<?php
/**
 * DO NOT EDIT THIS FILE!
 *
 * To customize your installation, edit "LocalSettings.php".
 *
 * Note that since all these string interpolations are expanded
 * before LocalSettings is included, if you localize something
 * like $wgScriptPath, you must also localize everything that
 * depends on it.
 *
 * @package MediaWiki
 */

# This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
if( defined( 'MEDIAWIKI' ) ) {

/** MediaWiki version number */
$wgVersion			= '1.5pre-alpha';

/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename         = 'MediaWiki';

/** Will be same as you set @see $wgSitename */
$wgMetaNamespace    = FALSE;

/** URL of the serve. It will be automaticly build including https mode */
$wgServer = '';

if( isset( $_SERVER['SERVER_NAME'] ) ) {
	$wgServerName = $_SERVER['SERVER_NAME'];
} elseif( isset( $_SERVER['HOSTNAME'] ) ) {
	$wgServerName = $_SERVER['HOSTNAME'];
} else {
	# FIXME: Fall back on... something else?
	$wgServerName = 'localhost';
}

# check if server use https:
$wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';

$wgServer = $wgProto.'://' . $wgServerName;
if( isset( $_SERVER['SERVER_PORT'] ) && $_SERVER['SERVER_PORT'] != 80 ) {
	$wgServer .= ":" . $_SERVER['SERVER_PORT'];
}
unset($wgProto);


/**
 * The path we should point to.
 * It might be a virtual path in case with use apache mod_rewrite for example
 */
$wgScriptPath	    = '/wiki';

/**
 * Whether to support URLs like index.php/Page_title
 * @global bool $wgUsePathInfo
 */
$wgUsePathInfo		= ( strpos( php_sapi_name(), 'cgi' ) === false );


/**#@+
 * Script users will request to get articles
 * ATTN: Old installations used wiki.phtml and redirect.phtml -
 * make sure that LocalSettings.php is correctly set!
 * @deprecated
 */
/** 
 *	@global string $wgScript
 */
$wgScript           = "{$wgScriptPath}/index.php";
/**
 *	@global string $wgRedirectScript
 */
$wgRedirectScript   = "{$wgScriptPath}/redirect.php";
/**#@-*/


/**#@+
 * @global string
 */
/**
 * style path as seen by users
 * @global string $wgStylePath
 */
$wgStylePath   = "{$wgScriptPath}/skins";
/**
 * filesystem stylesheets directory
 * @global string $wgStyleDirectory
 */
$wgStyleDirectory = "{$IP}/skins";
$wgStyleSheetPath = &$wgStylePath;
$wgStyleSheetDirectory = &$wgStyleDirectory;
$wgArticlePath      = "{$wgScript}?title=$1";
$wgUploadPath       = "{$wgScriptPath}/upload";
$wgUploadDirectory	= "{$IP}/upload";
$wgHashedUploadDirectory	= true;
$wgLogo				= "{$wgUploadPath}/wiki.png";
$wgMathPath         = "{$wgUploadPath}/math";
$wgMathDirectory    = "{$wgUploadDirectory}/math";
$wgTmpDirectory     = "{$wgUploadDirectory}/tmp";
$wgUploadBaseUrl    = "";
/**#@-*/

/**
 * If you operate multiple wikis, you can define a shared upload path here.
 * Uploads to this wiki will NOT be put there - they will be put into
 * $wgUploadDirectory.
 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
 * no file of the given name is found in the local repository (for [[Image:..]],
 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
 * directory.
 */
$wgUseSharedUploads = false;
/** Full path on the web server where shared uploads can be found */
$wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
/** Path on the file system where shared uploads can be found */
$wgSharedUploadDirectory = "/var/www/wiki3/images";

/**
 * Set the following to false especially if you have a set of files that need to
 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
 * directory layout.
 */
$wgHashedSharedUploadDirectory = true;

/** set true if the repository uses latin1 filenames */
$wgSharedLatin1=false;

/**
 * Base URL for a repository wiki. Leave this blank if uploads are just stored
 * in a shared directory and not meant to be accessible through a separate wiki.
 * Otherwise the image description pages on the local wiki will link to the
 * image description page on this wiki.
 *
 * Please specify the namespace, as in the example below.
 */
$wgRepositoryBaseUrl="http://commons.wikimedia.org/wiki/Image:";


#
# Email settings
#

/**
 * Site admin email address
 * Default to wikiadmin@SERVER_NAME
 * @global string $wgEmergencyContact
 */
$wgEmergencyContact = 'wikiadmin@' . $wgServerName;

/**
 * Password reminder email address
 * The address we should use as sender when a user is requesting his password
 * Default to apache@SERVER_NAME
 * @global string $wgPasswordSender
 */
$wgPasswordSender	= 'Wikipedia Mail <apache@' . $wgServerName . '>';

/**
 * dummy address which should be accepted during mail send action
 * It might be necessay to adapt the address or to set it equal
 * to the $wgEmergencyContact address
 */
#$wgNoReplyAddress	= $wgEmergencyContact;
$wgNoReplyAddress	= 'reply@not.possible';

/**
 * Set to true to enable the e-mail basic features:
 * Password reminders, etc. If sending e-mail on your
 * server doesn't work, you might want to disable this.
 * @global bool $wgEnableEmail
 */
$wgEnableEmail = true;

/**
 * Set to true to enable user-to-user e-mail.
 * This can potentially be abused, as it's hard to track.
 * @global bool $wgEnableUserEmail
 */
$wgEnableUserEmail = true;

/**
 * SMTP Mode
 * For using a direct (authenticated) SMTP server connection. 
 * Default to false or fill an array :
 * <code>
 * "host" => 'SMTP domain',
 * "IDHost" => 'domain for MessageID',
 * "port" => "25",
 * "auth" => true/false,
 * "username" => user,
 * "password" => password
 * </code>
 *
 * @global mixed $wgSMTP
 */
$wgSMTP				= false;


/**#@+
 * Database settings
 */
/** database host name or ip address */
$wgDBserver         = 'localhost';
/** name of the database */
$wgDBname           = 'wikidb';
/** */
$wgDBconnection     = '';
/** Database username */
$wgDBuser           = 'wikiuser';
/** Database type
 * "mysql" for working code and "PostgreSQL" for development/broken code
 */
$wgDBtype           = "mysql";
/** Search type
 * "MyISAM" for MySQL native full text search, "Tsearch2" for PostgreSQL
 * based search engine
 */
$wgSearchType	    = "MyISAM";
/** Table name prefix */
$wgDBprefix         = ''; 
/** Database schema
 * on some databases this allows separate 
 * logical namespace for application data
 */
$wgDBschema	    = 'mediawiki';
/**#@-*/


/**
 * Shared database for multiple wikis. Presently used for storing a user table
 * for single sign-on. The server for this database must be the same as for the
 * main database.
 * EXPERIMENTAL
 */
$wgSharedDB = null;

# Database load balancer
# This is a two-dimensional array, an array of server info structures
# Fields are: 
#   host:      Host name
#   dbname:    Default database name
#   user:      DB user
#   password:  DB password
#   type:      "mysql" or "pgsql"
#   load:      ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
#   flags:     bit field
#                 DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
#                 DBO_DEBUG -- equivalent of $wgDebugDumpSql
#                 DBO_TRX -- wrap entire request in a transaction
#                 DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
#                 DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
#
# Leave at false to use the single-server variables above
$wgDBservers		= false; 

/** How long to wait for a slave to catch up to the master */ 
$wgMasterWaitTimeout = 10;

# Sysop SQL queries
#   The sql user shouldn't have too many rights other the database, restrict
#   it to SELECT only on 'cur' table for example
#
$wgAllowSysopQueries = false; # Dangerous if not configured properly.
$wgDBsqluser		= 'sqluser';
$wgDBsqlpassword	= 'sqlpass';
$wgDBpassword       = 'userpass';
$wgSqlLogFile           = "{$wgUploadDirectory}/sqllog_mFhyRe6";
$wgDBerrorLog		= false; # File to log MySQL errors to

# wgDBminWordLen :
#  MySQL 3.x : used to discard words that MySQL will not return any results for
#  shorter values configure mysql directly
#  MySQL 4.x : ignore it and configure mySQL
# See: http://dev.mysql.com/doc/mysql/en/Fulltext_Fine-tuning.html
$wgDBminWordLen     = 4;
$wgDBtransactions	= false; # Set to true if using InnoDB tables
$wgDBmysql4			= false; # Set to true to use enhanced fulltext search
$wgSqlTimeout		= 30;

$wgBufferSQLResults     = true; # use buffered queries by default

# Other wikis on this site, can be administered from a single developer account
# Array, interwiki prefix => database name
$wgLocalDatabases   = array();


# Memcached settings
# See docs/memcached.doc
#
$wgMemCachedDebug   = false; # Will be set to false in Setup.php, if the server isn't working
$wgUseMemCached     = false;
$wgMemCachedServers = array( '127.0.0.1:11000' );
$wgMemCachedDebug   = false;
$wgSessionsInMemcached = false;
$wgLinkCacheMemcached = false; # Not fully tested

/**
 * Turck MMCache shared memory
 * You can use this for persistent caching where your wiki runs on a single 
 * server. Enabled by default if Turck is installed. Mutually exclusive with
 * memcached, memcached is used if both are specified.
 *
 * @global bool $wgUseTurckShm Enable or disabled Turck MMCache
 */
$wgUseTurckShm      = false;


# Language settings
#
/**
 * Site language code
 * Default to 'en'. Should be one of ./language/Language(.*).php
 * @global string $wgLanguageCode
 */
$wgLanguageCode     = 'en';

/**
 * Filename of a language file generated by dumpMessages.php
 * @global string|false $wgLanguageFile (default:false)
 */
$wgLanguageFile     = false;
/**
 * Treat language links as magic connectors, not inline links
 * @global bool $wgInterwikiMagic (default:true)
 */
$wgInterwikiMagic	= true;
$wgInputEncoding	= 'ISO-8859-1'; # LanguageUtf8.php normally overrides this
$wgOutputEncoding	= 'ISO-8859-1'; # unless you set the next option to true:
$wgUseLatin1 		= false; # Enable ISO-8859-1 compatibility mode
$wgEditEncoding		= '';

# Set this to eg 'ISO-8859-1' to perform character set
# conversion when loading old revisions not marked with
# "utf-8" flag. Use this when converting wiki to UTF-8
# without the burdensome mass conversion of old text data.
#
# NOTE! This DOES NOT touch any fields other than old_text.
# Titles, comments, user names, etc still must be converted
# en masse in the database before continuing as a UTF-8 wiki.
$wgLegacyEncoding   = false;

$wgMimeType			= 'text/html';
$wgDocType			= '-//W3C//DTD XHTML 1.0 Transitional//EN';
$wgDTD				= 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
$wgUseDynamicDates  = false; # Enable to allow rewriting dates in page text
							 # DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES
$wgAmericanDates    = false; # Enable for English module to print dates
							 # as eg 'May 12' instead of '12 May'
$wgTranslateNumerals = true; # For Hindi and Arabic use local numerals instead
                             # of Western style (0-9) numerals in interface.


# Translation using MediaWiki: namespace
# This will increase load times by 25-60% unless memcached is installed
# Interface messages will be get from the database.
$wgUseDatabaseMessages = true;
$wgMsgCacheExpiry	= 86400;
$wgPartialMessageCache = false;

# Whether to enable language variant conversion. Currently only zh 
# supports this function, to convert between Traditional and Simplified
# Chinese. This flag is meant to isolate the (untested) conversion 
# code, so that if it breaks, only zh will be affected
$wgDisableLangConversion = false;

# Whether to use zhdaemon to perform Chinese text processing
# zhdaemon is under developement, so normally you don't want to
# use it unless for testing
$wgUseZhdaemon = false;
$wgZhdaemonHost="localhost";
$wgZhdaemonPort=2004;

# Miscellaneous configuration settings
#

$wgLocalInterwiki   = 'w';
$wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table

$wgShowIPinHeader	= true; # For non-logged in users
$wgMaxNameChars     = 32; # Maximum number of bytes in username

$wgExtraSubtitle	= '';
$wgSiteSupportPage	= ''; # A page where you users can receive donations

$wgReadOnlyFile         = "{$wgUploadDirectory}/lock_yBgMBwiR";
$wgUseData = false ;

/**
 * The debug log file should be not be publicly accessible if it is used, as it
 * may contain private data. */
$wgDebugLogFile         = '';

/**#@+
 * @global bool
 */
$wgDebugRedirects		= false;
$wgDebugRawPage         = false; # Avoid overlapping debug entries by leaving out CSS

$wgDebugComments        = false;
$wgReadOnly             = false;
$wgLogQueries           = false;
$wgDebugDumpSql         = false;

/** Whether to disable automatic generation of "we're sorry, but there has been
 * a database error" pages. */
$wgIgnoreSQLErrors      = false;

# Should [[Category:Dog]] on a page associate it with the
# category "Dog"? (a link to that category page will be
# added to the article, clicking it reveals a list of
# all articles in the category)
$wgUseCategoryMagic		= true;

/**
 * disable experimental dmoz-like category browsing. Output things like:
 * Encyclopedia > Music > Style of Music > Jazz
 */
$wgUseCategoryBrowser   = false;

$wgEnablePersistentLC	= false;	# Obsolete, do not use
$wgCompressedPersistentLC = true; # use gzcompressed blobs
$wgUseOldExistenceCheck = false;  # use old prefill link method, for debugging only

/**
 * Keep parsed pages in a cache (objectcache table, turck, or memcached)
 * to speed up output of the same page viewed by another user with the
 * same options.
 *
 * This can provide a significant speedup for medium to large pages,
 * so you probably want to keep it on.
 */
$wgEnableParserCache = true;

/**#@-*/

/**
 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
 * values are easier on the database. A value of 1 causes the counters to be
 * updated on every hit, any higher value n cause them to update *on average*
 * every n hits. Should be set to either 1 or something largish, eg 1000, for
 * maximum efficiency.
*/
$wgHitcounterUpdateFreq = 1;

# User rights settings
#
#  It's not 100% safe, there could be security hole using that one. Use at your
# own risks.

$wgWhitelistEdit = false;   # true = user must login to edit.
$wgWhitelistRead = false;	# Pages anonymous user may see, like: = array ( ":Main_Page", "Special:Userlogin", "Wikipedia:Help");
$wgWhitelistAccount = array ( 'user' => 1, 'sysop' => 1, 'developer' => 1 );

$wgAllowAnonymousMinor = false; # Allow anonymous users to mark changes as 'minor'

$wgSysopUserBans        = false; # Allow sysops to ban logged-in users
$wgSysopRangeBans		= false; # Allow sysops to ban IP ranges
$wgDefaultBlockExpiry	= '24 hours'; # default expiry time
                                # strtotime format, or "infinite" for an infinite block
$wgAutoblockExpiry		= 86400; # Number of seconds before autoblock entries expire

# Proxy scanner settings
#
#
# If you enable this, every editor's IP address will be scanned for open
# HTTP proxies.
#
# Don't enable this. Many sysops will report "hostile TCP port scans" to
# your ISP and ask for your server to be shut down. 
#
# You have been warned.
#
$wgBlockOpenProxies = false; # Automatic open proxy test on edit
$wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
$wgProxyScriptPath = "$IP/proxy_check.php";
$wgProxyMemcExpiry = 86400;
$wgProxyKey = 'W1svekXc5u6lZllTZOwnzEk1nbs';
$wgProxyList = array();  # big list of banned IP addresses, in the keys not the values

# Number of accounts each IP address may create, 0 to disable.
# Requires memcached
$wgAccountCreationThrottle = 0;


# Client-side caching:
$wgCachePages       = true; # Allow client-side caching of pages

# Set this to current time to invalidate all prior cached pages.
# Affects both client- and server-side caching.
$wgCacheEpoch = '20030516000000';


# Server-side caching:
#  This will cache static pages for non-logged-in users
#  to reduce database traffic on public sites.
#  Must set $wgShowIPinHeader = false
$wgUseFileCache = false;
$wgFileCacheDirectory = "{$wgUploadDirectory}/cache";

# When using the file cache, we can store the cached HTML gzipped to save disk
# space. Pages will then also be served compressed to clients that support it.
# THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
# the default LocalSettings.php! If you enable this, remove that setting first.
#
# Requires zlib support enabled in PHP.
$wgUseGzip = false;


# Email notification settings
#

# Program to run when the email is actually sent out. You might want to make
# your server beep for example with:
#
#  $wgEmailNotificationSystembeep = '/usr/bin/beep -f 4000 -l 20 &';
#
# Usermailer.php will make a system() call with exactly that string as parameter
$wgEmailNotificationSystembeep	= '';

# For email notification on page changes
$wgPasswordSender = $wgEmergencyContact;

# true: from PageEditor if s/he opted-in
# false: Enotif mails appear to come from $wgEmergencyContact
$wgEmailNotificationMailsSentFromPageEditor	= false; 

# If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
# If set to false, the corresponding input form on the user preference page is suppressed
# It call this to be a "user-preferences-option (UPO)"
$wgEmailAuthentication				= true; # UPO (if this is set to false, texts referring to authentication are suppressed)
$wgEmailNotificationForWatchlistPages		= false; # UPO
$wgEmailNotificationForUserTalkPages		= false;	# UPO
$wgEmailNotificationRevealPageEditorAddress	= false;	# UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
$wgEmailNotificationForMinorEdits		= true;	# UPO; false: "minor edits" on pages do not trigger notification mails.
#							# Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)


# Show watching users in recent changes, watchlist and page history views
$wgRCShowWatchingUsers 				= false; # UPO
# Show watching users in Page views
$wgPageShowWatchingUsers 			= false;
# Show "Updated (since my last visit)" marker in RC view, watchlist and history view for watched pages with new changes
$wgShowUpdatedMarker 				= true; # UPO

$wgCookieExpiration = 2592000;

# Squid-related settings
#

# Enable/disable Squid
 $wgUseSquid = false;
 
# If you run Squid3 with ESI support, enable this (default:false):
 $wgUseESI = false;
 
# Internal server name as known to Squid, if different
# $wgInternalServer = 'http://yourinternal.tld:8000';
 $wgInternalServer = $wgServer;
 
# Cache timeout for the squid, will be sent as s-maxage (without ESI) or 
# Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in the Squid config.
# 18000 seconds = 5 hours, more cache hits with 2678400 = 31 days
 $wgSquidMaxage = 18000;
 
# A list of proxy servers (ips if possible) to purge on changes
# don't specify ports here (80 is default)
# $wgSquidServers = array('127.0.0.1');
$wgSquidServersNoPurge = array();

# Maximum number of titles to purge in any one client operation
$wgMaxSquidPurgeTitles = 400;


# Cookie settings:
#   Set to set an explicit domain on the login cookies
#   eg, "justthis.domain.org" or ".any.subdomain.net"
$wgCookieDomain = '';
$wgCookiePath = '/';
$wgDisableCookieCheck = false;

# Whether to allow inline image pointing to other websites
$wgAllowExternalImages = true;

$wgMiserMode = false; # Disable database-intensive features
$wgDisableQueryPages = false; # Disable all query pages if miser mode is on, not just some
$wgUseWatchlistCache = false; # Generate a watchlist once every hour or so
$wgWLCacheTimeout = 3600;     # The hour or so mentioned above

# To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory
# of the MediaWiki package and have latex, dvips, gs (ghostscript), and
# convert (ImageMagick) installed and available in the PATH.
# Please see math/README for more information.
$wgUseTeX = false;
$wgTexvc = './math/texvc'; # Location of the texvc binary

# Profiling / debugging
$wgProfiling = false; # Enable for more detailed by-function times in debug log
$wgProfileLimit = 0.0; # Only record profiling info for pages that took longer than this
$wgProfileOnly = false; # Don't put non-profiling info into log file
$wgProfileToDatabase = false; # Log sums from profiling into "profiling" table in db.
$wgProfileSampleRate = 1; # Only profile every n requests when profiling is turned on
$wgProfileCallTree = false; # If true, print a raw call tree instead of per-function report

$wgDebugProfiling = false; # Detects non-matching wfProfileIn/wfProfileOut calls
$wgDebugFunctionEntry = 0; # Output debug message on every wfProfileIn/wfProfileOut
$wgDebugSquid = false; # Lots of debugging output from SquidUpdate.php

$wgDisableCounters = false;
$wgDisableTextSearch = false;
$wgDisableSearchUpdate = false; # If you've disabled search semi-permanently, this also disables updates to the table. If you ever re-enable, be sure to rebuild the search table.
$wgDisableUploads = true; # Uploads have to be specially set up to be secure
$wgRemoteUploads = false; # Set to true to enable the upload _link_ while local uploads are disabled. Assumes that the special page link will be bounced to another server where uploads do work.
$wgDisableAnonTalk = false;

# Path to the GNU diff3 utility. If the file doesn't exist,
# edit conflicts will fall back to the old behaviour (no merging).
$wgDiff3 = '/usr/bin/diff3';


# We can also compress text in the old revisions table. If this is set on,
# old revisions will be compressed on page save if zlib support is available.
# Any compressed revisions will be decompressed on load regardless of this
# setting *but will not be readable at all* if zlib support is not available.
$wgCompressRevisions = false;

# This is the list of preferred extensions for uploading files. Uploading
# files with extensions not in this list will trigger a warning.
$wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg', 'ogg' );

# Files with these extensions will never be allowed as uploads.
$wgFileBlacklist = array(
	# HTML may contain cookie-stealing JavaScript and web bugs
	'html', 'htm',
	# PHP scripts may execute arbitrary code on the server
	'php', 'phtml', 'php3', 'php4', 'phps',
	# Other types that may be interpreted by some servers
	'shtml', 'jhtml', 'pl', 'py', 'cgi',
	# May contain harmful executables for Windows victims
	'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );

# This is a flag to determine whether or not to check file extensions on
# upload.
$wgCheckFileExtensions = true;

# If this is turned off, users may override the warning for files not
# covered by $wgFileExtensions.
$wgStrictFileExtensions = true;

# Warn if uploaded files are larger than this
$wgUploadSizeWarning = 150000;

$wgPasswordSalt = true; # For compatibility with old installations set to false

# Which namespaces should support subpages?
# See Language.php for a list of namespaces.
#
$wgNamespacesWithSubpages = array( -1 => 0, 0 => 0, 1 => 1,
  2 => 1, 3 => 1, 4 => 0, 5 => 1, 6 => 0, 7 => 1, 8 => 0, 9 => 1, 10 => 0, 11 => 1);

$wgNamespacesToBeSearchedDefault = array( -1 => 0, 0 => 1, 1 => 0,
  2 => 0, 3 => 0, 4 => 0, 5 => 0, 6 => 0, 7 => 0, 8 => 0, 9 => 1, 10 => 0, 11 => 1 );

# If set, a bold ugly notice will show up at the top of every page.
$wgSiteNotice = "";

## Set $wgUseImageResize to true if you want to enable dynamic
## server side image resizing ("Thumbnails")
# 
$wgUseImageResize		= false;

## Resizing can be done using PHP's internal image libraries
## or using ImageMagick. The later supports more file formats
## than PHP, which only supports PNG, GIF, JPG, XBM and WBMP.
##
## Set $wgUseImageMagick to true to use Image Magick instead
## of the builtin functions
#
$wgUseImageMagick		= false;
$wgImageMagickConvertCommand    = '/usr/bin/convert';

# Scalable Vector Graphics (SVG) may be uploaded as images.
# Since SVG support is not yet standard in browsers, it is
# necessary to rasterize SVGs to PNG as a fallback format.
#
# An external program is required to perform this conversion:
$wgSVGConverters = array(
	'ImageMagick' => '$path/convert -background white -geometry $width $input $output',
	'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
	'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
	'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
	);
$wgSVGConverter = 'ImageMagick'; # Pick one of the above
$wgSVGConverterPath = ''; # If not in the executable PATH, specify

if( !isset( $wgCommandLineMode ) ) {
	$wgCommandLineMode = false;
}

/** Show seconds in Recent Changes */
$wgRCSeconds = false;

/** Log IP addresses in the recentchanges table */
$wgPutIPinRC = false;

# Recentchanges items are periodically purged;
# entries older than this many seconds will go.
$wgRCMaxAge = 7 * 24 * 3600; # our one week cutoff

/** RDF metadata toggles */
$wgEnableDublinCoreRdf = false;
$wgEnableCreativeCommonsRdf = false;

/** Override for copyright metadata.
 * TODO: these options need documentation
 */
$wgRightsPage = NULL;
$wgRightsUrl = NULL;
$wgRightsText = NULL;
$wgRightsIcon = NULL;

/** Set this to some HTML to override the rights icon with an arbitrary logo */
$wgCopyrightIcon = NULL;

/** Set this to true if you want detailed copyright information forms on Upload. */
$wgUseCopyrightUpload = false;

/** Set this to false if you want to disable checking that detailed copyright
 * information values are not empty. */
$wgCheckCopyrightUpload = true;


/**
 * Set this to false to avoid forcing the first letter of links to capitals.
 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
 * appearing with a capital at the beginning of a sentence will *not* go to the
 * same place as links in the middle of a sentence using a lowercase initial.
 */
$wgCapitalLinks = true;

/**
 * List of interwiki prefixes for wikis we'll accept as sources for
 * Special:Import (for sysops). Since complete page history# can be imported,
 * these should be 'trusted'.
 */
$wgImportSources = array();

/**
 * Set this to the number of authors that you want to be credited below an
 * article text. Set it to zero to hide the attribution block, and a negative
 * number (like -1) to show all authors. Note that this will# require 2-3 extra
 * database hits, which can have a not insignificant impact on performance for
 * large wikis.
 */
$wgMaxCredits = 0;

/** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
 * Otherwise, link to a separate credits page. */
$wgShowCreditsIfMax = true;

/** Text matching this regular expression will be recognised as spam
 * See http://en.wikipedia.org/wiki/Regular_expression */
$wgSpamRegex = false; 
/** Similarly if this function returns true */
$wgFilterCallback = false;

/** Go button goes straight to the edit screen if the article doesn't exist. */
$wgGoToEdit = false;

/** Allow limited user-specified HTML in wiki pages?
 * It  will be run through a whitelist for security. Set this to false if you
 * want wiki pages to consist only of wiki markup. Note that replacements do not
 * yet exist for all HTML constructs.*/
$wgUserHtml = true;

/** Allow raw, unchecked HTML in <html>...</html> sections.
 * THIS IS VERY DANGEROUS on a publically editable site, so you can't enable it
 * unless you've restricted editing to trusted users only with $wgWhitelistEdit.
 */
$wgRawHtml = false;

/**
 * $wgUseTidy: use tidy to make sure HTML output is sane.
 * This should only be enabled if $wgUserHtml is true.
 * tidy is a free tool that fixes broken HTML.
 * See http://www.w3.org/People/Raggett/tidy/
 * $wgTidyBin should be set to the path of the binary and
 * $wgTidyConf to the path of the configuration file.
 * $wgTidyOpts can include any number of parameters.
 */
$wgUseTidy = false;
$wgTidyBin = 'tidy';
$wgTidyConf = $IP.'/extensions/tidy/tidy.conf'; 
$wgTidyOpts = '';

/** See list of skins and their symbolic names in languagel/Language.php */
$wgDefaultSkin = 'monobook';

# Settings added to this array will override the language globals for
# the user preferences used by anonymous visitors and newly created
# accounts. (See names and sample values in languages/Language.php)
#
# For instance, to disable section editing links:
#   $wgDefaultUserOptions['editsection'] = 0;
#
$wgDefaultUserOptions = array();

/** Whether or not to allow and use real name fields. Defaults to true. */
$wgAllowRealName = true;

/** Use XML parser? */
$wgUseXMLparser = false ;

/** Extensions */
$wgSkinExtensionFunctions = array();
$wgExtensionFunctions = array();

/** Allow user Javascript page? */
$wgAllowUserJs = true;

/** Allow user Cascading Style Sheets (CSS)? */
$wgAllowUserCss = true;

/** Use the site's Javascript page? */
$wgUseSiteJs = true;

/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
	
/** Filter for Special:Randompage. Part of a WHERE clause */
$wgExtraRandompageSQL = false;

/** Allow the "info" action, very inefficient at the moment */
$wgAllowPageInfo = false;

/** Maximum indent level of toc. */
$wgMaxTocLevel = 999;

/** Recognise longitude/latitude coordinates */
$wgUseGeoMode = false;

/** Validation for print or other production versions */
$wgUseValidation = false;

/** Use external C++ diff engine (module wikidiff from the extensions package) */
$wgUseExternalDiffEngine = false;

/** Use RC Patrolling to check for vandalism */
$wgUseRCPatrol = true;

/** Set maximum number of results to return in syndication feeds (RSS, Atom) for
 * eg Recentchanges, Newpages. */
$wgFeedLimit = 50;

/** _Minimum_ timeout for cached Recentchanges feed, in seconds.
 * A cached version will continue to be served out even if changes
 * are made, until this many seconds runs out since the last render. */
$wgFeedCacheTimeout = 60;

/** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
 * pages larger than this size. */
$wgFeedDiffCutoff = 32768;


/**
 * Additional namespaces. If the namespaces defined in Language.php and
 * Namespace.php are insufficient,# you can create new ones here, for example,
 * to import Help files in other languages.
 * PLEASE  NOTE: Once you delete a namespace, the pages in that namespace will
 * no longer be accessible. If you rename it, then you can access them through
 * the new namespace name.
 * 
 * Custom namespaces should start at 100 and stop at 255 (hard limit set by
 * database).
 */
#$wgExtraNamespaces =
#	array(100 => "Hilfe",
#	      101 => "Hilfe_Diskussion",
#	      102 => "Aide",
#	      103 => "Discussion_Aide"
#	      );
$wgExtraNamespaces = NULL;

/**
 * Enable SOAP interface. Off by default
 * SOAP is a protocoll for remote procedure calls (RPC) using http as
 * middleware. This interface can be used by bots or special clients to receive
 * articles from a wiki.
 * Most bots use the normal HTTP interface and don't use SOAP.
 * If unsure, set to false.
 */
$wgEnableSOAP = false;

/**
 * Limit images on image description pages to a user-selectable limit. In order
 * to reduce disk usage, limits can only be selected from a list. This is the
 * list of settings the user can choose from:
 */
$wgImageLimits = array (
	array(320,240),
	array(640,480),
	array(800,600),
	array(1024,768),
	array(1280,1024),
	array(10000,10000) );


/** Navigation links for the user sidebar.
 * 'text' is the name of the MediaWiki message that contains the label of this link
 * 'href' is the name of the MediaWiki message that contains the link target of this link.
 *        Link targets starting with http are considered remote links. Ones not starting with
 *        http are considered as names of local wiki pages.
 */
$wgNavigationLinks = array (
	array( 'text'=>'mainpage',	'href'=>'mainpage' ),
	array( 'text'=>'portal',	'href'=>'portal-url' ),
	array( 'text'=>'currentevents', 'href'=>'currentevents-url' ),
	array( 'text'=>'recentchanges', 'href'=>'recentchanges-url' ),
	array( 'text'=>'randompage',	'href'=>'randompage-url' ),
	array( 'text'=>'help', 		'href'=>'helppage' ),
	array( 'text'=>'sitesupport',	'href'=>'sitesupport-url' ),
);

/**
 *  On  category pages, show thumbnail gallery for images belonging to that
 * category instead of listing them as articles.
 */
$wgCategoryMagicGallery = true;

/**
 * Browser Blacklist for unicode non compliant browsers
 * Contains a list of regexps : "/regexp/"  matching problematic browsers
 */
$wgBrowserBlackList = array(
	"/Mozilla\/4\.78 \[en\] \(X11; U; Linux/"
	// FIXME: Add some accurate, true things here
	);

/**
 * Fake out the timezone that the server thinks it's in. This will be used for
 * date display and not for what's stored in the DB. Leave to null to retain
 * your server's OS-based timezone value. This is the same as the timezone.
 */
# $wgLocaltimezone = 'GMT';
# $wgLocaltimezone = 'PST8PDT';
# $wgLocaltimezone = 'Europe/Sweden';
# $wgLocaltimezone = 'CET';
$wgLocaltimezone = null;

/**
 * User level management
 * The number is the database id of a group you want users to be attached by
 * default. A better interface should be coded [av]
 */
$wgAnonGroupId = 1;
$wgLoggedInGroupId = 2;
$wgSysopGroupId = 3;
$wgBureaucratGroupId = 4;

/**
 * When translating messages with wfMsg(), it is not always clear what should be
 * considered UI messages and what shoud be content messages.
 *
 * For example, for regular wikipedia site like en, there should be only one
 * 'mainpage', therefore when getting the link of 'mainpage', we should treate
 * it as content of the site and call wfMsgForContent(), while for rendering the
 * text of the link, we call wfMsg(). The code in default behaves this way.
 * However, sites like common do offer different versions of 'mainpage' and the
 * like for different languages. This array provides a way to override the
 * default behavior. For example, to allow language specific mainpage and
 * community portal, set
 *
 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
 */
$wgForceUIMsgAsContentMsg = array();


/**
 * Authentication plugin.
 */
$wgAuth = null;

/**
 * Global list of hooks.
 * Add a hook by doing:
 *     $wgHooks['event_name'][] = $function;
 * or:
 *     $wgHooks['event_name'][] = array($function, $data);
 * or:
 *     $wgHooks['event_name'][] = array($object, 'method');
 */	
$wgHooks = array();

/**
 * Experimental preview feature to fetch rendered text
 * over an XMLHttpRequest from JavaScript instead of
 * forcing a submit and reload of the whole page.
 * Leave disabled unless you're testing it.
 */
$wgLivePreview = false;

/**
 * Disable the internal MySQL-based search, to allow it to be
 * implemented by an extension instead.
 */
$wgDisableInternalSearch = false;

/**
 * Set this to a URL to forward search requests to some external location.
 * If the URL includes '$1', this will be replaced with the URL-encoded
 * search term.
 * 
 * For example, to forward to Google you'd have something like:
 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
 *                       '&domains=http://example.com' .
 *                       '&sitesearch=http://example.com' .
 *                       '&ie=utf-8&oe=utf-8';
 */
$wgSearchForwardUrl = null;

/**
 * If true, external URL links in wiki text will be given the
 * rel="nofollow" attribute as a hint to search engines that
 * they should not be followed for ranking purposes as they
 * are user-supplied and thus subject to spamming.
 */
$wgNoFollowLinks = true;

} else {
	die();
}
?>