3 * Default values for configuration settings.
9 * To customize your installation, edit "LocalSettings.php". If you make
10 * changes here, they will be lost on next upgrade of MediaWiki!
12 * In this file, variables whose default values depend on other
13 * variables are set to false. The actual default value of these variables
14 * will only be set in Setup.php, taking into account any custom settings
15 * performed in LocalSettings.php.
17 * Documentation is in the source and on:
18 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2 of the License, or
23 * (at your option) any later version.
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
30 * You should have received a copy of the GNU General Public License along
31 * with this program; if not, write to the Free Software Foundation, Inc.,
32 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
33 * http://www.gnu.org/copyleft/gpl.html
39 * @cond file_level_code
40 * This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
42 if( !defined( 'MEDIAWIKI' ) ) {
43 echo "This file is part of MediaWiki and is not a valid entry point\n";
47 # Create a site configuration object. Not used for much in a default install.
48 # Note: this (and other things) will break if the autoloader is not enabled.
49 # Please include includes/AutoLoader.php before including this file.
50 $wgConf = new SiteConfiguration
;
53 /** MediaWiki version number */
54 $wgVersion = '1.20alpha';
56 /** Name of the site. It must be changed in LocalSettings.php */
57 $wgSitename = 'MediaWiki';
64 * $wgServer = 'http://example.com';
67 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
68 * wrong server, it will redirect incorrectly after you save a page. In that
69 * case, set this variable to fix it.
71 * If you want to use protocol-relative URLs on your wiki, set this to a
72 * protocol-relative URL like '//example.com' and set $wgCanonicalServer
73 * to a fully qualified URL.
75 $wgServer = WebRequest
::detectServer();
78 * Canonical URL of the server, to use in IRC feeds and notification e-mails.
79 * Must be fully qualified, even if $wgServer is protocol-relative.
81 * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
83 $wgCanonicalServer = false;
85 /************************************************************************//**
86 * @name Script path settings
91 * The path we should point to.
92 * It might be a virtual path in case with use apache mod_rewrite for example.
94 * This *needs* to be set correctly.
96 * Other paths will be set to defaults based on it unless they are directly
97 * set in LocalSettings.php
99 $wgScriptPath = '/wiki';
102 * Whether to support URLs like index.php/Page_title These often break when PHP
103 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
104 * but then again it may not; lighttpd converts incoming path data to lowercase
105 * on systems with case-insensitive filesystems, and there have been reports of
106 * problems on Apache as well.
108 * To be safe we'll continue to keep it off by default.
110 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
111 * incorrect garbage, or to true if it is really correct.
113 * The default $wgArticlePath will be set based on this value at runtime, but if
114 * you have customized it, having this incorrectly set to true can cause
115 * redirect loops when "pretty URLs" are used.
118 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
119 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
120 ( strpos( php_sapi_name(), 'isapi' ) === false );
123 * The extension to append to script names by default. This can either be .php
126 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
127 * variable is provided to support those providers.
129 $wgScriptExtension = '.php';
134 /************************************************************************//**
135 * @name URLs and file paths
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
140 * These will relatively rarely need to be set manually, unless you are
141 * splitting style sheets or images outside the main document root.
143 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
144 * the host part, that starts with a slash. In most cases a full URL is also
145 * acceptable. A "directory" is a local file path.
147 * In both paths and directories, trailing slashes should not be included.
153 * The URL path to index.php.
155 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
160 * The URL path to redirect.php. This is a script that is used by the Nostalgia
163 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
165 $wgRedirectScript = false;
168 * The URL path to load.php.
170 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
172 $wgLoadScript = false;
175 * The URL path of the skins directory.
176 * Defaults to "{$wgScriptPath}/skins".
178 $wgStylePath = false;
179 $wgStyleSheetPath = &$wgStylePath;
182 * The URL path of the skins directory. Should not point to an external domain.
183 * Defaults to "{$wgScriptPath}/skins".
185 $wgLocalStylePath = false;
188 * The URL path of the extensions directory.
189 * Defaults to "{$wgScriptPath}/extensions".
192 $wgExtensionAssetsPath = false;
195 * Filesystem stylesheets directory.
196 * Defaults to "{$IP}/skins".
198 $wgStyleDirectory = false;
201 * The URL path for primary article page views. This path should contain $1,
202 * which is replaced by the article title.
204 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1",
205 * depending on $wgUsePathInfo.
207 $wgArticlePath = false;
210 * The URL path for the images directory.
211 * Defaults to "{$wgScriptPath}/images".
213 $wgUploadPath = false;
216 * The filesystem path of the images directory. Defaults to "{$IP}/images".
218 $wgUploadDirectory = false;
221 * Directory where the cached page will be saved.
222 * Defaults to "{$wgUploadDirectory}/cache".
224 $wgFileCacheDirectory = false;
227 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
228 * Defaults to "{$wgStylePath}/common/images/wiki.png".
233 * The URL path of the shortcut icon.
235 $wgFavicon = '/favicon.ico';
238 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
239 * Defaults to no icon.
241 $wgAppleTouchIcon = false;
244 * The local filesystem path to a temporary directory. This is not required to
247 * When this setting is set to false, its value will be set through a call
248 * to wfTempDir(). See that methods implementation for the actual detection
251 * Developers should use the global function wfTempDir() instead of this
255 * @note Default changed to false in MediaWiki 1.20.
258 $wgTmpDirectory = false;
261 * If set, this URL is added to the start of $wgUploadPath to form a complete
264 $wgUploadBaseUrl = '';
267 * To enable remote on-demand scaling, set this to the thumbnail base URL.
268 * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
269 * where 'e6' are the first two characters of the MD5 hash of the file name.
270 * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
272 $wgUploadStashScalerBaseUrl = false;
275 * To set 'pretty' URL paths for actions other than
276 * plain page views, add to this array. For instance:
277 * 'edit' => "$wgScriptPath/edit/$1"
279 * There must be an appropriate script or rewrite rule
280 * in place to handle these URLs.
282 $wgActionPaths = array();
286 /************************************************************************//**
287 * @name Files and file uploads
291 /** Uploads have to be specially set up to be secure */
292 $wgEnableUploads = false;
295 * The maximum age of temporary (incomplete) uploaded files
297 $wgUploadStashMaxAge = 6 * 3600; // 6 hours
299 /** Allows to move images and other media files */
300 $wgAllowImageMoving = true;
303 * These are additional characters that should be replaced with '-' in file names
305 $wgIllegalFileChars = ":";
308 * @deprecated since 1.17 use $wgDeletedDirectory
310 $wgFileStore = array();
313 * What directory to place deleted uploads in
315 $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted
318 * Set this to true if you use img_auth and want the user to see details on why access failed.
320 $wgImgAuthDetails = false;
323 * If this is enabled, img_auth.php will not allow image access unless the wiki
324 * is private. This improves security when image uploads are hosted on a
327 $wgImgAuthPublicTest = true;
330 * File repository structures
332 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
333 * an array of such structures. Each repository structure is an associative
334 * array of properties configuring the repository.
336 * Properties required for all repos:
337 * - class The class name for the repository. May come from the core or an extension.
338 * The core repository classes are FileRepo, LocalRepo, ForeignDBRepo.
339 * FSRepo is also supported for backwards compatibility.
341 * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
342 * The name should consist of alpha-numberic characters.
343 * - backend A file backend name (see $wgFileBackends).
345 * For most core repos:
346 * - zones Associative array of zone names that each map to an array with:
347 * container : backend container name the zone is in
348 * directory : root path within container for the zone
349 * url : base URL to the root of the zone
350 * Zones default to using "<repo name>-<zone name>" as the container name
351 * and default to using the container root as the zone's root directory.
352 * Nesting of zone locations within other zones should be avoided.
353 * - url Public zone URL. The 'zones' settings take precedence.
354 * - hashLevels The number of directory levels for hash-based division of files
355 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
356 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
358 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
359 * determines whether filenames implicitly start with a capital letter.
360 * The current implementation may give incorrect description page links
361 * when the local $wgCapitalLinks and initialCapital are mismatched.
362 * - pathDisclosureProtection
363 * May be 'paranoid' to remove all parameters from error messages, 'none' to
364 * leave the paths in unchanged, or 'simple' to replace paths with
365 * placeholders. Default for LocalRepo is 'simple'.
366 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
368 * - directory The local filesystem directory where public files are stored. Not used for
370 * - thumbDir The base thumbnail directory. Defaults to "<directory>/thumb".
371 * - thumbUrl The base thumbnail URL. Defaults to "<url>/thumb".
374 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
375 * for local repositories:
376 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
377 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
378 * http://en.wikipedia.org/w
379 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
380 * $wgScriptExtension, e.g. .php5 defaults to .php
382 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
383 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
384 * $wgFetchCommonsDescriptions.
387 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
388 * equivalent to the corresponding member of $wgDBservers
389 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
390 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
393 * - apibase Use for the foreign API's URL
394 * - apiThumbCacheExpiry How long to locally cache thumbs for
396 * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
397 * Otherwise, set $wgLocalFileRepo to a repository structure as described above.
398 * If you set $wgUseInstantCommons to true, it will add an entry for Commons.
399 * If you set $wgForeignFileRepos to an array of repostory structures, those will
400 * be searched after the local file repo.
401 * Otherwise, you will only have access to local media files.
403 * @see Setup.php for an example usage and default initialization.
405 $wgLocalFileRepo = false;
407 /** @see $wgLocalFileRepo */
408 $wgForeignFileRepos = array();
411 * Use Commons as a remote file repository. Essentially a wrapper, when this
412 * is enabled $wgForeignFileRepos will point at Commons with a set of default
415 $wgUseInstantCommons = false;
418 * File backend structure configuration.
419 * This is an array of file backend configuration arrays.
420 * Each backend configuration has the following parameters:
421 * 'name' : A unique name for the backend
422 * 'class' : The file backend class to use
423 * 'wikiId' : A unique string that identifies the wiki (container prefix)
424 * 'lockManager' : The name of a lock manager (see $wgLockManagers)
425 * Additional parameters are specific to the class used.
427 $wgFileBackends = array();
430 * Array of configuration arrays for each lock manager.
431 * Each backend configuration has the following parameters:
432 * 'name' : A unique name for the lock manger
433 * 'class' : The lock manger class to use
434 * Additional parameters are specific to the class used.
436 $wgLockManagers = array();
439 * Show EXIF data, on by default if available.
440 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
442 * NOTE FOR WINDOWS USERS:
443 * To enable EXIF functions, add the following lines to the
444 * "Windows extensions" section of php.ini:
446 * extension=extensions/php_mbstring.dll
447 * extension=extensions/php_exif.dll
449 $wgShowEXIF = function_exists( 'exif_read_data' );
452 * If to automatically update the img_metadata field
453 * if the metadata field is outdated but compatible with the current version.
456 $wgUpdateCompatibleMetadata = false;
459 * If you operate multiple wikis, you can define a shared upload path here.
460 * Uploads to this wiki will NOT be put there - they will be put into
461 * $wgUploadDirectory.
462 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
463 * no file of the given name is found in the local repository (for [[File:..]],
464 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
467 * Note that these configuration settings can now be defined on a per-
468 * repository basis for an arbitrary number of file repositories, using the
469 * $wgForeignFileRepos variable.
471 $wgUseSharedUploads = false;
473 /** Full path on the web server where shared uploads can be found */
474 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
476 /** Fetch commons image description pages and display them on the local wiki? */
477 $wgFetchCommonsDescriptions = false;
479 /** Path on the file system where shared uploads can be found. */
480 $wgSharedUploadDirectory = "/var/www/wiki3/images";
482 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
483 $wgSharedUploadDBname = false;
485 /** Optional table prefix used in database. */
486 $wgSharedUploadDBprefix = '';
488 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
489 $wgCacheSharedUploads = true;
492 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
493 * The timeout for copy uploads is set by $wgHTTPTimeout.
494 * You have to assign the user right 'upload_by_url' to a user group, to use this.
496 $wgAllowCopyUploads = false;
499 * Allow asynchronous copy uploads.
500 * This feature is experimental and broken as of r81612.
502 $wgAllowAsyncCopyUploads = false;
505 * A list of domains copy uploads can come from
507 $wgCopyUploadsDomains = array();
510 * Max size for uploads, in bytes. If not set to an array, applies to all
511 * uploads. If set to an array, per upload type maximums can be set, using the
512 * file and url keys. If the * key is set this value will be used as maximum
513 * for non-specified types.
516 * $wgMaxUploadSize = array(
518 * 'url' => 500 * 1024,
520 * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
521 * will have a maximum of 500 kB.
524 $wgMaxUploadSize = 1024*1024*100; # 100MB
527 * Point the upload navigation link to an external URL
528 * Useful if you want to use a shared repository by default
529 * without disabling local uploads (use $wgEnableUploads = false for that)
530 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
532 $wgUploadNavigationUrl = false;
535 * Point the upload link for missing files to an external URL, as with
536 * $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=<filename>"
537 * appended to it as appropriate.
539 $wgUploadMissingFileUrl = false;
542 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
543 * generating them on render and outputting a static URL. This is necessary if some of your
544 * apache servers don't have read/write access to the thumbnail path.
547 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
549 $wgThumbnailScriptPath = false;
550 $wgSharedThumbnailScriptPath = false;
553 * Set this to false if you do not want MediaWiki to divide your images
554 * directory into many subdirectories, for improved performance.
556 * It's almost always good to leave this enabled. In previous versions of
557 * MediaWiki, some users set this to false to allow images to be added to the
558 * wiki by simply copying them into $wgUploadDirectory and then running
559 * maintenance/rebuildImages.php to register them in the database. This is no
560 * longer recommended, use maintenance/importImages.php instead.
562 * Note that this variable may be ignored if $wgLocalFileRepo is set.
564 $wgHashedUploadDirectory = true;
567 * Set the following to false especially if you have a set of files that need to
568 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
571 $wgHashedSharedUploadDirectory = true;
574 * Base URL for a repository wiki. Leave this blank if uploads are just stored
575 * in a shared directory and not meant to be accessible through a separate wiki.
576 * Otherwise the image description pages on the local wiki will link to the
577 * image description page on this wiki.
579 * Please specify the namespace, as in the example below.
581 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
584 * This is the list of preferred extensions for uploading files. Uploading files
585 * with extensions not in this list will trigger a warning.
587 * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
588 * such as odt or doc, and untrusted users are allowed to upload files, then
589 * your wiki will be vulnerable to cross-site request forgery (CSRF).
591 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
593 /** Files with these extensions will never be allowed as uploads. */
594 $wgFileBlacklist = array(
595 # HTML may contain cookie-stealing JavaScript and web bugs
596 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
597 # PHP scripts may execute arbitrary code on the server
598 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
599 # Other types that may be interpreted by some servers
600 'shtml', 'jhtml', 'pl', 'py', 'cgi',
601 # May contain harmful executables for Windows victims
602 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
605 * Files with these mime types will never be allowed as uploads
606 * if $wgVerifyMimeType is enabled.
608 $wgMimeTypeBlacklist = array(
609 # HTML may contain cookie-stealing JavaScript and web bugs
610 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
611 # PHP scripts may execute arbitrary code on the server
612 'application/x-php', 'text/x-php',
613 # Other types that may be interpreted by some servers
614 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
615 # Client-side hazards on Internet Explorer
616 'text/scriptlet', 'application/x-msdownload',
617 # Windows metafile, client-side vulnerability on some systems
618 'application/x-msmetafile',
622 * Allow Java archive uploads.
623 * This is not recommended for public wikis since a maliciously-constructed
624 * applet running on the same domain as the wiki can steal the user's cookies.
626 $wgAllowJavaUploads = false;
629 * This is a flag to determine whether or not to check file extensions on upload.
631 * WARNING: setting this to false is insecure for public wikis.
633 $wgCheckFileExtensions = true;
636 * If this is turned off, users may override the warning for files not covered
637 * by $wgFileExtensions.
639 * WARNING: setting this to false is insecure for public wikis.
641 $wgStrictFileExtensions = true;
644 * Setting this to true will disable the upload system's checks for HTML/JavaScript.
645 * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
646 * TO RESTRICT UPLOADING to only those that you trust
648 $wgDisableUploadScriptChecks = false;
650 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
651 $wgUploadSizeWarning = false;
654 * list of trusted media-types and mime types.
655 * Use the MEDIATYPE_xxx constants to represent media types.
656 * This list is used by File::isSafeFile
658 * Types not listed here will have a warning about unsafe content
659 * displayed on the images description page. It would also be possible
660 * to use this for further restrictions, like disabling direct
661 * [[media:...]] links for non-trusted formats.
663 $wgTrustedMediaFormats = array(
664 MEDIATYPE_BITMAP
, //all bitmap formats
665 MEDIATYPE_AUDIO
, //all audio formats
666 MEDIATYPE_VIDEO
, //all plain video formats
667 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
668 "application/pdf", //PDF files
669 #"application/x-shockwave-flash", //flash/shockwave movie
673 * Plugins for media file type handling.
674 * Each entry in the array maps a MIME type to a class name
676 $wgMediaHandlers = array(
677 'image/jpeg' => 'JpegHandler',
678 'image/png' => 'PNGHandler',
679 'image/gif' => 'GIFHandler',
680 'image/tiff' => 'TiffHandler',
681 'image/x-ms-bmp' => 'BmpHandler',
682 'image/x-bmp' => 'BmpHandler',
683 'image/x-xcf' => 'XCFHandler',
684 'image/svg+xml' => 'SvgHandler', // official
685 'image/svg' => 'SvgHandler', // compat
686 'image/vnd.djvu' => 'DjVuHandler', // official
687 'image/x.djvu' => 'DjVuHandler', // compat
688 'image/x-djvu' => 'DjVuHandler', // compat
692 * Resizing can be done using PHP's internal image libraries or using
693 * ImageMagick or another third-party converter, e.g. GraphicMagick.
694 * These support more file formats than PHP, which only supports PNG,
695 * GIF, JPG, XBM and WBMP.
697 * Use Image Magick instead of PHP builtin functions.
699 $wgUseImageMagick = false;
700 /** The convert command shipped with ImageMagick */
701 $wgImageMagickConvertCommand = '/usr/bin/convert';
702 /** The identify command shipped with ImageMagick */
703 $wgImageMagickIdentifyCommand = '/usr/bin/identify';
705 /** Sharpening parameter to ImageMagick */
706 $wgSharpenParameter = '0x0.4';
708 /** Reduction in linear dimensions below which sharpening will be enabled */
709 $wgSharpenReductionThreshold = 0.85;
712 * Temporary directory used for ImageMagick. The directory must exist. Leave
713 * this set to false to let ImageMagick decide for itself.
715 $wgImageMagickTempDir = false;
718 * Use another resizing converter, e.g. GraphicMagick
719 * %s will be replaced with the source path, %d with the destination
720 * %w and %h will be replaced with the width and height.
722 * Example for GraphicMagick:
724 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
727 * Leave as false to skip this.
729 $wgCustomConvertCommand = false;
732 * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some image formats.
734 $wgExiv2Command = '/usr/bin/exiv2';
737 * Scalable Vector Graphics (SVG) may be uploaded as images.
738 * Since SVG support is not yet standard in browsers, it is
739 * necessary to rasterize SVGs to PNG as a fallback format.
741 * An external program is required to perform this conversion.
742 * If set to an array, the first item is a PHP callable and any further items
743 * are passed as parameters after $srcPath, $dstPath, $width, $height
745 $wgSVGConverters = array(
746 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
747 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
748 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
749 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
750 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
751 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
752 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
755 /** Pick a converter defined in $wgSVGConverters */
756 $wgSVGConverter = 'ImageMagick';
758 /** If not in the executable PATH, specify the SVG converter path. */
759 $wgSVGConverterPath = '';
761 /** Don't scale a SVG larger than this */
762 $wgSVGMaxSize = 2048;
764 /** Don't read SVG metadata beyond this point.
765 * Default is 1024*256 bytes
767 $wgSVGMetadataCutoff = 262144;
770 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
771 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
772 * crap files as images. When this directive is on, "<title>" will be allowed in files with
773 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
774 * and doesn't send appropriate MIME types for SVG images.
776 $wgAllowTitlesInSVG = false;
779 * The maximum number of pixels a source image can have if it is to be scaled
780 * down by a scaler that requires the full source image to be decompressed
781 * and stored in decompressed form, before the thumbnail is generated.
783 * This provides a limit on memory usage for the decompression side of the
784 * image scaler. The limit is used when scaling PNGs with any of the
785 * built-in image scalers, such as ImageMagick or GD. It is ignored for
786 * JPEGs with ImageMagick, and when using the VipsScaler extension.
788 * The default is 50 MB if decompressed to RGBA form, which corresponds to
789 * 12.5 million pixels or 3500x3500.
791 $wgMaxImageArea = 1.25e7
;
793 * Force thumbnailing of animated GIFs above this size to a single
794 * frame instead of an animated thumbnail. As of MW 1.17 this limit
795 * is checked against the total size of all frames in the animation.
796 * It probably makes sense to keep this equal to $wgMaxImageArea.
798 $wgMaxAnimatedGifArea = 1.25e7
;
800 * Browsers don't support TIFF inline generally...
801 * For inline display, we need to convert to PNG or JPEG.
802 * Note scaling should work with ImageMagick, but may not with GD scaling.
806 * // PNG is lossless, but inefficient for photos
807 * $wgTiffThumbnailType = array( 'png', 'image/png' );
808 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
809 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
812 $wgTiffThumbnailType = false;
815 * If rendered thumbnail files are older than this timestamp, they
816 * will be rerendered on demand as if the file didn't already exist.
817 * Update if there is some need to force thumbs and SVG rasterizations
818 * to rerender, such as fixes to rendering bugs.
820 $wgThumbnailEpoch = '20030516000000';
823 * If set, inline scaled images will still produce "<img>" tags ready for
824 * output instead of showing an error message.
826 * This may be useful if errors are transitory, especially if the site
827 * is configured to automatically render thumbnails on request.
829 * On the other hand, it may obscure error conditions from debugging.
830 * Enable the debug log or the 'thumbnail' log group to make sure errors
831 * are logged to a file for review.
833 $wgIgnoreImageErrors = false;
836 * Allow thumbnail rendering on page view. If this is false, a valid
837 * thumbnail URL is still output, but no file will be created at
838 * the target location. This may save some time if you have a
839 * thumb.php or 404 handler set up which is faster than the regular
842 $wgGenerateThumbnailOnParse = true;
845 * Show thumbnails for old images on the image description page
847 $wgShowArchiveThumbnails = true;
849 /** Obsolete, always true, kept for compatibility with extensions */
850 $wgUseImageResize = true;
853 * If set to true, images that contain certain the exif orientation tag will
854 * be rotated accordingly. If set to null, try to auto-detect whether a scaler
855 * is available that can rotate.
857 $wgEnableAutoRotation = null;
860 * Internal name of virus scanner. This servers as a key to the
861 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
862 * null, every file uploaded will be scanned for viruses.
867 * Configuration for different virus scanners. This an associative array of
868 * associative arrays. It contains one setup array per known scanner type.
869 * The entry is selected by $wgAntivirus, i.e.
870 * valid values for $wgAntivirus are the keys defined in this array.
872 * The configuration array for each scanner contains the following keys:
873 * "command", "codemap", "messagepattern":
875 * "command" is the full command to call the virus scanner - %f will be
876 * replaced with the name of the file to scan. If not present, the filename
877 * will be appended to the command. Note that this must be overwritten if the
878 * scanner is not in the system path; in that case, plase set
879 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
882 * "codemap" is a mapping of exit code to return codes of the detectVirus
883 * function in SpecialUpload.
884 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
885 * the scan to be failed. This will pass the file if $wgAntivirusRequired
887 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
888 * the file to have an usupported format, which is probably imune to
889 * virusses. This causes the file to pass.
890 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
891 * no virus was found.
892 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
894 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
896 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
897 * output. The relevant part should be matched as group one (\1).
898 * If not defined or the pattern does not match, the full message is shown to the user.
900 $wgAntivirusSetup = array(
904 'command' => "clamscan --no-summary ",
907 "0" => AV_NO_VIRUS
, # no virus
908 "1" => AV_VIRUS_FOUND
, # virus found
909 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
910 "*" => AV_SCAN_FAILED
, # else scan failed
913 'messagepattern' => '/.*?:(.*)/sim',
918 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
919 $wgAntivirusRequired = true;
921 /** Determines if the mime type of uploaded files should be checked */
922 $wgVerifyMimeType = true;
924 /** Sets the mime type definition file to use by MimeMagic.php. */
925 $wgMimeTypeFile = "includes/mime.types";
926 #$wgMimeTypeFile= "/etc/mime.types";
927 #$wgMimeTypeFile= null; #use built-in defaults only.
929 /** Sets the mime type info file to use by MimeMagic.php. */
930 $wgMimeInfoFile= "includes/mime.info";
931 #$wgMimeInfoFile= null; #use built-in defaults only.
934 * Switch for loading the FileInfo extension by PECL at runtime.
935 * This should be used only if fileinfo is installed as a shared object
936 * or a dynamic library.
938 $wgLoadFileinfoExtension = false;
940 /** Sets an external mime detector program. The command must print only
941 * the mime type to standard output.
942 * The name of the file to process will be appended to the command given here.
943 * If not set or NULL, mime_content_type will be used if available.
946 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
949 $wgMimeDetectorCommand = null;
952 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
953 * things, because only a few types of images are needed and file extensions
956 $wgTrivialMimeDetection = false;
959 * Additional XML types we can allow via mime-detection.
960 * array = ( 'rootElement' => 'associatedMimeType' )
962 $wgXMLMimeTypes = array(
963 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
964 'svg' => 'image/svg+xml',
965 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
966 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
967 'html' => 'text/html', // application/xhtml+xml?
971 * Limit images on image description pages to a user-selectable limit. In order
972 * to reduce disk usage, limits can only be selected from a list.
973 * The user preference is saved as an array offset in the database, by default
974 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
975 * change it if you alter the array (see bug 8858).
976 * This is the list of settings the user can choose from:
978 $wgImageLimits = array(
987 * Adjust thumbnails on image pages according to a user setting. In order to
988 * reduce disk usage, the values can only be selected from a list. This is the
989 * list of settings the user can choose from:
991 $wgThumbLimits = array(
1001 * Default parameters for the "<gallery>" tag
1003 $wgGalleryOptions = array (
1004 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
1005 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
1006 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
1007 'captionLength' => 25, // Length of caption to truncate (in characters)
1008 'showBytes' => true, // Show the filesize in bytes in categories
1012 * Adjust width of upright images when parameter 'upright' is used
1013 * This allows a nicer look for upright images without the need to fix the width
1014 * by hardcoded px in wiki sourcecode.
1016 $wgThumbUpright = 0.75;
1019 * Default value for chmoding of new directories.
1021 $wgDirectoryMode = 0777;
1025 * Path of the djvudump executable
1026 * Enable this and $wgDjvuRenderer to enable djvu rendering
1028 # $wgDjvuDump = 'djvudump';
1032 * Path of the ddjvu DJVU renderer
1033 * Enable this and $wgDjvuDump to enable djvu rendering
1035 # $wgDjvuRenderer = 'ddjvu';
1036 $wgDjvuRenderer = null;
1039 * Path of the djvutxt DJVU text extraction utility
1040 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
1042 # $wgDjvuTxt = 'djvutxt';
1046 * Path of the djvutoxml executable
1047 * This works like djvudump except much, much slower as of version 3.5.
1049 * For now I recommend you use djvudump instead. The djvuxml output is
1050 * probably more stable, so we'll switch back to it as soon as they fix
1051 * the efficiency problem.
1052 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
1054 # $wgDjvuToXML = 'djvutoxml';
1055 $wgDjvuToXML = null;
1059 * Shell command for the DJVU post processor
1060 * Default: pnmtopng, since ddjvu generates ppm output
1061 * Set this to false to output the ppm file directly.
1063 $wgDjvuPostProcessor = 'pnmtojpeg';
1065 * File extension for the DJVU post processor output
1067 $wgDjvuOutputExtension = 'jpg';
1069 /** @} */ # end of file uploads }
1071 /************************************************************************//**
1072 * @name Email settings
1076 $serverName = substr( $wgServer, strrpos( $wgServer, '/' ) +
1 );
1079 * Site admin email address.
1081 $wgEmergencyContact = 'wikiadmin@' . $serverName;
1084 * Password reminder email address.
1086 * The address we should use as sender when a user is requesting his password.
1088 $wgPasswordSender = 'apache@' . $serverName;
1090 unset( $serverName ); # Don't leak local variables to global scope
1093 * Password reminder name
1095 $wgPasswordSenderName = 'MediaWiki Mail';
1098 * Dummy address which should be accepted during mail send action.
1099 * It might be necessary to adapt the address or to set it equal
1100 * to the $wgEmergencyContact address.
1102 $wgNoReplyAddress = 'reply@not.possible';
1105 * Set to true to enable the e-mail basic features:
1106 * Password reminders, etc. If sending e-mail on your
1107 * server doesn't work, you might want to disable this.
1109 $wgEnableEmail = true;
1112 * Set to true to enable user-to-user e-mail.
1113 * This can potentially be abused, as it's hard to track.
1115 $wgEnableUserEmail = true;
1118 * Set to true to put the sending user's email in a Reply-To header
1119 * instead of From. ($wgEmergencyContact will be used as From.)
1121 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1122 * which can cause problems with SPF validation and leak recipient addressses
1123 * when bounces are sent to the sender.
1125 $wgUserEmailUseReplyTo = false;
1128 * Minimum time, in hours, which must elapse between password reminder
1129 * emails for a given account. This is to prevent abuse by mail flooding.
1131 $wgPasswordReminderResendTime = 24;
1134 * The time, in seconds, when an emailed temporary password expires.
1136 $wgNewPasswordExpiry = 3600 * 24 * 7;
1139 * The time, in seconds, when an email confirmation email expires
1141 $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
1145 * For using a direct (authenticated) SMTP server connection.
1146 * Default to false or fill an array :
1148 * "host" => 'SMTP domain',
1149 * "IDHost" => 'domain for MessageID',
1151 * "auth" => true/false,
1152 * "username" => user,
1153 * "password" => password
1159 * Additional email parameters, will be passed as the last argument to mail() call.
1160 * If using safe_mode this has no effect
1162 $wgAdditionalMailParams = null;
1165 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1166 * from $wgEmergencyContact
1168 $wgEnotifFromEditor = false;
1170 // TODO move UPO to preferences probably ?
1171 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1172 # If set to false, the corresponding input form on the user preference page is suppressed
1173 # It call this to be a "user-preferences-option (UPO)"
1176 * Require email authentication before sending mail to an email addres. This is
1177 * highly recommended. It prevents MediaWiki from being used as an open spam
1180 $wgEmailAuthentication = true;
1183 * Allow users to enable email notification ("enotif") on watchlist changes.
1185 $wgEnotifWatchlist = false;
1188 * Allow users to enable email notification ("enotif") when someone edits their
1191 $wgEnotifUserTalk = false;
1194 * Set the Reply-to address in notifications to the editor's address, if user
1195 * allowed this in the preferences.
1197 $wgEnotifRevealEditorAddress = false;
1200 * Send notification mails on minor edits to watchlist pages. This is enabled
1201 * by default. Does not affect user talk notifications.
1203 $wgEnotifMinorEdits = true;
1206 * Send a generic mail instead of a personalised mail for each user. This
1207 * always uses UTC as the time zone, and doesn't include the username.
1209 * For pages with many users watching, this can significantly reduce mail load.
1210 * Has no effect when using sendmail rather than SMTP.
1212 $wgEnotifImpersonal = false;
1215 * Maximum number of users to mail at once when using impersonal mail. Should
1216 * match the limit on your mail server.
1218 $wgEnotifMaxRecips = 500;
1221 * Send mails via the job queue. This can be useful to reduce the time it
1222 * takes to save a page that a lot of people are watching.
1224 $wgEnotifUseJobQ = false;
1227 * Use real name instead of username in e-mail "from" field.
1229 $wgEnotifUseRealName = false;
1232 * Array of usernames who will be sent a notification email for every change
1233 * which occurs on a wiki. Users will not be notified of their own changes.
1235 $wgUsersNotifiedOnAllChanges = array();
1238 /** @} */ # end of email settings
1240 /************************************************************************//**
1241 * @name Database settings
1244 /** Database host name or IP address */
1245 $wgDBserver = 'localhost';
1246 /** Database port number (for PostgreSQL) */
1248 /** Name of the database */
1249 $wgDBname = 'my_wiki';
1250 /** Database username */
1251 $wgDBuser = 'wikiuser';
1252 /** Database user's password */
1254 /** Database type */
1255 $wgDBtype = 'mysql';
1257 /** Separate username for maintenance tasks. Leave as null to use the default. */
1258 $wgDBadminuser = null;
1259 /** Separate password for maintenance tasks. Leave as null to use the default. */
1260 $wgDBadminpassword = null;
1264 * Leave as null to select the default search engine for the
1265 * selected database type (eg SearchMySQL), or set to a class
1266 * name to override to a custom search engine.
1268 $wgSearchType = null;
1270 /** Table name prefix */
1272 /** MySQL table options to use during installation or update */
1273 $wgDBTableOptions = 'ENGINE=InnoDB';
1276 * SQL Mode - default is turning off all modes, including strict, if set.
1277 * null can be used to skip the setting for performance reasons and assume
1278 * DBA has done his best job.
1279 * String override can be used for some additional fun :-)
1283 /** Mediawiki schema */
1284 $wgDBmwschema = 'mediawiki';
1286 /** To override default SQLite data directory ($docroot/../data) */
1287 $wgSQLiteDataDir = '';
1290 * Make all database connections secretly go to localhost. Fool the load balancer
1291 * thinking there is an arbitrarily large cluster of servers to connect to.
1292 * Useful for debugging.
1294 $wgAllDBsAreLocalhost = false;
1297 * Shared database for multiple wikis. Commonly used for storing a user table
1298 * for single sign-on. The server for this database must be the same as for the
1301 * For backwards compatibility the shared prefix is set to the same as the local
1302 * prefix, and the user table is listed in the default list of shared tables.
1303 * The user_properties table is also added so that users will continue to have their
1304 * preferences shared (preferences were stored in the user table prior to 1.16)
1306 * $wgSharedTables may be customized with a list of tables to share in the shared
1307 * datbase. However it is advised to limit what tables you do share as many of
1308 * MediaWiki's tables may have side effects if you try to share them.
1311 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1316 /** @see $wgSharedDB */
1317 $wgSharedPrefix = false;
1318 /** @see $wgSharedDB */
1319 $wgSharedTables = array( 'user', 'user_properties' );
1322 * Database load balancer
1323 * This is a two-dimensional array, an array of server info structures
1326 * - dbname: Default database name
1328 * - password: DB password
1329 * - type: "mysql" or "postgres"
1330 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1331 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1332 * to several groups, the most specific group defined here is used.
1334 * - flags: bit field
1335 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1336 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1337 * - DBO_TRX -- wrap entire request in a transaction
1338 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1339 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1340 * - DBO_PERSISTENT -- enables persistent database connections
1342 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1343 * - max threads: (optional) Maximum number of running threads
1345 * These and any other user-defined properties will be assigned to the mLBInfo member
1346 * variable of the Database object.
1348 * Leave at false to use the single-server variables above. If you set this
1349 * variable, the single-server variables will generally be ignored (except
1350 * perhaps in some command-line scripts).
1352 * The first server listed in this array (with key 0) will be the master. The
1353 * rest of the servers will be slaves. To prevent writes to your slaves due to
1354 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1355 * slaves in my.cnf. You can set read_only mode at runtime using:
1358 * SET @@read_only=1;
1361 * Since the effect of writing to a slave is so damaging and difficult to clean
1362 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1363 * our masters, and then set read_only=0 on masters at runtime.
1365 $wgDBservers = false;
1368 * Load balancer factory configuration
1369 * To set up a multi-master wiki farm, set the class here to something that
1370 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1371 * The class identified here is responsible for reading $wgDBservers,
1372 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1374 * The LBFactory_Multi class is provided for this purpose, please see
1375 * includes/db/LBFactory_Multi.php for configuration information.
1377 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1379 /** How long to wait for a slave to catch up to the master */
1380 $wgMasterWaitTimeout = 10;
1382 /** File to log database errors to */
1383 $wgDBerrorLog = false;
1385 /** When to give an error message */
1386 $wgDBClusterTimeout = 10;
1389 * Scale load balancer polling time so that under overload conditions, the database server
1390 * receives a SHOW STATUS query at an average interval of this many microseconds
1392 $wgDBAvgStatusPoll = 2000;
1395 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1396 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1398 * WARNING: THIS IS EXPERIMENTAL!
1400 * May break if you're not using the table defs from mysql5/tables.sql.
1401 * May break if you're upgrading an existing wiki if set differently.
1402 * Broken symptoms likely to include incorrect behavior with page titles,
1403 * usernames, comments etc containing non-ASCII characters.
1404 * Might also cause failures on the object cache and other things.
1406 * Even correct usage may cause failures with Unicode supplementary
1407 * characters (those not in the Basic Multilingual Plane) unless MySQL
1408 * has enhanced their Unicode support.
1410 $wgDBmysql5 = false;
1413 * Other wikis on this site, can be administered from a single developer
1415 * Array numeric key => database name
1417 $wgLocalDatabases = array();
1420 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1421 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1422 * show a more obvious warning.
1424 $wgSlaveLagWarning = 10;
1425 /** @see $wgSlaveLagWarning */
1426 $wgSlaveLagCritical = 30;
1429 * Use old names for change_tags indices.
1431 $wgOldChangeTagsIndex = false;
1433 /**@}*/ # End of DB settings }
1436 /************************************************************************//**
1437 * @name Text storage
1442 * We can also compress text stored in the 'text' table. If this is set on, new
1443 * revisions will be compressed on page save if zlib support is available. Any
1444 * compressed revisions will be decompressed on load regardless of this setting
1445 * *but will not be readable at all* if zlib support is not available.
1447 $wgCompressRevisions = false;
1450 * External stores allow including content
1451 * from non database sources following URL links
1453 * Short names of ExternalStore classes may be specified in an array here:
1454 * $wgExternalStores = array("http","file","custom")...
1456 * CAUTION: Access to database might lead to code execution
1458 $wgExternalStores = false;
1461 * An array of external mysql servers, e.g.
1462 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
1463 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
1465 $wgExternalServers = array();
1468 * The place to put new revisions, false to put them in the local text table.
1469 * Part of a URL, e.g. DB://cluster1
1471 * Can be an array instead of a single string, to enable data distribution. Keys
1472 * must be consecutive integers, starting at zero. Example:
1474 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1478 $wgDefaultExternalStore = false;
1481 * Revision text may be cached in $wgMemc to reduce load on external storage
1482 * servers and object extraction overhead for frequently-loaded revisions.
1484 * Set to 0 to disable, or number of seconds before cache expiry.
1486 $wgRevisionCacheExpiry = 0;
1488 /** @} */ # end text storage }
1490 /************************************************************************//**
1491 * @name Performance hacks and limits
1494 /** Disable database-intensive features */
1495 $wgMiserMode = false;
1496 /** Disable all query pages if miser mode is on, not just some */
1497 $wgDisableQueryPages = false;
1498 /** Number of rows to cache in 'querycache' table when miser mode is on */
1499 $wgQueryCacheLimit = 1000;
1500 /** Number of links to a page required before it is deemed "wanted" */
1501 $wgWantedPagesThreshold = 1;
1502 /** Enable slow parser functions */
1503 $wgAllowSlowParserFunctions = false;
1504 /** Allow schema updates */
1505 $wgAllowSchemaUpdates = true;
1508 * Do DELETE/INSERT for link updates instead of incremental
1510 $wgUseDumbLinkUpdate = false;
1513 * Anti-lock flags - bitfield
1514 * - ALF_PRELOAD_LINKS:
1515 * Preload links during link update for save
1516 * - ALF_PRELOAD_EXISTENCE:
1517 * Preload cur_id during replaceLinkHolders
1518 * - ALF_NO_LINK_LOCK:
1519 * Don't use locking reads when updating the link table. This is
1520 * necessary for wikis with a high edit rate for performance
1521 * reasons, but may cause link table inconsistency
1522 * - ALF_NO_BLOCK_LOCK:
1523 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1526 $wgAntiLockFlags = 0;
1529 * Maximum article size in kilobytes
1531 $wgMaxArticleSize = 2048;
1534 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1535 * raise PHP's memory limit if it's below this amount.
1537 $wgMemoryLimit = "50M";
1539 /** @} */ # end performance hacks }
1541 /************************************************************************//**
1542 * @name Cache settings
1547 * Directory for caching data in the local filesystem. Should not be accessible
1548 * from the web. Set this to false to not use any local caches.
1550 * Note: if multiple wikis share the same localisation cache directory, they
1551 * must all have the same set of extensions. You can set a directory just for
1552 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1554 $wgCacheDirectory = false;
1557 * Main cache type. This should be a cache with fast access, but it may have
1558 * limited space. By default, it is disabled, since the database is not fast
1559 * enough to make it worthwhile.
1563 * - CACHE_ANYTHING: Use anything, as long as it works
1564 * - CACHE_NONE: Do not cache
1565 * - CACHE_DB: Store cache objects in the DB
1566 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
1567 * - CACHE_ACCEL: APC, XCache or WinCache
1568 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1569 * database. This is slow, and is not recommended for
1570 * anything other than debugging.
1571 * - (other): A string may be used which identifies a cache
1572 * configuration in $wgObjectCaches.
1574 * @see $wgMessageCacheType, $wgParserCacheType
1576 $wgMainCacheType = CACHE_NONE
;
1579 * The cache type for storing the contents of the MediaWiki namespace. This
1580 * cache is used for a small amount of data which is expensive to regenerate.
1582 * For available types see $wgMainCacheType.
1584 $wgMessageCacheType = CACHE_ANYTHING
;
1587 * The cache type for storing article HTML. This is used to store data which
1588 * is expensive to regenerate, and benefits from having plenty of storage space.
1590 * For available types see $wgMainCacheType.
1592 $wgParserCacheType = CACHE_ANYTHING
;
1595 * The cache type for storing language conversion tables,
1596 * which are used when parsing certain text and interface messages.
1598 * For available types see $wgMainCacheType.
1600 $wgLanguageConverterCacheType = CACHE_ANYTHING
;
1603 * Advanced object cache configuration.
1605 * Use this to define the class names and constructor parameters which are used
1606 * for the various cache types. Custom cache types may be defined here and
1607 * referenced from $wgMainCacheType, $wgMessageCacheType, $wgParserCacheType,
1608 * or $wgLanguageConverterCacheType.
1610 * The format is an associative array where the key is a cache identifier, and
1611 * the value is an associative array of parameters. The "class" parameter is the
1612 * class name which will be used. Alternatively, a "factory" parameter may be
1613 * given, giving a callable function which will generate a suitable cache object.
1615 * The other parameters are dependent on the class used.
1616 * - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you
1619 $wgObjectCaches = array(
1620 CACHE_NONE
=> array( 'class' => 'EmptyBagOStuff' ),
1621 CACHE_DB
=> array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
1622 CACHE_DBA
=> array( 'class' => 'DBABagOStuff' ),
1624 CACHE_ANYTHING
=> array( 'factory' => 'ObjectCache::newAnything' ),
1625 CACHE_ACCEL
=> array( 'factory' => 'ObjectCache::newAccelerator' ),
1626 CACHE_MEMCACHED
=> array( 'factory' => 'ObjectCache::newMemcached' ),
1628 'apc' => array( 'class' => 'APCBagOStuff' ),
1629 'xcache' => array( 'class' => 'XCacheBagOStuff' ),
1630 'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
1631 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
1632 'memcached-pecl' => array( 'class' => 'MemcachedPeclBagOStuff' ),
1633 'hash' => array( 'class' => 'HashBagOStuff' ),
1637 * The expiry time for the parser cache, in seconds. The default is 86.4k
1638 * seconds, otherwise known as a day.
1640 $wgParserCacheExpireTime = 86400;
1643 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php>
1644 * to use as CACHE_DBA backend.
1646 $wgDBAhandler = 'db3';
1649 * Store sessions in MemCached. This can be useful to improve performance, or to
1650 * avoid the locking behaviour of PHP's default session handler, which tends to
1651 * prevent multiple requests for the same user from acting concurrently.
1653 $wgSessionsInMemcached = false;
1656 * This is used for setting php's session.save_handler. In practice, you will
1657 * almost never need to change this ever. Other options might be 'user' or
1658 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1659 * useful if you're doing cross-application sessions, see bug 11381)
1661 $wgSessionHandler = null;
1663 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1664 $wgMemCachedDebug = false;
1666 /** The list of MemCached servers and port numbers */
1667 $wgMemCachedServers = array( '127.0.0.1:11000' );
1670 * Use persistent connections to MemCached, which are shared across multiple
1673 $wgMemCachedPersistent = false;
1676 * Read/write timeout for MemCached server communication, in microseconds.
1678 $wgMemCachedTimeout = 100000;
1681 * Set this to true to make a local copy of the message cache, for use in
1682 * addition to memcached. The files will be put in $wgCacheDirectory.
1684 $wgUseLocalMessageCache = false;
1687 * Defines format of local cache
1688 * true - Serialized object
1689 * false - PHP source file (Warning - security risk)
1691 $wgLocalMessageCacheSerialized = true;
1694 * Instead of caching everything, keep track which messages are requested and
1695 * load only most used messages. This only makes sense if there is lots of
1696 * interface messages customised in the wiki (like hundreds in many languages).
1698 $wgAdaptiveMessageCache = false;
1701 * Localisation cache configuration. Associative array with keys:
1702 * class: The class to use. May be overridden by extensions.
1704 * store: The location to store cache data. May be 'files', 'db' or
1705 * 'detect'. If set to "files", data will be in CDB files. If set
1706 * to "db", data will be stored to the database. If set to
1707 * "detect", files will be used if $wgCacheDirectory is set,
1708 * otherwise the database will be used.
1710 * storeClass: The class name for the underlying storage. If set to a class
1711 * name, it overrides the "store" setting.
1713 * storeDirectory: If the store class puts its data in files, this is the
1714 * directory it will use. If this is false, $wgCacheDirectory
1717 * manualRecache: Set this to true to disable cache updates on web requests.
1718 * Use maintenance/rebuildLocalisationCache.php instead.
1720 $wgLocalisationCacheConf = array(
1721 'class' => 'LocalisationCache',
1722 'store' => 'detect',
1723 'storeClass' => false,
1724 'storeDirectory' => false,
1725 'manualRecache' => false,
1728 /** Allow client-side caching of pages */
1729 $wgCachePages = true;
1732 * Set this to current time to invalidate all prior cached pages. Affects both
1733 * client- and server-side caching.
1734 * You can get the current date on your server by using the command:
1735 * date +%Y%m%d%H%M%S
1737 $wgCacheEpoch = '20030516000000';
1740 * Bump this number when changing the global style sheets and JavaScript.
1741 * It should be appended in the query string of static CSS and JS includes,
1742 * to ensure that client-side caches do not keep obsolete copies of global
1745 $wgStyleVersion = '303';
1748 * This will cache static pages for non-logged-in users to reduce
1749 * database traffic on public sites.
1750 * Must set $wgShowIPinHeader = false
1751 * ResourceLoader requests to default language and skins are cached
1752 * as well as single module requests.
1754 $wgUseFileCache = false;
1757 * Depth of the subdirectory hierarchy to be created under
1758 * $wgFileCacheDirectory. The subdirectories will be named based on
1759 * the MD5 hash of the title. A value of 0 means all cache files will
1760 * be put directly into the main file cache directory.
1762 $wgFileCacheDepth = 2;
1765 * Keep parsed pages in a cache (objectcache table or memcached)
1766 * to speed up output of the same page viewed by another user with the
1769 * This can provide a significant speedup for medium to large pages,
1770 * so you probably want to keep it on. Extensions that conflict with the
1771 * parser cache should disable the cache on a per-page basis instead.
1773 $wgEnableParserCache = true;
1776 * Append a configured value to the parser cache and the sitenotice key so
1777 * that they can be kept separate for some class of activity.
1779 $wgRenderHashAppend = '';
1782 * If on, the sidebar navigation links are cached for users with the
1783 * current language set. This can save a touch of load on a busy site
1784 * by shaving off extra message lookups.
1786 * However it is also fragile: changing the site configuration, or
1787 * having a variable $wgArticlePath, can produce broken links that
1788 * don't update as expected.
1790 $wgEnableSidebarCache = false;
1793 * Expiry time for the sidebar cache, in seconds
1795 $wgSidebarCacheExpiry = 86400;
1798 * When using the file cache, we can store the cached HTML gzipped to save disk
1799 * space. Pages will then also be served compressed to clients that support it.
1801 * Requires zlib support enabled in PHP.
1806 * Whether MediaWiki should send an ETag header. Seems to cause
1807 * broken behavior with Squid 2.6, see bug 7098.
1811 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1812 * problems when the user requests two pages within a short period of time. This
1813 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1816 $wgClockSkewFudge = 5;
1819 * Invalidate various caches when LocalSettings.php changes. This is equivalent
1820 * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
1821 * was previously done in the default LocalSettings.php file.
1823 * On high-traffic wikis, this should be set to false, to avoid the need to
1824 * check the file modification time, and to avoid the performance impact of
1825 * unnecessary cache invalidations.
1827 $wgInvalidateCacheOnLocalSettingsChange = true;
1829 /** @} */ # end of cache settings
1831 /************************************************************************//**
1832 * @name HTTP proxy (Squid) settings
1834 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
1835 * although they are referred to as Squid settings for historical reasons.
1837 * Achieving a high hit ratio with an HTTP proxy requires special
1838 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
1845 * Enable/disable Squid.
1846 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
1848 $wgUseSquid = false;
1850 /** If you run Squid3 with ESI support, enable this (default:false): */
1853 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1856 /** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
1857 * requests and RSS/Atom feeds. Use this if you have an SSL termination setup
1858 * and need to split the cache between HTTP and HTTPS for API requests,
1859 * feed requests and HTTP redirect responses in order to prevent cache
1860 * pollution. This does not affect 'normal' requests to index.php other than
1863 $wgVaryOnXFP = false;
1866 * Internal server name as known to Squid, if different. Example:
1868 * $wgInternalServer = 'http://yourinternal.tld:8000';
1871 $wgInternalServer = false;
1874 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1875 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1876 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1879 $wgSquidMaxage = 18000;
1882 * Default maximum age for raw CSS/JS accesses
1884 $wgForcedRawSMaxage = 300;
1887 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1889 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1890 * headers sent/modified from these proxies when obtaining the remote IP address
1892 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1894 $wgSquidServers = array();
1897 * As above, except these servers aren't purged on page changes; use to set a
1898 * list of trusted proxies, etc.
1900 $wgSquidServersNoPurge = array();
1902 /** Maximum number of titles to purge in any one client operation */
1903 $wgMaxSquidPurgeTitles = 400;
1906 * Routing configuration for HTCP multicast purging. Add elements here to
1907 * enable HTCP and determine which purges are sent where. If set to an empty
1908 * array, HTCP is disabled.
1910 * Each key in this array is a regular expression to match against the purged
1911 * URL, or an empty string to match all URLs. The purged URL is matched against
1912 * the regexes in the order specified, and the first rule whose regex matches
1915 * Example configuration to send purges for upload.wikimedia.org to one
1916 * multicast group and all other purges to another:
1917 * $wgHTCPMulticastRouting = array(
1918 * '|^https?://upload\.wikimedia\.org|' => array(
1919 * 'host' => '239.128.0.113',
1923 * 'host' => '239.128.0.112',
1928 * @see $wgHTCPMulticastTTL
1930 $wgHTCPMulticastRouting = array();
1933 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
1935 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
1936 * present in the earliest Squid implementations of the protocol.
1938 * This setting is DEPRECATED in favor of $wgHTCPMulticastRouting , and kept
1939 * for backwards compatibility only. If $wgHTCPMulticastRouting is set, this
1940 * setting is ignored. If $wgHTCPMulticastRouting is not set and this setting
1941 * is, it is used to populate $wgHTCPMulticastRouting.
1943 * @deprecated in favor of $wgHTCPMulticastRouting
1945 $wgHTCPMulticastAddress = false;
1948 * HTCP multicast port.
1949 * @deprecated in favor of $wgHTCPMulticastRouting
1950 * @see $wgHTCPMulticastAddress
1955 * HTCP multicast TTL.
1956 * @see $wgHTCPMulticastRouting
1958 $wgHTCPMulticastTTL = 1;
1960 /** Should forwarded Private IPs be accepted? */
1961 $wgUsePrivateIPs = false;
1963 /** @} */ # end of HTTP proxy settings
1965 /************************************************************************//**
1966 * @name Language, regional and character encoding settings
1970 /** Site language code, should be one of ./languages/Language(.*).php */
1971 $wgLanguageCode = 'en';
1974 * Some languages need different word forms, usually for different cases.
1975 * Used in Language::convertGrammar(). Example:
1978 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
1981 $wgGrammarForms = array();
1983 /** Treat language links as magic connectors, not inline links */
1984 $wgInterwikiMagic = true;
1986 /** Hide interlanguage links from the sidebar */
1987 $wgHideInterlanguageLinks = false;
1989 /** List of language names or overrides for default names in Names.php */
1990 $wgExtraLanguageNames = array();
1993 * List of language codes that don't correspond to an actual language.
1994 * These codes are mostly leftoffs from renames, or other legacy things.
1995 * This array makes them not appear as a selectable language on the installer,
1996 * and excludes them when running the transstat.php script.
1998 $wgDummyLanguageCodes = array(
2001 'be-x-old' => 'be-tarask',
2005 'qqq' => 'qqq', # Used for message documentation.
2006 'qqx' => 'qqx', # Used for viewing message keys.
2009 'zh-classical' => 'lzh',
2010 'zh-min-nan' => 'nan',
2015 * Character set for use in the article edit box. Language-specific encodings
2018 * This historic feature is one of the first that was added by former MediaWiki
2019 * team leader Brion Vibber, and is used to support the Esperanto x-system.
2021 $wgEditEncoding = '';
2024 * Set this to true to replace Arabic presentation forms with their standard
2025 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
2028 * Note that pages with titles containing presentation forms will become
2029 * inaccessible, run maintenance/cleanupTitles.php to fix this.
2031 $wgFixArabicUnicode = true;
2034 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
2035 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
2036 * set to "ml". Note that some clients (even new clients as of 2010) do not
2037 * support these characters.
2039 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
2040 * fix any ZWJ sequences in existing page titles.
2042 $wgFixMalayalamUnicode = true;
2045 * Set this to always convert certain Unicode sequences to modern ones
2046 * regardless of the content language. This has a small performance
2049 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
2054 $wgAllUnicodeFixes = false;
2057 * Set this to eg 'ISO-8859-1' to perform character set conversion when
2058 * loading old revisions not marked with "utf-8" flag. Use this when
2059 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
2060 * burdensome mass conversion of old text data.
2062 * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
2063 * user names, etc still must be converted en masse in the database before
2064 * continuing as a UTF-8 wiki.
2066 $wgLegacyEncoding = false;
2069 * Browser Blacklist for unicode non compliant browsers. Contains a list of
2070 * regexps : "/regexp/" matching problematic browsers. These browsers will
2071 * be served encoded unicode in the edit box instead of real unicode.
2073 $wgBrowserBlackList = array(
2075 * Netscape 2-4 detection
2076 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2077 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2078 * with a negative assertion. The [UIN] identifier specifies the level of security
2079 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2080 * The language string is unreliable, it is missing on NS4 Mac.
2082 * Reference: http://www.psychedelix.com/agents/index.shtml
2084 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2085 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2086 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2089 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2092 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2093 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2094 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2097 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2098 * @link http://en.wikipedia.org/wiki/Template%3AOS9
2100 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2103 * Google wireless transcoder, seems to eat a lot of chars alive
2104 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2106 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2110 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
2111 * create stub reference rows in the text table instead of copying
2112 * the full text of all current entries from 'cur' to 'text'.
2114 * This will speed up the conversion step for large sites, but
2115 * requires that the cur table be kept around for those revisions
2116 * to remain viewable.
2118 * maintenance/migrateCurStubs.php can be used to complete the
2119 * migration in the background once the wiki is back online.
2121 * This option affects the updaters *only*. Any present cur stub
2122 * revisions will be readable at runtime regardless of this setting.
2124 $wgLegacySchemaConversion = false;
2127 * Enable to allow rewriting dates in page text.
2128 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
2130 $wgUseDynamicDates = false;
2132 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
2133 * the interface is set to English.
2135 $wgAmericanDates = false;
2137 * For Hindi and Arabic use local numerals instead of Western style (0-9)
2138 * numerals in interface.
2140 $wgTranslateNumerals = true;
2143 * Translation using MediaWiki: namespace.
2144 * Interface messages will be loaded from the database.
2146 $wgUseDatabaseMessages = true;
2149 * Expiry time for the message cache key
2151 $wgMsgCacheExpiry = 86400;
2154 * Maximum entry size in the message cache, in bytes
2156 $wgMaxMsgCacheEntrySize = 10000;
2158 /** Whether to enable language variant conversion. */
2159 $wgDisableLangConversion = false;
2161 /** Whether to enable language variant conversion for links. */
2162 $wgDisableTitleConversion = false;
2164 /** Whether to enable cononical language links in meta data. */
2165 $wgCanonicalLanguageLinks = true;
2167 /** Default variant code, if false, the default will be the language code */
2168 $wgDefaultLanguageVariant = false;
2171 * Disabled variants array of language variant conversion. Example:
2173 * $wgDisabledVariants[] = 'zh-mo';
2174 * $wgDisabledVariants[] = 'zh-my';
2180 * $wgDisabledVariants = array('zh-mo', 'zh-my');
2183 $wgDisabledVariants = array();
2186 * Like $wgArticlePath, but on multi-variant wikis, this provides a
2187 * path format that describes which parts of the URL contain the
2188 * language variant. For Example:
2190 * $wgLanguageCode = 'sr';
2191 * $wgVariantArticlePath = '/$2/$1';
2192 * $wgArticlePath = '/wiki/$1';
2194 * A link to /wiki/ would be redirected to /sr/Главна_страна
2196 * It is important that $wgArticlePath not overlap with possible values
2197 * of $wgVariantArticlePath.
2199 $wgVariantArticlePath = false;
2202 * Show a bar of language selection links in the user login and user
2203 * registration forms; edit the "loginlanguagelinks" message to
2206 $wgLoginLanguageSelector = false;
2209 * When translating messages with wfMsg(), it is not always clear what should
2210 * be considered UI messages and what should be content messages.
2212 * For example, for the English Wikipedia, there should be only one 'mainpage',
2213 * so when getting the link for 'mainpage', we should treat it as site content
2214 * and call wfMsgForContent(), but for rendering the text of the link, we call
2215 * wfMsg(). The code behaves this way by default. However, sites like the
2216 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2217 * different languages. This array provides a way to override the default
2218 * behavior. For example, to allow language-specific main page and community
2221 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2223 $wgForceUIMsgAsContentMsg = array();
2226 * Fake out the timezone that the server thinks it's in. This will be used for
2227 * date display and not for what's stored in the DB. Leave to null to retain
2228 * your server's OS-based timezone value.
2230 * This variable is currently used only for signature formatting and for local
2231 * time/date parser variables ({{LOCALTIME}} etc.)
2233 * Timezones can be translated by editing MediaWiki messages of type
2234 * timezone-nameinlowercase like timezone-utc.
2238 * $wgLocaltimezone = 'GMT';
2239 * $wgLocaltimezone = 'PST8PDT';
2240 * $wgLocaltimezone = 'Europe/Sweden';
2241 * $wgLocaltimezone = 'CET';
2244 $wgLocaltimezone = null;
2247 * Set an offset from UTC in minutes to use for the default timezone setting
2248 * for anonymous users and new user accounts.
2250 * This setting is used for most date/time displays in the software, and is
2251 * overrideable in user preferences. It is *not* used for signature timestamps.
2253 * By default, this will be set to match $wgLocaltimezone.
2255 $wgLocalTZoffset = null;
2258 * If set to true, this will roll back a few bug fixes introduced in 1.19,
2259 * emulating the 1.18 behaviour, to avoid introducing bug 34832. In 1.19,
2260 * language variant conversion is disabled in interface messages. Setting this
2261 * to true re-enables it.
2263 * This variable should be removed (implicitly false) in 1.20 or earlier.
2265 $wgBug34832TransitionalRollback = true;
2268 /** @} */ # End of language/charset settings
2270 /*************************************************************************//**
2271 * @name Output format and skin settings
2275 /** The default Content-Type header. */
2276 $wgMimeType = 'text/html';
2279 * The content type used in script tags. This is mostly going to be ignored if
2280 * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
2281 * require a MIME type for JavaScript or CSS (those are the default script and
2284 $wgJsMimeType = 'text/javascript';
2287 * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
2288 * doesn't actually have a doctype part to put this variable's contents in.
2290 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2293 * The URL of the document type declaration. Ignored if $wgHtml5 is true,
2294 * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
2295 * to put this variable's contents in.
2297 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2300 * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
2301 * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
2302 * as text/html) the attribute has no effect, so why bother?
2304 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2307 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2308 * instead, and disable HTML5 features. This may eventually be removed and set
2309 * to always true. If it's true, a number of other settings will be irrelevant
2310 * and have no effect.
2315 * Defines the value of the version attribute in the <html> tag, if any.
2316 * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
2317 * $wgHtml5 are both true, and this evaluates to boolean false (like if it's
2318 * left at the default null value), it will be auto-initialized to the correct
2319 * value for RDFa+HTML5. As such, you should have no reason to ever actually
2320 * set this to anything.
2322 $wgHtml5Version = null;
2325 * Enabled RDFa attributes for use in wikitext.
2326 * NOTE: Interaction with HTML5 is somewhat underspecified.
2328 $wgAllowRdfaAttributes = false;
2331 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2333 $wgAllowMicrodataAttributes = false;
2336 * Cleanup as much presentational html like valign -> css vertical-align as we can
2338 $wgCleanupPresentationalAttributes = true;
2341 * Should we try to make our HTML output well-formed XML? If set to false,
2342 * output will be a few bytes shorter, and the HTML will arguably be more
2343 * readable. If set to true, life will be much easier for the authors of
2344 * screen-scraping bots, and the HTML will arguably be more readable.
2346 * Setting this to false may omit quotation marks on some attributes, omit
2347 * slashes from some self-closing tags, omit some ending tags, etc., where
2348 * permitted by HTML5. Setting it to true will not guarantee that all pages
2349 * will be well-formed, although non-well-formed pages should be rare and it's
2350 * a bug if you find one. Conversely, setting it to false doesn't mean that
2351 * all XML-y constructs will be omitted, just that they might be.
2353 * Because of compatibility with screen-scraping bots, and because it's
2354 * controversial, this is currently left to true by default.
2356 $wgWellFormedXml = true;
2359 * Permit other namespaces in addition to the w3.org default.
2360 * Use the prefix for the key and the namespace for the value. For
2362 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2363 * Normally we wouldn't have to define this in the root "<html>"
2364 * element, but IE needs it there in some circumstances.
2366 * This is ignored if $wgHtml5 is true, for the same reason as
2367 * $wgXhtmlDefaultNamespace.
2369 $wgXhtmlNamespaces = array();
2372 * Show IP address, for non-logged in users. It's necessary to switch this off
2373 * for some forms of caching.
2374 * Will disable file cache.
2376 $wgShowIPinHeader = true;
2379 * Site notice shown at the top of each page
2381 * MediaWiki:Sitenotice page, which will override this. You can also
2382 * provide a separate message for logged-out users using the
2383 * MediaWiki:Anonnotice page.
2388 * A subtitle to add to the tagline, for skins that have it/
2390 $wgExtraSubtitle = '';
2393 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2395 $wgSiteSupportPage = '';
2398 * Validate the overall output using tidy and refuse
2399 * to display the page if it's not valid.
2401 $wgValidateAllHtml = false;
2404 * Default skin, for new users and anonymous visitors. Registered users may
2405 * change this to any one of the other available skins in their preferences.
2406 * This has to be completely lowercase; see the "skins" directory for the list
2407 * of available skins.
2409 $wgDefaultSkin = 'vector';
2412 * Specify the name of a skin that should not be presented in the list of
2413 * available skins. Use for blacklisting a skin which you do not want to
2414 * remove from the .../skins/ directory
2417 /** Array for more like $wgSkipSkin. */
2418 $wgSkipSkins = array();
2421 * Optionally, we can specify a stylesheet to use for media="handheld".
2422 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2423 * If left empty, compliant handheld browsers won't pick up the skin
2424 * stylesheet, which is specified for 'screen' media.
2426 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2427 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2429 * Will also be switched in when 'handheld=yes' is added to the URL, like
2430 * the 'printable=yes' mode for print media.
2432 $wgHandheldStyle = false;
2435 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2436 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2437 * which doesn't recognize 'handheld' but does support media queries on its
2440 * Consider only using this if you have a *really good* handheld stylesheet,
2441 * as iPhone users won't have any way to disable it and use the "grown-up"
2444 $wgHandheldForIPhone = false;
2447 * Allow user Javascript page?
2448 * This enables a lot of neat customizations, but may
2449 * increase security risk to users and server load.
2451 $wgAllowUserJs = false;
2454 * Allow user Cascading Style Sheets (CSS)?
2455 * This enables a lot of neat customizations, but may
2456 * increase security risk to users and server load.
2458 $wgAllowUserCss = false;
2461 * Allow user-preferences implemented in CSS?
2462 * This allows users to customise the site appearance to a greater
2463 * degree; disabling it will improve page load times.
2465 $wgAllowUserCssPrefs = true;
2467 /** Use the site's Javascript page? */
2468 $wgUseSiteJs = true;
2470 /** Use the site's Cascading Style Sheets (CSS)? */
2471 $wgUseSiteCss = true;
2474 * Break out of framesets. This can be used to prevent clickjacking attacks,
2475 * or to prevent external sites from framing your site with ads.
2477 $wgBreakFrames = false;
2480 * The X-Frame-Options header to send on pages sensitive to clickjacking
2481 * attacks, such as edit pages. This prevents those pages from being displayed
2482 * in a frame or iframe. The options are:
2484 * - 'DENY': Do not allow framing. This is recommended for most wikis.
2486 * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
2487 * to allow framing within a trusted domain. This is insecure if there
2488 * is a page on the same domain which allows framing of arbitrary URLs.
2490 * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
2491 * full compromise of local user accounts. Private wikis behind a
2492 * corporate firewall are especially vulnerable. This is not
2495 * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
2496 * not just edit pages.
2498 $wgEditPageFrameOptions = 'DENY';
2501 * Disable output compression (enabled by default if zlib is available)
2503 $wgDisableOutputCompression = false;
2506 * Should we allow a broader set of characters in id attributes, per HTML5? If
2507 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2508 * functionality is ready, it will be on by default with no option.
2510 * Currently this appears to work fine in all browsers, but it's disabled by
2511 * default because it normalizes id's a bit too aggressively, breaking preexisting
2512 * content (particularly Cite). See bug 27733, bug 27694, bug 27474.
2514 $wgExperimentalHtmlIds = false;
2517 * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
2518 * You can add new icons to the built in copyright or poweredby, or you can create
2519 * a new block. Though note that you may need to add some custom css to get good styling
2520 * of new blocks in monobook. vector and modern should work without any special css.
2522 * $wgFooterIcons itself is a key/value array.
2523 * The key is the name of a block that the icons will be wrapped in. The final id varies
2524 * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
2525 * turns it into mw_poweredby.
2526 * The value is either key/value array of icons or a string.
2527 * In the key/value array the key may or may not be used by the skin but it can
2528 * be used to find the icon and unset it or change the icon if needed.
2529 * This is useful for disabling icons that are set by extensions.
2530 * The value should be either a string or an array. If it is a string it will be output
2531 * directly as html, however some skins may choose to ignore it. An array is the preferred format
2532 * for the icon, the following keys are used:
2533 * src: An absolute url to the image to use for the icon, this is recommended
2534 * but not required, however some skins will ignore icons without an image
2535 * url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted
2536 * alt: This is the text form of the icon, it will be displayed without an image in
2537 * skins like Modern or if src is not set, and will otherwise be used as
2538 * the alt="" for the image. This key is required.
2539 * width and height: If the icon specified by src is not of the standard size
2540 * you can specify the size of image to use with these keys.
2541 * Otherwise they will default to the standard 88x31.
2543 $wgFooterIcons = array(
2544 "copyright" => array(
2545 "copyright" => array(), // placeholder for the built in copyright icon
2547 "poweredby" => array(
2548 "mediawiki" => array(
2549 "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
2550 "url" => "//www.mediawiki.org/",
2551 "alt" => "Powered by MediaWiki",
2557 * Login / create account link behavior when it's possible for anonymous users to create an account
2558 * true = use a combined login / create account link
2559 * false = split login and create account into two separate links
2561 $wgUseCombinedLoginLink = true;
2564 * Search form behavior for Vector skin only
2565 * true = use an icon search button
2566 * false = use Go & Search buttons
2568 $wgVectorUseSimpleSearch = false;
2571 * Watch and unwatch as an icon rather than a link for Vector skin only
2572 * true = use an icon watch/unwatch button
2573 * false = use watch/unwatch text link
2575 $wgVectorUseIconWatch = false;
2578 * Display user edit counts in various prominent places.
2580 $wgEdititis = false;
2583 * Better directionality support (bug 6100 and related).
2584 * Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
2586 * @deprecated since 1.18
2588 $wgBetterDirectionality = true;
2591 * Some web hosts attempt to rewrite all responses with a 404 (not found)
2592 * status code, mangling or hiding MediaWiki's output. If you are using such a
2593 * host, you should start looking for a better one. While you're doing that,
2594 * set this to false to convert some of MediaWiki's 404 responses to 200 so
2595 * that the generated error pages can be seen.
2597 * In cases where for technical reasons it is more important for MediaWiki to
2598 * send the correct status code than for the body to be transmitted intact,
2599 * this configuration variable is ignored.
2601 $wgSend404Code = true;
2603 /** @} */ # End of output format settings }
2605 /*************************************************************************//**
2606 * @name Resource loader settings
2611 * Client-side resource modules. Extensions should add their module definitions
2615 * $wgResourceModules['ext.myExtension'] = array(
2616 * 'scripts' => 'myExtension.js',
2617 * 'styles' => 'myExtension.css',
2618 * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
2619 * 'localBasePath' => dirname( __FILE__ ),
2620 * 'remoteExtPath' => 'MyExtension',
2623 $wgResourceModules = array();
2626 * Extensions should register foreign module sources here. 'local' is a
2627 * built-in source that is not in this array, but defined by
2628 * ResourceLoader::__construct() so that it cannot be unset.
2631 * $wgResourceLoaderSources['foo'] = array(
2632 * 'loadScript' => 'http://example.org/w/load.php',
2633 * 'apiScript' => 'http://example.org/w/api.php'
2636 $wgResourceLoaderSources = array();
2639 * Default 'remoteBasePath' value for instances of ResourceLoaderFileModule.
2640 * If not set, then $wgScriptPath will be used as a fallback.
2642 $wgResourceBasePath = null;
2645 * Maximum time in seconds to cache resources served by the resource loader
2647 $wgResourceLoaderMaxage = array(
2648 'versioned' => array(
2649 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
2650 'server' => 30 * 24 * 60 * 60, // 30 days
2651 // On the client side (e.g. in the browser cache).
2652 'client' => 30 * 24 * 60 * 60, // 30 days
2654 'unversioned' => array(
2655 'server' => 5 * 60, // 5 minutes
2656 'client' => 5 * 60, // 5 minutes
2661 * The default debug mode (on/off) for of ResourceLoader requests. This will still
2662 * be overridden when the debug URL parameter is used.
2664 $wgResourceLoaderDebug = false;
2667 * Enable embedding of certain resources using Edge Side Includes. This will
2668 * improve performance but only works if there is something in front of the
2669 * web server (e..g a Squid or Varnish server) configured to process the ESI.
2671 $wgResourceLoaderUseESI = false;
2674 * Put each statement on its own line when minifying JavaScript. This makes
2675 * debugging in non-debug mode a bit easier.
2677 $wgResourceLoaderMinifierStatementsOnOwnLine = false;
2680 * Maximum line length when minifying JavaScript. This is not a hard maximum:
2681 * the minifier will try not to produce lines longer than this, but may be
2682 * forced to do so in certain cases.
2684 $wgResourceLoaderMinifierMaxLineLength = 1000;
2687 * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
2690 $wgIncludeLegacyJavaScript = true;
2693 * Whether to preload the mediawiki.util module as blocking module in the top queue.
2694 * Before MediaWiki 1.19, modules used to load slower/less asynchronous which allowed
2695 * modules to lack dependencies on 'popular' modules that were likely loaded already.
2696 * This setting is to aid scripts during migration by providing mediawiki.util
2697 * unconditionally (which was the most commonly missed dependency).
2698 * It doesn't cover all missing dependencies obviously but should fix most of them.
2699 * This should be removed at some point after site/user scripts have been fixed.
2700 * Enable this if your wiki has a large amount of user/site scripts that are lacking
2703 $wgPreloadJavaScriptMwUtil = false;
2706 * Whether or not to assing configuration variables to the global window object.
2707 * If this is set to false, old code using deprecated variables like:
2708 * " if ( window.wgRestrictionEdit ) ..."
2710 * " if ( wgIsArticle ) ..."
2711 * will no longer work and needs to use mw.config instead. For example:
2712 * " if ( mw.config.exists('wgRestrictionEdit') )"
2714 * " if ( mw.config.get('wgIsArticle') )".
2716 $wgLegacyJavaScriptGlobals = true;
2719 * If set to a positive number, ResourceLoader will not generate URLs whose
2720 * query string is more than this many characters long, and will instead use
2721 * multiple requests with shorter query strings. This degrades performance,
2722 * but may be needed if your web server has a low (less than, say 1024)
2723 * query string length limit or a low value for suhosin.get.max_value_length
2724 * that you can't increase.
2726 * If set to a negative number, ResourceLoader will assume there is no query
2727 * string length limit.
2729 $wgResourceLoaderMaxQueryLength = -1;
2732 * If set to true, JavaScript modules loaded from wiki pages will be parsed prior
2733 * to minification to validate it.
2735 * Parse errors will result in a JS exception being thrown during module load,
2736 * which avoids breaking other modules loaded in the same request.
2738 $wgResourceLoaderValidateJS = true;
2741 * If set to true, statically-sourced (file-backed) JavaScript resources will
2742 * be parsed for validity before being bundled up into ResourceLoader modules.
2744 * This can be helpful for development by providing better error messages in
2745 * default (non-debug) mode, but JavaScript parsing is slow and memory hungry
2746 * and may fail on large pre-bundled frameworks.
2748 $wgResourceLoaderValidateStaticJS = false;
2751 * If set to true, asynchronous loading of bottom-queue scripts in the "<head>"
2752 * will be enabled. This is an experimental feature that's supposed to make
2753 * JavaScript load faster.
2755 $wgResourceLoaderExperimentalAsyncLoading = false;
2757 /** @} */ # End of resource loader settings }
2760 /*************************************************************************//**
2761 * @name Page title and interwiki link settings
2766 * Name of the project namespace. If left set to false, $wgSitename will be
2769 $wgMetaNamespace = false;
2772 * Name of the project talk namespace.
2774 * Normally you can ignore this and it will be something like
2775 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
2776 * manually for grammatical reasons.
2778 $wgMetaNamespaceTalk = false;
2781 * Additional namespaces. If the namespaces defined in Language.php and
2782 * Namespace.php are insufficient, you can create new ones here, for example,
2783 * to import Help files in other languages. You can also override the namespace
2784 * names of existing namespaces. Extensions developers should use
2785 * $wgCanonicalNamespaceNames.
2787 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2788 * no longer be accessible. If you rename it, then you can access them through
2789 * the new namespace name.
2791 * Custom namespaces should start at 100 to avoid conflicting with standard
2792 * namespaces, and should always follow the even/odd main/talk pattern.
2794 # $wgExtraNamespaces = array(
2796 # 101 => "Hilfe_Diskussion",
2798 # 103 => "Discussion_Aide"
2800 $wgExtraNamespaces = array();
2803 * Same as above, but for namespaces with gender distinction.
2804 * Note: the default form for the namespace should also be set
2805 * using $wgExtraNamespaces for the same index.
2808 $wgExtraGenderNamespaces = array();
2812 * These are alternate names for the primary localised namespace names, which
2813 * are defined by $wgExtraNamespaces and the language file. If a page is
2814 * requested with such a prefix, the request will be redirected to the primary
2817 * Set this to a map from namespace names to IDs.
2819 * $wgNamespaceAliases = array(
2820 * 'Wikipedian' => NS_USER,
2824 $wgNamespaceAliases = array();
2827 * Allowed title characters -- regex character class
2828 * Don't change this unless you know what you're doing
2830 * Problematic punctuation:
2831 * - []{}|# Are needed for link syntax, never enable these
2832 * - <> Causes problems with HTML escaping, don't use
2833 * - % Enabled by default, minor problems with path to query rewrite rules, see below
2834 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
2835 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
2837 * All three of these punctuation problems can be avoided by using an alias, instead of a
2838 * rewrite rule of either variety.
2840 * The problem with % is that when using a path to query rewrite rule, URLs are
2841 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
2842 * %253F, for example, becomes "?". Our code does not double-escape to compensate
2843 * for this, indeed double escaping would break if the double-escaped title was
2844 * passed in the query string rather than the path. This is a minor security issue
2845 * because articles can be created such that they are hard to view or edit.
2847 * In some rare cases you may wish to remove + for compatibility with old links.
2849 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
2850 * this breaks interlanguage links
2852 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
2855 * The interwiki prefix of the current wiki, or false if it doesn't have one.
2857 $wgLocalInterwiki = false;
2860 * Expiry time for cache of interwiki table
2862 $wgInterwikiExpiry = 10800;
2864 /** Interwiki caching settings.
2865 $wgInterwikiCache specifies path to constant database file
2866 This cdb database is generated by dumpInterwiki from maintenance
2867 and has such key formats:
2868 dbname:key - a simple key (e.g. enwiki:meta)
2869 _sitename:key - site-scope key (e.g. wiktionary:meta)
2870 __global:key - global-scope key (e.g. __global:meta)
2871 __sites:dbname - site mapping (e.g. __sites:enwiki)
2872 Sites mapping just specifies site name, other keys provide
2873 "local url" data layout.
2874 $wgInterwikiScopes specify number of domains to check for messages:
2875 1 - Just wiki(db)-level
2876 2 - wiki and global levels
2878 $wgInterwikiFallbackSite - if unable to resolve from cache
2880 $wgInterwikiCache = false;
2881 $wgInterwikiScopes = 3;
2882 $wgInterwikiFallbackSite = 'wiki';
2885 * If local interwikis are set up which allow redirects,
2886 * set this regexp to restrict URLs which will be displayed
2887 * as 'redirected from' links.
2889 * It might look something like this:
2890 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
2892 * Leave at false to avoid displaying any incoming redirect markers.
2893 * This does not affect intra-wiki redirects, which don't change
2896 $wgRedirectSources = false;
2899 * Set this to false to avoid forcing the first letter of links to capitals.
2900 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2901 * appearing with a capital at the beginning of a sentence will *not* go to the
2902 * same place as links in the middle of a sentence using a lowercase initial.
2904 $wgCapitalLinks = true;
2907 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2908 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2909 * true by default (and setting them has no effect), due to various things that
2910 * require them to be so. Also, since Talk namespaces need to directly mirror their
2911 * associated content namespaces, the values for those are ignored in favor of the
2912 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2914 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2916 $wgCapitalLinkOverrides = array();
2918 /** Which namespaces should support subpages?
2919 * See Language.php for a list of namespaces.
2921 $wgNamespacesWithSubpages = array(
2924 NS_USER_TALK
=> true,
2925 NS_PROJECT_TALK
=> true,
2926 NS_FILE_TALK
=> true,
2927 NS_MEDIAWIKI
=> true,
2928 NS_MEDIAWIKI_TALK
=> true,
2929 NS_TEMPLATE_TALK
=> true,
2930 NS_HELP_TALK
=> true,
2931 NS_CATEGORY_TALK
=> true
2935 * Array of namespaces which can be deemed to contain valid "content", as far
2936 * as the site statistics are concerned. Useful if additional namespaces also
2937 * contain "content" which should be considered when generating a count of the
2938 * number of articles in the wiki.
2940 $wgContentNamespaces = array( NS_MAIN
);
2943 * Max number of redirects to follow when resolving redirects.
2944 * 1 means only the first redirect is followed (default behavior).
2945 * 0 or less means no redirects are followed.
2947 $wgMaxRedirects = 1;
2950 * Array of invalid page redirect targets.
2951 * Attempting to create a redirect to any of the pages in this array
2952 * will make the redirect fail.
2953 * Userlogout is hard-coded, so it does not need to be listed here.
2954 * (bug 10569) Disallow Mypage and Mytalk as well.
2956 * As of now, this only checks special pages. Redirects to pages in
2957 * other namespaces cannot be invalidated by this variable.
2959 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
2961 /** @} */ # End of title and interwiki settings }
2963 /************************************************************************//**
2964 * @name Parser settings
2965 * These settings configure the transformation from wikitext to HTML.
2970 * Parser configuration. Associative array with the following members:
2972 * class The class name
2974 * preprocessorClass The preprocessor class. Two classes are currently available:
2975 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
2976 * storage, and Preprocessor_DOM, which uses the DOM module for
2977 * temporary storage. Preprocessor_DOM generally uses less memory;
2978 * the speed of the two is roughly the same.
2980 * If this parameter is not given, it uses Preprocessor_DOM if the
2981 * DOM module is available, otherwise it uses Preprocessor_Hash.
2983 * The entire associative array will be passed through to the constructor as
2984 * the first parameter. Note that only Setup.php can use this variable --
2985 * the configuration will change at runtime via $wgParser member functions, so
2986 * the contents of this variable will be out-of-date. The variable can only be
2987 * changed during LocalSettings.php, in particular, it can't be changed during
2988 * an extension setup function.
2990 $wgParserConf = array(
2991 'class' => 'Parser',
2992 #'preprocessorClass' => 'Preprocessor_Hash',
2995 /** Maximum indent level of toc. */
2996 $wgMaxTocLevel = 999;
2999 * A complexity limit on template expansion
3001 $wgMaxPPNodeCount = 1000000;
3004 * Maximum recursion depth for templates within templates.
3005 * The current parser adds two levels to the PHP call stack for each template,
3006 * and xdebug limits the call stack to 100 by default. So this should hopefully
3007 * stop the parser before it hits the xdebug limit.
3009 $wgMaxTemplateDepth = 40;
3011 /** @see $wgMaxTemplateDepth */
3012 $wgMaxPPExpandDepth = 40;
3014 /** The external URL protocols */
3015 $wgUrlProtocols = array(
3020 'ircs://', // @bug 28503
3022 'telnet://', // Well if we're going to support the above.. -ævar
3023 'nntp://', // @bug 3808 RFC 1738
3030 '//', // for protocol-relative URLs
3034 * If true, removes (substitutes) templates in "~~~~" signatures.
3036 $wgCleanSignatures = true;
3038 /** Whether to allow inline image pointing to other websites */
3039 $wgAllowExternalImages = false;
3042 * If the above is false, you can specify an exception here. Image URLs
3043 * that start with this string are then rendered, while all others are not.
3044 * You can use this to set up a trusted, simple repository of images.
3045 * You may also specify an array of strings to allow multiple sites
3049 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
3050 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
3053 $wgAllowExternalImagesFrom = '';
3055 /** If $wgAllowExternalImages is false, you can allow an on-wiki
3056 * whitelist of regular expression fragments to match the image URL
3057 * against. If the image matches one of the regular expression fragments,
3058 * The image will be displayed.
3060 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
3061 * Or false to disable it
3063 $wgEnableImageWhitelist = true;
3066 * A different approach to the above: simply allow the "<img>" tag to be used.
3067 * This allows you to specify alt text and other attributes, copy-paste HTML to
3068 * your wiki more easily, etc. However, allowing external images in any manner
3069 * will allow anyone with editing rights to snoop on your visitors' IP
3070 * addresses and so forth, if they wanted to, by inserting links to images on
3071 * sites they control.
3073 $wgAllowImageTag = false;
3076 * $wgUseTidy: use tidy to make sure HTML output is sane.
3077 * Tidy is a free tool that fixes broken HTML.
3078 * See http://www.w3.org/People/Raggett/tidy/
3080 * - $wgTidyBin should be set to the path of the binary and
3081 * - $wgTidyConf to the path of the configuration file.
3082 * - $wgTidyOpts can include any number of parameters.
3083 * - $wgTidyInternal controls the use of the PECL extension or the
3084 * libtidy (PHP >= 5) extension to use an in-process tidy library instead
3085 * of spawning a separate program.
3086 * Normally you shouldn't need to override the setting except for
3087 * debugging. To install, use 'pear install tidy' and add a line
3088 * 'extension=tidy.so' to php.ini.
3091 /** @see $wgUseTidy */
3092 $wgAlwaysUseTidy = false;
3093 /** @see $wgUseTidy */
3094 $wgTidyBin = 'tidy';
3095 /** @see $wgUseTidy */
3096 $wgTidyConf = $IP.'/includes/tidy.conf';
3097 /** @see $wgUseTidy */
3099 /** @see $wgUseTidy */
3100 $wgTidyInternal = extension_loaded( 'tidy' );
3103 * Put tidy warnings in HTML comments
3104 * Only works for internal tidy.
3106 $wgDebugTidy = false;
3108 /** Allow raw, unchecked HTML in "<html>...</html>" sections.
3109 * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
3110 * TO RESTRICT EDITING to only those that you trust
3115 * Set a default target for external links, e.g. _blank to pop up a new window
3117 $wgExternalLinkTarget = false;
3120 * If true, external URL links in wiki text will be given the
3121 * rel="nofollow" attribute as a hint to search engines that
3122 * they should not be followed for ranking purposes as they
3123 * are user-supplied and thus subject to spamming.
3125 $wgNoFollowLinks = true;
3128 * Namespaces in which $wgNoFollowLinks doesn't apply.
3129 * See Language.php for a list of namespaces.
3131 $wgNoFollowNsExceptions = array();
3134 * If this is set to an array of domains, external links to these domain names
3135 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3136 * value of $wgNoFollowLinks. For instance:
3138 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3140 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3141 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3144 $wgNoFollowDomainExceptions = array();
3147 * Allow DISPLAYTITLE to change title display
3149 $wgAllowDisplayTitle = true;
3152 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
3155 $wgRestrictDisplayTitle = true;
3158 * Maximum number of calls per parse to expensive parser functions such as
3161 $wgExpensiveParserFunctionLimit = 100;
3164 * Preprocessor caching threshold
3165 * Setting it to 'false' will disable the preprocessor cache.
3167 $wgPreprocessorCacheThreshold = 1000;
3170 * Enable interwiki transcluding. Only when iw_trans=1.
3172 $wgEnableScaryTranscluding = false;
3175 * (see next option $wgGlobalDatabase).
3177 $wgTranscludeCacheExpiry = 3600;
3179 /** @} */ # end of parser settings }
3181 /************************************************************************//**
3187 * Method used to determine if a page in a content namespace should be counted
3188 * as a valid article.
3190 * Redirect pages will never be counted as valid articles.
3192 * This variable can have the following values:
3193 * - 'any': all pages as considered as valid articles
3194 * - 'comma': the page must contain a comma to be considered valid
3195 * - 'link': the page must contain a [[wiki link]] to be considered valid
3196 * - null: the value will be set at run time depending on $wgUseCommaCount:
3197 * if $wgUseCommaCount is false, it will be 'link', if it is true
3198 * it will be 'comma'
3200 * See also See http://www.mediawiki.org/wiki/Manual:Article_count
3202 * Retroactively changing this variable will not affect the existing count,
3203 * to update it, you will need to run the maintenance/updateArticleCount.php
3206 $wgArticleCountMethod = null;
3209 * Backward compatibility setting, will set $wgArticleCountMethod if it is null.
3210 * @deprecated since 1.18; use $wgArticleCountMethod instead
3212 $wgUseCommaCount = false;
3215 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
3216 * values are easier on the database. A value of 1 causes the counters to be
3217 * updated on every hit, any higher value n cause them to update *on average*
3218 * every n hits. Should be set to either 1 or something largish, eg 1000, for
3219 * maximum efficiency.
3221 $wgHitcounterUpdateFreq = 1;
3224 * How many days user must be idle before he is considered inactive. Will affect
3225 * the number shown on Special:Statistics and Special:ActiveUsers special page.
3226 * You might want to leave this as the default value, to provide comparable
3227 * numbers between different wikis.
3229 $wgActiveUserDays = 30;
3231 /** @} */ # End of statistics }
3233 /************************************************************************//**
3234 * @name User accounts, authentication
3238 /** For compatibility with old installations set to false */
3239 $wgPasswordSalt = true;
3242 * Specifies the minimal length of a user password. If set to 0, empty pass-
3243 * words are allowed.
3245 $wgMinimalPasswordLength = 1;
3248 * Whether to allow password resets ("enter some identifying data, and we'll send an email
3249 * with a temporary password you can use to get back into the account") identified by
3250 * various bits of data. Setting all of these to false (or the whole variable to false)
3251 * has the effect of disabling password resets entirely
3253 $wgPasswordResetRoutes = array(
3259 * Maximum number of Unicode characters in signature
3261 $wgMaxSigChars = 255;
3264 * Maximum number of bytes in username. You want to run the maintenance
3265 * script ./maintenance/checkUsernames.php once you have changed this value.
3267 $wgMaxNameChars = 255;
3270 * Array of usernames which may not be registered or logged in from
3271 * Maintenance scripts can still use these
3273 $wgReservedUsernames = array(
3274 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3275 'Conversion script', // Used for the old Wikipedia software upgrade
3276 'Maintenance script', // Maintenance scripts which perform editing, image import script
3277 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3278 'ScriptImporter', // Default user name used by maintenance/importSiteScripts.php
3279 'msg:double-redirect-fixer', // Automatic double redirect fix
3280 'msg:usermessage-editor', // Default user for leaving user messages
3281 'msg:proxyblocker', // For Special:Blockme
3285 * Settings added to this array will override the default globals for the user
3286 * preferences used by anonymous visitors and newly created accounts.
3287 * For instance, to disable section editing links:
3288 * $wgDefaultUserOptions ['editsection'] = 0;
3291 $wgDefaultUserOptions = array(
3292 'ccmeonemails' => 0,
3294 'date' => 'default',
3297 'disablesuggest' => 0,
3298 'editfont' => 'default',
3299 'editondblclick' => 0,
3301 'editsectiononrightclick' => 0,
3302 'enotifminoredits' => 0,
3303 'enotifrevealaddr' => 0,
3304 'enotifusertalkpages' => 1,
3305 'enotifwatchlistpages' => 0,
3306 'extendwatchlist' => 0,
3307 'externaldiff' => 0,
3308 'externaleditor' => 0,
3310 'forceeditsummary' => 0,
3311 'gender' => 'unknown',
3313 'hidepatrolled' => 0,
3317 'minordefault' => 0,
3318 'newpageshidepatrolled' => 0,
3320 'noconvertlink' => 0,
3321 'norollbackdiff' => 0,
3322 'numberheadings' => 0,
3323 'previewonfirst' => 0,
3324 'previewontop' => 1,
3328 'rememberpassword' => 0,
3330 'searchlimit' => 20,
3331 'showhiddencats' => 0,
3332 'showjumplinks' => 1,
3333 'shownumberswatching' => 1,
3337 'stubthreshold' => 0,
3340 'uselivepreview' => 0,
3342 'watchcreations' => 0,
3343 'watchdefault' => 0,
3344 'watchdeletion' => 0,
3345 'watchlistdays' => 3.0,
3346 'watchlisthideanons' => 0,
3347 'watchlisthidebots' => 0,
3348 'watchlisthideliu' => 0,
3349 'watchlisthideminor' => 0,
3350 'watchlisthideown' => 0,
3351 'watchlisthidepatrolled' => 0,
3357 * Whether or not to allow and use real name fields.
3358 * @deprecated since 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
3361 $wgAllowRealName = true;
3363 /** An array of preferences to not show for the user */
3364 $wgHiddenPrefs = array();
3367 * Characters to prevent during new account creations.
3368 * This is used in a regular expression character class during
3369 * registration (regex metacharacters like / are escaped).
3371 $wgInvalidUsernameCharacters = '@';
3374 * Character used as a delimiter when testing for interwiki userrights
3375 * (In Special:UserRights, it is possible to modify users on different
3376 * databases if the delimiter is used, e.g. "Someuser@enwiki").
3378 * It is recommended that you have this delimiter in
3379 * $wgInvalidUsernameCharacters above, or you will not be able to
3380 * modify the user rights of those users via Special:UserRights
3382 $wgUserrightsInterwikiDelimiter = '@';
3385 * Use some particular type of external authentication. The specific
3386 * authentication module you use will normally require some extra settings to
3389 * null indicates no external authentication is to be used. Otherwise,
3390 * $wgExternalAuthType must be the name of a non-abstract class that extends
3393 * Core authentication modules can be found in includes/extauth/.
3395 $wgExternalAuthType = null;
3398 * Configuration for the external authentication. This may include arbitrary
3399 * keys that depend on the authentication mechanism. For instance,
3400 * authentication against another web app might require that the database login
3401 * info be provided. Check the file where your auth mechanism is defined for
3402 * info on what to put here.
3404 $wgExternalAuthConf = array();
3407 * When should we automatically create local accounts when external accounts
3408 * already exist, if using ExternalAuth? Can have three values: 'never',
3409 * 'login', 'view'. 'view' requires the external database to support cookies,
3410 * and implies 'login'.
3412 * TODO: Implement 'view' (currently behaves like 'login').
3414 $wgAutocreatePolicy = 'login';
3417 * Policies for how each preference is allowed to be changed, in the presence
3418 * of external authentication. The keys are preference keys, e.g., 'password'
3419 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
3422 * - local: Allow changes to this pref through the wiki interface but only
3423 * apply them locally (default).
3424 * - semiglobal: Allow changes through the wiki interface and try to apply them
3425 * to the foreign database, but continue on anyway if that fails.
3426 * - global: Allow changes through the wiki interface, but only let them go
3427 * through if they successfully update the foreign database.
3428 * - message: Allow no local changes for linked accounts; replace the change
3429 * form with a message provided by the auth plugin, telling the user how to
3430 * change the setting externally (maybe providing a link, etc.). If the auth
3431 * plugin provides no message for this preference, hide it entirely.
3433 * Accounts that are not linked to an external account are never affected by
3434 * this setting. You may want to look at $wgHiddenPrefs instead.
3435 * $wgHiddenPrefs supersedes this option.
3437 * TODO: Implement message, global.
3439 $wgAllowPrefChange = array();
3442 * This is to let user authenticate using https when they come from http.
3443 * Based on an idea by George Herbert on wikitech-l:
3444 * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
3447 $wgSecureLogin = false;
3449 /** @} */ # end user accounts }
3451 /************************************************************************//**
3452 * @name User rights, access control and monitoring
3457 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
3459 $wgAutoblockExpiry = 86400;
3462 * Set this to true to allow blocked users to edit their own user talk page.
3464 $wgBlockAllowsUTEdit = false;
3466 /** Allow sysops to ban users from accessing Emailuser */
3467 $wgSysopEmailBans = true;
3470 * Limits on the possible sizes of range blocks.
3472 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
3473 * /1 is a small range and a /31 is a large range. For IPv4, setting a limit of
3474 * half the number of bits avoids such errors, and allows entire ISPs to be
3475 * blocked using a small number of range blocks.
3477 * For IPv6, RFC 3177 recommends that a /48 be allocated to every residential
3478 * customer, so range blocks larger than /64 (half the number of bits) will
3479 * plainly be required. RFC 4692 implies that a very large ISP may be
3480 * allocated a /19 if a generous HD-Ratio of 0.8 is used, so we will use that
3481 * as our limit. As of 2012, blocking the whole world would require a /4 range.
3483 $wgBlockCIDRLimit = array(
3484 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
3489 * If true, blocked users will not be allowed to login. When using this with
3490 * a public wiki, the effect of logging out blocked users may actually be
3491 * avers: unless the user's address is also blocked (e.g. auto-block),
3492 * logging the user out will again allow reading and editing, just as for
3493 * anonymous visitors.
3495 $wgBlockDisablesLogin = false;
3498 * Pages anonymous user may see as an array, e.g.
3501 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
3504 * Special:Userlogin and Special:ChangePassword are always whitelisted.
3506 * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
3507 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3509 * Also note that this will only protect _pages in the wiki_. Uploaded files
3510 * will remain readable. You can use img_auth.php to protect uploaded files,
3511 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3513 $wgWhitelistRead = false;
3516 * Should editors be required to have a validated e-mail
3517 * address before being allowed to edit?
3519 $wgEmailConfirmToEdit = false;
3522 * Permission keys given to users in each group.
3523 * This is an array where the keys are all groups and each value is an
3524 * array of the format (right => boolean).
3526 * The second format is used to support per-namespace permissions.
3527 * Note that this feature does not fully work for all permission types.
3529 * All users are implicitly in the '*' group including anonymous visitors;
3530 * logged-in users are all implicitly in the 'user' group. These will be
3531 * combined with the permissions of all groups that a given user is listed
3532 * in in the user_groups table.
3534 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3535 * doing! This will wipe all permissions, and may mean that your users are
3536 * unable to perform certain essential tasks or access new functionality
3537 * when new permissions are introduced and default grants established.
3539 * Functionality to make pages inaccessible has not been extensively tested
3540 * for security. Use at your own risk!
3542 * This replaces $wgWhitelistAccount and $wgWhitelistEdit
3544 $wgGroupPermissions = array();
3546 /** @cond file_level_code */
3547 // Implicit group for all visitors
3548 $wgGroupPermissions['*']['createaccount'] = true;
3549 $wgGroupPermissions['*']['read'] = true;
3550 $wgGroupPermissions['*']['edit'] = true;
3551 $wgGroupPermissions['*']['createpage'] = true;
3552 $wgGroupPermissions['*']['createtalk'] = true;
3553 $wgGroupPermissions['*']['writeapi'] = true;
3554 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3556 // Implicit group for all logged-in accounts
3557 $wgGroupPermissions['user']['move'] = true;
3558 $wgGroupPermissions['user']['move-subpages'] = true;
3559 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3560 $wgGroupPermissions['user']['movefile'] = true;
3561 $wgGroupPermissions['user']['read'] = true;
3562 $wgGroupPermissions['user']['edit'] = true;
3563 $wgGroupPermissions['user']['createpage'] = true;
3564 $wgGroupPermissions['user']['createtalk'] = true;
3565 $wgGroupPermissions['user']['writeapi'] = true;
3566 $wgGroupPermissions['user']['upload'] = true;
3567 $wgGroupPermissions['user']['reupload'] = true;
3568 $wgGroupPermissions['user']['reupload-shared'] = true;
3569 $wgGroupPermissions['user']['minoredit'] = true;
3570 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3571 $wgGroupPermissions['user']['sendemail'] = true;
3573 // Implicit group for accounts that pass $wgAutoConfirmAge
3574 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3576 // Users with bot privilege can have their edits hidden
3577 // from various log pages by default
3578 $wgGroupPermissions['bot']['bot'] = true;
3579 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3580 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3581 $wgGroupPermissions['bot']['autopatrol'] = true;
3582 $wgGroupPermissions['bot']['suppressredirect'] = true;
3583 $wgGroupPermissions['bot']['apihighlimits'] = true;
3584 $wgGroupPermissions['bot']['writeapi'] = true;
3585 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3587 // Most extra permission abilities go to this group
3588 $wgGroupPermissions['sysop']['block'] = true;
3589 $wgGroupPermissions['sysop']['createaccount'] = true;
3590 $wgGroupPermissions['sysop']['delete'] = true;
3591 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3592 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3593 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3594 $wgGroupPermissions['sysop']['undelete'] = true;
3595 $wgGroupPermissions['sysop']['editinterface'] = true;
3596 $wgGroupPermissions['sysop']['editusercss'] = true;
3597 $wgGroupPermissions['sysop']['edituserjs'] = true;
3598 $wgGroupPermissions['sysop']['import'] = true;
3599 $wgGroupPermissions['sysop']['importupload'] = true;
3600 $wgGroupPermissions['sysop']['move'] = true;
3601 $wgGroupPermissions['sysop']['move-subpages'] = true;
3602 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3603 $wgGroupPermissions['sysop']['patrol'] = true;
3604 $wgGroupPermissions['sysop']['autopatrol'] = true;
3605 $wgGroupPermissions['sysop']['protect'] = true;
3606 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3607 $wgGroupPermissions['sysop']['rollback'] = true;
3608 $wgGroupPermissions['sysop']['upload'] = true;
3609 $wgGroupPermissions['sysop']['reupload'] = true;
3610 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3611 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3612 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3613 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3614 $wgGroupPermissions['sysop']['blockemail'] = true;
3615 $wgGroupPermissions['sysop']['markbotedits'] = true;
3616 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3617 $wgGroupPermissions['sysop']['browsearchive'] = true;
3618 $wgGroupPermissions['sysop']['noratelimit'] = true;
3619 $wgGroupPermissions['sysop']['movefile'] = true;
3620 $wgGroupPermissions['sysop']['unblockself'] = true;
3621 $wgGroupPermissions['sysop']['suppressredirect'] = true;
3622 #$wgGroupPermissions['sysop']['upload_by_url'] = true;
3623 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3625 // Permission to change users' group assignments
3626 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3627 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3628 // Permission to change users' groups assignments across wikis
3629 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3630 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3631 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3633 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3634 // To hide usernames from users and Sysops
3635 #$wgGroupPermissions['suppress']['hideuser'] = true;
3636 // To hide revisions/log items from users and Sysops
3637 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3638 // For private suppression log access
3639 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3642 * The developer group is deprecated, but can be activated if need be
3643 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3644 * that a lock file be defined and creatable/removable by the web
3647 # $wgGroupPermissions['developer']['siteadmin'] = true;
3652 * Permission keys revoked from users in each group.
3653 * This acts the same way as wgGroupPermissions above, except that
3654 * if the user is in a group here, the permission will be removed from them.
3656 * Improperly setting this could mean that your users will be unable to perform
3657 * certain essential tasks, so use at your own risk!
3659 $wgRevokePermissions = array();
3662 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3664 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3667 * A map of group names that the user is in, to group names that those users
3668 * are allowed to add or revoke.
3670 * Setting the list of groups to add or revoke to true is equivalent to "any group".
3672 * For example, to allow sysops to add themselves to the "bot" group:
3674 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3676 * Implicit groups may be used for the source group, for instance:
3678 * $wgGroupsRemoveFromSelf = array( '*' => true );
3680 * This allows users in the '*' group (i.e. any user) to remove themselves from
3681 * any group that they happen to be in.
3684 $wgGroupsAddToSelf = array();
3686 /** @see $wgGroupsAddToSelf */
3687 $wgGroupsRemoveFromSelf = array();
3690 * Set of available actions that can be restricted via action=protect
3691 * You probably shouldn't change this.
3692 * Translated through restriction-* messages.
3693 * Title::getRestrictionTypes() will remove restrictions that are not
3694 * applicable to a specific title (create and upload)
3696 $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
3699 * Rights which can be required for each protection level (via action=protect)
3701 * You can add a new protection level that requires a specific
3702 * permission by manipulating this array. The ordering of elements
3703 * dictates the order on the protection form's lists.
3705 * - '' will be ignored (i.e. unprotected)
3706 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
3708 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
3711 * Set the minimum permissions required to edit pages in each
3712 * namespace. If you list more than one permission, a user must
3713 * have all of them to edit pages in that namespace.
3715 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
3717 $wgNamespaceProtection = array();
3720 * Pages in namespaces in this array can not be used as templates.
3721 * Elements must be numeric namespace ids.
3722 * Among other things, this may be useful to enforce read-restrictions
3723 * which may otherwise be bypassed by using the template machanism.
3725 $wgNonincludableNamespaces = array();
3728 * Number of seconds an account is required to age before it's given the
3729 * implicit 'autoconfirm' group membership. This can be used to limit
3730 * privileges of new accounts.
3732 * Accounts created by earlier versions of the software may not have a
3733 * recorded creation date, and will always be considered to pass the age test.
3735 * When left at 0, all registered accounts will pass.
3739 * $wgAutoConfirmAge = 600; // ten minutes
3740 * $wgAutoConfirmAge = 3600*24; // one day
3743 $wgAutoConfirmAge = 0;
3746 * Number of edits an account requires before it is autoconfirmed.
3747 * Passing both this AND the time requirement is needed. Example:
3750 * $wgAutoConfirmCount = 50;
3753 $wgAutoConfirmCount = 0;
3756 * Automatically add a usergroup to any user who matches certain conditions.
3758 * array( '&' or '|' or '^' or '!', cond1, cond2, ... )
3759 * where cond1, cond2, ... are themselves conditions; *OR*
3760 * APCOND_EMAILCONFIRMED, *OR*
3761 * array( APCOND_EMAILCONFIRMED ), *OR*
3762 * array( APCOND_EDITCOUNT, number of edits ), *OR*
3763 * array( APCOND_AGE, seconds since registration ), *OR*
3764 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
3765 * array( APCOND_ISIP, ip ), *OR*
3766 * array( APCOND_IPINRANGE, range ), *OR*
3767 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
3768 * array( APCOND_BLOCKED ), *OR*
3769 * array( APCOND_ISBOT ), *OR*
3770 * similar constructs defined by extensions.
3772 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
3773 * user who has provided an e-mail address.
3775 $wgAutopromote = array(
3776 'autoconfirmed' => array( '&',
3777 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
3778 array( APCOND_AGE
, &$wgAutoConfirmAge ),
3783 * Automatically add a usergroup to any user who matches certain conditions.
3784 * Does not add the user to the group again if it has been removed.
3785 * Also, does not remove the group if the user no longer meets the criteria.
3788 * array( event => criteria, ... )
3790 * 'onEdit' (when user edits) or 'onView' (when user views the wiki)
3791 * and criteria has the same format as $wgAutopromote
3793 * @see $wgAutopromote
3796 $wgAutopromoteOnce = array(
3797 'onEdit' => array(),
3802 * Put user rights log entries for autopromotion in recent changes?
3805 $wgAutopromoteOnceLogInRC = true;
3808 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
3809 * can assign which groups at Special:Userrights. Example configuration:
3812 * // Bureaucrat can add any group
3813 * $wgAddGroups['bureaucrat'] = true;
3814 * // Bureaucrats can only remove bots and sysops
3815 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
3816 * // Sysops can make bots
3817 * $wgAddGroups['sysop'] = array( 'bot' );
3818 * // Sysops can disable other sysops in an emergency, and disable bots
3819 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
3822 $wgAddGroups = array();
3823 /** @see $wgAddGroups */
3824 $wgRemoveGroups = array();
3827 * A list of available rights, in addition to the ones defined by the core.
3828 * For extensions only.
3830 $wgAvailableRights = array();
3833 * Optional to restrict deletion of pages with higher revision counts
3834 * to users with the 'bigdelete' permission. (Default given to sysops.)
3836 $wgDeleteRevisionsLimit = 0;
3838 /** Number of accounts each IP address may create, 0 to disable.
3839 * Requires memcached */
3840 $wgAccountCreationThrottle = 0;
3843 * Edits matching these regular expressions in body text
3844 * will be recognised as spam and rejected automatically.
3846 * There's no administrator override on-wiki, so be careful what you set. :)
3847 * May be an array of regexes or a single string for backwards compatibility.
3849 * See http://en.wikipedia.org/wiki/Regular_expression
3850 * Note that each regex needs a beginning/end delimiter, eg: # or /
3852 $wgSpamRegex = array();
3854 /** Same as the above except for edit summaries */
3855 $wgSummarySpamRegex = array();
3858 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3861 $wgEnableDnsBlacklist = false;
3864 * @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for backward
3867 $wgEnableSorbs = false;
3870 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true. This is an
3871 * array of either a URL or an array with the URL and a key (should the blacklist
3872 * require a key). For example:
3874 * $wgDnsBlacklistUrls = array(
3875 * // String containing URL
3876 * 'http.dnsbl.sorbs.net',
3877 * // Array with URL and key, for services that require a key
3878 * array( 'dnsbl.httpbl.net', 'mykey' ),
3879 * // Array with just the URL. While this works, it is recommended that you
3880 * // just use a string as shown above
3881 * array( 'opm.tornevall.org' )
3886 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3889 * @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for backward
3892 $wgSorbsUrl = array();
3895 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3896 * what the other methods might say.
3898 $wgProxyWhitelist = array();
3901 * Simple rate limiter options to brake edit floods. Maximum number actions
3902 * allowed in the given number of seconds; after that the violating client re-
3903 * ceives HTTP 500 error pages until the period elapses.
3905 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3907 * This option set is experimental and likely to change. Requires memcached.
3909 $wgRateLimits = array(
3911 'anon' => null, // for any and all anonymous edits (aggregate)
3912 'user' => null, // for each logged-in user
3913 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3914 'ip' => null, // for each anon and recent account
3915 'subnet' => null, // ... with final octet removed
3923 'mailpassword' => array(
3926 'emailuser' => array(
3932 * Set to a filename to log rate limiter hits.
3934 $wgRateLimitLog = null;
3937 * Array of IPs which should be excluded from rate limits.
3938 * This may be useful for whitelisting NAT gateways for conferences, etc.
3940 $wgRateLimitsExcludedIPs = array();
3943 * Log IP addresses in the recentchanges table; can be accessed only by
3944 * extensions (e.g. CheckUser) or a DB admin
3946 $wgPutIPinRC = true;
3949 * Integer defining default number of entries to show on
3950 * special pages which are query-pages such as Special:Whatlinkshere.
3952 $wgQueryPageDefaultLimit = 50;
3955 * Limit password attempts to X attempts per Y seconds per IP per account.
3956 * Requires memcached.
3958 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3960 /** @} */ # end of user rights settings
3962 /************************************************************************//**
3963 * @name Proxy scanner settings
3968 * If you enable this, every editor's IP address will be scanned for open HTTP
3971 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
3972 * ISP and ask for your server to be shut down.
3974 * You have been warned.
3976 $wgBlockOpenProxies = false;
3977 /** Port we want to scan for a proxy */
3978 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
3979 /** Script used to scan */
3980 $wgProxyScriptPath = "$IP/maintenance/proxy_check.php";
3982 $wgProxyMemcExpiry = 86400;
3983 /** This should always be customised in LocalSettings.php */
3984 $wgSecretKey = false;
3985 /** big list of banned IP addresses, in the keys not the values */
3986 $wgProxyList = array();
3988 $wgProxyKey = false;
3990 /** @} */ # end of proxy scanner settings
3992 /************************************************************************//**
3993 * @name Cookie settings
3998 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
4000 $wgCookieExpiration = 180*86400;
4003 * Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
4004 * or ".any.subdomain.net"
4006 $wgCookieDomain = '';
4010 * Set this variable if you want to restrict cookies to a certain path within
4011 * the domain specified by $wgCookieDomain.
4013 $wgCookiePath = '/';
4016 * Whether the "secure" flag should be set on the cookie. This can be:
4017 * - true: Set secure flag
4018 * - false: Don't set secure flag
4019 * - "detect": Set the secure flag if $wgServer is set to an HTTPS URL
4021 $wgCookieSecure = 'detect';
4024 * By default, MediaWiki checks if the client supports cookies during the
4025 * login process, so that it can display an informative error message if
4026 * cookies are disabled. Set this to true if you want to disable this cookie
4029 $wgDisableCookieCheck = false;
4032 * Cookies generated by MediaWiki have names starting with this prefix. Set it
4033 * to a string to use a custom prefix. Setting it to false causes the database
4034 * name to be used as a prefix.
4036 $wgCookiePrefix = false;
4039 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
4040 * in browsers that support this feature. This can mitigates some classes of
4043 $wgCookieHttpOnly = true;
4046 * If the requesting browser matches a regex in this blacklist, we won't
4047 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
4049 $wgHttpOnlyBlacklist = array(
4050 // Internet Explorer for Mac; sometimes the cookies work, sometimes
4051 // they don't. It's difficult to predict, as combinations of path
4052 // and expiration options affect its parsing.
4053 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
4056 /** A list of cookies that vary the cache (for use by extensions) */
4057 $wgCacheVaryCookies = array();
4059 /** Override to customise the session name */
4060 $wgSessionName = false;
4062 /** @} */ # end of cookie settings }
4064 /************************************************************************//**
4065 * @name LaTeX (mathematical formulas)
4070 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
4071 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
4072 * (ImageMagick) installed and available in the PATH.
4073 * Please see math/README for more information.
4077 /* @} */ # end LaTeX }
4079 /************************************************************************//**
4080 * @name Profiling, testing and debugging
4082 * To enable profiling, edit StartProfiler.php
4088 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
4089 * The debug log file should be not be publicly accessible if it is used, as it
4090 * may contain private data.
4092 $wgDebugLogFile = '';
4095 * Prefix for debug log lines
4097 $wgDebugLogPrefix = '';
4100 * If true, instead of redirecting, show a page with a link to the redirect
4101 * destination. This allows for the inspection of PHP error messages, and easy
4102 * resubmission of form data. For developer use only.
4104 $wgDebugRedirects = false;
4107 * If true, log debugging data from action=raw and load.php.
4108 * This is normally false to avoid overlapping debug entries due to gen=css and
4111 $wgDebugRawPage = false;
4114 * Send debug data to an HTML comment in the output.
4116 * This may occasionally be useful when supporting a non-technical end-user. It's
4117 * more secure than exposing the debug log file to the web, since the output only
4118 * contains private data for the current user. But it's not ideal for development
4119 * use since data is lost on fatal errors and redirects.
4121 $wgDebugComments = false;
4124 * Extensive database transaction state debugging
4126 $wgDebugDBTransactions = false;
4129 * Write SQL queries to the debug log
4131 $wgDebugDumpSql = false;
4134 * Set to an array of log group keys to filenames.
4135 * If set, wfDebugLog() output for that group will go to that file instead
4136 * of the regular $wgDebugLogFile. Useful for enabling selective logging
4139 $wgDebugLogGroups = array();
4142 * Display debug data at the bottom of the main content area.
4144 * Useful for developers and technical users trying to working on a closed wiki.
4146 $wgShowDebug = false;
4149 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
4150 * Since 1.19 also includes memory usage.
4152 $wgDebugTimestamps = false;
4155 * Print HTTP headers for every request in the debug information.
4157 $wgDebugPrintHttpHeaders = true;
4160 * Show the contents of $wgHooks in Special:Version
4162 $wgSpecialVersionShowHooks = false;
4165 * Whether to show "we're sorry, but there has been a database error" pages.
4166 * Displaying errors aids in debugging, but may display information useful
4169 $wgShowSQLErrors = false;
4172 * If set to true, uncaught exceptions will print a complete stack trace
4173 * to output. This should only be used for debugging, as it may reveal
4174 * private information in function parameters due to PHP's backtrace
4177 $wgShowExceptionDetails = false;
4180 * If true, show a backtrace for database errors
4182 $wgShowDBErrorBacktrace = false;
4185 * If true, send the exception backtrace to the error log
4187 $wgLogExceptionBacktrace = true;
4190 * Expose backend server host names through the API and various HTML comments
4192 $wgShowHostnames = false;
4195 * Override server hostname detection with a hardcoded value.
4196 * Should be a string, default false.
4199 $wgOverrideHostname = false;
4202 * If set to true MediaWiki will throw notices for some possible error
4203 * conditions and for deprecated functions.
4205 $wgDevelopmentWarnings = false;
4208 * Release limitation to wfDeprecated warnings, if set to a release number
4209 * development warnings will not be generated for deprecations added in releases
4212 $wgDeprecationReleaseLimit = false;
4214 /** Only record profiling info for pages that took longer than this */
4215 $wgProfileLimit = 0.0;
4217 /** Don't put non-profiling info into log file */
4218 $wgProfileOnly = false;
4221 * Log sums from profiling into "profiling" table in db.
4223 * You have to create a 'profiling' table in your database before using
4224 * this feature, see maintenance/archives/patch-profiling.sql
4226 * To enable profiling, edit StartProfiler.php
4228 $wgProfileToDatabase = false;
4230 /** If true, print a raw call tree instead of per-function report */
4231 $wgProfileCallTree = false;
4233 /** Should application server host be put into profiling table */
4234 $wgProfilePerHost = false;
4237 * Host for UDP profiler.
4239 * The host should be running a daemon which can be obtained from MediaWiki
4240 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
4242 $wgUDPProfilerHost = '127.0.0.1';
4245 * Port for UDP profiler.
4246 * @see $wgUDPProfilerHost
4248 $wgUDPProfilerPort = '3811';
4250 /** Detects non-matching wfProfileIn/wfProfileOut calls */
4251 $wgDebugProfiling = false;
4253 /** Output debug message on every wfProfileIn/wfProfileOut */
4254 $wgDebugFunctionEntry = false;
4257 * Destination for wfIncrStats() data...
4258 * 'cache' to go into the system cache, if enabled (memcached)
4259 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
4262 $wgStatsMethod = 'cache';
4265 * When $wgStatsMethod is 'udp', setting this to a string allows statistics to
4266 * be aggregated over more than one wiki. The string will be used in place of
4267 * the DB name in outgoing UDP packets. If this is set to false, the DB name
4270 $wgAggregateStatsID = false;
4272 /** Whereas to count the number of time an article is viewed.
4273 * Does not work if pages are cached (for example with squid).
4275 $wgDisableCounters = false;
4278 * Set this to an integer to only do synchronous site_stats updates
4279 * one every *this many* updates. The other requests go into pending
4280 * delta values in $wgMemc. Make sure that $wgMemc is a global cache.
4281 * If set to -1, updates *only* go to $wgMemc (useful for daemons).
4283 $wgSiteStatsAsyncFactor = false;
4286 * Parser test suite files to be run by parserTests.php when no specific
4287 * filename is passed to it.
4289 * Extensions may add their own tests to this array, or site-local tests
4290 * may be added via LocalSettings.php
4294 $wgParserTestFiles = array(
4295 "$IP/tests/parser/parserTests.txt",
4296 "$IP/tests/parser/extraParserTests.txt"
4300 * If configured, specifies target CodeReview installation to send test
4301 * result data from 'parserTests.php --upload'
4303 * Something like this:
4304 * $wgParserTestRemote = array(
4305 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
4306 * 'repo' => 'MediaWiki',
4307 * 'suite' => 'ParserTests',
4308 * 'path' => '/trunk/phase3', // not used client-side; for reference
4309 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
4312 $wgParserTestRemote = false;
4315 * Allow running of javascript test suites via [[Special:JavaScriptTest]] (such as QUnit).
4317 $wgEnableJavaScriptTest = false;
4320 * Configuration for javascript testing.
4322 $wgJavaScriptTestConfig = array(
4324 // Page where documentation can be found relevant to the QUnit test suite being ran.
4325 // Used in the intro paragraph on [[Special:JavaScriptTest/qunit]] for the
4326 // documentation link in the "javascripttest-qunit-intro" message.
4327 'documentation' => '//www.mediawiki.org/wiki/Manual:JavaScript_unit_testing',
4328 // If you are submitting the QUnit test suite to a TestSwarm instance,
4329 // point this to the "inject.js" script of that instance. This is was registers
4330 // the QUnit hooks to extract the test results and push them back up into the
4331 // TestSwarm database.
4332 // @example 'http://localhost/testswarm/js/inject.js'
4333 // @example '//integration.mediawiki.org/testswarm/js/inject.js'
4334 'testswarm-injectjs' => false,
4340 * Overwrite the caching key prefix with custom value.
4343 $wgCachePrefix = false;
4346 * Display the new debugging toolbar. This also enables profiling on database
4347 * queries and other useful output.
4348 * Will disable file cache.
4352 $wgDebugToolbar = false;
4354 /** @} */ # end of profiling, testing and debugging }
4356 /************************************************************************//**
4362 * Set this to true to disable the full text search feature.
4364 $wgDisableTextSearch = false;
4367 * Set to true to have nicer highligted text in search results,
4368 * by default off due to execution overhead
4370 $wgAdvancedSearchHighlighting = false;
4373 * Regexp to match word boundaries, defaults for non-CJK languages
4374 * should be empty for CJK since the words are not separate
4376 $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
4379 * Set to true to have the search engine count total
4380 * search matches to present in the Special:Search UI.
4381 * Not supported by every search engine shipped with MW.
4383 * This could however be slow on larger wikis, and is pretty flaky
4384 * with the current title vs content split. Recommend avoiding until
4385 * that's been worked out cleanly; but this may aid in testing the
4386 * search UI and API to confirm that the result count works.
4388 $wgCountTotalSearchHits = false;
4391 * Template for OpenSearch suggestions, defaults to API action=opensearch
4393 * Sites with heavy load would tipically have these point to a custom
4394 * PHP wrapper to avoid firing up mediawiki for every keystroke
4396 * Placeholders: {searchTerms}
4399 $wgOpenSearchTemplate = false;
4402 * Enable suggestions while typing in search boxes
4403 * (results are passed around in OpenSearch format)
4404 * Requires $wgEnableOpenSearchSuggest = true;
4406 $wgEnableMWSuggest = false;
4409 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
4410 * false if you've disabled MWSuggest or another suggestion script and
4411 * want reduce load caused by cached scripts pulling suggestions.
4413 $wgEnableOpenSearchSuggest = true;
4416 * Expiry time for search suggestion responses
4418 $wgSearchSuggestCacheExpiry = 1200;
4421 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
4423 * Placeholders: {searchTerms}, {namespaces}, {dbname}
4426 $wgMWSuggestTemplate = false;
4429 * If you've disabled search semi-permanently, this also disables updates to the
4430 * table. If you ever re-enable, be sure to rebuild the search table.
4432 $wgDisableSearchUpdate = false;
4435 * List of namespaces which are searched by default. Example:
4438 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
4439 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
4442 $wgNamespacesToBeSearchedDefault = array(
4447 * Namespaces to be searched when user clicks the "Help" tab
4450 * Same format as $wgNamespacesToBeSearchedDefault
4452 $wgNamespacesToBeSearchedHelp = array(
4458 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
4459 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
4462 $wgSearchEverythingOnlyLoggedIn = false;
4465 * Disable the internal MySQL-based search, to allow it to be
4466 * implemented by an extension instead.
4468 $wgDisableInternalSearch = false;
4471 * Set this to a URL to forward search requests to some external location.
4472 * If the URL includes '$1', this will be replaced with the URL-encoded
4475 * For example, to forward to Google you'd have something like:
4476 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
4477 * '&domains=http://example.com' .
4478 * '&sitesearch=http://example.com' .
4479 * '&ie=utf-8&oe=utf-8';
4481 $wgSearchForwardUrl = null;
4484 * Search form behavior
4485 * true = use Go & Search buttons
4486 * false = use Go button & Advanced search link
4488 $wgUseTwoButtonsSearchForm = true;
4491 * Array of namespaces to generate a Google sitemap for when the
4492 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4493 * nerated for all namespaces.
4495 $wgSitemapNamespaces = false;
4498 * Custom namespace priorities for sitemaps. Setting this will allow you to
4499 * set custom priorities to namsepaces when sitemaps are generated using the
4500 * maintenance/generateSitemap.php script.
4502 * This should be a map of namespace IDs to priority
4504 * $wgSitemapNamespacesPriorities = array(
4509 $wgSitemapNamespacesPriorities = false;
4512 * If true, searches for IP addresses will be redirected to that IP's
4513 * contributions page. E.g. searching for "1.2.3.4" will redirect to
4514 * [[Special:Contributions/1.2.3.4]]
4516 $wgEnableSearchContributorsByIP = true;
4518 /** @} */ # end of search settings
4520 /************************************************************************//**
4521 * @name Edit user interface
4526 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
4527 * fall back to the old behaviour (no merging).
4529 $wgDiff3 = '/usr/bin/diff3';
4532 * Path to the GNU diff utility.
4534 $wgDiff = '/usr/bin/diff';
4537 * Which namespaces have special treatment where they should be preview-on-open
4538 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
4539 * can specify namespaces of pages they have special treatment for
4541 $wgPreviewOnOpenNamespaces = array(
4546 * Activate external editor interface for files and pages
4547 * See http://www.mediawiki.org/wiki/Manual:External_editors
4549 $wgUseExternalEditor = true;
4551 /** Go button goes straight to the edit screen if the article doesn't exist. */
4552 $wgGoToEdit = false;
4555 * Enable the UniversalEditButton for browsers that support it
4556 * (currently only Firefox with an extension)
4557 * See http://universaleditbutton.org for more background information
4559 $wgUniversalEditButton = true;
4562 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4563 * will try to automatically create one. This feature can be disabled by set-
4564 * ting this variable false.
4566 $wgUseAutomaticEditSummaries = true;
4568 /** @} */ # end edit UI }
4570 /************************************************************************//**
4572 * See also $wgSiteNotice
4577 * @cond file_level_code
4578 * Set $wgCommandLineMode if it's not set already, to avoid notices
4580 if( !isset( $wgCommandLineMode ) ) {
4581 $wgCommandLineMode = false;
4585 /** For colorized maintenance script output, is your terminal background dark ? */
4586 $wgCommandLineDarkBg = false;
4589 * Array for extensions to register their maintenance scripts with the
4590 * system. The key is the name of the class and the value is the full
4593 $wgMaintenanceScripts = array();
4596 * Set this to a string to put the wiki into read-only mode. The text will be
4597 * used as an explanation to users.
4599 * This prevents most write operations via the web interface. Cache updates may
4600 * still be possible. To prevent database writes completely, use the read_only
4606 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
4607 * Its contents will be shown to users as part of the read-only warning
4610 * Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
4612 $wgReadOnlyFile = false;
4615 * When you run the web-based upgrade utility, it will tell you what to set
4616 * this to in order to authorize the upgrade process. It will subsequently be
4617 * used as a password, to authorize further upgrades.
4619 * For security, do not set this to a guessable string. Use the value supplied
4620 * by the install/upgrade process. To cause the upgrader to generate a new key,
4621 * delete the old key from LocalSettings.php.
4623 $wgUpgradeKey = false;
4626 * Map GIT repository URLs to viewer URLs to provide links in Special:Version
4628 * Key is a pattern passed to preg_match() and preg_replace(),
4629 * without the delimiters (which are #) and must match the whole URL.
4630 * The value is the replacement for the key (it can contain $1, etc.)
4631 * %h will be replaced by the short SHA-1 (7 first chars) and %H by the
4632 * full SHA-1 of the HEAD revision.
4634 $wgGitRepositoryViewers = array(
4635 'https://gerrit.wikimedia.org/r/p/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
4636 'ssh://(?:[a-z0-9_]+@)?gerrit.wikimedia.org:29418/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
4639 /** @} */ # End of maintenance }
4641 /************************************************************************//**
4642 * @name Recent changes, new pages, watchlist and history
4647 * Recentchanges items are periodically purged; entries older than this many
4649 * Default: 13 weeks = about three months
4651 $wgRCMaxAge = 13 * 7 * 24 * 3600;
4654 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
4655 * higher than what will be stored. Note that this is disabled by default
4656 * because we sometimes do have RC data which is beyond the limit for some
4657 * reason, and some users may use the high numbers to display that data which
4660 $wgRCFilterByAge = false;
4663 * List of Days and Limits options to list in the Special:Recentchanges and
4664 * Special:Recentchangeslinked pages.
4666 $wgRCLinkLimits = array( 50, 100, 250, 500 );
4667 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
4670 * Send recent changes updates via UDP. The updates will be formatted for IRC.
4671 * Set this to the IP address of the receiver.
4673 $wgRC2UDPAddress = false;
4676 * Port number for RC updates
4678 $wgRC2UDPPort = false;
4681 * Prefix to prepend to each UDP packet.
4682 * This can be used to identify the wiki. A script is available called
4683 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
4684 * tab to identify the IRC channel to send the log line to.
4686 $wgRC2UDPPrefix = '';
4689 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
4690 * IRC feed. If this is set to a string, that string will be used as the prefix.
4692 $wgRC2UDPInterwikiPrefix = false;
4695 * Set to true to omit "bot" edits (by users with the bot permission) from the
4698 $wgRC2UDPOmitBots = false;
4701 * Enable user search in Special:Newpages
4702 * This is really a temporary hack around an index install bug on some Wikipedias.
4703 * Kill it once fixed.
4705 $wgEnableNewpagesUserFilter = true;
4707 /** Use RC Patrolling to check for vandalism */
4708 $wgUseRCPatrol = true;
4710 /** Use new page patrolling to check new pages on Special:Newpages */
4711 $wgUseNPPatrol = true;
4713 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
4716 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
4717 * eg Recentchanges, Newpages. */
4720 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
4721 * A cached version will continue to be served out even if changes
4722 * are made, until this many seconds runs out since the last render.
4724 * If set to 0, feed caching is disabled. Use this for debugging only;
4725 * feed generation can be pretty slow with diffs.
4727 $wgFeedCacheTimeout = 60;
4729 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
4730 * pages larger than this size. */
4731 $wgFeedDiffCutoff = 32768;
4733 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
4734 * every page. Some sites might have a different feed they'd like to promote
4735 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
4736 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
4737 * of either 'rss' or 'atom'.
4739 $wgOverrideSiteFeed = array();
4742 * Available feeds objects
4743 * Should probably only be defined when a page is syndicated ie when
4744 * $wgOut->isSyndicated() is true
4746 $wgFeedClasses = array(
4748 'atom' => 'AtomFeed',
4752 * Which feed types should we provide by default? This can include 'rss',
4753 * 'atom', neither, or both.
4755 $wgAdvertisedFeedTypes = array( 'atom' );
4757 /** Show watching users in recent changes, watchlist and page history views */
4758 $wgRCShowWatchingUsers = false; # UPO
4759 /** Show watching users in Page views */
4760 $wgPageShowWatchingUsers = false;
4761 /** Show the amount of changed characters in recent changes */
4762 $wgRCShowChangedSize = true;
4765 * If the difference between the character counts of the text
4766 * before and after the edit is below that value, the value will be
4767 * highlighted on the RC page.
4769 $wgRCChangedSizeThreshold = 500;
4772 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
4773 * view for watched pages with new changes */
4774 $wgShowUpdatedMarker = true;
4777 * Disable links to talk pages of anonymous users (IPs) in listings on special
4778 * pages like page history, Special:Recentchanges, etc.
4780 $wgDisableAnonTalk = false;
4783 * Enable filtering of categories in Recentchanges
4785 $wgAllowCategorizedRecentChanges = false;
4788 * Allow filtering by change tag in recentchanges, history, etc
4789 * Has no effect if no tags are defined in valid_tag.
4791 $wgUseTagFilter = true;
4793 /** @} */ # end RC/watchlist }
4795 /************************************************************************//**
4796 * @name Copyright and credits settings
4801 * Override for copyright metadata.
4803 * This is the name of the page containing information about the wiki's copyright status,
4804 * which will be added as a link in the footer if it is specified. It overrides
4805 * $wgRightsUrl if both are specified.
4807 $wgRightsPage = null;
4810 * Set this to specify an external URL containing details about the content license used on your wiki.
4811 * If $wgRightsPage is set then this setting is ignored.
4813 $wgRightsUrl = null;
4816 * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
4817 * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
4818 * page will also be used as the link if this variable is not set.
4820 $wgRightsText = null;
4823 * Override for copyright metadata.
4825 $wgRightsIcon = null;
4828 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
4830 $wgLicenseTerms = false;
4833 * Set this to some HTML to override the rights icon with an arbitrary logo
4834 * @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright']
4836 $wgCopyrightIcon = null;
4838 /** Set this to true if you want detailed copyright information forms on Upload. */
4839 $wgUseCopyrightUpload = false;
4842 * Set this to the number of authors that you want to be credited below an
4843 * article text. Set it to zero to hide the attribution block, and a negative
4844 * number (like -1) to show all authors. Note that this will require 2-3 extra
4845 * database hits, which can have a not insignificant impact on performance for
4850 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
4851 * Otherwise, link to a separate credits page. */
4852 $wgShowCreditsIfMax = true;
4854 /** @} */ # end of copyright and credits settings }
4856 /************************************************************************//**
4857 * @name Import / Export
4862 * List of interwiki prefixes for wikis we'll accept as sources for
4863 * Special:Import (for sysops). Since complete page history can be imported,
4864 * these should be 'trusted'.
4866 * If a user has the 'import' permission but not the 'importupload' permission,
4867 * they will only be able to run imports through this transwiki interface.
4869 $wgImportSources = array();
4872 * Optional default target namespace for interwiki imports.
4873 * Can use this to create an incoming "transwiki"-style queue.
4874 * Set to numeric key, not the name.
4876 * Users may override this in the Special:Import dialog.
4878 $wgImportTargetNamespace = null;
4881 * If set to false, disables the full-history option on Special:Export.
4882 * This is currently poorly optimized for long edit histories, so is
4883 * disabled on Wikimedia's sites.
4885 $wgExportAllowHistory = true;
4888 * If set nonzero, Special:Export requests for history of pages with
4889 * more revisions than this will be rejected. On some big sites things
4890 * could get bogged down by very very long pages.
4892 $wgExportMaxHistory = 0;
4895 * Return distinct author list (when not returning full history)
4897 $wgExportAllowListContributors = false;
4900 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
4901 * up to this specified level, which will cause it to include all
4902 * pages linked to from the pages you specify. Since this number
4903 * can become *insanely large* and could easily break your wiki,
4904 * it's disabled by default for now.
4906 * There's a HARD CODED limit of 5 levels of recursion to prevent a
4907 * crazy-big export from being done by someone setting the depth
4908 * number too high. In other words, last resort safety net.
4910 $wgExportMaxLinkDepth = 0;
4913 * Whether to allow the "export all pages in namespace" option
4915 $wgExportFromNamespaces = false;
4918 * Whether to allow exporting the entire wiki into a single file
4920 $wgExportAllowAll = false;
4922 /** @} */ # end of import/export }
4924 /*************************************************************************//**
4930 * A list of callback functions which are called once MediaWiki is fully initialised
4932 $wgExtensionFunctions = array();
4935 * Extension messages files.
4937 * Associative array mapping extension name to the filename where messages can be
4938 * found. The file should contain variable assignments. Any of the variables
4939 * present in languages/messages/MessagesEn.php may be defined, but $messages
4940 * is the most common.
4942 * Variables defined in extensions will override conflicting variables defined
4946 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
4949 $wgExtensionMessagesFiles = array();
4952 * Parser output hooks.
4953 * This is an associative array where the key is an extension-defined tag
4954 * (typically the extension name), and the value is a PHP callback.
4955 * These will be called as an OutputPageParserOutput hook, if the relevant
4956 * tag has been registered with the parser output object.
4958 * Registration is done with $pout->addOutputHook( $tag, $data ).
4960 * The callback has the form:
4961 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
4963 $wgParserOutputHooks = array();
4966 * List of valid skin names.
4967 * The key should be the name in all lower case, the value should be a properly
4968 * cased name for the skin. This value will be prefixed with "Skin" to create the
4969 * class name of the skin to load, and if the skin's class cannot be found through
4970 * the autoloader it will be used to load a .php file by that name in the skins directory.
4971 * The default skins will be added later, by Skin::getSkinNames(). Use
4972 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
4974 $wgValidSkinNames = array();
4977 * Special page list.
4978 * See the top of SpecialPage.php for documentation.
4980 $wgSpecialPages = array();
4983 * Array mapping class names to filenames, for autoloading.
4985 $wgAutoloadClasses = array();
4988 * An array of extension types and inside that their names, versions, authors,
4989 * urls, descriptions and pointers to localized description msgs. Note that
4990 * the version, url, description and descriptionmsg key can be omitted.
4993 * $wgExtensionCredits[$type][] = array(
4994 * 'name' => 'Example extension',
4996 * 'path' => __FILE__,
4997 * 'author' => 'Foo Barstein',
4998 * 'url' => 'http://wwww.example.com/Example%20Extension/',
4999 * 'description' => 'An example extension',
5000 * 'descriptionmsg' => 'exampleextension-desc',
5004 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
5005 * Where 'descriptionmsg' can be an array with message key and parameters:
5006 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
5008 $wgExtensionCredits = array();
5011 * Authentication plugin.
5012 * @var $wgAuth AuthPlugin
5017 * Global list of hooks.
5018 * Add a hook by doing:
5019 * $wgHooks['event_name'][] = $function;
5021 * $wgHooks['event_name'][] = array($function, $data);
5023 * $wgHooks['event_name'][] = array($object, 'method');
5028 * Maps jobs to their handling classes; extensions
5029 * can add to this to provide custom jobs
5031 $wgJobClasses = array(
5032 'refreshLinks' => 'RefreshLinksJob',
5033 'refreshLinks2' => 'RefreshLinksJob2',
5034 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
5035 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
5036 'sendMail' => 'EmaillingJob',
5037 'enotifNotify' => 'EnotifNotifyJob',
5038 'fixDoubleRedirect' => 'DoubleRedirectJob',
5039 'uploadFromUrl' => 'UploadFromUrlJob',
5044 * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
5047 * - Very long-running jobs.
5048 * - Jobs that you would never want to run as part of a page rendering request.
5049 * - Jobs that you want to run on specialized machines ( like transcoding, or a particular
5050 * machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
5052 $wgJobTypesExcludedFromDefaultQueue = array();
5055 * Additional functions to be performed with updateSpecialPages.
5056 * Expensive Querypages are already updated.
5058 $wgSpecialPageCacheUpdates = array(
5059 'Statistics' => array( 'SiteStatsUpdate', 'cacheUpdate' )
5063 * Hooks that are used for outputting exceptions. Format is:
5064 * $wgExceptionHooks[] = $funcname
5066 * $wgExceptionHooks[] = array( $class, $funcname )
5067 * Hooks should return strings or false
5069 $wgExceptionHooks = array();
5072 * Page property link table invalidation lists. When a page property
5073 * changes, this may require other link tables to be updated (eg
5074 * adding __HIDDENCAT__ means the hiddencat tracking category will
5075 * have been added, so the categorylinks table needs to be rebuilt).
5076 * This array can be added to by extensions.
5078 $wgPagePropLinkInvalidations = array(
5079 'hiddencat' => 'categorylinks',
5082 /** @} */ # End extensions }
5084 /*************************************************************************//**
5090 * Use experimental, DMOZ-like category browser
5092 $wgUseCategoryBrowser = false;
5095 * On category pages, show thumbnail gallery for images belonging to that
5096 * category instead of listing them as articles.
5098 $wgCategoryMagicGallery = true;
5101 * Paging limit for categories
5103 $wgCategoryPagingLimit = 200;
5106 * Specify how category names should be sorted, when listed on a category page.
5107 * A sorting scheme is also known as a collation.
5109 * Available values are:
5111 * - uppercase: Converts the category name to upper case, and sorts by that.
5113 * - identity: Does no conversion. Sorts by binary value of the string.
5115 * - uca-default: Provides access to the Unicode Collation Algorithm with
5116 * the default element table. This is a compromise collation which sorts
5117 * all languages in a mediocre way. However, it is better than "uppercase".
5119 * To use the uca-default collation, you must have PHP's intl extension
5120 * installed. See http://php.net/manual/en/intl.setup.php . The details of the
5121 * resulting collation will depend on the version of ICU installed on the
5124 * After you change this, you must run maintenance/updateCollation.php to fix
5125 * the sort keys in the database.
5127 * Extensions can define there own collations by subclassing Collation
5128 * and using the Collation::factory hook.
5130 $wgCategoryCollation = 'uppercase';
5132 /** @} */ # End categories }
5134 /*************************************************************************//**
5140 * The logging system has two levels: an event type, which describes the
5141 * general category and can be viewed as a named subset of all logs; and
5142 * an action, which is a specific kind of event that can exist in that
5145 $wgLogTypes = array(
5160 * This restricts log access to those who have a certain right
5161 * Users without this will not see it in the option menu and can not view it
5162 * Restricted logs are not added to recent changes
5163 * Logs should remain non-transcludable
5164 * Format: logtype => permissiontype
5166 $wgLogRestrictions = array(
5167 'suppress' => 'suppressionlog'
5171 * Show/hide links on Special:Log will be shown for these log types.
5173 * This is associative array of log type => boolean "hide by default"
5175 * See $wgLogTypes for a list of available log types.
5178 * $wgFilterLogTypes => array(
5180 * 'import' => false,
5183 * Will display show/hide links for the move and import logs. Move logs will be
5184 * hidden by default unless the link is clicked. Import logs will be shown by
5185 * default, and hidden when the link is clicked.
5187 * A message of the form log-show-hide-[type] should be added, and will be used
5188 * for the link text.
5190 $wgFilterLogTypes = array(
5195 * Lists the message key string for each log type. The localized messages
5196 * will be listed in the user interface.
5198 * Extensions with custom log types may add to this array.
5200 * Since 1.19, if you follow the naming convention log-name-TYPE,
5201 * where TYPE is your log type, yoy don't need to use this array.
5203 $wgLogNames = array(
5204 '' => 'all-logs-page',
5205 'block' => 'blocklogpage',
5206 'protect' => 'protectlogpage',
5207 'rights' => 'rightslog',
5208 'delete' => 'dellogpage',
5209 'upload' => 'uploadlogpage',
5210 'move' => 'movelogpage',
5211 'import' => 'importlogpage',
5212 'patrol' => 'patrol-log-page',
5213 'merge' => 'mergelog',
5214 'suppress' => 'suppressionlog',
5218 * Lists the message key string for descriptive text to be shown at the
5219 * top of each log type.
5221 * Extensions with custom log types may add to this array.
5223 * Since 1.19, if you follow the naming convention log-description-TYPE,
5224 * where TYPE is your log type, yoy don't need to use this array.
5226 $wgLogHeaders = array(
5227 '' => 'alllogstext',
5228 'block' => 'blocklogtext',
5229 'protect' => 'protectlogtext',
5230 'rights' => 'rightslogtext',
5231 'delete' => 'dellogpagetext',
5232 'upload' => 'uploadlogpagetext',
5233 'move' => 'movelogpagetext',
5234 'import' => 'importlogpagetext',
5235 'patrol' => 'patrol-log-header',
5236 'merge' => 'mergelogpagetext',
5237 'suppress' => 'suppressionlogtext',
5241 * Lists the message key string for formatting individual events of each
5242 * type and action when listed in the logs.
5244 * Extensions with custom log types may add to this array.
5246 $wgLogActions = array(
5247 'block/block' => 'blocklogentry',
5248 'block/unblock' => 'unblocklogentry',
5249 'block/reblock' => 'reblock-logentry',
5250 'protect/protect' => 'protectedarticle',
5251 'protect/modify' => 'modifiedarticleprotection',
5252 'protect/unprotect' => 'unprotectedarticle',
5253 'protect/move_prot' => 'movedarticleprotection',
5254 'rights/rights' => 'rightslogentry',
5255 'rights/autopromote' => 'rightslogentry-autopromote',
5256 'upload/upload' => 'uploadedimage',
5257 'upload/overwrite' => 'overwroteimage',
5258 'upload/revert' => 'uploadedimage',
5259 'import/upload' => 'import-logentry-upload',
5260 'import/interwiki' => 'import-logentry-interwiki',
5261 'merge/merge' => 'pagemerge-logentry',
5262 'suppress/block' => 'blocklogentry',
5263 'suppress/reblock' => 'reblock-logentry',
5267 * The same as above, but here values are names of functions,
5269 * @see LogPage::actionText
5272 $wgLogActionsHandlers = array(
5274 'move/*' => 'MoveLogFormatter',
5275 // delete, restore, revision, event
5276 'delete/*' => 'DeleteLogFormatter',
5277 'suppress/revision' => 'DeleteLogFormatter',
5278 'suppress/event' => 'DeleteLogFormatter',
5279 'suppress/delete' => 'DeleteLogFormatter',
5280 'patrol/patrol' => 'PatrolLogFormatter',
5284 * Maintain a log of newusers at Log/newusers?
5286 $wgNewUserLog = true;
5288 /** @} */ # end logging }
5290 /*************************************************************************//**
5291 * @name Special pages (general and miscellaneous)
5296 * Allow special page inclusions such as {{Special:Allpages}}
5298 $wgAllowSpecialInclusion = true;
5301 * Set this to an array of special page names to prevent
5302 * maintenance/updateSpecialPages.php from updating those pages.
5304 $wgDisableQueryPageUpdate = false;
5307 * List of special pages, followed by what subtitle they should go under
5308 * at Special:SpecialPages
5310 $wgSpecialPageGroups = array(
5311 'DoubleRedirects' => 'maintenance',
5312 'BrokenRedirects' => 'maintenance',
5313 'Lonelypages' => 'maintenance',
5314 'Uncategorizedpages' => 'maintenance',
5315 'Uncategorizedcategories' => 'maintenance',
5316 'Uncategorizedimages' => 'maintenance',
5317 'Uncategorizedtemplates' => 'maintenance',
5318 'Unusedcategories' => 'maintenance',
5319 'Unusedimages' => 'maintenance',
5320 'Protectedpages' => 'maintenance',
5321 'Protectedtitles' => 'maintenance',
5322 'Unusedtemplates' => 'maintenance',
5323 'Withoutinterwiki' => 'maintenance',
5324 'Longpages' => 'maintenance',
5325 'Shortpages' => 'maintenance',
5326 'Ancientpages' => 'maintenance',
5327 'Deadendpages' => 'maintenance',
5328 'Wantedpages' => 'maintenance',
5329 'Wantedcategories' => 'maintenance',
5330 'Wantedfiles' => 'maintenance',
5331 'Wantedtemplates' => 'maintenance',
5332 'Unwatchedpages' => 'maintenance',
5333 'Fewestrevisions' => 'maintenance',
5335 'Userlogin' => 'login',
5336 'Userlogout' => 'login',
5337 'CreateAccount' => 'login',
5339 'Recentchanges' => 'changes',
5340 'Recentchangeslinked' => 'changes',
5341 'Watchlist' => 'changes',
5342 'Newimages' => 'changes',
5343 'Newpages' => 'changes',
5345 'Tags' => 'changes',
5347 'Upload' => 'media',
5348 'Listfiles' => 'media',
5349 'MIMEsearch' => 'media',
5350 'FileDuplicateSearch' => 'media',
5351 'Filepath' => 'media',
5353 'Listusers' => 'users',
5354 'Activeusers' => 'users',
5355 'Listgrouprights' => 'users',
5356 'BlockList' => 'users',
5357 'Contributions' => 'users',
5358 'Emailuser' => 'users',
5359 'Listadmins' => 'users',
5360 'Listbots' => 'users',
5361 'Userrights' => 'users',
5363 'Unblock' => 'users',
5364 'Preferences' => 'users',
5365 'ChangeEmail' => 'users',
5366 'ChangePassword' => 'users',
5367 'DeletedContributions' => 'users',
5368 'PasswordReset' => 'users',
5370 'Mostlinked' => 'highuse',
5371 'Mostlinkedcategories' => 'highuse',
5372 'Mostlinkedtemplates' => 'highuse',
5373 'Mostcategories' => 'highuse',
5374 'Mostimages' => 'highuse',
5375 'Mostrevisions' => 'highuse',
5377 'Allpages' => 'pages',
5378 'Prefixindex' => 'pages',
5379 'Listredirects' => 'pages',
5380 'Categories' => 'pages',
5381 'Disambiguations' => 'pages',
5383 'Randompage' => 'redirects',
5384 'Randomredirect' => 'redirects',
5385 'Mypage' => 'redirects',
5386 'Mytalk' => 'redirects',
5387 'Mycontributions' => 'redirects',
5388 'Search' => 'redirects',
5389 'LinkSearch' => 'redirects',
5391 'ComparePages' => 'pagetools',
5392 'Movepage' => 'pagetools',
5393 'MergeHistory' => 'pagetools',
5394 'Revisiondelete' => 'pagetools',
5395 'Undelete' => 'pagetools',
5396 'Export' => 'pagetools',
5397 'Import' => 'pagetools',
5398 'Whatlinkshere' => 'pagetools',
5400 'Statistics' => 'wiki',
5401 'Version' => 'wiki',
5403 'Unlockdb' => 'wiki',
5404 'Allmessages' => 'wiki',
5405 'Popularpages' => 'wiki',
5407 'Specialpages' => 'other',
5408 'Blockme' => 'other',
5409 'Booksources' => 'other',
5410 'JavaScriptTest' => 'other',
5413 /** Whether or not to sort special pages in Special:Specialpages */
5415 $wgSortSpecialPages = true;
5418 * On Special:Unusedimages, consider images "used", if they are put
5419 * into a category. Default (false) is not to count those as used.
5421 $wgCountCategorizedImagesAsUsed = false;
5424 * Maximum number of links to a redirect page listed on
5425 * Special:Whatlinkshere/RedirectDestination
5427 $wgMaxRedirectLinksRetrieved = 500;
5429 /** @} */ # end special pages }
5431 /*************************************************************************//**
5437 * Array of allowed values for the "title=foo&action=<action>" parameter. Syntax is:
5438 * 'foo' => 'ClassName' Load the specified class which subclasses Action
5439 * 'foo' => true Load the class FooAction which subclasses Action
5440 * If something is specified in the getActionOverrides()
5441 * of the relevant Page object it will be used
5442 * instead of the default class.
5443 * 'foo' => false The action is disabled; show an error message
5444 * Unsetting core actions will probably cause things to complain loudly.
5452 'markpatrolled' => true,
5458 'revisiondelete' => true,
5461 'unprotect' => true,
5468 * Array of disabled article actions, e.g. view, edit, delete, etc.
5469 * @deprecated since 1.18; just set $wgActions['action'] = false instead
5471 $wgDisabledActions = array();
5474 * Allow the "info" action, very inefficient at the moment
5476 $wgAllowPageInfo = false;
5478 /** @} */ # end actions }
5480 /*************************************************************************//**
5481 * @name Robot (search engine crawler) policy
5482 * See also $wgNoFollowLinks.
5487 * Default robot policy. The default policy is to encourage indexing and fol-
5488 * lowing of links. It may be overridden on a per-namespace and/or per-page
5491 $wgDefaultRobotPolicy = 'index,follow';
5494 * Robot policies per namespaces. The default policy is given above, the array
5495 * is made of namespace constants as defined in includes/Defines.php. You can-
5496 * not specify a different default policy for NS_SPECIAL: it is always noindex,
5497 * nofollow. This is because a number of special pages (e.g., ListPages) have
5498 * many permutations of options that display the same data under redundant
5499 * URLs, so search engine spiders risk getting lost in a maze of twisty special
5500 * pages, all alike, and never reaching your actual content.
5503 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
5505 $wgNamespaceRobotPolicies = array();
5508 * Robot policies per article. These override the per-namespace robot policies.
5509 * Must be in the form of an array where the key part is a properly canonical-
5510 * ised text form title and the value is a robot policy.
5512 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
5513 * 'User:Bob' => 'index,follow' );
5514 * Example that DOES NOT WORK because the names are not canonical text forms:
5515 * $wgArticleRobotPolicies = array(
5516 * # Underscore, not space!
5517 * 'Main_Page' => 'noindex,follow',
5518 * # "Project", not the actual project name!
5519 * 'Project:X' => 'index,follow',
5520 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
5521 * 'abc' => 'noindex,nofollow'
5524 $wgArticleRobotPolicies = array();
5527 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
5528 * will not function, so users can't decide whether pages in that namespace are
5529 * indexed by search engines. If set to null, default to $wgContentNamespaces.
5531 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
5533 $wgExemptFromUserRobotsControl = null;
5535 /** @} */ # End robot policy }
5537 /************************************************************************//**
5538 * @name AJAX and API
5539 * Note: The AJAX entry point which this section refers to is gradually being
5540 * replaced by the API entry point, api.php. They are essentially equivalent.
5541 * Both of them are used for dynamic client-side features, via XHR.
5546 * Enable the MediaWiki API for convenient access to
5547 * machine-readable data via api.php
5549 * See http://www.mediawiki.org/wiki/API
5551 $wgEnableAPI = true;
5554 * Allow the API to be used to perform write operations
5555 * (page edits, rollback, etc.) when an authorised user
5558 $wgEnableWriteAPI = true;
5561 * API module extensions
5562 * Associative array mapping module name to class name.
5563 * Extension modules may override the core modules.
5565 $wgAPIModules = array();
5566 $wgAPIMetaModules = array();
5567 $wgAPIPropModules = array();
5568 $wgAPIListModules = array();
5571 * Maximum amount of rows to scan in a DB query in the API
5572 * The default value is generally fine
5574 $wgAPIMaxDBRows = 5000;
5577 * The maximum size (in bytes) of an API result.
5578 * Don't set this lower than $wgMaxArticleSize*1024
5580 $wgAPIMaxResultSize = 8388608;
5583 * The maximum number of uncached diffs that can be retrieved in one API
5584 * request. Set this to 0 to disable API diffs altogether
5586 $wgAPIMaxUncachedDiffs = 1;
5589 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
5590 * API request logging
5592 $wgAPIRequestLog = false;
5595 * Set the timeout for the API help text cache. If set to 0, caching disabled
5597 $wgAPICacheHelpTimeout = 60*60;
5600 * Enable AJAX framework
5605 * List of Ajax-callable functions.
5606 * Extensions acting as Ajax callbacks must register here
5608 $wgAjaxExportList = array();
5611 * Enable watching/unwatching pages using AJAX.
5612 * Requires $wgUseAjax to be true too.
5614 $wgAjaxWatch = true;
5617 * Enable AJAX check for file overwrite, pre-upload
5619 $wgAjaxUploadDestCheck = true;
5622 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
5624 $wgAjaxLicensePreview = true;
5627 * Settings for incoming cross-site AJAX requests:
5628 * Newer browsers support cross-site AJAX when the target resource allows requests
5629 * from the origin domain by the Access-Control-Allow-Origin header.
5630 * This is currently only used by the API (requests to api.php)
5631 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
5633 * '*' matches any number of characters
5634 * '?' matches any 1 character
5637 $wgCrossSiteAJAXdomains = array(
5638 'www.mediawiki.org',
5645 $wgCrossSiteAJAXdomains = array();
5648 * Domains that should not be allowed to make AJAX requests,
5649 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
5650 * Uses the same syntax as $wgCrossSiteAJAXdomains
5653 $wgCrossSiteAJAXdomainExceptions = array();
5655 /** @} */ # End AJAX and API }
5657 /************************************************************************//**
5658 * @name Shell and process control
5663 * Maximum amount of virtual memory available to shell processes under linux, in KB.
5665 $wgMaxShellMemory = 102400;
5668 * Maximum file size created by shell processes under linux, in KB
5669 * ImageMagick convert for example can be fairly hungry for scratch space
5671 $wgMaxShellFileSize = 102400;
5674 * Maximum CPU time in seconds for shell processes under linux
5676 $wgMaxShellTime = 180;
5679 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
5681 $wgPhpCli = '/usr/bin/php';
5684 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
5685 * For Unix-like operating systems, set this to to a locale that has a UTF-8
5686 * character set. Only the character set is relevant.
5688 $wgShellLocale = 'en_US.utf8';
5690 /** @} */ # End shell }
5692 /************************************************************************//**
5698 * Timeout for HTTP requests done internally
5700 $wgHTTPTimeout = 25;
5703 * Timeout for Asynchronous (background) HTTP requests
5705 $wgAsyncHTTPTimeout = 25;
5708 * Proxy to use for CURL requests.
5710 $wgHTTPProxy = false;
5712 /** @} */ # End HTTP client }
5714 /************************************************************************//**
5716 * See also $wgEnotifUseJobQ.
5721 * Number of jobs to perform per request. May be less than one in which case
5722 * jobs are performed probabalistically. If this is zero, jobs will not be done
5723 * during ordinary apache requests. In this case, maintenance/runJobs.php should
5724 * be run periodically.
5729 * Number of rows to update per job
5731 $wgUpdateRowsPerJob = 500;
5734 * Number of rows to update per query
5736 $wgUpdateRowsPerQuery = 100;
5738 /** @} */ # End job queue }
5740 /************************************************************************//**
5741 * @name HipHop compilation
5746 * The build directory for HipHop compilation.
5747 * Defaults to $IP/maintenance/hiphop/build.
5749 $wgHipHopBuildDirectory = false;
5752 * The HipHop build type. Can be either "Debug" or "Release".
5754 $wgHipHopBuildType = 'Debug';
5757 * Number of parallel processes to use during HipHop compilation, or "detect"
5758 * to guess from system properties.
5760 $wgHipHopCompilerProcs = 'detect';
5763 * Filesystem extensions directory. Defaults to $IP/../extensions.
5765 * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
5766 * and use code like:
5768 * require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
5770 * to include the extension setup file from LocalSettings.php. It is not
5771 * necessary to set this variable unless you use MWInit::extensionSetupPath().
5773 $wgExtensionsDirectory = false;
5776 * A list of files that should be compiled into a HipHop build, in addition to
5777 * those listed in $wgAutoloadClasses. Add to this array in an extension setup
5778 * file in order to add files to the build.
5780 * The files listed here must either be either absolute paths under $IP or
5781 * under $wgExtensionsDirectory, or paths relative to the virtual source root
5782 * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
5785 $wgCompiledFiles = array();
5787 /** @} */ # End of HipHop compilation }
5790 /************************************************************************//**
5791 * @name Mobile support
5796 * Name of the class used for mobile device detection, must be inherited from
5799 $wgDeviceDetectionClass = 'DeviceDetection';
5801 /** @} */ # End of Mobile support }
5803 /************************************************************************//**
5804 * @name Miscellaneous
5808 /** Name of the external diff engine to use */
5809 $wgExternalDiffEngine = false;
5812 * Disable redirects to special pages and interwiki redirects, which use a 302
5813 * and have no "redirected from" link. Note this is only for articles with #Redirect
5814 * in them. URL's containing a local interwiki prefix (or a non-canonical special
5815 * page name) are still hard redirected regardless of this setting.
5817 $wgDisableHardRedirects = false;
5820 * LinkHolderArray batch size
5823 $wgLinkHolderBatchSize = 1000;
5826 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
5827 * use this value to override:
5829 $wgRegisterInternalExternals = false;
5832 * Maximum number of pages to move at once when moving subpages with a page.
5834 $wgMaximumMovedPages = 100;
5837 * Fix double redirects after a page move.
5838 * Tends to conflict with page move vandalism, use only on a private wiki.
5840 $wgFixDoubleRedirects = false;
5843 * Allow redirection to another page when a user logs in.
5844 * To enable, set to a string like 'Main Page'
5846 $wgRedirectOnLogin = null;
5849 * Configuration for processing pool control, for use in high-traffic wikis.
5850 * An implementation is provided in the PoolCounter extension.
5852 * This configuration array maps pool types to an associative array. The only
5853 * defined key in the associative array is "class", which gives the class name.
5854 * The remaining elements are passed through to the class as constructor
5855 * parameters. Example:
5857 * $wgPoolCounterConf = array( 'ArticleView' => array(
5858 * 'class' => 'PoolCounter_Client',
5859 * 'timeout' => 15, // wait timeout in seconds
5860 * 'workers' => 5, // maximum number of active threads in each pool
5861 * 'maxqueue' => 50, // maximum number of total threads in each pool
5862 * ... any extension-specific options...
5865 $wgPoolCounterConf = null;
5868 * To disable file delete/restore temporarily
5870 $wgUploadMaintenance = false;
5873 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
5875 $wgEnableSelenium = false;
5876 $wgSeleniumTestConfigs = array();
5877 $wgSeleniumConfigFile = null;
5878 $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
5879 $wgDBtestpassword = '';
5882 * For really cool vim folding this needs to be at the end:
5883 * vim: foldmarker=@{,@} foldmethod=marker