' for alpha transparency or
1961 * 'transparent' for binary transparency.
1963 $wgTexvcBackgroundColor = 'transparent';
1966 * Normally when generating math images, we double-check that the
1967 * directories we want to write to exist, and that files that have
1968 * been generated still exist when we need to bring them up again.
1970 * This lets us give useful error messages in case of permission
1971 * problems, and automatically rebuild images that have been lost.
1973 * On a big site with heavy NFS traffic this can be slow and flaky,
1974 * so sometimes we want to short-circuit it by setting this to false.
1976 $wgMathCheckFiles = true;
1979 # Profiling / debugging
1981 # You have to create a 'profiling' table in your database before using
1982 # profiling see maintenance/archives/patch-profiling.sql .
1984 # To enable profiling, edit StartProfiler.php
1986 /** Only record profiling info for pages that took longer than this */
1987 $wgProfileLimit = 0.0;
1988 /** Don't put non-profiling info into log file */
1989 $wgProfileOnly = false;
1990 /** Log sums from profiling into "profiling" table in db. */
1991 $wgProfileToDatabase = false;
1992 /** If true, print a raw call tree instead of per-function report */
1993 $wgProfileCallTree = false;
1994 /** Should application server host be put into profiling table */
1995 $wgProfilePerHost = false;
1997 /** Settings for UDP profiler */
1998 $wgUDPProfilerHost = '127.0.0.1';
1999 $wgUDPProfilerPort = '3811';
2001 /** Detects non-matching wfProfileIn/wfProfileOut calls */
2002 $wgDebugProfiling = false;
2003 /** Output debug message on every wfProfileIn/wfProfileOut */
2004 $wgDebugFunctionEntry = 0;
2007 * Destination for wfIncrStats() data...
2008 * 'cache' to go into the system cache, if enabled (memcached)
2009 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
2012 $wgStatsMethod = 'cache';
2014 /** Whereas to count the number of time an article is viewed.
2015 * Does not work if pages are cached (for example with squid).
2017 $wgDisableCounters = false;
2019 $wgDisableTextSearch = false;
2020 $wgDisableSearchContext = false;
2024 * Set to true to have nicer highligted text in search results,
2025 * by default off due to execution overhead
2027 $wgAdvancedSearchHighlighting = false;
2030 * Regexp to match word boundaries, defaults for non-CJK languages
2031 * should be empty for CJK since the words are not separate
2033 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
2034 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
2037 * Set to true to have the search engine count total
2038 * search matches to present in the Special:Search UI.
2039 * Not supported by every search engine shipped with MW.
2041 * This could however be slow on larger wikis, and is pretty flaky
2042 * with the current title vs content split. Recommend avoiding until
2043 * that's been worked out cleanly; but this may aid in testing the
2044 * search UI and API to confirm that the result count works.
2046 $wgCountTotalSearchHits = false;
2049 * Template for OpenSearch suggestions, defaults to API action=opensearch
2051 * Sites with heavy load would tipically have these point to a custom
2052 * PHP wrapper to avoid firing up mediawiki for every keystroke
2054 * Placeholders: {searchTerms}
2057 $wgOpenSearchTemplate = false;
2060 * Enable suggestions while typing in search boxes
2061 * (results are passed around in OpenSearch format)
2062 * Requires $wgEnableOpenSearchSuggest = true;
2064 $wgEnableMWSuggest = false;
2067 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
2068 * false if you've disabled MWSuggest or another suggestion script and
2069 * want reduce load caused by cached scripts pulling suggestions.
2071 $wgEnableOpenSearchSuggest = true;
2074 * Expiry time for search suggestion responses
2076 $wgSearchSuggestCacheExpiry = 1200;
2079 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
2081 * Placeholders: {searchTerms}, {namespaces}, {dbname}
2084 $wgMWSuggestTemplate = false;
2087 * If you've disabled search semi-permanently, this also disables updates to the
2088 * table. If you ever re-enable, be sure to rebuild the search table.
2090 $wgDisableSearchUpdate = false;
2091 /** Uploads have to be specially set up to be secure */
2092 $wgEnableUploads = false;
2094 * Show EXIF data, on by default if available.
2095 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
2097 * NOTE FOR WINDOWS USERS:
2098 * To enable EXIF functions, add the folloing lines to the
2099 * "Windows extensions" section of php.ini:
2101 * extension=extensions/php_mbstring.dll
2102 * extension=extensions/php_exif.dll
2104 $wgShowEXIF = function_exists( 'exif_read_data' );
2107 * Set to true to enable the upload _link_ while local uploads are disabled.
2108 * Assumes that the special page link will be bounced to another server where
2111 $wgRemoteUploads = false;
2114 * Disable links to talk pages of anonymous users (IPs) in listings on special
2115 * pages like page history, Special:Recentchanges, etc.
2117 $wgDisableAnonTalk = false;
2119 * Do DELETE/INSERT for link updates instead of incremental
2121 $wgUseDumbLinkUpdate = false;
2124 * Anti-lock flags - bitfield
2126 * Preload links during link update for save
2127 * ALF_PRELOAD_EXISTENCE
2128 * Preload cur_id during replaceLinkHolders
2130 * Don't use locking reads when updating the link table. This is
2131 * necessary for wikis with a high edit rate for performance
2132 * reasons, but may cause link table inconsistency
2134 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
2137 $wgAntiLockFlags = 0;
2140 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
2141 * fall back to the old behaviour (no merging).
2143 $wgDiff3 = '/usr/bin/diff3';
2146 * Path to the GNU diff utility.
2148 $wgDiff = '/usr/bin/diff';
2151 * We can also compress text stored in the 'text' table. If this is set on, new
2152 * revisions will be compressed on page save if zlib support is available. Any
2153 * compressed revisions will be decompressed on load regardless of this setting
2154 * *but will not be readable at all* if zlib support is not available.
2156 $wgCompressRevisions = false;
2159 * This is the list of preferred extensions for uploading files. Uploading files
2160 * with extensions not in this list will trigger a warning.
2162 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
2164 /** Files with these extensions will never be allowed as uploads. */
2165 $wgFileBlacklist = array(
2166 # HTML may contain cookie-stealing JavaScript and web bugs
2167 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
2168 # PHP scripts may execute arbitrary code on the server
2169 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
2170 # Other types that may be interpreted by some servers
2171 'shtml', 'jhtml', 'pl', 'py', 'cgi',
2172 # May contain harmful executables for Windows victims
2173 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
2175 /** Files with these mime types will never be allowed as uploads
2176 * if $wgVerifyMimeType is enabled.
2178 $wgMimeTypeBlacklist= array(
2179 # HTML may contain cookie-stealing JavaScript and web bugs
2180 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
2181 # PHP scripts may execute arbitrary code on the server
2182 'application/x-php', 'text/x-php',
2183 # Other types that may be interpreted by some servers
2184 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
2185 # Client-side hazards on Internet Explorer
2186 'text/scriptlet', 'application/x-msdownload',
2187 # Windows metafile, client-side vulnerability on some systems
2188 'application/x-msmetafile',
2189 # A ZIP file may be a valid Java archive containing an applet which exploits the
2190 # same-origin policy to steal cookies
2194 /** This is a flag to determine whether or not to check file extensions on upload. */
2195 $wgCheckFileExtensions = true;
2198 * If this is turned off, users may override the warning for files not covered
2199 * by $wgFileExtensions.
2201 $wgStrictFileExtensions = true;
2203 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
2204 $wgUploadSizeWarning = false;
2206 /** For compatibility with old installations set to false */
2207 $wgPasswordSalt = true;
2209 /** Which namespaces should support subpages?
2210 * See Language.php for a list of namespaces.
2212 $wgNamespacesWithSubpages = array(
2215 NS_USER_TALK
=> true,
2216 NS_PROJECT_TALK
=> true,
2217 NS_FILE_TALK
=> true,
2218 NS_MEDIAWIKI
=> true,
2219 NS_MEDIAWIKI_TALK
=> true,
2220 NS_TEMPLATE_TALK
=> true,
2221 NS_HELP_TALK
=> true,
2222 NS_CATEGORY_TALK
=> true
2226 * Which namespaces have special treatment where they should be preview-on-open
2227 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
2228 * can specify namespaces of pages they have special treatment for
2230 $wgPreviewOnOpenNamespaces = array(
2234 $wgNamespacesToBeSearchedDefault = array(
2239 * Namespaces to be searched when user clicks the "Help" tab
2242 * Same format as $wgNamespacesToBeSearchedDefault
2244 $wgNamespacesToBeSearchedHelp = array(
2250 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
2251 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
2254 $wgSearchEverythingOnlyLoggedIn = false;
2257 * Site notice shown at the top of each page
2259 * MediaWiki:Sitenotice page, which will override this. You can also
2260 * provide a separate message for logged-out users using the
2261 * MediaWiki:Anonnotice page.
2270 * Plugins for media file type handling.
2271 * Each entry in the array maps a MIME type to a class name
2273 $wgMediaHandlers = array(
2274 'image/jpeg' => 'BitmapHandler',
2275 'image/png' => 'BitmapHandler',
2276 'image/gif' => 'GIFHandler',
2277 'image/tiff' => 'TiffHandler',
2278 'image/x-ms-bmp' => 'BmpHandler',
2279 'image/x-bmp' => 'BmpHandler',
2280 'image/svg+xml' => 'SvgHandler', // official
2281 'image/svg' => 'SvgHandler', // compat
2282 'image/vnd.djvu' => 'DjVuHandler', // official
2283 'image/x.djvu' => 'DjVuHandler', // compat
2284 'image/x-djvu' => 'DjVuHandler', // compat
2289 * Resizing can be done using PHP's internal image libraries or using
2290 * ImageMagick or another third-party converter, e.g. GraphicMagick.
2291 * These support more file formats than PHP, which only supports PNG,
2292 * GIF, JPG, XBM and WBMP.
2294 * Use Image Magick instead of PHP builtin functions.
2296 $wgUseImageMagick = false;
2297 /** The convert command shipped with ImageMagick */
2298 $wgImageMagickConvertCommand = '/usr/bin/convert';
2300 /** Sharpening parameter to ImageMagick */
2301 $wgSharpenParameter = '0x0.4';
2303 /** Reduction in linear dimensions below which sharpening will be enabled */
2304 $wgSharpenReductionThreshold = 0.85;
2307 * Temporary directory used for ImageMagick. The directory must exist. Leave
2308 * this set to false to let ImageMagick decide for itself.
2310 $wgImageMagickTempDir = false;
2313 * Use another resizing converter, e.g. GraphicMagick
2314 * %s will be replaced with the source path, %d with the destination
2315 * %w and %h will be replaced with the width and height
2317 * An example is provided for GraphicMagick
2318 * Leave as false to skip this
2320 #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
2321 $wgCustomConvertCommand = false;
2323 # Scalable Vector Graphics (SVG) may be uploaded as images.
2324 # Since SVG support is not yet standard in browsers, it is
2325 # necessary to rasterize SVGs to PNG as a fallback format.
2327 # An external program is required to perform this conversion:
2328 $wgSVGConverters = array(
2329 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
2330 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
2331 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
2332 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
2333 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
2334 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
2336 /** Pick one of the above */
2337 $wgSVGConverter = 'ImageMagick';
2338 /** If not in the executable PATH, specify */
2339 $wgSVGConverterPath = '';
2340 /** Don't scale a SVG larger than this */
2341 $wgSVGMaxSize = 2048;
2343 * Don't thumbnail an image if it will use too much working memory
2344 * Default is 50 MB if decompressed to RGBA form, which corresponds to
2345 * 12.5 million pixels or 3500x3500
2347 $wgMaxImageArea = 1.25e7
;
2349 * Force thumbnailing of animated GIFs above this size to a single
2350 * frame instead of an animated thumbnail. As of MW 1.17 this limit
2351 * is checked against the total size of all frames in the animation.
2352 * It probably makes sense to keep this equal to $wgMaxImageArea.
2354 $wgMaxAnimatedGifArea = 1.25e7
;
2356 * Browsers don't support TIFF inline generally...
2357 * For inline display, we need to convert to PNG or JPEG.
2358 * Note scaling should work with ImageMagick, but may not with GD scaling.
2359 * // PNG is lossless, but inefficient for photos
2360 * $wgTiffThumbnailType = array( 'png', 'image/png' );
2361 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
2362 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
2364 $wgTiffThumbnailType = false;
2367 * If rendered thumbnail files are older than this timestamp, they
2368 * will be rerendered on demand as if the file didn't already exist.
2369 * Update if there is some need to force thumbs and SVG rasterizations
2370 * to rerender, such as fixes to rendering bugs.
2372 $wgThumbnailEpoch = '20030516000000';
2375 * If set, inline scaled images will still produce <img> tags ready for
2376 * output instead of showing an error message.
2378 * This may be useful if errors are transitory, especially if the site
2379 * is configured to automatically render thumbnails on request.
2381 * On the other hand, it may obscure error conditions from debugging.
2382 * Enable the debug log or the 'thumbnail' log group to make sure errors
2383 * are logged to a file for review.
2385 $wgIgnoreImageErrors = false;
2388 * Allow thumbnail rendering on page view. If this is false, a valid
2389 * thumbnail URL is still output, but no file will be created at
2390 * the target location. This may save some time if you have a
2391 * thumb.php or 404 handler set up which is faster than the regular
2394 $wgGenerateThumbnailOnParse = true;
2397 * Show thumbnails for old images on the image description page
2399 $wgShowArchiveThumbnails = true;
2401 /** Obsolete, always true, kept for compatibility with extensions */
2402 $wgUseImageResize = true;
2405 /** Set $wgCommandLineMode if it's not set already, to avoid notices */
2406 if( !isset( $wgCommandLineMode ) ) {
2407 $wgCommandLineMode = false;
2410 /** For colorized maintenance script output, is your terminal background dark ? */
2411 $wgCommandLineDarkBg = false;
2414 * Array for extensions to register their maintenance scripts with the
2415 * system. The key is the name of the class and the value is the full
2418 $wgMaintenanceScripts = array();
2421 # Recent changes settings
2424 /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
2425 $wgPutIPinRC = true;
2428 * Recentchanges items are periodically purged; entries older than this many
2430 * Default: 13 weeks = about three months
2432 $wgRCMaxAge = 13 * 7 * 24 * 3600;
2435 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
2436 * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
2437 * for some reason, and some users may use the high numbers to display that data which is still there.
2439 $wgRCFilterByAge = false;
2442 * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
2444 $wgRCLinkLimits = array( 50, 100, 250, 500 );
2445 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
2448 * Send recent changes updates via UDP. The updates will be formatted for IRC.
2449 * Set this to the IP address of the receiver.
2451 $wgRC2UDPAddress = false;
2454 * Port number for RC updates
2456 $wgRC2UDPPort = false;
2459 * Prefix to prepend to each UDP packet.
2460 * This can be used to identify the wiki. A script is available called
2461 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
2462 * tab to identify the IRC channel to send the log line to.
2464 $wgRC2UDPPrefix = '';
2467 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
2468 * IRC feed. If this is set to a string, that string will be used as the prefix.
2470 $wgRC2UDPInterwikiPrefix = false;
2473 * Set to true to omit "bot" edits (by users with the bot permission) from the
2476 $wgRC2UDPOmitBots = false;
2479 * Enable user search in Special:Newpages
2480 * This is really a temporary hack around an index install bug on some Wikipedias.
2481 * Kill it once fixed.
2483 $wgEnableNewpagesUserFilter = true;
2486 # Copyright and credits settings
2489 /** RDF metadata toggles */
2490 $wgEnableDublinCoreRdf = false;
2491 $wgEnableCreativeCommonsRdf = false;
2493 /** Override for copyright metadata.
2494 * TODO: these options need documentation
2496 $wgRightsPage = null;
2497 $wgRightsUrl = null;
2498 $wgRightsText = null;
2499 $wgRightsIcon = null;
2501 /** Set this to some HTML to override the rights icon with an arbitrary logo */
2502 $wgCopyrightIcon = null;
2504 /** Set this to true if you want detailed copyright information forms on Upload. */
2505 $wgUseCopyrightUpload = false;
2507 /** Set this to false if you want to disable checking that detailed copyright
2508 * information values are not empty. */
2509 $wgCheckCopyrightUpload = true;
2512 * Set this to the number of authors that you want to be credited below an
2513 * article text. Set it to zero to hide the attribution block, and a negative
2514 * number (like -1) to show all authors. Note that this will require 2-3 extra
2515 * database hits, which can have a not insignificant impact on performance for
2520 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
2521 * Otherwise, link to a separate credits page. */
2522 $wgShowCreditsIfMax = true;
2527 * Set this to false to avoid forcing the first letter of links to capitals.
2528 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2529 * appearing with a capital at the beginning of a sentence will *not* go to the
2530 * same place as links in the middle of a sentence using a lowercase initial.
2532 $wgCapitalLinks = true;
2535 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2536 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2537 * true by default (and setting them has no effect), due to various things that
2538 * require them to be so. Also, since Talk namespaces need to directly mirror their
2539 * associated content namespaces, the values for those are ignored in favor of the
2540 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2542 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2544 $wgCapitalLinkOverrides = array();
2547 * List of interwiki prefixes for wikis we'll accept as sources for
2548 * Special:Import (for sysops). Since complete page history can be imported,
2549 * these should be 'trusted'.
2551 * If a user has the 'import' permission but not the 'importupload' permission,
2552 * they will only be able to run imports through this transwiki interface.
2554 $wgImportSources = array();
2557 * Optional default target namespace for interwiki imports.
2558 * Can use this to create an incoming "transwiki"-style queue.
2559 * Set to numeric key, not the name.
2561 * Users may override this in the Special:Import dialog.
2563 $wgImportTargetNamespace = null;
2566 * If set to false, disables the full-history option on Special:Export.
2567 * This is currently poorly optimized for long edit histories, so is
2568 * disabled on Wikimedia's sites.
2570 $wgExportAllowHistory = true;
2573 * If set nonzero, Special:Export requests for history of pages with
2574 * more revisions than this will be rejected. On some big sites things
2575 * could get bogged down by very very long pages.
2577 $wgExportMaxHistory = 0;
2580 * Return distinct author list (when not returning full history)
2582 $wgExportAllowListContributors = false ;
2585 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
2586 * up to this specified level, which will cause it to include all
2587 * pages linked to from the pages you specify. Since this number
2588 * can become *insanely large* and could easily break your wiki,
2589 * it's disabled by default for now.
2591 * There's a HARD CODED limit of 5 levels of recursion to prevent a
2592 * crazy-big export from being done by someone setting the depth
2593 * number too high. In other words, last resort safety net.
2595 $wgExportMaxLinkDepth = 0;
2598 * Whether to allow the "export all pages in namespace" option
2600 $wgExportFromNamespaces = false;
2603 * Edits matching these regular expressions in body text
2604 * will be recognised as spam and rejected automatically.
2606 * There's no administrator override on-wiki, so be careful what you set. :)
2607 * May be an array of regexes or a single string for backwards compatibility.
2609 * See http://en.wikipedia.org/wiki/Regular_expression
2610 * Note that each regex needs a beginning/end delimiter, eg: # or /
2612 $wgSpamRegex = array();
2614 /** Same as the above except for edit summaries */
2615 $wgSummarySpamRegex = array();
2617 /** Similarly you can get a function to do the job. The function will be given
2618 * the following args:
2619 * - a Title object for the article the edit is made on
2620 * - the text submitted in the textarea (wpTextbox1)
2621 * - the section number.
2622 * The return should be boolean indicating whether the edit matched some evilness:
2624 * - false : let it through
2626 * For a complete example, have a look at the SpamBlacklist extension.
2628 $wgFilterCallback = false;
2630 /** Go button goes straight to the edit screen if the article doesn't exist. */
2631 $wgGoToEdit = false;
2633 /** Allow raw, unchecked HTML in <html>...</html> sections.
2634 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2635 * TO RESTRICT EDITING to only those that you trust
2640 * $wgUseTidy: use tidy to make sure HTML output is sane.
2641 * Tidy is a free tool that fixes broken HTML.
2642 * See http://www.w3.org/People/Raggett/tidy/
2643 * $wgTidyBin should be set to the path of the binary and
2644 * $wgTidyConf to the path of the configuration file.
2645 * $wgTidyOpts can include any number of parameters.
2647 * $wgTidyInternal controls the use of the PECL extension to use an in-
2648 * process tidy library instead of spawning a separate program.
2649 * Normally you shouldn't need to override the setting except for
2650 * debugging. To install, use 'pear install tidy' and add a line
2651 * 'extension=tidy.so' to php.ini.
2654 $wgAlwaysUseTidy = false;
2655 $wgTidyBin = 'tidy';
2656 $wgTidyConf = $IP.'/includes/tidy.conf';
2658 $wgTidyInternal = extension_loaded( 'tidy' );
2661 * Put tidy warnings in HTML comments
2662 * Only works for internal tidy.
2664 $wgDebugTidy = false;
2667 * Validate the overall output using tidy and refuse
2668 * to display the page if it's not valid.
2670 $wgValidateAllHtml = false;
2672 /** See list of skins and their symbolic names in languages/Language.php */
2673 $wgDefaultSkin = 'monobook';
2676 * Should we allow the user's to select their own skin that will override the default?
2677 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2679 $wgAllowUserSkin = true;
2682 * Optionally, we can specify a stylesheet to use for media="handheld".
2683 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2684 * If left empty, compliant handheld browsers won't pick up the skin
2685 * stylesheet, which is specified for 'screen' media.
2687 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2688 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2690 * Will also be switched in when 'handheld=yes' is added to the URL, like
2691 * the 'printable=yes' mode for print media.
2693 $wgHandheldStyle = false;
2696 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2697 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2698 * which doesn't recognize 'handheld' but does support media queries on its
2701 * Consider only using this if you have a *really good* handheld stylesheet,
2702 * as iPhone users won't have any way to disable it and use the "grown-up"
2705 $wgHandheldForIPhone = false;
2708 * Settings added to this array will override the default globals for the user
2709 * preferences used by anonymous visitors and newly created accounts.
2710 * For instance, to disable section editing links:
2711 * $wgDefaultUserOptions ['editsection'] = 0;
2714 $wgDefaultUserOptions = array(
2715 'ccmeonemails' => 0,
2717 'contextchars' => 50,
2718 'contextlines' => 5,
2719 'date' => 'default',
2722 'disablesuggest' => 0,
2723 'editfont' => 'default',
2724 'editondblclick' => 0,
2726 'editsectiononrightclick' => 0,
2728 'enotifminoredits' => 0,
2729 'enotifrevealaddr' => 0,
2730 'enotifusertalkpages' => 1,
2731 'enotifwatchlistpages' => 0,
2732 'extendwatchlist' => 0,
2733 'externaldiff' => 0,
2734 'externaleditor' => 0,
2736 'forceeditsummary' => 0,
2737 'gender' => 'unknown',
2739 'hidepatrolled' => 0,
2740 'highlightbroken' => 1,
2744 'minordefault' => 0,
2745 'newpageshidepatrolled' => 0,
2747 'noconvertlink' => 0,
2748 'norollbackdiff' => 0,
2749 'numberheadings' => 0,
2750 'previewonfirst' => 0,
2751 'previewontop' => 1,
2755 'rememberpassword' => 0,
2757 'searchlimit' => 20,
2758 'showhiddencats' => 0,
2759 'showjumplinks' => 1,
2760 'shownumberswatching' => 1,
2764 'stubthreshold' => 0,
2767 'uselivepreview' => 0,
2769 'watchcreations' => 0,
2770 'watchdefault' => 0,
2771 'watchdeletion' => 0,
2772 'watchlistdays' => 3.0,
2773 'watchlisthideanons' => 0,
2774 'watchlisthidebots' => 0,
2775 'watchlisthideliu' => 0,
2776 'watchlisthideminor' => 0,
2777 'watchlisthideown' => 0,
2778 'watchlisthidepatrolled' => 0,
2784 * Whether or not to allow and use real name fields.
2785 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2788 $wgAllowRealName = true;
2790 /** An array of preferences to not show for the user */
2791 $wgHiddenPrefs = array();
2793 /*****************************************************************************
2798 * A list of callback functions which are called once MediaWiki is fully initialised
2800 $wgExtensionFunctions = array();
2803 * Extension functions for initialisation of skins. This is called somewhat earlier
2804 * than $wgExtensionFunctions.
2806 $wgSkinExtensionFunctions = array();
2809 * Extension messages files.
2811 * Associative array mapping extension name to the filename where messages can be
2812 * found. The file should contain variable assignments. Any of the variables
2813 * present in languages/messages/MessagesEn.php may be defined, but $messages
2814 * is the most common.
2816 * Variables defined in extensions will override conflicting variables defined
2820 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
2823 $wgExtensionMessagesFiles = array();
2826 * Aliases for special pages provided by extensions.
2827 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
2829 $wgExtensionAliasesFiles = array();
2832 * Parser output hooks.
2833 * This is an associative array where the key is an extension-defined tag
2834 * (typically the extension name), and the value is a PHP callback.
2835 * These will be called as an OutputPageParserOutput hook, if the relevant
2836 * tag has been registered with the parser output object.
2838 * Registration is done with $pout->addOutputHook( $tag, $data ).
2840 * The callback has the form:
2841 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
2843 $wgParserOutputHooks = array();
2846 * List of valid skin names.
2847 * The key should be the name in all lower case, the value should be a display name.
2848 * The default skins will be added later, by Skin::getSkinNames(). Use
2849 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
2851 $wgValidSkinNames = array();
2854 * Special page list.
2855 * See the top of SpecialPage.php for documentation.
2857 $wgSpecialPages = array();
2860 * Array mapping class names to filenames, for autoloading.
2862 $wgAutoloadClasses = array();
2865 * An array of extension types and inside that their names, versions, authors,
2866 * urls, descriptions and pointers to localized description msgs. Note that
2867 * the version, url, description and descriptionmsg key can be omitted.
2870 * $wgExtensionCredits[$type][] = array(
2871 * 'name' => 'Example extension',
2873 * 'path' => __FILE__,
2874 * 'author' => 'Foo Barstein',
2875 * 'url' => 'http://wwww.example.com/Example%20Extension/',
2876 * 'description' => 'An example extension',
2877 * 'descriptionmsg' => 'exampleextension-desc',
2881 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
2882 * Where 'descriptionmsg' can be an array with message key and parameters:
2883 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
2885 $wgExtensionCredits = array();
2888 ******************************************************************************/
2891 * Allow user Javascript page?
2892 * This enables a lot of neat customizations, but may
2893 * increase security risk to users and server load.
2895 $wgAllowUserJs = false;
2898 * Allow user Cascading Style Sheets (CSS)?
2899 * This enables a lot of neat customizations, but may
2900 * increase security risk to users and server load.
2902 $wgAllowUserCss = false;
2905 * Allow user-preferences implemented in CSS?
2906 * This allows users to customise the site appearance to a greater
2907 * degree; disabling it will improve page load times.
2909 $wgAllowUserCssPrefs = true;
2911 /** Use the site's Javascript page? */
2912 $wgUseSiteJs = true;
2914 /** Use the site's Cascading Style Sheets (CSS)? */
2915 $wgUseSiteCss = true;
2918 * Filter for Special:Randompage. Part of a WHERE clause
2919 * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
2922 $wgExtraRandompageSQL = false;
2924 /** Allow the "info" action, very inefficient at the moment */
2925 $wgAllowPageInfo = false;
2927 /** Maximum indent level of toc. */
2928 $wgMaxTocLevel = 999;
2930 /** Name of the external diff engine to use */
2931 $wgExternalDiffEngine = false;
2933 /** Use RC Patrolling to check for vandalism */
2934 $wgUseRCPatrol = true;
2936 /** Use new page patrolling to check new pages on Special:Newpages */
2937 $wgUseNPPatrol = true;
2939 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
2942 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
2943 * eg Recentchanges, Newpages. */
2946 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
2947 * A cached version will continue to be served out even if changes
2948 * are made, until this many seconds runs out since the last render.
2950 * If set to 0, feed caching is disabled. Use this for debugging only;
2951 * feed generation can be pretty slow with diffs.
2953 $wgFeedCacheTimeout = 60;
2955 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
2956 * pages larger than this size. */
2957 $wgFeedDiffCutoff = 32768;
2959 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
2960 * every page. Some sites might have a different feed they'd like to promote
2961 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
2962 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
2963 * of either 'rss' or 'atom'.
2965 $wgOverrideSiteFeed = array();
2968 * Which feed types should we provide by default? This can include 'rss',
2969 * 'atom', neither, or both.
2971 $wgAdvertisedFeedTypes = array( 'atom' );
2974 * Additional namespaces. If the namespaces defined in Language.php and
2975 * Namespace.php are insufficient, you can create new ones here, for example,
2976 * to import Help files in other languages.
2977 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2978 * no longer be accessible. If you rename it, then you can access them through
2979 * the new namespace name.
2981 * Custom namespaces should start at 100 to avoid conflicting with standard
2982 * namespaces, and should always follow the even/odd main/talk pattern.
2984 #$wgExtraNamespaces =
2985 # array(100 => "Hilfe",
2986 # 101 => "Hilfe_Diskussion",
2988 # 103 => "Discussion_Aide"
2990 $wgExtraNamespaces = null;
2994 * These are alternate names for the primary localised namespace names, which
2995 * are defined by $wgExtraNamespaces and the language file. If a page is
2996 * requested with such a prefix, the request will be redirected to the primary
2999 * Set this to a map from namespace names to IDs.
3001 * $wgNamespaceAliases = array(
3002 * 'Wikipedian' => NS_USER,
3006 $wgNamespaceAliases = array();
3009 * Limit images on image description pages to a user-selectable limit. In order
3010 * to reduce disk usage, limits can only be selected from a list.
3011 * The user preference is saved as an array offset in the database, by default
3012 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
3013 * change it if you alter the array (see bug 8858).
3014 * This is the list of settings the user can choose from:
3016 $wgImageLimits = array (
3022 array(10000,10000) );
3025 * Adjust thumbnails on image pages according to a user setting. In order to
3026 * reduce disk usage, the values can only be selected from a list. This is the
3027 * list of settings the user can choose from:
3029 $wgThumbLimits = array(
3039 * Adjust width of upright images when parameter 'upright' is used
3040 * This allows a nicer look for upright images without the need to fix the width
3041 * by hardcoded px in wiki sourcecode.
3043 $wgThumbUpright = 0.75;
3046 * Default parameters for the <gallery> tag
3049 $wgGalleryOptions = array (
3050 'imagesPerRow' => 4, // Default number of images per-row in the gallery
3051 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
3052 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
3053 'captionLength' => 20, // Length of caption to truncate (in characters)
3054 'showBytes' => true, // Show the filesize in bytes in categories
3058 * On category pages, show thumbnail gallery for images belonging to that
3059 * category instead of listing them as articles.
3061 $wgCategoryMagicGallery = true;
3064 * Paging limit for categories
3066 $wgCategoryPagingLimit = 200;
3069 * Should the default category sortkey be the prefixed title?
3070 * Run maintenance/refreshLinks.php after changing this.
3072 $wgCategoryPrefixedDefaultSortkey = true;
3075 * Browser Blacklist for unicode non compliant browsers
3076 * Contains a list of regexps : "/regexp/" matching problematic browsers
3078 $wgBrowserBlackList = array(
3080 * Netscape 2-4 detection
3081 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
3082 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
3083 * with a negative assertion. The [UIN] identifier specifies the level of security
3084 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
3085 * The language string is unreliable, it is missing on NS4 Mac.
3087 * Reference: http://www.psychedelix.com/agents/index.shtml
3089 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3090 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3091 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
3094 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
3097 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
3098 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
3099 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
3102 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
3103 * @link http://en.wikipedia.org/wiki/Template%3AOS9
3105 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
3108 * Google wireless transcoder, seems to eat a lot of chars alive
3109 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
3111 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
3115 * Fake out the timezone that the server thinks it's in. This will be used for
3116 * date display and not for what's stored in the DB. Leave to null to retain
3117 * your server's OS-based timezone value.
3119 * This variable is currently used only for signature formatting and for local
3120 * time/date parser variables ({{LOCALTIME}} etc.)
3122 * Timezones can be translated by editing MediaWiki messages of type
3123 * timezone-nameinlowercase like timezone-utc.
3125 # $wgLocaltimezone = 'GMT';
3126 # $wgLocaltimezone = 'PST8PDT';
3127 # $wgLocaltimezone = 'Europe/Sweden';
3128 # $wgLocaltimezone = 'CET';
3129 $wgLocaltimezone = null;
3132 * Set an offset from UTC in minutes to use for the default timezone setting
3133 * for anonymous users and new user accounts.
3135 * This setting is used for most date/time displays in the software, and is
3136 * overrideable in user preferences. It is *not* used for signature timestamps.
3138 * You can set it to match the configured server timezone like this:
3139 * $wgLocalTZoffset = date("Z") / 60;
3141 * If your server is not configured for the timezone you want, you can set
3142 * this in conjunction with the signature timezone and override the PHP default
3144 * $wgLocaltimezone="Europe/Berlin";
3145 * date_default_timezone_set( $wgLocaltimezone );
3146 * $wgLocalTZoffset = date("Z") / 60;
3148 * Leave at NULL to show times in universal time (UTC/GMT).
3150 $wgLocalTZoffset = null;
3154 * When translating messages with wfMsg(), it is not always clear what should
3155 * be considered UI messages and what should be content messages.
3157 * For example, for the English Wikipedia, there should be only one 'mainpage',
3158 * so when getting the link for 'mainpage', we should treat it as site content
3159 * and call wfMsgForContent(), but for rendering the text of the link, we call
3160 * wfMsg(). The code behaves this way by default. However, sites like the
3161 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
3162 * different languages. This array provides a way to override the default
3163 * behavior. For example, to allow language-specific main page and community
3166 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
3168 $wgForceUIMsgAsContentMsg = array();
3172 * Authentication plugin.
3177 * Global list of hooks.
3178 * Add a hook by doing:
3179 * $wgHooks['event_name'][] = $function;
3181 * $wgHooks['event_name'][] = array($function, $data);
3183 * $wgHooks['event_name'][] = array($object, 'method');
3188 * The logging system has two levels: an event type, which describes the
3189 * general category and can be viewed as a named subset of all logs; and
3190 * an action, which is a specific kind of event that can exist in that
3193 $wgLogTypes = array( '',
3207 * This restricts log access to those who have a certain right
3208 * Users without this will not see it in the option menu and can not view it
3209 * Restricted logs are not added to recent changes
3210 * Logs should remain non-transcludable
3211 * Format: logtype => permissiontype
3213 $wgLogRestrictions = array(
3214 'suppress' => 'suppressionlog'
3218 * Show/hide links on Special:Log will be shown for these log types.
3220 * This is associative array of log type => boolean "hide by default"
3222 * See $wgLogTypes for a list of available log types.
3225 * $wgFilterLogTypes => array(
3227 * 'import' => false,
3230 * Will display show/hide links for the move and import logs. Move logs will be
3231 * hidden by default unless the link is clicked. Import logs will be shown by
3232 * default, and hidden when the link is clicked.
3234 * A message of the form log-show-hide-<type> should be added, and will be used
3235 * for the link text.
3237 $wgFilterLogTypes = array(
3242 * Lists the message key string for each log type. The localized messages
3243 * will be listed in the user interface.
3245 * Extensions with custom log types may add to this array.
3247 $wgLogNames = array(
3248 '' => 'all-logs-page',
3249 'block' => 'blocklogpage',
3250 'protect' => 'protectlogpage',
3251 'rights' => 'rightslog',
3252 'delete' => 'dellogpage',
3253 'upload' => 'uploadlogpage',
3254 'move' => 'movelogpage',
3255 'import' => 'importlogpage',
3256 'patrol' => 'patrol-log-page',
3257 'merge' => 'mergelog',
3258 'suppress' => 'suppressionlog',
3262 * Lists the message key string for descriptive text to be shown at the
3263 * top of each log type.
3265 * Extensions with custom log types may add to this array.
3267 $wgLogHeaders = array(
3268 '' => 'alllogstext',
3269 'block' => 'blocklogtext',
3270 'protect' => 'protectlogtext',
3271 'rights' => 'rightslogtext',
3272 'delete' => 'dellogpagetext',
3273 'upload' => 'uploadlogpagetext',
3274 'move' => 'movelogpagetext',
3275 'import' => 'importlogpagetext',
3276 'patrol' => 'patrol-log-header',
3277 'merge' => 'mergelogpagetext',
3278 'suppress' => 'suppressionlogtext',
3282 * Lists the message key string for formatting individual events of each
3283 * type and action when listed in the logs.
3285 * Extensions with custom log types may add to this array.
3287 $wgLogActions = array(
3288 'block/block' => 'blocklogentry',
3289 'block/unblock' => 'unblocklogentry',
3290 'block/reblock' => 'reblock-logentry',
3291 'protect/protect' => 'protectedarticle',
3292 'protect/modify' => 'modifiedarticleprotection',
3293 'protect/unprotect' => 'unprotectedarticle',
3294 'protect/move_prot' => 'movedarticleprotection',
3295 'rights/rights' => 'rightslogentry',
3296 'delete/delete' => 'deletedarticle',
3297 'delete/restore' => 'undeletedarticle',
3298 'delete/revision' => 'revdelete-logentry',
3299 'delete/event' => 'logdelete-logentry',
3300 'upload/upload' => 'uploadedimage',
3301 'upload/overwrite' => 'overwroteimage',
3302 'upload/revert' => 'uploadedimage',
3303 'move/move' => '1movedto2',
3304 'move/move_redir' => '1movedto2_redir',
3305 'import/upload' => 'import-logentry-upload',
3306 'import/interwiki' => 'import-logentry-interwiki',
3307 'merge/merge' => 'pagemerge-logentry',
3308 'suppress/revision' => 'revdelete-logentry',
3309 'suppress/file' => 'revdelete-logentry',
3310 'suppress/event' => 'logdelete-logentry',
3311 'suppress/delete' => 'suppressedarticle',
3312 'suppress/block' => 'blocklogentry',
3313 'suppress/reblock' => 'reblock-logentry',
3314 'patrol/patrol' => 'patrol-log-line',
3318 * The same as above, but here values are names of functions,
3321 $wgLogActionsHandlers = array();
3324 * Maintain a log of newusers at Log/newusers?
3326 $wgNewUserLog = true;
3329 * Log the automatic creations of new users accounts?
3331 $wgLogAutocreatedAccounts = false;
3334 * List of special pages, followed by what subtitle they should go under
3335 * at Special:SpecialPages
3337 $wgSpecialPageGroups = array(
3338 'DoubleRedirects' => 'maintenance',
3339 'BrokenRedirects' => 'maintenance',
3340 'Lonelypages' => 'maintenance',
3341 'Uncategorizedpages' => 'maintenance',
3342 'Uncategorizedcategories' => 'maintenance',
3343 'Uncategorizedimages' => 'maintenance',
3344 'Uncategorizedtemplates' => 'maintenance',
3345 'Unusedcategories' => 'maintenance',
3346 'Unusedimages' => 'maintenance',
3347 'Protectedpages' => 'maintenance',
3348 'Protectedtitles' => 'maintenance',
3349 'Unusedtemplates' => 'maintenance',
3350 'Withoutinterwiki' => 'maintenance',
3351 'Longpages' => 'maintenance',
3352 'Shortpages' => 'maintenance',
3353 'Ancientpages' => 'maintenance',
3354 'Deadendpages' => 'maintenance',
3355 'Wantedpages' => 'maintenance',
3356 'Wantedcategories' => 'maintenance',
3357 'Wantedfiles' => 'maintenance',
3358 'Wantedtemplates' => 'maintenance',
3359 'Unwatchedpages' => 'maintenance',
3360 'Fewestrevisions' => 'maintenance',
3362 'Userlogin' => 'login',
3363 'Userlogout' => 'login',
3364 'CreateAccount' => 'login',
3366 'Recentchanges' => 'changes',
3367 'Recentchangeslinked' => 'changes',
3368 'Watchlist' => 'changes',
3369 'Newimages' => 'changes',
3370 'Newpages' => 'changes',
3372 'Tags' => 'changes',
3374 'Upload' => 'media',
3375 'Listfiles' => 'media',
3376 'MIMEsearch' => 'media',
3377 'FileDuplicateSearch' => 'media',
3378 'Filepath' => 'media',
3380 'Listusers' => 'users',
3381 'Activeusers' => 'users',
3382 'Listgrouprights' => 'users',
3383 'Ipblocklist' => 'users',
3384 'Contributions' => 'users',
3385 'Emailuser' => 'users',
3386 'Listadmins' => 'users',
3387 'Listbots' => 'users',
3388 'Userrights' => 'users',
3389 'Blockip' => 'users',
3390 'Preferences' => 'users',
3391 'Resetpass' => 'users',
3392 'DeletedContributions' => 'users',
3394 'Mostlinked' => 'highuse',
3395 'Mostlinkedcategories' => 'highuse',
3396 'Mostlinkedtemplates' => 'highuse',
3397 'Mostcategories' => 'highuse',
3398 'Mostimages' => 'highuse',
3399 'Mostrevisions' => 'highuse',
3401 'Allpages' => 'pages',
3402 'Prefixindex' => 'pages',
3403 'Listredirects' => 'pages',
3404 'Categories' => 'pages',
3405 'Disambiguations' => 'pages',
3407 'Randompage' => 'redirects',
3408 'Randomredirect' => 'redirects',
3409 'Mypage' => 'redirects',
3410 'Mytalk' => 'redirects',
3411 'Mycontributions' => 'redirects',
3412 'Search' => 'redirects',
3413 'LinkSearch' => 'redirects',
3415 'Movepage' => 'pagetools',
3416 'MergeHistory' => 'pagetools',
3417 'Revisiondelete' => 'pagetools',
3418 'Undelete' => 'pagetools',
3419 'Export' => 'pagetools',
3420 'Import' => 'pagetools',
3421 'Whatlinkshere' => 'pagetools',
3423 'Statistics' => 'wiki',
3424 'Version' => 'wiki',
3426 'Unlockdb' => 'wiki',
3427 'Allmessages' => 'wiki',
3428 'Popularpages' => 'wiki',
3430 'Specialpages' => 'other',
3431 'Blockme' => 'other',
3432 'Booksources' => 'other',
3436 * Disable the internal MySQL-based search, to allow it to be
3437 * implemented by an extension instead.
3439 $wgDisableInternalSearch = false;
3442 * Set this to a URL to forward search requests to some external location.
3443 * If the URL includes '$1', this will be replaced with the URL-encoded
3446 * For example, to forward to Google you'd have something like:
3447 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3448 * '&domains=http://example.com' .
3449 * '&sitesearch=http://example.com' .
3450 * '&ie=utf-8&oe=utf-8';
3452 $wgSearchForwardUrl = null;
3455 * Set a default target for external links, e.g. _blank to pop up a new window
3457 $wgExternalLinkTarget = false;
3460 * If true, external URL links in wiki text will be given the
3461 * rel="nofollow" attribute as a hint to search engines that
3462 * they should not be followed for ranking purposes as they
3463 * are user-supplied and thus subject to spamming.
3465 $wgNoFollowLinks = true;
3468 * Namespaces in which $wgNoFollowLinks doesn't apply.
3469 * See Language.php for a list of namespaces.
3471 $wgNoFollowNsExceptions = array();
3474 * If this is set to an array of domains, external links to these domain names
3475 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3476 * value of $wgNoFollowLinks. For instance:
3478 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3480 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3481 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3484 $wgNoFollowDomainExceptions = array();
3487 * Default robot policy. The default policy is to encourage indexing and fol-
3488 * lowing of links. It may be overridden on a per-namespace and/or per-page
3491 $wgDefaultRobotPolicy = 'index,follow';
3494 * Robot policies per namespaces. The default policy is given above, the array
3495 * is made of namespace constants as defined in includes/Defines.php. You can-
3496 * not specify a different default policy for NS_SPECIAL: it is always noindex,
3497 * nofollow. This is because a number of special pages (e.g., ListPages) have
3498 * many permutations of options that display the same data under redundant
3499 * URLs, so search engine spiders risk getting lost in a maze of twisty special
3500 * pages, all alike, and never reaching your actual content.
3503 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
3505 $wgNamespaceRobotPolicies = array();
3508 * Robot policies per article. These override the per-namespace robot policies.
3509 * Must be in the form of an array where the key part is a properly canonical-
3510 * ised text form title and the value is a robot policy.
3512 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
3513 * 'User:Bob' => 'index,follow' );
3514 * Example that DOES NOT WORK because the names are not canonical text forms:
3515 * $wgArticleRobotPolicies = array(
3516 * # Underscore, not space!
3517 * 'Main_Page' => 'noindex,follow',
3518 * # "Project", not the actual project name!
3519 * 'Project:X' => 'index,follow',
3520 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
3521 * 'abc' => 'noindex,nofollow'
3524 $wgArticleRobotPolicies = array();
3527 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
3528 * will not function, so users can't decide whether pages in that namespace are
3529 * indexed by search engines. If set to null, default to $wgContentNamespaces.
3531 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
3533 $wgExemptFromUserRobotsControl = null;
3536 * Specifies the minimal length of a user password. If set to 0, empty pass-
3537 * words are allowed.
3539 $wgMinimalPasswordLength = 1;
3542 * Activate external editor interface for files and pages
3543 * See http://www.mediawiki.org/wiki/Manual:External_editors
3545 $wgUseExternalEditor = true;
3547 /** Whether or not to sort special pages in Special:Specialpages */
3549 $wgSortSpecialPages = true;
3552 * Specify the name of a skin that should not be presented in the list of a-
3553 * vailable skins. Use for blacklisting a skin which you do not want to remove
3554 * from the .../skins/ directory
3557 $wgSkipSkins = array(); # More of the same
3560 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
3562 $wgDisabledActions = array();
3565 * Disable redirects to special pages and interwiki redirects, which use a 302
3566 * and have no "redirected from" link.
3568 $wgDisableHardRedirects = false;
3571 * Set to false to disable application of access keys and tooltips,
3572 * eg to avoid keyboard conflicts with system keys or as a low-level
3575 $wgEnableTooltipsAndAccesskeys = true;
3578 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3581 $wgEnableDnsBlacklist = false;
3584 * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
3587 $wgEnableSorbs = false;
3590 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
3593 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3596 * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
3599 $wgSorbsUrl = array();
3602 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3603 * what the other methods might say.
3605 $wgProxyWhitelist = array();
3608 * Simple rate limiter options to brake edit floods. Maximum number actions
3609 * allowed in the given number of seconds; after that the violating client re-
3610 * ceives HTTP 500 error pages until the period elapses.
3612 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3614 * This option set is experimental and likely to change. Requires memcached.
3616 $wgRateLimits = array(
3618 'anon' => null, // for any and all anonymous edits (aggregate)
3619 'user' => null, // for each logged-in user
3620 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3621 'ip' => null, // for each anon and recent account
3622 'subnet' => null, // ... with final octet removed
3630 'mailpassword' => array(
3633 'emailuser' => array(
3639 * Set to a filename to log rate limiter hits.
3641 $wgRateLimitLog = null;
3644 * Array of groups which should never trigger the rate limiter
3646 * @deprecated as of 1.13.0, the preferred method is using
3647 * $wgGroupPermissions[]['noratelimit']. However, this will still
3650 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3652 $wgRateLimitsExcludedGroups = array();
3655 * Array of IPs which should be excluded from rate limits.
3656 * This may be useful for whitelisting NAT gateways for conferences, etc.
3658 $wgRateLimitsExcludedIPs = array();
3661 * On Special:Unusedimages, consider images "used", if they are put
3662 * into a category. Default (false) is not to count those as used.
3664 $wgCountCategorizedImagesAsUsed = false;
3667 * External stores allow including content
3668 * from non database sources following URL links
3670 * Short names of ExternalStore classes may be specified in an array here:
3671 * $wgExternalStores = array("http","file","custom")...
3673 * CAUTION: Access to database might lead to code execution
3675 $wgExternalStores = false;
3678 * An array of external mysql servers, e.g.
3679 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
3680 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
3682 $wgExternalServers = array();
3685 * The place to put new revisions, false to put them in the local text table.
3686 * Part of a URL, e.g. DB://cluster1
3688 * Can be an array instead of a single string, to enable data distribution. Keys
3689 * must be consecutive integers, starting at zero. Example:
3691 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
3694 $wgDefaultExternalStore = false;
3697 * Revision text may be cached in $wgMemc to reduce load on external storage
3698 * servers and object extraction overhead for frequently-loaded revisions.
3700 * Set to 0 to disable, or number of seconds before cache expiry.
3702 $wgRevisionCacheExpiry = 0;
3705 * list of trusted media-types and mime types.
3706 * Use the MEDIATYPE_xxx constants to represent media types.
3707 * This list is used by Image::isSafeFile
3709 * Types not listed here will have a warning about unsafe content
3710 * displayed on the images description page. It would also be possible
3711 * to use this for further restrictions, like disabling direct
3712 * [[media:...]] links for non-trusted formats.
3714 $wgTrustedMediaFormats= array(
3715 MEDIATYPE_BITMAP
, //all bitmap formats
3716 MEDIATYPE_AUDIO
, //all audio formats
3717 MEDIATYPE_VIDEO
, //all plain video formats
3718 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
3719 "application/pdf", //PDF files
3720 #"application/x-shockwave-flash", //flash/shockwave movie
3724 * Allow special page inclusions such as {{Special:Allpages}}
3726 $wgAllowSpecialInclusion = true;
3729 * Timeout for HTTP requests done internally
3731 $wgHTTPTimeout = 25;
3734 * Timeout for Asynchronous (background) HTTP requests
3736 $wgAsyncHTTPTimeout = 25;
3739 * Proxy to use for CURL requests.
3741 $wgHTTPProxy = false;
3744 * Enable interwiki transcluding. Only when iw_trans=1.
3746 $wgEnableScaryTranscluding = false;
3748 * Expiry time for interwiki transclusion
3750 $wgTranscludeCacheExpiry = 3600;
3753 * Support blog-style "trackbacks" for articles. See
3754 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3756 $wgUseTrackbacks = false;
3759 * Enable filtering of categories in Recentchanges
3761 $wgAllowCategorizedRecentChanges = false ;
3764 * Number of jobs to perform per request. May be less than one in which case
3765 * jobs are performed probabalistically. If this is zero, jobs will not be done
3766 * during ordinary apache requests. In this case, maintenance/runJobs.php should
3767 * be run periodically.
3772 * Number of rows to update per job
3774 $wgUpdateRowsPerJob = 500;
3777 * Number of rows to update per query
3779 $wgUpdateRowsPerQuery = 100;
3782 * Enable AJAX framework
3787 * List of Ajax-callable functions.
3788 * Extensions acting as Ajax callbacks must register here
3790 $wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
3793 * Enable watching/unwatching pages using AJAX.
3794 * Requires $wgUseAjax to be true too.
3795 * Causes wfAjaxWatch to be added to $wgAjaxExportList
3797 $wgAjaxWatch = true;
3800 * Enable AJAX check for file overwrite, pre-upload
3802 $wgAjaxUploadDestCheck = true;
3805 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
3807 $wgAjaxLicensePreview = true;
3810 * Allow DISPLAYTITLE to change title display
3812 $wgAllowDisplayTitle = true;
3815 * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
3817 $wgRestrictDisplayTitle = true;
3820 * Array of usernames which may not be registered or logged in from
3821 * Maintenance scripts can still use these
3823 $wgReservedUsernames = array(
3824 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3825 'Conversion script', // Used for the old Wikipedia software upgrade
3826 'Maintenance script', // Maintenance scripts which perform editing, image import script
3827 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3828 'msg:double-redirect-fixer', // Automatic double redirect fix
3832 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
3833 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
3834 * crap files as images. When this directive is on, <title> will be allowed in files with
3835 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
3836 * and doesn't send appropriate MIME types for SVG images.
3838 $wgAllowTitlesInSVG = false;
3841 * Array of namespaces which can be deemed to contain valid "content", as far
3842 * as the site statistics are concerned. Useful if additional namespaces also
3843 * contain "content" which should be considered when generating a count of the
3844 * number of articles in the wiki.
3846 $wgContentNamespaces = array( NS_MAIN
);
3849 * Maximum amount of virtual memory available to shell processes under linux, in KB.
3851 $wgMaxShellMemory = 102400;
3854 * Maximum file size created by shell processes under linux, in KB
3855 * ImageMagick convert for example can be fairly hungry for scratch space
3857 $wgMaxShellFileSize = 102400;
3860 * Maximum CPU time in seconds for shell processes under linux
3862 $wgMaxShellTime = 180;
3865 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
3867 $wgPhpCli = '/usr/bin/php';
3871 * Path of the djvudump executable
3872 * Enable this and $wgDjvuRenderer to enable djvu rendering
3874 # $wgDjvuDump = 'djvudump';
3878 * Path of the ddjvu DJVU renderer
3879 * Enable this and $wgDjvuDump to enable djvu rendering
3881 # $wgDjvuRenderer = 'ddjvu';
3882 $wgDjvuRenderer = null;
3885 * Path of the djvutxt DJVU text extraction utility
3886 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
3888 # $wgDjvuTxt = 'djvutxt';
3892 * Path of the djvutoxml executable
3893 * This works like djvudump except much, much slower as of version 3.5.
3895 * For now I recommend you use djvudump instead. The djvuxml output is
3896 * probably more stable, so we'll switch back to it as soon as they fix
3897 * the efficiency problem.
3898 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
3900 # $wgDjvuToXML = 'djvutoxml';
3901 $wgDjvuToXML = null;
3905 * Shell command for the DJVU post processor
3906 * Default: pnmtopng, since ddjvu generates ppm output
3907 * Set this to false to output the ppm file directly.
3909 $wgDjvuPostProcessor = 'pnmtojpeg';
3911 * File extension for the DJVU post processor output
3913 $wgDjvuOutputExtension = 'jpg';
3916 * Enable the MediaWiki API for convenient access to
3917 * machine-readable data via api.php
3919 * See http://www.mediawiki.org/wiki/API
3921 $wgEnableAPI = true;
3924 * Allow the API to be used to perform write operations
3925 * (page edits, rollback, etc.) when an authorised user
3928 $wgEnableWriteAPI = true;
3931 * API module extensions
3932 * Associative array mapping module name to class name.
3933 * Extension modules may override the core modules.
3935 $wgAPIModules = array();
3936 $wgAPIMetaModules = array();
3937 $wgAPIPropModules = array();
3938 $wgAPIListModules = array();
3941 * Maximum amount of rows to scan in a DB query in the API
3942 * The default value is generally fine
3944 $wgAPIMaxDBRows = 5000;
3947 * The maximum size (in bytes) of an API result.
3948 * Don't set this lower than $wgMaxArticleSize*1024
3950 $wgAPIMaxResultSize = 8388608;
3953 * The maximum number of uncached diffs that can be retrieved in one API
3954 * request. Set this to 0 to disable API diffs altogether
3956 $wgAPIMaxUncachedDiffs = 1;
3959 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
3960 * API request logging
3962 $wgAPIRequestLog = false;
3965 * Cache the API help text for up to an hour. Disable this during API
3966 * debugging and development
3968 $wgAPICacheHelp = true;
3971 * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
3974 $wgAPICacheHelpTimeout = 60*60;
3977 * Parser test suite files to be run by parserTests.php when no specific
3978 * filename is passed to it.
3980 * Extensions may add their own tests to this array, or site-local tests
3981 * may be added via LocalSettings.php
3985 $wgParserTestFiles = array(
3986 "$IP/maintenance/parserTests.txt",
3990 * If configured, specifies target CodeReview installation to send test
3991 * result data from 'parserTests.php --upload'
3993 * Something like this:
3994 * $wgParserTestRemote = array(
3995 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
3996 * 'repo' => 'MediaWiki',
3997 * 'suite' => 'ParserTests',
3998 * 'path' => '/trunk/phase3', // not used client-side; for reference
3999 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
4002 $wgParserTestRemote = false;
4005 * Break out of framesets. This can be used to prevent external sites from
4006 * framing your site with ads.
4008 $wgBreakFrames = false;
4011 * Set this to an array of special page names to prevent
4012 * maintenance/updateSpecialPages.php from updating those pages.
4014 $wgDisableQueryPageUpdate = false;
4017 * Disable output compression (enabled by default if zlib is available)
4019 $wgDisableOutputCompression = false;
4022 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
4023 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
4024 * show a more obvious warning.
4026 $wgSlaveLagWarning = 10;
4027 $wgSlaveLagCritical = 30;
4030 * Parser configuration. Associative array with the following members:
4032 * class The class name
4034 * preprocessorClass The preprocessor class. Two classes are currently available:
4035 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
4036 * storage, and Preprocessor_DOM, which uses the DOM module for
4037 * temporary storage. Preprocessor_DOM generally uses less memory;
4038 * the speed of the two is roughly the same.
4040 * If this parameter is not given, it uses Preprocessor_DOM if the
4041 * DOM module is available, otherwise it uses Preprocessor_Hash.
4043 * The entire associative array will be passed through to the constructor as
4044 * the first parameter. Note that only Setup.php can use this variable --
4045 * the configuration will change at runtime via $wgParser member functions, so
4046 * the contents of this variable will be out-of-date. The variable can only be
4047 * changed during LocalSettings.php, in particular, it can't be changed during
4048 * an extension setup function.
4050 $wgParserConf = array(
4051 'class' => 'Parser',
4052 #'preprocessorClass' => 'Preprocessor_Hash',
4056 * LinkHolderArray batch size
4059 $wgLinkHolderBatchSize = 1000;
4062 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
4063 * use this value to override:
4065 $wgRegisterInternalExternals = false;
4068 * Hooks that are used for outputting exceptions. Format is:
4069 * $wgExceptionHooks[] = $funcname
4071 * $wgExceptionHooks[] = array( $class, $funcname )
4072 * Hooks should return strings or false
4074 $wgExceptionHooks = array();
4077 * Page property link table invalidation lists. When a page property
4078 * changes, this may require other link tables to be updated (eg
4079 * adding __HIDDENCAT__ means the hiddencat tracking category will
4080 * have been added, so the categorylinks table needs to be rebuilt).
4081 * This array can be added to by extensions.
4083 $wgPagePropLinkInvalidations = array(
4084 'hiddencat' => 'categorylinks',
4088 * Maximum number of links to a redirect page listed on
4089 * Special:Whatlinkshere/RedirectDestination
4091 $wgMaxRedirectLinksRetrieved = 500;
4094 * Maximum number of calls per parse to expensive parser functions such as
4097 $wgExpensiveParserFunctionLimit = 100;
4100 * Maximum number of pages to move at once when moving subpages with a page.
4102 $wgMaximumMovedPages = 100;
4105 * Fix double redirects after a page move.
4106 * Tends to conflict with page move vandalism, use only on a private wiki.
4108 $wgFixDoubleRedirects = false;
4111 * Max number of redirects to follow when resolving redirects.
4112 * 1 means only the first redirect is followed (default behavior).
4113 * 0 or less means no redirects are followed.
4115 $wgMaxRedirects = 1;
4118 * Array of invalid page redirect targets.
4119 * Attempting to create a redirect to any of the pages in this array
4120 * will make the redirect fail.
4121 * Userlogout is hard-coded, so it does not need to be listed here.
4122 * (bug 10569) Disallow Mypage and Mytalk as well.
4124 * As of now, this only checks special pages. Redirects to pages in
4125 * other namespaces cannot be invalidated by this variable.
4127 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
4130 * Array of namespaces to generate a sitemap for when the
4131 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4132 * nerated for all namespaces.
4134 $wgSitemapNamespaces = false;
4138 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4139 * will try to automatically create one. This feature can be disabled by set-
4140 * ting this variable false.
4142 $wgUseAutomaticEditSummaries = true;
4145 * Limit password attempts to X attempts per Y seconds per IP per account.
4146 * Requires memcached.
4148 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
4151 * Display user edit counts in various prominent places.
4153 $wgEdititis = false;
4156 * Enable the UniversalEditButton for browsers that support it
4157 * (currently only Firefox with an extension)
4158 * See http://universaleditbutton.org for more background information
4160 $wgUniversalEditButton = true;
4163 * Should we allow a broader set of characters in id attributes, per HTML5? If
4164 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
4165 * functionality is ready, it will be on by default with no option.
4167 * Currently this appears to work fine in Chrome 4 and 5, Firefox 3.5 and 3.6, IE6
4168 * and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
4169 * to work as anchors. So not quite ready for general use yet.
4171 $wgExperimentalHtmlIds = false;
4174 * Search form behavior
4175 * true = use Go & Search buttons
4176 * false = use Go button & Advanced search link
4178 $wgUseTwoButtonsSearchForm = true;
4181 * Search form behavior for Vector skin only
4182 * true = use an icon search button
4183 * false = use Go & Search buttons
4185 $wgVectorUseSimpleSearch = false;
4188 * Watch and unwatch as an icon rather than a link for Vector skin only
4189 * true = use an icon watch/unwatch button
4190 * false = use watch/unwatch text link
4192 $wgVectorUseIconWatch = false;
4195 * Add extra stylesheets for Vector - This is only being used so that we can play around with different options while
4196 * keeping our CSS code in the SVN and not having to change the main Vector styles. This will probably go away later on.
4197 * null = add no extra styles
4198 * array = list of style paths relative to skins/vector/
4200 $wgVectorExtraStyles = null;
4203 * Preprocessor caching threshold
4205 $wgPreprocessorCacheThreshold = 1000;
4208 * Allow filtering by change tag in recentchanges, history, etc
4209 * Has no effect if no tags are defined in valid_tag.
4211 $wgUseTagFilter = true;
4214 * Allow redirection to another page when a user logs in.
4215 * To enable, set to a string like 'Main Page'
4217 $wgRedirectOnLogin = null;
4220 * Characters to prevent during new account creations.
4221 * This is used in a regular expression character class during
4222 * registration (regex metacharacters like / are escaped).
4224 $wgInvalidUsernameCharacters = '@';
4227 * Character used as a delimiter when testing for interwiki userrights
4228 * (In Special:UserRights, it is possible to modify users on different
4229 * databases if the delimiter is used, e.g. Someuser@enwiki).
4231 * It is recommended that you have this delimiter in
4232 * $wgInvalidUsernameCharacters above, or you will not be able to
4233 * modify the user rights of those users via Special:UserRights
4235 $wgUserrightsInterwikiDelimiter = '@';
4238 * Configuration for processing pool control, for use in high-traffic wikis.
4239 * An implementation is provided in the PoolCounter extension.
4241 * This configuration array maps pool types to an associative array. The only
4242 * defined key in the associative array is "class", which gives the class name.
4243 * The remaining elements are passed through to the class as constructor
4244 * parameters. Example:
4246 * $wgPoolCounterConf = array( 'Article::view' => array(
4247 * 'class' => 'PoolCounter_Client',
4248 * ... any extension-specific options...
4251 $wgPoolCounterConf = null;
4254 * Use some particular type of external authentication. The specific
4255 * authentication module you use will normally require some extra settings to
4258 * null indicates no external authentication is to be used. Otherwise,
4259 * $wgExternalAuthType must be the name of a non-abstract class that extends
4262 * Core authentication modules can be found in includes/extauth/.
4264 $wgExternalAuthType = null;
4267 * Configuration for the external authentication. This may include arbitrary
4268 * keys that depend on the authentication mechanism. For instance,
4269 * authentication against another web app might require that the database login
4270 * info be provided. Check the file where your auth mechanism is defined for
4271 * info on what to put here.
4273 $wgExternalAuthConfig = array();
4276 * When should we automatically create local accounts when external accounts
4277 * already exist, if using ExternalAuth? Can have three values: 'never',
4278 * 'login', 'view'. 'view' requires the external database to support cookies,
4279 * and implies 'login'.
4281 * TODO: Implement 'view' (currently behaves like 'login').
4283 $wgAutocreatePolicy = 'login';
4286 * Policies for how each preference is allowed to be changed, in the presence
4287 * of external authentication. The keys are preference keys, e.g., 'password'
4288 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
4291 * - local: Allow changes to this pref through the wiki interface but only
4292 * apply them locally (default).
4293 * - semiglobal: Allow changes through the wiki interface and try to apply them
4294 * to the foreign database, but continue on anyway if that fails.
4295 * - global: Allow changes through the wiki interface, but only let them go
4296 * through if they successfully update the foreign database.
4297 * - message: Allow no local changes for linked accounts; replace the change
4298 * form with a message provided by the auth plugin, telling the user how to
4299 * change the setting externally (maybe providing a link, etc.). If the auth
4300 * plugin provides no message for this preference, hide it entirely.
4302 * Accounts that are not linked to an external account are never affected by
4303 * this setting. You may want to look at $wgHiddenPrefs instead.
4304 * $wgHiddenPrefs supersedes this option.
4306 * TODO: Implement message, global.
4308 $wgAllowPrefChange = array();
4312 * Settings for incoming cross-site AJAX requests:
4313 * Newer browsers support cross-site AJAX when the target resource allows requests
4314 * from the origin domain by the Access-Control-Allow-Origin header.
4315 * This is currently only used by the API (requests to api.php)
4316 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
4318 * '*' matches any number of characters
4319 * '?' matches any 1 character
4322 $wgCrossSiteAJAXdomains = array(
4323 'www.mediawiki.org',
4330 $wgCrossSiteAJAXdomains = array();
4333 * Domains that should not be allowed to make AJAX requests,
4334 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
4335 * Uses the same syntax as $wgCrossSiteAJAXdomains
4338 $wgCrossSiteAJAXdomainExceptions = array();
4341 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to raise PHP's memory limit if it's below this amount.
4343 $wgMemoryLimit = "50M";
4346 * To disable file delete/restore temporarily
4348 $wgUploadMaintenance = false;
4351 * Use old names for change_tags indices.
4353 $wgOldChangeTagsIndex = false;